summaryrefslogtreecommitdiff
path: root/include/asm-arm
diff options
context:
space:
mode:
authorMarkus Klotzbücher <Markus Klotzbümk@pollux.(none)>2006-02-07 20:04:48 +0100
committerMarkus Klotzbücher <mk@pollux.(none)>2006-02-07 20:04:48 +0100
commite0269579a5b546b8f4e9ede82dc1cc3fa3796e02 (patch)
tree0ac8cf5589a58887a22afd25a4fb4abdc288f643 /include/asm-arm
parent57cac1fa547fa590fe4b7992619b9f26417014c3 (diff)
This is the first commit for the u-boot zylonite port. The following has be
done so far: * created zylonite board dir (based on lubbock) * extended some - but not all pxa sources and headers for Intel Monahans support (CONFIG_CPU_MONAHANS) * created Makefile zylonite target + MAKEALL entry * added some debug nonsense, remove later, grep for mk@tbd Status: compiles (eldk-4.0), and can be started with BDI, but runs forever and doesn't halt at breakpoints. Hmmm...
Diffstat (limited to 'include/asm-arm')
-rw-r--r--include/asm-arm/arch-pxa/hardware.h155
-rw-r--r--include/asm-arm/arch-pxa/pxa-regs.h2674
2 files changed, 2216 insertions, 613 deletions
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
index 3ff1d26145..a12aea14c4 100644
--- a/include/asm-arm/arch-pxa/hardware.h
+++ b/include/asm-arm/arch-pxa/hardware.h
@@ -8,11 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Note: This file was taken from linux-2.4.19-rmk4-pxa1
- *
- * - 2003/01/20 implementation specifics activated
- * Robert Schwebel <r.schwebel@pengutronix.de>
*/
#ifndef __ASM_ARCH_HARDWARE_H
@@ -21,16 +16,6 @@
#include <linux/config.h>
#include <asm/mach-types.h>
-
-/*
- * These are statically mapped PCMCIA IO space for designs using it as a
- * generic IO bus, typically with ISA parts, hardwired IDE interfaces, etc.
- * The actual PCMCIA code is mapping required IO region at run time.
- */
-#define PCMCIA_IO_0_BASE 0xf6000000
-#define PCMCIA_IO_1_BASE 0xf7000000
-
-
/*
* We requires absolute addresses.
*/
@@ -44,22 +29,63 @@
#define UNCACHED_ADDR UNCACHED_PHYS_0
/*
- * Intel PXA internal I/O mappings:
+ * Intel PXA2xx internal register mapping:
*
- * 0x40000000 - 0x41ffffff <--> 0xf8000000 - 0xf9ffffff
- * 0x44000000 - 0x45ffffff <--> 0xfa000000 - 0xfbffffff
- * 0x48000000 - 0x49ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
+ * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
+ * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
+ *
+ * Note that not all PXA2xx chips implement all those addresses, and the
+ * kernel only maps the minimum needed range of this mapping.
+ */
+#ifndef CONFIG_CPU_MONAHANS
+#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
+#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+#else
+
+/* There are too many IO area needed to map, so I divide them into 3 areas
+ * 0x40000000 - 0x41ffffff <--> 0xf6000000 - 0xf7ffffff Devs
*/
+#define io_p2v(x) ((((x) & 0xfc000000)>>4) + 0xf2000000 + ((x)&0x01ffffff))
+#define io_v2p(x) (((((x) - 0xf2000000)&0xfc000000)<<4) + ((x)&0x01ffffff))
-/* FIXME: Only this does work for u-boot... find out why... [RS] */
-#define UBOOT_REG_FIX 1
+/*
+ * 0x42000000 - 0x421fffff <--> 0xf8000000 - 0xf81fffff MMC2 & USIM2
+ * 0x43000000 - 0x430fffff <--> 0xf8200000 - 0xf82fffff Caddo
+ * 0x43100000 - 0x431fffff <--> 0xf8300000 - 0xf83fffff NAND
+ * 0x44000000 - 0x440fffff <--> 0xf8400000 - 0xf84fffff LCD
+ * 0x46000000 - 0x460fffff <--> 0xf8800000 - 0xf88fffff Mini LCD
+ * 0x48100000 - 0x481fffff <--> 0xf8d00000 - 0xf8dfffff Dynamic Mem Ctl
+ * 0x4a000000 - 0x4a0fffff <--> 0xf9000000 - 0xf90fffff Static Mem Ctl
+ * 0x4c000000 - 0x4c0fffff <--> 0xf9400000 - 0xf94fffff USB Host
+ */
-#ifndef UBOOT_REG_FIX
-#ifndef __ASSEMBLY__
+#define io_p2v_2(x) (((((x) - 0x42000000) & 0xff000000) >> 3) + 0xf8000000\
+ + ((x) & 0x001fffff))
+#define io_v2p_2(x) (((((x) & 0xffe00000) - 0xf8000000) << 3) + 0x42000000\
+ + (x & 0x001fffff))
+/*
+ * 0x50000000 - 0x500fffff <--> 0xfa000000 - 0xfa0fffff Camera Interface
+ * 0x54000000 - 0x540fffff <--> 0xfa400000 - 0xfa4fffff 2D Graphics Ctrl
+ * 0x54100000 - 0x541fffff <--> 0xfa500000 - 0xfa5fffff USB Device 2.0 Ctrl
+ * 0x58000000 - 0x580fffff <--> 0xfa800000 - 0xfa8fffff Internal SRAM Ctrl
+ */
+
+#define io_p2v_3(x) ((((x) & 0xfc000000) >> 4) + 0xf5000000 + \
+ ((x) & 0x001fffff))
+#define io_v2p_3(x) (((((x) - 0xf5000000) & 0x0fc00000) << 4) + \
+ ((x) & 0x001fffff))
+#endif /* CONFIG_CPU_MONAHANS */
-#define io_p2v(x) ( ((x) | 0xbe000000) ^ (~((x) >> 1) & 0x06000000) )
-#define io_v2p( x ) ( ((x) & 0x41ffffff) ^ ( ((x) & 0x06000000) << 1) )
+#ifndef __ASSEMBLY__
+#if 0
+# define __REG(x) (*((volatile u32 *)io_p2v(x)))
+#else
/*
* This __REG() version gives the same results as the one above, except
* that we are fooling gcc somehow so it generates far better and smaller
@@ -70,62 +96,56 @@
typedef struct { volatile u32 offset[4096]; } __regbase;
# define __REGP(x) ((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
# define __REG(x) __REGP(io_p2v(x))
-#endif
-/* Let's kick gcc's ass again... */
-# define __REG2(x,y) \
- ( __builtin_constant_p(y) ? (__REG((x) + (y))) \
- : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
+/* __REG_2 is for NAND, LCD etc.
+ * __REG_3 is for Camera Interface, 2D Graphics, U2D etc.*/
+#ifdef CONFIG_CPU_MONAHANS
+#define __REG_2(x) __REGP(io_p2v_2(x))
+#define __REG_3(x) __REGP(io_p2v_3(x))
+
+#endif /* CONFIG_CPU_MONAHANS */
+#endif /* if 0 */
+
+/* With indexed regs we don't want to feed the index through io_p2v()
+ especially if it is a variable, otherwise horrible code will result. */
+# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
# define __PREG(x) (io_v2p((u32)&(x)))
-#else
+#else /* ifndef __ASSEMBLY__ */
# define __REG(x) io_p2v(x)
# define __PREG(x) io_v2p(x)
-# undef io_p2v
-# undef __REG
-# ifndef __ASSEMBLY__
-# define io_p2v(PhAdd) (PhAdd)
-# define __REG(x) (*((volatile u32 *)io_p2v(x)))
-# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
-# else
-# define __REG(x) (x)
-# endif
-#endif /* UBOOT_REG_FIX */
+#ifdef CONFIG_CPU_MONAHANS
+# define __REG_2(x) io_p2v(x)
+# define __REG_3(x) io_p2v(x)
+#endif /* CONFIG_CPU_MONAHANS */
-#include "pxa-regs.h"
+#endif /* ifndef __ASSEMBLY__ */
#ifndef __ASSEMBLY__
-/*
- * GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * This must be called *before* the corresponding IRQ is registered.
- * Use this instead of directly setting GRER/GFER.
- */
-#define GPIO_FALLING_EDGE 1
-#define GPIO_RISING_EDGE 2
-#define GPIO_BOTH_EDGES 3
-extern void set_GPIO_IRQ_edge( int gpio_nr, int edge_mask );
+#ifdef CONFIG_MACH_ZYLONITE
+#include "zylonite.h"
+#endif
/*
* Handy routine to set GPIO alternate functions
*/
-extern void set_GPIO_mode( int gpio_mode );
+extern void pxa_gpio_mode( int gpio_mode );
/*
- * return current lclk frequency in units of 10kHz
+ * Routine to enable or disable CKEN
*/
-extern unsigned int get_lclk_frequency_10khz(void);
-
-#endif
-
+extern void pxa_set_cken(int clock, int enable);
/*
- * Implementation specifics
+ * return current memory and LCD clock frequency in units of 10kHz
*/
+extern unsigned int get_memclk_frequency_10khz(void);
+extern unsigned int get_lcdclk_frequency_10khz(void);
+#endif /* __ASSEMBLY__ */
#ifdef CONFIG_ARCH_LUBBOCK
#include "lubbock.h"
@@ -139,6 +159,15 @@ extern unsigned int get_lclk_frequency_10khz(void);
#include "cerf.h"
#endif
+#if CONFIG_CPU_MONAHANS_L2CACHE
+#define __cpuc_flush_l2cache_all xscale_flush_l2cache_all
+extern void __cpuc_flush_l2cache_all(void);
+#define flush_l2cache_all __cpuc_flush_l2cache_all
+#else
+#define __cpuc_flush_l2cache_all() do {} while (0)
+#define flush_l2cache_all() do {} while (0)
+#endif
+
#ifdef CONFIG_ARCH_CSB226
#include "csb226.h"
#endif
@@ -151,4 +180,10 @@ extern unsigned int get_lclk_frequency_10khz(void);
#include "pleb.h"
#endif
-#endif /* _ASM_ARCH_HARDWARE_H */
+#ifdef CONFIG_MACH_MAINSTONE
+#include "mainstone.h"
+#endif
+
+#include "pxa-regs.h"
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 41d37d791a..3e59f89063 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -5,16 +5,15 @@
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
*
+ * Copyright (C) 2004, Intel Corporation.
