OMAP3: Add I2C support

Add I2C support.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>

1 files changed, 128 insertions, 0 deletions

diff --git a/include/asm-arm/arch-omap3/i2c.h b/include/asm-arm/arch-omap3/i2c.h
new file mode 100644
index 0000000000..3937f35256
--- /dev/null
+++ b/include/asm-arm/arch-omap3/i2c.h
@@ -0,0 +1,128 @@
+/*
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _I2C_H_
+#define _I2C_H_
+
+#define I2C_DEFAULT_BASE	I2C_BASE1
+
+#define I2C_REV		(I2C_DEFAULT_BASE + 0x00)
+#define I2C_IE 		(I2C_DEFAULT_BASE + 0x04)
+#define I2C_STAT	(I2C_DEFAULT_BASE + 0x08)
+#define I2C_IV 		(I2C_DEFAULT_BASE + 0x0c)
+#define I2C_BUF		(I2C_DEFAULT_BASE + 0x14)
+#define I2C_CNT		(I2C_DEFAULT_BASE + 0x18)
+#define I2C_DATA	(I2C_DEFAULT_BASE + 0x1c)
+#define I2C_SYSC	(I2C_DEFAULT_BASE + 0x20)
+#define I2C_CON		(I2C_DEFAULT_BASE + 0x24)
+#define I2C_OA 		(I2C_DEFAULT_BASE + 0x28)
+#define I2C_SA 		(I2C_DEFAULT_BASE + 0x2c)
+#define I2C_PSC		(I2C_DEFAULT_BASE + 0x30)
+#define I2C_SCLL	(I2C_DEFAULT_BASE + 0x34)
+#define I2C_SCLH	(I2C_DEFAULT_BASE + 0x38)
+#define I2C_SYSTEST	(I2C_DEFAULT_BASE + 0x3c)
+
+/* I2C masks */
+
+/* I2C Interrupt Enable Register (I2C_IE): */
+#define I2C_IE_GC_IE	(1 << 5)
+#define I2C_IE_XRDY_IE	(1 << 4) /* Transmit data ready interrupt enable */
+#define I2C_IE_RRDY_IE	(1 << 3) /* Receive data ready interrupt enable */
+#define I2C_IE_ARDY_IE	(1 << 2) /* Register access ready interrupt enable */
+#define I2C_IE_NACK_IE	(1 << 1) /* No acknowledgment interrupt enable */
+#define I2C_IE_AL_IE	(1 << 0) /* Arbitration lost interrupt enable */
+
+/* I2C Status Register (I2C_STAT): */
+
+#define I2C_STAT_SBD	(1 << 15) /* Single byte data */
+#define I2C_STAT_BB	(1 << 12) /* Bus busy */
+#define I2C_STAT_ROVR	(1 << 11) /* Receive overrun */
+#define I2C_STAT_XUDF	(1 << 10) /* Transmit underflow */
+#define I2C_STAT_AAS	(1 << 9)  /* Address as slave */
+#define I2C_STAT_GC	(1 << 5)
+#define I2C_STAT_XRDY	(1 << 4)  /* Transmit data ready */
+#define I2C_STAT_RRDY	(1 << 3)  /* Receive data ready */
+#define I2C_STAT_ARDY	(1 << 2)  /* Register access ready */
+#define I2C_STAT_NACK	(1 << 1)  /* No acknowledgment interrupt enable */
+#define I2C_STAT_AL	(1 << 0)  /* Arbitration lost interrupt enable */
+
+/* I2C Interrupt Code Register (I2C_INTCODE): */
+
+#define I2C_INTCODE_MASK	7
+#define I2C_INTCODE_NONE	0
+#define I2C_INTCODE_AL		1	/* Arbitration lost */
+#define I2C_INTCODE_NAK		2	/* No acknowledgement/general call */
+#define I2C_INTCODE_ARDY	3	/* Register access ready */
+#define I2C_INTCODE_RRDY	4	/* Rcv data ready */
+#define I2C_INTCODE_XRDY	5	/* Xmit data ready */
+
+/* I2C Buffer Configuration Register (I2C_BUF): */
+
+#define I2C_BUF_RDMA_EN		(1 << 15) /* Receive DMA channel enable */
+#define I2C_BUF_XDMA_EN		(1 << 7)  /* Transmit DMA channel enable */
+
+/* I2C Configuration Register (I2C_CON): */
+
+#define I2C_CON_EN	(1 << 15)  /* I2C module enable */
+#define I2C_CON_BE	(1 << 14)  /* Big endian mode */
+#define I2C_CON_STB	(1 << 11)  /* Start byte mode (master mode only) */
+#define I2C_CON_MST	(1 << 10)  /* Master/slave mode */
+#define I2C_CON_TRX	(1 << 9)   /* Transmitter/receiver mode */
+				   /* (master mode only) */
+#define I2C_CON_XA	(1 << 8)   /* Expand address */
+#define I2C_CON_STP	(1 << 1)   /* Stop condition (master mode only) */
+#define I2C_CON_STT	(1 << 0)   /* Start condition (master mode only) */
+
+/* I2C System Test Register (I2C_SYSTEST): */
+
+#define I2C_SYSTEST_ST_EN	(1 << 15) /* System test enable */
+#define I2C_SYSTEST_FREE	(1 << 14) /* Free running mode, on brkpoint) */
+#define I2C_SYSTEST_TMODE_MASK	(3 << 12) /* Test mode select */
+#define I2C_SYSTEST_TMODE_SHIFT	(12)	  /* Test mode select */
+#define I2C_SYSTEST_SCL_I	(1 << 3)  /* SCL line sense input value */
+#define I2C_SYSTEST_SCL_O	(1 << 2)  /* SCL line drive output value */
+#define I2C_SYSTEST_SDA_I	(1 << 1)  /* SDA line sense input value */
+#define I2C_SYSTEST_SDA_O	(1 << 0)  /* SDA line drive output value */
+
+#define I2C_SCLL_SCLL		0
+#define I2C_SCLL_SCLL_M		0xFF
+#define I2C_SCLL_HSSCLL		8
+#define I2C_SCLH_HSSCLL_M	0xFF
+#define I2C_SCLH_SCLH		0
+#define I2C_SCLH_SCLH_M		0xFF
+#define I2C_SCLH_HSSCLH		8
+#define I2C_SCLH_HSSCLH_M	0xFF
+
+#define OMAP_I2C_STANDARD	100
+#define OMAP_I2C_FAST_MODE	400
+#define OMAP_I2C_HIGH_SPEED	3400
+
+#define SYSTEM_CLOCK_12		12000
+#define SYSTEM_CLOCK_13		13000
+#define SYSTEM_CLOCK_192	19200
+#define SYSTEM_CLOCK_96		96000
+
+#define I2C_IP_CLK		SYSTEM_CLOCK_96
+#define I2C_PSC_MAX		0x0f
+#define I2C_PSC_MIN		0x00
+
+#endif /* _I2C_H_ */