Move architecture-specific includes to arch/$ARCH/include/asm

This helps to clean up the include/ directory so that it only contains
non-architecture-specific headers and also matches Linux's directory
layout which many U-Boot developers are already familiar with.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 0 insertions, 99 deletions

diff --git a/include/asm-arm/arch-davinci/i2c_defs.h b/include/asm-arm/arch-davinci/i2c_defs.h
deleted file mode 100644
index 24cd268b95..0000000000
--- a/include/asm-arm/arch-davinci/i2c_defs.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- *
- * Some changes copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _DAVINCI_I2C_H_
-#define _DAVINCI_I2C_H_
-
-#define I2C_WRITE		0
-#define I2C_READ		1
-
-#ifndef CONFIG_SOC_DA8XX
-#define I2C_BASE		0x01c21000
-#else
-#define I2C_BASE		0x01c22000
-#endif
-
-#define	I2C_OA			(I2C_BASE + 0x00)
-#define I2C_IE			(I2C_BASE + 0x04)
-#define I2C_STAT		(I2C_BASE + 0x08)
-#define I2C_SCLL		(I2C_BASE + 0x0c)
-#define I2C_SCLH		(I2C_BASE + 0x10)
-#define I2C_CNT			(I2C_BASE + 0x14)
-#define I2C_DRR			(I2C_BASE + 0x18)
-#define I2C_SA			(I2C_BASE + 0x1c)
-#define I2C_DXR			(I2C_BASE + 0x20)
-#define I2C_CON			(I2C_BASE + 0x24)
-#define I2C_IV			(I2C_BASE + 0x28)
-#define I2C_PSC			(I2C_BASE + 0x30)
-
-/* I2C masks */
-
-/* I2C Interrupt Enable Register (I2C_IE): */
-#define I2C_IE_SCD_IE	(1 << 5)	/* Stop condition detect interrupt enable */
-#define I2C_IE_XRDY_IE	(1 << 4)	/* Transmit data ready interrupt enable */
-#define I2C_IE_RRDY_IE	(1 << 3)	/* Receive data ready interrupt enable */
-#define I2C_IE_ARDY_IE	(1 << 2)	/* Register access ready interrupt enable */
-#define I2C_IE_NACK_IE	(1 << 1)	/* No acknowledgment interrupt enable */
-#define I2C_IE_AL_IE	(1 << 0)	/* Arbitration lost interrupt enable */
-
-/* I2C Status Register (I2C_STAT): */
-
-#define I2C_STAT_BB	(1 << 12)	/* Bus busy */
-#define I2C_STAT_ROVR	(1 << 11)	/* Receive overrun */
-#define I2C_STAT_XUDF	(1 << 10)	/* Transmit underflow */
-#define I2C_STAT_AAS	(1 << 9)	/* Address as slave */
-#define I2C_STAT_SCD	(1 << 5)	/* Stop condition detect */
-#define I2C_STAT_XRDY	(1 << 4)	/* Transmit data ready */
-#define I2C_STAT_RRDY	(1 << 3)	/* Receive data ready */
-#define I2C_STAT_ARDY	(1 << 2)	/* Register access ready */
-#define I2C_STAT_NACK	(1 << 1)	/* No acknowledgment interrupt enable */
-#define I2C_STAT_AL	(1 << 0)	/* Arbitration lost interrupt enable */
-
-
-/* I2C Interrupt Code Register (I2C_INTCODE): */
-
-#define I2C_INTCODE_MASK	7
-#define I2C_INTCODE_NONE	0
-#define I2C_INTCODE_AL		1	/* Arbitration lost */
-#define I2C_INTCODE_NAK		2	/* No acknowledgement/general call */
-#define I2C_INTCODE_ARDY	3	/* Register access ready */
-#define I2C_INTCODE_RRDY	4	/* Rcv data ready */
-#define I2C_INTCODE_XRDY	5	/* Xmit data ready */
-#define I2C_INTCODE_SCD		6	/* Stop condition detect */
-
-
-/* I2C Configuration Register (I2C_CON): */
-
-#define I2C_CON_EN	(1 << 5)	/* I2C module enable */
-#define I2C_CON_STB	(1 << 4)	/* Start byte mode (master mode only) */
-#define I2C_CON_MST	(1 << 10)	/* Master/slave mode */
-#define I2C_CON_TRX	(1 << 9)	/* Transmitter/receiver mode (master mode only) */
-#define I2C_CON_XA	(1 << 8)	/* Expand address */
-#define I2C_CON_STP	(1 << 11)	/* Stop condition (master mode only) */
-#define I2C_CON_STT	(1 << 13)	/* Start condition (master mode only) */
-#define I2C_CON_FREE	(1 << 14)	/* Free run on emulation */
-
-#define I2C_TIMEOUT	0xffff0000	/* Timeout mask for poll_i2c_irq() */
-
-#endif