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * - 2003/01/20: Robert Schwebel <r.schwebel@pengutronix.de
- * Original file taken from linux-2.4.19-rmk4-pxa1. Added some definitions.
- * Added include for hardware.h (for __REG definition)
*/
-#ifndef _PXA_REGS_H_
-#define _PXA_REGS_H_
+
+#ifndef __PXA_REGS_H
+#define __PXA_REGS_H
#include "bitfield.h"
#include "hardware.h"
@@ -33,53 +32,69 @@ typedef void (*ExcpHndlr) (void) ;
/*
* PXA Chip selects
*/
+#ifdef CONFIG_CPU_MONAHANS
+#define PXA_CS0_PHYS 0x00000000 /* for both small and large same start */
+#define PXA_CS1_PHYS 0x04000000 /* Small partition start address (64MB) */
+#define PXA_CS1_LPHYS 0x30000000 /* Large partition start address (256MB) */
+#define PXA_CS2_PHYS 0x10000000 /* (64MB) */
+#define PXA_CS3_PHYS 0x14000000 /* (64MB) */
+#define PXA_PCMCIA_PHYS 0x20000000 /* (256MB) */
+#else
#define PXA_CS0_PHYS 0x00000000
#define PXA_CS1_PHYS 0x04000000
#define PXA_CS2_PHYS 0x08000000
#define PXA_CS3_PHYS 0x0C000000
#define PXA_CS4_PHYS 0x10000000
#define PXA_CS5_PHYS 0x14000000
+#endif /* CONFIG_CPU_MONAHANS */
/*
* Personal Computer Memory Card International Association (PCMCIA) sockets
*/
+
#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
-#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
-#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
+#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
+#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
-#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
+#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
-#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
-#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
+#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
+#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
-#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
+#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
-#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
-#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
+#ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */
+#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
+#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
-#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
-
-#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
- (0x20000000 + (Nb)*PCMCIASp)
-#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
-#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
- (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
-#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
- (_PCMCIA (Nb) + 3*PCMCIAPrtSp)
-
-#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
-#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
-#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
-#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
-
-#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
-#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
-#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
-#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
+#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
+#endif
+
+#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
+ (0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
+#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
+ (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
+ (_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
+#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
+#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
+#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
+
+#ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */
+#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
+#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
+#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
+#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
+#endif
+
/*
* DMA Controller
*/
+
#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */
#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */
#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */
@@ -96,6 +111,22 @@ typedef void (*ExcpHndlr) (void) ;
#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */
#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */
#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */
+#define DCSR16 __REG(0x40000040) /* DMA Control / Status Register for Channel 16 */
+#define DCSR17 __REG(0x40000044) /* DMA Control / Status Register for Channel 17 */
+#define DCSR18 __REG(0x40000048) /* DMA Control / Status Register for Channel 18 */
+#define DCSR19 __REG(0x4000004c) /* DMA Control / Status Register for Channel 19 */
+#define DCSR20 __REG(0x40000050) /* DMA Control / Status Register for Channel 20 */
+#define DCSR21 __REG(0x40000054) /* DMA Control / Status Register for Channel 21 */
+#define DCSR22 __REG(0x40000058) /* DMA Control / Status Register for Channel 22 */
+#define DCSR23 __REG(0x4000005c) /* DMA Control / Status Register for Channel 23 */
+#define DCSR24 __REG(0x40000060) /* DMA Control / Status Register for Channel 24 */
+#define DCSR25 __REG(0x40000064) /* DMA Control / Status Register for Channel 25 */
+#define DCSR26 __REG(0x40000068) /* DMA Control / Status Register for Channel 26 */
+#define DCSR27 __REG(0x4000006c) /* DMA Control / Status Register for Channel 27 */
+#define DCSR28 __REG(0x40000070) /* DMA Control / Status Register for Channel 28 */
+#define DCSR29 __REG(0x40000074) /* DMA Control / Status Register for Channel 29 */
+#define DCSR30 __REG(0x40000078) /* DMA Control / Status Register for Channel 30 */
+#define DCSR31 __REG(0x4000007c) /* DMA Control / Status Register for Channel 31 */
#define DCSR(x) __REG2(0x40000000, (x) << 2)
@@ -103,14 +134,14 @@ typedef void (*ExcpHndlr) (void) ;
#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
-#if defined(CONFIG_PXA27X)
-#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
-#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
-#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
-#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
-#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
-#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
-#define DCSR_ENRINTR (1 << 9) /* The end of Receive */
+#if defined (CONFIG_PXA27X) || defined (CONFIG_CPU_MONAHANS)
+#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
+#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
+#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
+#define DCSR_EORINTR (1 << 9) /* The end of Receive */
#endif
#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
@@ -119,8 +150,18 @@ typedef void (*ExcpHndlr) (void) ;
#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
+#ifdef CONFIG_CPU_MONAHANS
+#define DPCSR __REG(0x400000a4) /* DMA Programmed IO control status register */
+#define DRQSR0 __REG(0x400000e0) /* DMA DREQ<0> Status Register */
+#define DRQSR1 __REG(0x400000e4) /* DMA DREQ<1> Status Register */
+#define DRQSR2 __REG(0x400000e8) /* DMA DREQ<2> Status Register */
+
+#define DALGN __REG(0x400000a0) /* DMA Alignment Register */
+#endif /* CONFIG_CPU_MONAHANS */
+
#define DINT __REG(0x400000f0) /* DMA Interrupt Register */
+#define DRCMR(n) __REG2(0x40000100, (n)<<2)
#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */
#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */
#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */
@@ -142,29 +183,75 @@ typedef void (*ExcpHndlr) (void) ;
#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */
#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */
#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */
-#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */
-#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */
+#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC/SDIO 1 receive Request */
+#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC/SDIO 2 transmit Request */
#define DRCMR23 __REG(0x4000015c) /* Reserved */
-#define DRCMR24 __REG(0x40000160) /* Reserved */
+#define DRCMR24 __REG(0x40000160) /* Request to Channel Map Register for USB endpoint 0 request */
#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */
#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */
#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */
#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */
-#define DRCMR29 __REG(0x40000174) /* Reserved */
+#define DRCMR29 __REG(0x40000174) /* Request to Channel Map Register for USB endpoint 5 Request */
#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */
#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */
#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */
#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */
-#define DRCMR34 __REG(0x40000188) /* Reserved */
+#define DRCMR34 __REG(0x40000188) /* Request to Channel Map Register for USB endpoint 10 Request */
#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */
#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */
#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */
#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */
-#define DRCMR39 __REG(0x4000019C) /* Reserved */
+#define DRCMR39 __REG(0x4000019C) /* Request to Channel Map Register for USB endpoint 15 Request */
+#define DRCMR40 __REG(0x400001A0) /* Request to Channel Map Register for USB endpoint 15 Request */
+#define DRCMR41 __REG(0x400001A4) /* Request to Channel Map Register for USB endpoint 15 Request */
+#define DRCMR42 __REG(0x400001A8) /* Request to Channel Map Register for USB endpoint 15 Request */
+#define DRCMR43 __REG(0x400001AC) /* Request to Channel Map Register for USB endpoint 15 Request */
+#define DRCMR44 __REG(0x400001B0) /* Request to Channel Map Register for USB endpoint 15 Request */
+#define DRCMR45 __REG(0x400001B4) /* Request to Channel Map Register for USB endpoint 15 Request */
+#define DRCMR46 __REG(0x400001B8) /* Request to Channel Map Register for USB endpoint 15 Request */
+#define DRCMR47 __REG(0x400001BC) /* Request to Channel Map Register for USB endpoint 15 Request */
+#define DRCMR48 __REG(0x400001C0) /* Request to Channel Map Register for MSL Receive Request 1 */
+#define DRCMR49 __REG(0x400001C4) /* Request to Channel Map Register for MSL Transmit Request 1 */
+#define DRCMR50 __REG(0x400001C8) /* Request to Channel Map Register for MSL Receive Request 2 */
+#define DRCMR51 __REG(0x400001CC) /* Request to Channel Map Register for MSL Transmit Request 2 */
+#define DRCMR52 __REG(0x400001D0) /* Request to Channel Map Register for MSL Receive Request 3 */
+#define DRCMR53 __REG(0x400001D4) /* Request to Channel Map Register for MSL Transmit Request 3 */
+#define DRCMR54 __REG(0x400001D8) /* Request to Channel Map Register for MSL Receive Request 4 */
+#define DRCMR55 __REG(0x400001DC) /* Request to Channel Map Register for MSL Transmit Request 4 */
+#define DRCMR56 __REG(0x400001E0) /* Request to Channel Map Register for MSL Receive Request 5 */
+#define DRCMR57 __REG(0x400001E4) /* Request to Channel Map Register for MSL Transmit Request 5 */
+#define DRCMR58 __REG(0x400001E8) /* Request to Channel Map Register for MSL Receive Request 6 */
+#define DRCMR59 __REG(0x400001EC) /* Request to Channel Map Register for MSL Transmit Request 6 */
+#define DRCMR60 __REG(0x400001F0) /* Request to Channel Map Register for MSL Receive Request 7 */
+#define DRCMR61 __REG(0x400001F4) /* Request to Channel Map Register for MSL Transmit Request 7 */
+#define DRCMR62 __REG(0x400001F8) /* Request to Channel Map Register for USIM 1 Receive Request */
+#define DRCMR63 __REG(0x400001FC) /* Request to Channel Map Register for USIM 1 Transimit Request */
+
+#define DRCMR64 __REG(0x40001100) /* Reserved */
+#define DRCMR65 __REG(0x40001104) /* Reserved */
+#define DRCMR66 __REG(0x40001108) /* Request to channel Map Register for SSP3 Receive Request */
+#define DRCMR67 __REG(0x4000110C) /* Request to channel Map Register for SSP3 Receive Request */
+
+#define DRCMR68 __REG(0x40001110) /* Reserved */
+#define DRCMR69 __REG(0x40001114) /* Reserved */
+#define DRCMR70 __REG(0x40001118) /* Reserved */
+
+#define DRCMR71 __REG(0x4000111C) /* Request to Channel Map Register for TPM Receive Request */
+#define DRCMR72 __REG(0x40001120) /* Request to Channel Map Register for TPM Transmit Request 1 */
+#define DRCMR73 __REG(0x40001124) /* Request to Channel Map Register for TPM Transmit Request 2 */
+#define DRCMR74 __REG(0x40001128) /* Request to Channel Map Register for DREQ<2> */
+
+#define DRCMR91 __REG(0x4000116C) /* Request to Channel Map Register for USIM 2 Receive Request */
+#define DRCMR92 __REG(0x40001170) /* Request to Channel Map Register for USIM 2 Transmit Request */
+
+#define DRCMR93 __REG(0x40001174) /* Request to Channel Map Register for MMC Controller 1 Request */
+#define DRCMR94 __REG(0x40001178) /* Request to Channel Map Register for MMC Controller 2 Request */
+#define DRCMR95 __REG(0x4000117C) /* Request to Channel Map Register for AC97 Surround Transmit Request */
+#define DRCMR96 __REG(0x40001180) /* Request to Channel Map Register for AC97 centre/LFE Transmit Request */
+#define DRCMR97 __REG(0x40001184) /* Request to Channel Map Register for NAND interface data transmit & receive Request */
+#define DRCMR98 __REG(0x40001188) /* Reserved */
+#define DRCMR99 __REG(0x4000118C) /* Request to Channel Map Register for NAND interface command transmit Request */
-#define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */
-#define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */
-#define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */
#define DRCMRRXSADR DRCMR2
#define DRCMRTXSADR DRCMR3
@@ -185,9 +272,12 @@ typedef void (*ExcpHndlr) (void) ;
#define DRCMRTXSTTHR DRCMR20
#define DRCMRRXMMC DRCMR21
#define DRCMRTXMMC DRCMR22
+#define DRCMRRXMMC2 DRCMR93
+#define DRCMRTXMMC2 DRCMR94
+#define DRCMRUDC(x) DRCMR((x) + 24)
#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
-#define DRCMR_CHLNUM 0x0f /* mask for Channel Number (read / write) */
+#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */
#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */
@@ -262,11 +352,11 @@ typedef void (*ExcpHndlr) (void) ;
#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
#define DDADR_STOP (1 << 0) /* Stop (read / write) */
-#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
-#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
+#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
-#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
+#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
@@ -282,9 +372,11 @@ typedef void (*ExcpHndlr) (void) ;
#define DCMD_RXMCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
#define DCMD_TXPCDR (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4)
+
/*
* UARTs
*/
+
/* Full Function UART (FFUART) */
#define FFUART FFRBR
#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
@@ -377,7 +469,7 @@ typedef void (*ExcpHndlr) (void) ;
#define LSR_OE (1 << 1) /* Overrun Error */
#define LSR_DR (1 << 0) /* Data Ready */
-#define MCR_LOOP (1 << 4) */
+#define MCR_LOOP (1 << 4)
#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
#define MCR_RTS (1 << 1) /* Request to Send */
@@ -395,6 +487,13 @@ typedef void (*ExcpHndlr) (void) ;
/*
* IrSR (Infrared Selection Register)
*/
+#ifdef CONFIG_CPU_MONAHANS
+#define STISR_RXPL (1 << 4) /* Receive Data Polarity */
+#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */
+#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */
+#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */
+#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */
+#else
#define IrSR_OFFSET 0x20
#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
@@ -409,85 +508,85 @@ typedef void (*ExcpHndlr) (void) ;
#define IrSR_XMITIR_UART_MODE 0x0
#define IrSR_IR_RECEIVE_ON (\
- IrSR_RXPL_NEG_IS_ZERO | \
- IrSR_TXPL_POS_IS_ZERO | \
- IrSR_XMODE_PULSE_3_16 | \
- IrSR_RCVEIR_IR_MODE | \
- IrSR_XMITIR_UART_MODE)
+ IrSR_RXPL_NEG_IS_ZERO | \
+ IrSR_TXPL_POS_IS_ZERO | \
+ IrSR_XMODE_PULSE_3_16 | \
+ IrSR_RCVEIR_IR_MODE | \
+ IrSR_XMITIR_UART_MODE)
#define IrSR_IR_TRANSMIT_ON (\
- IrSR_RXPL_NEG_IS_ZERO | \
- IrSR_TXPL_POS_IS_ZERO | \
- IrSR_XMODE_PULSE_3_16 | \
- IrSR_RCVEIR_UART_MODE | \
- IrSR_XMITIR_IR_MODE)
+ IrSR_RXPL_NEG_IS_ZERO | \
+ IrSR_TXPL_POS_IS_ZERO | \
+ IrSR_XMODE_PULSE_3_16 | \
+ IrSR_RCVEIR_UART_MODE | \
+ IrSR_XMITIR_IR_MODE)
+#endif /* not CONFIG_CPU_MONAHANS */
/*
* I2C registers
*/
+
#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */
#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */
#define ICR __REG(0x40301690) /* I2C Control Register - ICR */
#define ISR __REG(0x40301698) /* I2C Status Register - ISR */
#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */
-#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */
-#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */
-#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */
-#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */
-#define PWRISAR __REG(0x40f001A0) /* Power I2C Slave Address Register-ISAR */
-
-/* ----- Control register bits ---------------------------------------- */
-
-#define ICR_START 0x1 /* start bit */
-#define ICR_STOP 0x2 /* stop bit */
-#define ICR_ACKNAK 0x4 /* send ACK(0) or NAK(1) */
-#define ICR_TB 0x8 /* transfer byte bit */
-#define ICR_MA 0x10 /* master abort */
-#define ICR_SCLE 0x20 /* master clock enable */
-#define ICR_IUE 0x40 /* unit enable */
-#define ICR_GCD 0x80 /* general call disable */
-#define ICR_ITEIE 0x100 /* enable tx interrupts */
-#define ICR_IRFIE 0x200 /* enable rx interrupts */
-#define ICR_BEIE 0x400 /* enable bus error ints */
-#define ICR_SSDIE 0x800 /* slave STOP detected int enable */
-#define ICR_ALDIE 0x1000 /* enable arbitration interrupt */
-#define ICR_SADIE 0x2000 /* slave address detected int enable */
-#define ICR_UR 0x4000 /* unit reset */
-#define ICR_FM 0x8000 /* Fast Mode */
-
-/* ----- Status register bits ----------------------------------------- */
-
-#define ISR_RWM 0x1 /* read/write mode */
-#define ISR_ACKNAK 0x2 /* ack/nak status */
-#define ISR_UB 0x4 /* unit busy */
-#define ISR_IBB 0x8 /* bus busy */
-#define ISR_SSD 0x10 /* slave stop detected */
-#define ISR_ALD 0x20 /* arbitration loss detected */
-#define ISR_ITE 0x40 /* tx buffer empty */
-#define ISR_IRF 0x80 /* rx buffer full */
-#define ISR_GCAD 0x100 /* general call address detected */
-#define ISR_SAD 0x200 /* slave address detected */
-#define ISR_BED 0x400 /* bus error no ACK/NAK */
+#define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */
+#define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */
+#define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */
+#define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */
+#define PWRISAR __REG(0x40f001A0) /*Power I2C Slave Address Register-ISAR */
+
+#define ICR_START (1 << 0) /* start bit */
+#define ICR_STOP (1 << 1) /* stop bit */
+#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */
+#define ICR_TB (1 << 3) /* transfer byte bit */
+#define ICR_MA (1 << 4) /* master abort */
+#define ICR_SCLE (1 << 5) /* master clock enable */
+#define ICR_IUE (1 << 6) /* unit enable */
+#define ICR_GCD (1 << 7) /* general call disable */
+#define ICR_ITEIE (1 << 8) /* enable tx interrupts */
+#define ICR_IRFIE (1 << 9) /* enable rx interrupts */
+#define ICR_BEIE (1 << 10) /* enable bus error ints */
+#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */
+#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */
+#define ICR_SADIE (1 << 13) /* slave address detected int enable */
+#define ICR_UR (1 << 14) /* unit reset */
+
+#define ISR_RWM (1 << 0) /* read/write mode */
+#define ISR_ACKNAK (1 << 1) /* ack/nak status */
+#define ISR_UB (1 << 2) /* unit busy */
+#define ISR_IBB (1 << 3) /* bus busy */
+#define ISR_SSD (1 << 4) /* slave stop detected */
+#define ISR_ALD (1 << 5) /* arbitration loss detected */
+#define ISR_ITE (1 << 6) /* tx buffer empty */
+#define ISR_IRF (1 << 7) /* rx buffer full */
+#define ISR_GCAD (1 << 8) /* general call address detected */
+#define ISR_SAD (1 << 9) /* slave address detected */
+#define ISR_BED (1 << 10) /* bus error no ACK/NAK */
+
/*
* Serial Audio Controller
*/
-/* FIXME the audio defines collide w/ the SA1111 defines. I don't like these
- * short defines because there is too much chance of namespace collision
- */
-/*#define SACR0 __REG(0x40400000) / Global Control Register */
-/*#define SACR1 __REG(0x40400004) / Serial Audio I 2 S/MSB-Justified Control Register */
-/*#define SASR0 __REG(0x4040000C) / Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
-/*#define SAIMR __REG(0x40400014) / Serial Audio Interrupt Mask Register */
-/*#define SAICR __REG(0x40400018) / Serial Audio Interrupt Clear Register */
-/*#define SADIV __REG(0x40400060) / Audio Clock Divider Register. */
-/*#define SADR __REG(0x40400080) / Serial Audio Data Register (TX and RX FIFO access Register). */
+
+/* FIXME: This clash with SA1111 defines */
+#ifndef CONFIG_SA1111
+#define SACR0 __REG(0x40400000) /* Global Control Register */
+#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */
+#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+#define SAIMR __REG(0x40400014) /* Serial Audio Interrupt Mask Register */
+#define SAICR __REG(0x40400018) /* Serial Audio Interrupt Clear Register */
+#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */
+#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */
+#endif
/*
* AC97 Controller registers
*/
+
#define POCR __REG(0x40500000) /* PCM Out Control Register */
#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
@@ -561,9 +660,13 @@ typedef void (*ExcpHndlr) (void) ;
#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
+
/*
* USB Device Controller
+ * PXA25x and PXA27x USB device controller registers are different.
*/
+#if defined(CONFIG_PXA25x)
+
#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */
#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */
#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */
@@ -719,63 +822,250 @@ typedef void (*ExcpHndlr) (void) ;
#define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */
#define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */
-#if defined(CONFIG_PXA27X)
-/*
- * USB Host Controller
- */
-#define UHCREV __REG(0x4C000000)
-#define UHCHCON __REG(0x4C000004)
-#define UHCCOMS __REG(0x4C000008)
-#define UHCINTS __REG(0x4C00000C)
-#define UHCINTE __REG(0x4C000010)
-#define UHCINTD __REG(0x4C000014)
-#define UHCHCCA __REG(0x4C000018)
-#define UHCPCED __REG(0x4C00001C)
-#define UHCCHED __REG(0x4C000020)
-#define UHCCCED __REG(0x4C000024)
-#define UHCBHED __REG(0x4C000028)
-#define UHCBCED __REG(0x4C00002C)
-#define UHCDHEAD __REG(0x4C000030)
-#define UHCFMI __REG(0x4C000034)
-#define UHCFMR __REG(0x4C000038)
-#define UHCFMN __REG(0x4C00003C)
-#define UHCPERS __REG(0x4C000040)
-#define UHCLST __REG(0x4C000044)
-#define UHCRHDA __REG(0x4C000048)
-#define UHCRHDB __REG(0x4C00004C)
-#define UHCRHS __REG(0x4C000050)
-#define UHCRHPS1 __REG(0x4C000054)
-#define UHCRHPS2 __REG(0x4C000058)
-#define UHCRHPS3 __REG(0x4C00005C)
-#define UHCSTAT __REG(0x4C000060)
-#define UHCHR __REG(0x4C000064)
-#define UHCHIE __REG(0x4C000068)
-#define UHCHIT __REG(0x4C00006C)
-
-#define UHCHR_FSBIR (1<<0)
-#define UHCHR_FHR (1<<1)
-#define UHCHR_CGR (1<<2)
-#define UHCHR_SSDC (1<<3)
-#define UHCHR_UIT (1<<4)
-#define UHCHR_SSE (1<<5)
-#define UHCHR_PSPL (1<<6)
-#define UHCHR_PCPL (1<<7)
-#define UHCHR_SSEP0 (1<<9)
-#define UHCHR_SSEP1 (1<<10)
-#define UHCHR_SSEP2 (1<<11)
-
-#define UHCHIE_UPRIE (1<<13)
-#define UHCHIE_UPS2IE (1<<12)
-#define UHCHIE_UPS1IE (1<<11)
-#define UHCHIE_TAIE (1<<10)
-#define UHCHIE_HBAIE (1<<8)
-#define UHCHIE_RWIE (1<<7)
-
+#elif defined(CONFIG_PXA27X)||( CONFIG_CPU_MONAHANS)
+
+#define UDCCR __REG(0x40600000) /* UDC Control Register */
+#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */
+#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation
+ Protocol Port Support */
+#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol
+ Support */
+#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol
+ Enable */
+#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */
+#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */
+#define UDCCR_ACN_S 11
+#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */
+#define UDCCR_AIN_S 8
+#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface
+ Setting Number */
+#define UDCCR_AAISN_S 5
+#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active
+ Configuration */
+#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration
+ Error */
+#define UDCCR_UDR (1 << 2) /* UDC Resume */
+#define UDCCR_UDA (1 << 1) /* UDC Active */
+#define UDCCR_UDE (1 << 0) /* UDC Enable */
+
+#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */
+#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */
+#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */
+
+#define UDC_INT_FIFOERROR (0x2)
+#define UDC_INT_PACKETCMP (0x1)
+
+#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */
+#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */
+#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */
+#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */
+#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */
+
+#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
+#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */
+#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IRCC (1 << 31) /* IntEn - Configuration Change */
+#define UDCISR1_IRSOF (1 << 30) /* IntEn - Start of Frame */
+#define UDCISR1_IRRU (1 << 29) /* IntEn - Resume */
+#define UDCISR1_IRSU (1 << 28) /* IntEn - Suspend */
+#define UDCISR1_IRRS (1 << 27) /* IntEn - Reset */
+
+#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
+#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
+#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
+#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt
+ Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt
+ Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge
+ Interrupt Enable */
+#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising
+ Edge Interrupt Enable */
+#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling
+ Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge
+ Interrupt Enable */
+#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge
+ Interrupt Enable */
+#define UDCOTGISR __REG(0x4060001C) /* UDC OTG Interrupt Status Register*/
+#define UP2OCR __REG(0x40600020) /* Port 2 control register */
+#define UP3OCR __REG(0x40600024) /* Port 3 control register */
+
+#define UDCCSN(x) __REG2(0x40600100, (x) << 2)
+#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
+#define UDCCSR0_ACM (1 << 9) /* ACK control mode */
+#define UDCCSR0_AREN (1 << 8) /* ACK response enable */
+#define UDCCSR0_SA (1 << 7) /* Setup Active */
+#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
+#define UDCCSR0_FST (1 << 5) /* Force Stall */
+#define UDCCSR0_SST (1 << 4) /* Sent Stall */
+#define UDCCSR0_DME (1 << 3) /* DMA Enable */
+#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
+#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */
+#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */
+
+#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
+#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
+#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
+#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
+#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
+#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
+#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
+#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
+#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
+#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
+#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
+#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
+#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
+#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
+#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
+#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
+#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
+#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
+#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
+#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
+#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
+#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
+#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
+
+#define UDCCSR_DPE (1 << 9) /* Data Packet Error */
+#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
+#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */
+#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST (1 << 5) /* Force STALL */
+#define UDCCSR_SST (1 << 4) /* Sent STALL */
+#define UDCCSR_DME (1 << 3) /* DMA Enable */
+#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */
+#define UDCCSR_PC (1 << 1) /* Packet Complete */
+#define UDCCSR_FS (1 << 0) /* FIFO needs service */
+
+#define UDCBCN(x) __REG2(0x40600200, (x)<<2)
+#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */
+#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */
+#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */
+#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */
+#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */
+#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */
+#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */
+#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */
+#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */
+#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */
+#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */
+#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */
+#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */
+#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */
+#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */
+#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */
+#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */
+#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */
+#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */
+#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */
+#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */
+#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */
+#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */
+#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */
+
+#define UDCDN(x) __REG2(0x40600300, (x)<<2)
+#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2))
+#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
+#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */
+#define UDCDRA __REG(0x40600304) /* Data Register - EPA */
+#define UDCDRB __REG(0x40600308) /* Data Register - EPB */
+#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */
+#define UDCDRD __REG(0x40600310) /* Data Register - EPD */
+#define UDCDRE __REG(0x40600314) /* Data Register - EPE */
+#define UDCDRF __REG(0x40600318) /* Data Register - EPF */
+#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */
+#define UDCDRH __REG(0x40600320) /* Data Register - EPH */
+#define UDCDRI __REG(0x40600324) /* Data Register - EPI */
+#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */
+#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */
+#define UDCDRL __REG(0x40600330) /* Data Register - EPL */
+#define UDCDRM __REG(0x40600334) /* Data Register - EPM */
+#define UDCDRN __REG(0x40600338) /* Data Register - EPN */
+#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */
+#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */
+#define UDCDRR __REG(0x40600344) /* Data Register - EPR */
+#define UDCDRS __REG(0x40600348) /* Data Register - EPS */
+#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */
+#define UDCDRU __REG(0x40600350) /* Data Register - EPU */
+#define UDCDRV __REG(0x40600354) /* Data Register - EPV */
+#define UDCDRW __REG(0x40600358) /* Data Register - EPW */
+#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */
+
+#define UDCCN(x) __REG2(0x40600400, (x)<<2)
+#define UDCCRA __REG(0x40600404) /* Configuration register EPA */
+#define UDCCRB __REG(0x40600408) /* Configuration register EPB */
+#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */
+#define UDCCRD __REG(0x40600410) /* Configuration register EPD */
+#define UDCCRE __REG(0x40600414) /* Configuration register EPE */
+#define UDCCRF __REG(0x40600418) /* Configuration register EPF */
+#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */
+#define UDCCRH __REG(0x40600420) /* Configuration register EPH */
+#define UDCCRI __REG(0x40600424) /* Configuration register EPI */
+#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */
+#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */
+#define UDCCRL __REG(0x40600430) /* Configuration register EPL */
+#define UDCCRM __REG(0x40600434) /* Configuration register EPM */
+#define UDCCRN __REG(0x40600438) /* Configuration register EPN */
+#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */
+#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */
+#define UDCCRR __REG(0x40600444) /* Configuration register EPR */
+#define UDCCRS __REG(0x40600448) /* Configuration register EPS */
+#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */
+#define UDCCRU __REG(0x40600450) /* Configuration register EPU */
+#define UDCCRV __REG(0x40600454) /* Configuration register EPV */
+#define UDCCRW __REG(0x40600458) /* Configuration register EPW */
+#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */
+
+#define UDCCONR_CN (0x03 << 25) /* Configuration Number */
+#define UDCCONR_CN_S (25)
+#define UDCCONR_IN (0x07 << 22) /* Interface Number */
+#define UDCCONR_IN_S (22)
+#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */
+#define UDCCONR_AISN_S (19)
+#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */
+#define UDCCONR_EN_S (15)
+#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */
+#define UDCCONR_ET_S (13)
+#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */
+#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */
+#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */
+#define UDCCONR_ET_NU (0x00 << 13) /* Not used */
+#define UDCCONR_ED (1 << 12) /* Endpoint Direction */
+#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */
+#define UDCCONR_MPS_S (2)
+#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */
+#define UDCCONR_EE (1 << 0) /* Endpoint Enable */
+
+
+#define UDC_INT_FIFOERROR (0x2)
+#define UDC_INT_PACKETCMP (0x1)
+
+#define UDC_FNR_MASK (0x7ff)
+
+#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST)
+#define UDC_BCR_MASK (0x3ff)
#endif
/*
* Fast Infrared Communication Port
*/
+
+#define FICP __REG(0x40800000) /* Start of FICP area */
#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */
#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */
@@ -783,45 +1073,78 @@ typedef void (*ExcpHndlr) (void) ;
#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
+#define ICCR0_AME (1 << 7) /* Adress match enable */
+#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
+#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
+#define ICCR0_RXE (1 << 4) /* Receive enable */
+#define ICCR0_TXE (1 << 3) /* Transmit enable */
+#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */
+#define ICCR0_LBM (1 << 1) /* Loopback mode */
+#define ICCR0_ITR (1 << 0) /* IrDA transmission */
+
+#ifdef CONFIG_PXA27X
+#define ICCR2_RXP (1 << 3) /* Receive Pin Polarity select */
+#define ICCR2_TXP (1 << 2) /* Transmit Pin Polarity select */
+#define ICCR2_TRIG (3 << 0) /* Receive FIFO Trigger threshold */
+#define ICCR2_TRIG_8 (0 << 0) /* >= 8 bytes */
+#define ICCR2_TRIG_16 (1 << 0) /* >= 16 bytes */
+#define ICCR2_TRIG_32 (2 << 0) /* >= 32 bytes */
+#endif
+
+#ifdef CONFIG_PXA27X
+#define ICSR0_EOC (1 << 6) /* DMA End of Descriptor Chain */
+#endif
+#define ICSR0_FRE (1 << 5) /* Framing error */
+#define ICSR0_RFS (1 << 4) /* Receive FIFO service request */
+#define ICSR0_TFS (1 << 3) /* Transnit FIFO service request */
+#define ICSR0_RAB (1 << 2) /* Receiver abort */
+#define ICSR0_TUR (1 << 1) /* Trunsmit FIFO underun */
+#define ICSR0_EIF (1 << 0) /* End/Error in FIFO */
+
+#define ICSR1_ROR (1 << 6) /* Receiver FIFO underrun */
+#define ICSR1_CRE (1 << 5) /* CRC error */
+#define ICSR1_EOF (1 << 4) /* End of frame */
+#define ICSR1_TNF (1 << 3) /* Transmit FIFO not full */
+#define ICSR1_RNE (1 << 2) /* Receive FIFO not empty */
+#define ICSR1_TBY (1 << 1) /* Tramsmiter busy flag */
+#define ICSR1_RSY (1 << 0) /* Recevier synchronized flag */
+
+
/*
* Real Time Clock
*/
+
#define RCNR __REG(0x40900000) /* RTC Count Register */
#define RTAR __REG(0x40900004) /* RTC Alarm Register */
#define RTSR __REG(0x40900008) /* RTC Status Register */
#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
-#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */
-#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */
-#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */
-#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */
-#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */
-#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */
-#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
-#define RDCR __REG(0x40900010) /* RTC Day Count Register. */
-#define RYCR __REG(0x40900014) /* RTC Year Count Register. */
-#define SWCR __REG(0x40900028) /* Stopwatch Count Register */
-#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */
-
-#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */
-#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */
-#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */
+#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
+
+#define RTSR_PICE (1 << 15) /* Periodic interrupt count enable */
+#define RTSR_PIALE (1 << 14) /* Periodic interrupt Alarm enable */
#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
#define RTSR_AL (1 << 0) /* RTC alarm detected */
+
/*
* OS Timer & Match Registers
*/
+
#define OSMR0 __REG(0x40A00000) /* */
#define OSMR1 __REG(0x40A00004) /* */
#define OSMR2 __REG(0x40A00008) /* */
#define OSMR3 __REG(0x40A0000C) /* */
+#define OSMR4 __REG(0x40A00080) /* */
#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
+#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
+#define OMCR4 __REG(0x40A000C0) /* */
#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
+#define OSSR_M4 (1 << 4) /* Match status channel 4 */
#define OSSR_M3 (1 << 3) /* Match status channel 3 */
#define OSSR_M2 (1 << 2) /* Match status channel 2 */
#define OSSR_M1 (1 << 1) /* Match status channel 1 */
@@ -829,14 +1152,17 @@ typedef void (*ExcpHndlr) (void) ;
#define OWER_WME (1 << 0) /* Watchdog Match Enable */
+#define OIER_E4 (1 << 4) /* Interrupt enable channel 4 */
#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
+
/*
* Pulse Width Modulator
*/
+
#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */
#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */
#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */
@@ -845,19 +1171,25 @@ typedef void (*ExcpHndlr) (void) ;
#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */
#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */
+
/*
* Interrupt Controller
*/
+/* ICIP to ICPR can only be accessed by coprocessor */
+/* #ifndef CONFIG_CPU_MONAHANS*/
#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
+/* #endif // CONFIG_CPU_MONAHANS */
#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
+
/*
* General Purpose I/O
*/
+
#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
@@ -886,26 +1218,39 @@ typedef void (*ExcpHndlr) (void) ;
#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */
#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */
+#ifndef CONFIG_CPU_MONAHANS
#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */
#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */
#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */
#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */
#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */
-#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO 80 */
+#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO<95-80> */
+#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */
+#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */
+#endif
+
+#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */
+#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */
+#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */
+#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */
+#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */
+#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */
+#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */
/* More handy macros. The argument is a literal GPIO number. */
#define GPIO_bit(x) (1 << ((x) & 0x1f))
-#ifdef CONFIG_PXA27X
+#if defined (CONFIG_PXA27X) || (CONFIG_CPU_MONAHANS)
/* Interrupt Controller */
-
+/* #ifndef CONFIG_CPU_MONAHANS */
#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
+/* #endif //CONFIG_CPU_MONAHANS */
#define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
#define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
@@ -916,15 +1261,51 @@ typedef void (*ExcpHndlr) (void) ;
#define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
#define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
-#define GPLR(x) ((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3)
-#define GPDR(x) ((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3)
-#define GPSR(x) ((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3)
-#define GPCR(x) ((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3)
-#define GRER(x) ((((x) & 0x7f) < 96) ? _GRER(x) : GRER3)
-#define GFER(x) ((((x) & 0x7f) < 96) ? _GFER(x) : GFER3)
-#define GEDR(x) ((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3)
-#define GAFR(x) ((((x) & 0x7f) < 96) ? _GAFR(x) : \
- ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U))
+#define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
+#define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
+#define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
+#define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
+#define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
+#define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
+#define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
+#define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
+ ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
+
+#ifdef CONFIG_CPU_MONAHANS
+#define GSDR0 __REG(0x40E00400) /* Bit-wise Set of GPDR[31:0] */
+#define GSDR1 __REG(0x40E00404) /* Bit-wise Set of GPDR[63:32] */
+#define GSDR2 __REG(0x40E00408) /* Bit-wise Set of GPDR[95:64] */
+#define GSDR3 __REG(0x40E0040C) /* Bit-wise Set of GPDR[127:96] */
+
+#define GCDR0 __REG(0x40E00420) /* Bit-wise Clear of GPDR[31:0] */
+#define GCDR1 __REG(0x40E00424) /* Bit-wise Clear of GPDR[63:32] */
+#define GCDR2 __REG(0x40E00428) /* Bit-wise Clear of GPDR[95:64] */
+#define GCDR3 __REG(0x40E0042C) /* Bit-wise Clear of GPDR[127:96] */
+
+#define GSRER0 __REG(0x40E00440) /* Set Rising Edge Det. Enable [31:0] */
+#define GSRER1 __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */
+#define GSRER2 __REG(0x40E00448) /* Set Rising Edge Det. Enable [95:64] */
+#define GSRER3 __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */
+
+#define GCRER0 __REG(0x40E00460) /* Clear Rising Edge Det. Enable [31:0] */
+#define GCRER1 __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */
+#define GCRER2 __REG(0x40E00468) /* Clear Rising Edge Det. Enable [95:64] */
+#define GCRER3 __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */
+
+#define GSFER0 __REG(0x40E00480) /* Set Falling Edge Det. Enable [31:0] */
+#define GSFER1 __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */
+#define GSFER2 __REG(0x40E00488) /* Set Falling Edge Det. Enable [95:64] */
+#define GSFER3 __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */
+
+#define GCFER0 __REG(0x40E004A0) /* Clr Falling Edge Det. Enable [31:0] */
+#define GCFER1 __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */
+#define GCFER2 __REG(0x40E004A8) /* Clr Falling Edge Det. Enable [95:64] */
+#define GCFER3 __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */
+
+#define GSDR(x) __REG2(0x40E00400, ((x) & 0x60) >> 3)
+#define GCDR(x) __REG2(0x40300420, ((x) & 0x60) >> 3)
+#endif
+
#else
#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
@@ -938,11 +1319,13 @@ typedef void (*ExcpHndlr) (void) ;
#endif
+
/* GPIO alternate function assignments */
+#ifndef CONFIG_CPU_MONAHANS /* Monahans has its different definition */
#define GPIO1_RST 1 /* reset */
#define GPIO6_MMCCLK 6 /* MMC Clock */
-#define GPIO8_48MHz 7 /* 48 MHz clock output */
+#define GPIO7_48MHz 7 /* 48 MHz clock output */
#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */
#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */
#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */
@@ -966,6 +1349,7 @@ typedef void (*ExcpHndlr) (void) ;
#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */
#define GPIO31_SYNC 31 /* AC97/I2S sync */
#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */
+#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */
#define GPIO33_nCS_5 33 /* chip select 5 */
#define GPIO34_FFRXD 34 /* FFUART receive */
#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */
@@ -994,6 +1378,7 @@ typedef void (*ExcpHndlr) (void) ;
#define GPIO53_MMCCLK 53 /* MMC Clock */
#define GPIO54_MMCCLK 54 /* MMC Clock */
#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */
+#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27X) */
#define GPIO55_nPREG 55 /* Card Address bit 26 */
#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */
#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */
@@ -1028,6 +1413,15 @@ typedef void (*ExcpHndlr) (void) ;
#define GPIO78_nCS_2 78 /* chip select 2 */
#define GPIO79_nCS_3 79 /* chip select 3 */
#define GPIO80_nCS_4 80 /* chip select 4 */
+#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */
+#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */
+#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */
+#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */
+#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */
+#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */
+#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */
+#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */
+#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */
/* GPIO alternate function mode & direction */
@@ -1045,7 +1439,7 @@ typedef void (*ExcpHndlr) (void) ;
#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN)
#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT)
-#define GPIO8_48MHz_MD ( 8 | GPIO_ALT_FN_1_OUT)
+#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT)
#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT)
#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT)
#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT)
@@ -1066,13 +1460,14 @@ typedef void (*ExcpHndlr) (void) ;
#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN)
#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN)
#define GPIO28_BITCLK_I2S_MD (28 | GPIO_ALT_FN_2_IN)
-#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN)
+#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN)
#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN)
#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT)
-#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT)
+#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT)
#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT)
#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT)
#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN)
+#define GPIO32_MMCCLK_MD ( 32 | GPIO_ALT_FN_2_OUT)
#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT)
#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN)
#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT)
@@ -1088,6 +1483,7 @@ typedef void (*ExcpHndlr) (void) ;
#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT)
#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN)
#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT)
+#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT)
#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN)
#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN)
#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT)
@@ -1100,6 +1496,7 @@ typedef void (*ExcpHndlr) (void) ;
#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT)
#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT)
#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT)
+#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT)
#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT)
#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT)
#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN)
@@ -1134,14 +1531,99 @@ typedef void (*ExcpHndlr) (void) ;
#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT)
#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT)
#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT)
+#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT)
#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT)
+#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT)
+#define GPIO88_USBH1_PWR_MD (88 | GPIO_ALT_FN_1_IN)
+#define GPIO89_USBH1_PEN_MD (89 | GPIO_ALT_FN_2_OUT)
+#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT)
+#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT)
+#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT)
+#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT)
+#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT)
+#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_OUT)
+#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN)
-#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT)
-#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT)
-
+#endif
/*
* Power Manager
*/
+#ifdef CONFIG_CPU_MONAHANS
+
+#define ASCR __REG(0x40F40000) /* Application Subsystem Power Status/Control Register */
+#define ARSR __REG(0x40F40004) /* Application Subsystem Reset Status Register */
+#define AD3ER __REG(0x40F40008) /* Application Subsystem D3 state Wakeup Enable Register */
+#define AD3SR __REG(0x40F4000C) /* Application Subsystem D3 state Wakeup Status Register */
+#define AD2D0ER __REG(0x40F40010) /* Application Subsystem D2 to D0 state Wakeup Enable Register */
+#define AD2D0SR __REG(0x40F40014) /* Application Subsystem D2 to D0 state Wakeup Status Register */
+#define AD2D1ER __REG(0x40F40018) /* Application Subsystem D2 to D1 state Wakeup Enable Register */
+#define AD2D1SR __REG(0x40F4001C) /* Application Subsystem D2 to D1 state Wakeup Status Register */
+#define AD1D0ER __REG(0x40F40020) /* Application Subsystem D1 to D0 state Wakeup Enable Register */
+#define AD1D0SR __REG(0x40F40024) /* Application Subsystem D1 to D0 state Wakeup Status Register */
+#define ASDCNT __REG(0x40F40028) /* Application Subsystem SRAM Drowsy Count Register */
+#define AD3R __REG(0x40F40030) /* Application Subsystem D3 State Configuration Register */
+#define AD2R __REG(0x40F40034) /* Application Subsystem D2 State Configuration Register */
+#define AD1R __REG(0x40F40038) /* Application Subsystem D1 State Configuration Register */
+
+#define PMCR __REG(0x40F50000) /* Power Manager Control Register */
+#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */
+#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */
+#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */
+#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */
+#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */
+#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */
+#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */
+#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */
+#define PCMD(x) __REG(0x40F50110 + x*4)
+#define PCMD0 __REG(0x40F50110 + 0 * 4)
+#define PCMD1 __REG(0x40F50110 + 1 * 4)
+#define PCMD2 __REG(0x40F50110 + 2 * 4)
+#define PCMD3 __REG(0x40F50110 + 3 * 4)
+#define PCMD4 __REG(0x40F50110 + 4 * 4)
+#define PCMD5 __REG(0x40F50110 + 5 * 4)
+#define PCMD6 __REG(0x40F50110 + 6 * 4)
+#define PCMD7 __REG(0x40F50110 + 7 * 4)
+#define PCMD8 __REG(0x40F50110 + 8 * 4)
+#define PCMD9 __REG(0x40F50110 + 9 * 4)
+#define PCMD10 __REG(0x40F50110 + 10 * 4)
+#define PCMD11 __REG(0x40F50110 + 11 * 4)
+#define PCMD12 __REG(0x40F50110 + 12 * 4)
+#define PCMD13 __REG(0x40F50110 + 13 * 4)
+#define PCMD14 __REG(0x40F50110 + 14 * 4)
+#define PCMD15 __REG(0x40F50110 + 15 * 4)
+#define PCMD16 __REG(0x40F50110 + 16 * 4)
+#define PCMD17 __REG(0x40F50110 + 17 * 4)
+#define PCMD18 __REG(0x40F50110 + 18 * 4)
+#define PCMD19 __REG(0x40F50110 + 19 * 4)
+#define PCMD20 __REG(0x40F50110 + 20 * 4)
+#define PCMD21 __REG(0x40F50110 + 21 * 4)
+#define PCMD22 __REG(0x40F50110 + 22 * 4)
+#define PCMD23 __REG(0x40F50110 + 23 * 4)
+#define PCMD24 __REG(0x40F50110 + 24 * 4)
+#define PCMD25 __REG(0x40F50110 + 25 * 4)
+#define PCMD26 __REG(0x40F50110 + 26 * 4)
+#define PCMD27 __REG(0x40F50110 + 27 * 4)
+#define PCMD28 __REG(0x40F50110 + 28 * 4)
+#define PCMD29 __REG(0x40F50110 + 29 * 4)
+#define PCMD30 __REG(0x40F50110 + 30 * 4)
+#define PCMD31 __REG(0x40F50110 + 31 * 4)
+
+#define PCMD_MBC (1<<12)
+#define PCMD_DCE (1<<11)
+#define PCMD_LC (1<<10)
+#define PCMD_SQC (3<<8) /* only 00 and 01 are valid */
+
+#define PVCR_FVC (0x1 << 28)
+#define PVCR_VCSA (0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PVCR_ReadPointer (0x01f00000)
+#define PVCR_SlaveAddress (0x7f)
+
+#else
+
#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
@@ -1156,57 +1638,55 @@ typedef void (*ExcpHndlr) (void) ;
#define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */
#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */
-#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */
-#define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */
-#define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */
-#define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */
-#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */
-#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */
-#define PCMD(x) __REG(0x40F00080 + x*4)
-#define PCMD0 __REG(0x40F00080 + 0 * 4)
-#define PCMD1 __REG(0x40F00080 + 1 * 4)
-#define PCMD2 __REG(0x40F00080 + 2 * 4)
-#define PCMD3 __REG(0x40F00080 + 3 * 4)
-#define PCMD4 __REG(0x40F00080 + 4 * 4)
-#define PCMD5 __REG(0x40F00080 + 5 * 4)
-#define PCMD6 __REG(0x40F00080 + 6 * 4)
-#define PCMD7 __REG(0x40F00080 + 7 * 4)
-#define PCMD8 __REG(0x40F00080 + 8 * 4)
-#define PCMD9 __REG(0x40F00080 + 9 * 4)
-#define PCMD10 __REG(0x40F00080 + 10 * 4)
-#define PCMD11 __REG(0x40F00080 + 11 * 4)
-#define PCMD12 __REG(0x40F00080 + 12 * 4)
-#define PCMD13 __REG(0x40F00080 + 13 * 4)
-#define PCMD14 __REG(0x40F00080 + 14 * 4)
-#define PCMD15 __REG(0x40F00080 + 15 * 4)
-#define PCMD16 __REG(0x40F00080 + 16 * 4)
-#define PCMD17 __REG(0x40F00080 + 17 * 4)
-#define PCMD18 __REG(0x40F00080 + 18 * 4)
-#define PCMD19 __REG(0x40F00080 + 19 * 4)
-#define PCMD20 __REG(0x40F00080 + 20 * 4)
-#define PCMD21 __REG(0x40F00080 + 21 * 4)
-#define PCMD22 __REG(0x40F00080 + 22 * 4)
-#define PCMD23 __REG(0x40F00080 + 23 * 4)
-#define PCMD24 __REG(0x40F00080 + 24 * 4)
-#define PCMD25 __REG(0x40F00080 + 25 * 4)
-#define PCMD26 __REG(0x40F00080 + 26 * 4)
-#define PCMD27 __REG(0x40F00080 + 27 * 4)
-#define PCMD28 __REG(0x40F00080 + 28 * 4)
-#define PCMD29 __REG(0x40F00080 + 29 * 4)
-#define PCMD30 __REG(0x40F00080 + 30 * 4)
-#define PCMD31 __REG(0x40F00080 + 31 * 4)
-
-#define PCMD_MBC (1<<12)
-#define PCMD_DCE (1<<11)
-#define PCMD_LC (1<<10)
+#define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */
+#define PSTR __REG(0x40F00038) /*Power Manager Standby Config Register */
+#define PSNR __REG(0x40F0003C) /*Power Manager Sense Config Register */
+#define PVCR __REG(0x40F00040) /*Power Manager VoltageControl Register */
+#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */
+#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */
+#define PCMD(x) __REG2(0x40F00080, (x)<<2)
+#define PCMD0 __REG(0x40F00080 + 0 * 4)
+#define PCMD1 __REG(0x40F00080 + 1 * 4)
+#define PCMD2 __REG(0x40F00080 + 2 * 4)
+#define PCMD3 __REG(0x40F00080 + 3 * 4)
+#define PCMD4 __REG(0x40F00080 + 4 * 4)
+#define PCMD5 __REG(0x40F00080 + 5 * 4)
+#define PCMD6 __REG(0x40F00080 + 6 * 4)
+#define PCMD7 __REG(0x40F00080 + 7 * 4)
+#define PCMD8 __REG(0x40F00080 + 8 * 4)
+#define PCMD9 __REG(0x40F00080 + 9 * 4)
+#define PCMD10 __REG(0x40F00080 + 10 * 4)
+#define PCMD11 __REG(0x40F00080 + 11 * 4)
+#define PCMD12 __REG(0x40F00080 + 12 * 4)
+#define PCMD13 __REG(0x40F00080 + 13 * 4)
+#define PCMD14 __REG(0x40F00080 + 14 * 4)
+#define PCMD15 __REG(0x40F00080 + 15 * 4)
+#define PCMD16 __REG(0x40F00080 + 16 * 4)
+#define PCMD17 __REG(0x40F00080 + 17 * 4)
+#define PCMD18 __REG(0x40F00080 + 18 * 4)
+#define PCMD19 __REG(0x40F00080 + 19 * 4)
+#define PCMD20 __REG(0x40F00080 + 20 * 4)
+#define PCMD21 __REG(0x40F00080 + 21 * 4)
+#define PCMD22 __REG(0x40F00080 + 22 * 4)
+#define PCMD23 __REG(0x40F00080 + 23 * 4)
+#define PCMD24 __REG(0x40F00080 + 24 * 4)
+#define PCMD25 __REG(0x40F00080 + 25 * 4)
+#define PCMD26 __REG(0x40F00080 + 26 * 4)
+#define PCMD27 __REG(0x40F00080 + 27 * 4)
+#define PCMD28 __REG(0x40F00080 + 28 * 4)
+#define PCMD29 __REG(0x40F00080 + 29 * 4)
+#define PCMD30 __REG(0x40F00080 + 30 * 4)
+#define PCMD31 __REG(0x40F00080 + 31 * 4)
+
+#define PCMD_MBC (1<<12)
+#define PCMD_DCE (1<<11)
+#define PCMD_LC (1<<10)
/* FIXME: PCMD_SQC need be checked. */
-#define PCMD_SQC (3<<8) /* currently only bit 8 is changerable, */
- /* bit 9 should be 0 all day. */
-#define PVCR_VCSA (0x1<<14)
-#define PVCR_CommandDelay (0xf80)
-/* define MACRO for Power Manager General Configuration Register (PCFR) */
-#define PCFR_FVC (0x1 << 10)
-#define PCFR_PI2C_EN (0x1 << 6)
+#define PCMD_SQC (3<<8) /* currently only bit 8 is changeable,
+ bit 9 should be 0 all day. */
+#define PVCR_VCSA (0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PCFR_PI2C_EN (0x1 << 6)
#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */
#define PSSR_RDH (1 << 5) /* Read Disable Hold */
@@ -1215,6 +1695,13 @@ typedef void (*ExcpHndlr) (void) ;
#define PSSR_BFS (1 << 1) /* Battery Fault Status */
#define PSSR_SSS (1 << 0) /* Software Sleep Status */
+#define PCFR_RO (1 << 15) /* RDH Override */
+#define PCFR_PO (1 << 14) /* PH Override */
+#define PCFR_GPROD (1 << 12) /* GPIO nRESET_OUT Disable */
+#define PCFR_L1_EN (1 << 11) /* Sleep Mode L1 converter Enable */
+#define PCFR_FVC (1 << 10) /* Frequency/Voltage Change */
+#define PCFR_DC_EN (1 << 7) /* Sleep/deep-sleep DC-DC Converter Enable */
+#define PCFR_PI2CEN (1 << 6) /* Enable PI2C controller */
#define PCFR_DS (1 << 3) /* Deep Sleep Mode */
#define PCFR_FS (1 << 2) /* Float Static Chip Selects */
#define PCFR_FP (1 << 1) /* Float PCMCIA controls */
@@ -1224,19 +1711,52 @@ typedef void (*ExcpHndlr) (void) ;
#define RCSR_SMR (1 << 2) /* Sleep Mode */
#define RCSR_WDR (1 << 1) /* Watchdog Reset */
#define RCSR_HWR (1 << 0) /* Hardware Reset */
+#endif /* CONFIG_CPU_MONAHANS */
/*
* SSP Serial Port Registers
*/
+
#define SSCR0 __REG(0x41000000) /* SSP Control Register 0 */
#define SSCR1 __REG(0x41000004) /* SSP Control Register 1 */
#define SSSR __REG(0x41000008) /* SSP Status Register */
#define SSITR __REG(0x4100000C) /* SSP Interrupt Test Register */
#define SSDR __REG(0x41000010) /* (Write / Read) SSP Data Write Register/SSP Data Read Register */
+#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */
+#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */
+#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */
+#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */
+#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */
+#define SSCR0_National (0x2 << 4) /* National Microwire */
+#define SSCR0_ECS (1 << 6) /* External clock select */
+#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */
+#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
+
+#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */
+#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */
+#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */
+#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */
+#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */
+#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */
+#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+
+#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */
+#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */
+#define SSSR_BSY (1 << 4) /* SSP Busy */
+#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */
+#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */
+#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */
+
+
/*
* MultiMediaCard (MMC) controller
*/
+
#define MMC_STRPCL __REG(0x41100000) /* Control to start and stop MMC clock */
#define MMC_STAT __REG(0x41100004) /* MMC Status Register (read only) */
#define MMC_CLKRT __REG(0x41100008) /* MMC clock rate */
@@ -1257,18 +1777,101 @@ typedef void (*ExcpHndlr) (void) ;
#define MMC_TXFIFO __REG(0x41100044) /* Transmit FIFO (write only) */
/*
+ * MultiMediaCard (MMC2) controller
+ */
+
+#define MMC2_STRPCL __REG_2(0x42000000) /* Control to start and stop MMC clock */
+#define MMC2_STAT __REG_2(0x42000004) /* MMC Status Register (read only) */
+#define MMC2_CLKRT __REG_2(0x42000008) /* MMC clock rate */
+#define MMC2_SPI __REG_2(0x4200000c) /* SPI mode control bits */
+#define MMC2_CMDAT __REG_2(0x42000010) /* Command/response/data sequence control */
+#define MMC2_RESTO __REG_2(0x42000014) /* Expected response time out */
+#define MMC2_RDTO __REG_2(0x42000018) /* Expected data read time out */
+#define MMC2_BLKLEN __REG_2(0x4200001c) /* Block length of data transaction */
+#define MMC2_NOB __REG_2(0x42000020) /* Number of blocks, for block mode */
+#define MMC2_PRTBUF __REG_2(0x42000024) /* Partial MMC_TXFIFO FIFO written */
+#define MMC2_I_MASK __REG_2(0x42000028) /* Interrupt Mask */
+#define MMC2_I_REG __REG_2(0x4200002c) /* Interrupt Register (read only) */
+#define MMC2_CMD __REG_2(0x42000030) /* Index of current command */
+#define MMC2_ARGH __REG_2(0x42000034) /* MSW part of the current command argument */
+#define MMC2_ARGL __REG_2(0x42000038) /* LSW part of the current command argument */
+#define MMC2_RES __REG_2(0x4200003c) /* Response FIFO (read only) */
+#define MMC2_RXFIFO __REG_2(0x42000040) /* Receive FIFO (read only) */
+#define MMC2_TXFIFO __REG_2(0x42000044) /* Transmit FIFO (write only) */
+
+/*
* Core Clock
*/
+#if defined(CONFIG_CPU_MONAHANS)
+#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */
+#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */
+#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */
+#define CKENA __REG(0x4134000C) /* A Clock Enable Register */
+#define CKENB __REG(0x41340010) /* B Clock Enable Register */
+#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */
+
+#define ACCR_SMC_MASK 0x03800000 /* Static Memory Controller Frequency Select */
+#define ACCR_SRAM_MASK 0x000c0000 /* SRAM Controller Frequency Select */
+#define ACCR_FC_MASK 0x00030000 /* Frequency Change Frequency Select */
+#define ACCR_HSIO_MASK 0x0000c000 /* High Speed IO Frequency Select */
+#define ACCR_DDR_MASK 0x00003000 /* DDR Memory Controller Frequency Select */
+#define ACCR_XN_MASK 0x00000700 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define ACCR_XL_MASK 0x0000001f /* Crystal Frequency to Memory Frequency Multiplier */
+#define ACCR_XPDIS (1 << 31)
+#define ACCR_SPDIS (1 << 30)
+#define ACCR_13MEND1 (1 << 27)
+#define ACCR_D0CS (1 << 26)
+#define ACCR_13MEND2 (1 << 21)
+#define ACCR_PCCE (1 << 11)
+
+#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */
+#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */
+#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */
+#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */
+#define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */
+#define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */
+#define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */
+#define CKENA_23_STUART (1 << 23) /* STUART Unit Clock Enable */
+#define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */
+#define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */
+#define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */
+#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */
+#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */
+#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */
+#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */
+#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */
+#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */
+#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */
+#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */
+#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */
+#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */
+#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */
+#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */
+#define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */
+#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */
+#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */
+#define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */
+#define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */
+
+#define CKENB_8_1WIRE ((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */
+#define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */
+#define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */
+#define CKENB_4_I2C ((1 << 4) + 32) /* I2C Unit Clock Enable */
+#define CKENB_1_PWM1 ((1 << 1) + 32) /* PWM2 & PWM3 Clock Enable */
+#define CKENB_0_PWM0 ((1 << 0) + 32) /* PWM0 & PWM1 Clock Enable */
+
+#else /* if defined CONFIG_CPU_MONAHANS */
+
#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
#define CKEN __REG(0x41300004) /* Clock Enable Register */
#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
+#define CCSR __REG(0x4130000C) /* Core Clock Status Register */
#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#if !defined(CONFIG_PXA27X)
#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
-#endif
#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
+#define CKEN31_AC97 (1 << 31)
#define CKEN24_CAMERA (1 << 24) /* Camera Interface Clock Enable */
#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */
#define CKEN22_MEMC (1 << 22) /* Memory Controller Clock Enable */
@@ -1283,15 +1886,15 @@ typedef void (*ExcpHndlr) (void) ;
#define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */
#define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */
#define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */
-#if defined(CONFIG_PXA27X)
#define CKEN10_USBHOST (1 << 10) /* USB Host Unit Clock Enable */
-#define CKEN24_CAMERA (1 << 24) /* Camera Unit Clock Enable */
-#endif
+#define CKEN9_OSTIMER (1 << 9) /* OS Timer Unit Clock Enable */
#define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */
#define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */
#define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */
#define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */
+#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */
#define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */
+#define CKEN3_SSP2 (1 << 3) /* SSP2 Unit Clock Enable */
#define CKEN2_AC97 (1 << 2) /* AC97 Unit Clock Enable */
#define CKEN1_PWM1 (1 << 1) /* PWM1 Clock Enable */
#define CKEN0_PWM0 (1 << 0) /* PWM0 Clock Enable */
@@ -1300,39 +1903,54 @@ typedef void (*ExcpHndlr) (void) ;
#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
#if !defined(CONFIG_PXA27X)
-#define CCCR_L09 (0x1F)
-#define CCCR_L27 (0x1)
-#define CCCR_L32 (0x2)
-#define CCCR_L36 (0x3)
-#define CCCR_L40 (0x4)
-#define CCCR_L45 (0x5)
-
-#define CCCR_M1 (0x1 << 5)
-#define CCCR_M2 (0x2 << 5)
-#define CCCR_M4 (0x3 << 5)
-
-#define CCCR_N10 (0x2 << 7)
-#define CCCR_N15 (0x3 << 7)
-#define CCCR_N20 (0x4 << 7)
-#define CCCR_N25 (0x5 << 7)
-#define CCCR_N30 (0x6 << 7)
+#define CCCR_L09 (0x1F)
+#define CCCR_L27 (0x1)
+#define CCCR_L32 (0x2)
+#define CCCR_L36 (0x3)
+#define CCCR_L40 (0x4)
+#define CCCR_L45 (0x5)
+
+#define CCCR_M1 (0x1 << 5)
+#define CCCR_M2 (0x2 << 5)
+#define CCCR_M4 (0x3 << 5)
+
+#define CCCR_N10 (0x2 << 7)
+#define CCCR_N15 (0x3 << 7)
+#define CCCR_N20 (0x4 << 7)
+#define CCCR_N25 (0x5 << 7)
+#define CCCR_N30 (0x6 << 7)
#endif
+#endif /* CONFIG_CPU_MONAHANS */
+
/*
* LCD
*/
+#ifndef CONFIG_CPU_MONAHANS
+
#define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */
#define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */
#define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */
#define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */
#define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */
#define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */
+#define LCSR __REG(0x44000038) /* LCD Controller Status Register */
#define LCSR0 __REG(0x44000038) /* LCD Controller Status Register */
#define LCSR1 __REG(0x44000034) /* LCD Controller Status Register */
#define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */
#define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */
#define TMEDCR __REG(0x44000044) /* TMED Control Register */
+#define LCCR3_1BPP (0 << 24)
+#define LCCR3_2BPP (1 << 24)
+#define LCCR3_4BPP (2 << 24)
+#define LCCR3_8BPP (3 << 24)
+#define LCCR3_16BPP (4 << 24)
+#define LCCR3_18BPP (6 << 24) /* packed pixel format */
+#define LCCR3_19BPP (8 << 24) /* packed pixel format */
+#define LCCR3_24BPP (9 << 24)
+#define LCCR3_25BPP (10<< 24)
+
#define FDADR0 __REG(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */
#define FSADR0 __REG(0x44000204) /* DMA Channel 0 Frame Source Address Register */
#define FIDR0 __REG(0x44000208) /* DMA Channel 0 Frame ID Register */
@@ -1342,71 +1960,116 @@ typedef void (*ExcpHndlr) (void) ;
#define FIDR1 __REG(0x44000218) /* DMA Channel 1 Frame ID Register */
#define LDCMD1 __REG(0x4400021C) /* DMA Channel 1 Command Register */
+#else
+
+#define LCCR0 __REG_2(0x44000000) /* LCD Controller Control Register 0 */
+#define LCCR1 __REG_2(0x44000004) /* LCD Controller Control Register 1 */
+#define LCCR2 __REG_2(0x44000008) /* LCD Controller Control Register 2 */
+#define LCCR3 __REG_2(0x4400000C) /* LCD Controller Control Register 3 */
+#define DFBR0 __REG_2(0x44000020) /* DMA Channel 0 Frame Branch Register */
+#define DFBR1 __REG_2(0x44000024) /* DMA Channel 1 Frame Branch Register */
+#define LCSR __REG_2(0x44000038) /* LCD Controller Status Register */
+#define LCSR1 __REG_2(0x44000034) /* LCD Controller Status Register */
+#define LIIDR __REG_2(0x4400003C) /* LCD Controller Interrupt ID Register */
+#define TMEDRGBR __REG_2(0x44000040) /* TMED RGB Seed Register */
+#define TMEDCR __REG_2(0x44000044) /* TMED Control Register */
+
+#define LCCR3_1BPP (0 << 24)
+#define LCCR3_2BPP (1 << 24)
+#define LCCR3_4BPP (2 << 24)
+#define LCCR3_8BPP (3 << 24)
+#define LCCR3_16BPP (4 << 24)
+#define LCCR3_18BPP (6 << 24) /* packed pixel format */
+#define LCCR3_19BPP (8 << 24) /* packed pixel format */
+#define LCCR3_24BPP (9 << 24)
+#define LCCR3_25BPP (10<< 24)
+
+#define FDADR0 __REG_2(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */
+#define FSADR0 __REG_2(0x44000204) /* DMA Channel 0 Frame Source Address Register */
+#define FIDR0 __REG_2(0x44000208) /* DMA Channel 0 Frame ID Register */
+#define LDCMD0 __REG_2(0x4400020C) /* DMA Channel 0 Command Register */
+#define FDADR1 __REG_2(0x44000210) /* DMA Channel 1 Frame Descriptor Address Register */
+#define FSADR1 __REG_2(0x44000214) /* DMA Channel 1 Frame Source Address Register */
+#define FIDR1 __REG_2(0x44000218) /* DMA Channel 1 Frame ID Register */
+#define LDCMD1 __REG_2(0x4400021C) /* DMA Channel 1 Command Register */
+
+#endif
+
#define LCCR0_ENB (1 << 0) /* LCD Controller enable */
-#define LCCR0_CMS (1 << 1) /* Color = 0, Monochrome = 1 */
-#define LCCR0_SDS (1 << 2) /* Single Panel = 0, Dual Panel = 1 */
+#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */
+#define LCCR0_Color (LCCR0_CMS*0) /* Color display */
+#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */
+#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display */
+ /* Select */
+#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */
+#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */
+
#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */
#define LCCR0_SFM (1 << 4) /* Start of frame mask */
#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */
#define LCCR0_EFM (1 << 6) /* End of Frame mask */
-#define LCCR0_PAS (1 << 7) /* Passive = 0, Active = 1 */
-#define LCCR0_BLE (1 << 8) /* Little Endian = 0, Big Endian = 1 */
-#define LCCR0_DPD (1 << 9) /* Double Pixel mode, 4 pixel value = 0, 8 pixle values = 1 */
+#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */
+#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */
+#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */
+#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome */
+ /* display mode) */
+#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */
+ /* display */
+#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */
+ /* display */
#define LCCR0_DIS (1 << 10) /* LCD Disable */
#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */
#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */
#define LCCR0_PDD_S 12
-#define LCCR0_BM (1 << 20) /* Branch mask */
+#define LCCR0_BM (1 << 20) /* Branch mask */
#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
-#if defined(CONFIG_PXA27X)
-#define LCCR0_LCDT (1 << 22) /* LCD Panel Type */
-#define LCCR0_RDSTM (1 << 23) /* Read Status Interrupt Mask */
-#define LCCR0_CMDIM (1 << 24) /* Command Interrupt Mask */
-#endif
-
-#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */
-#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \
- (((Pixel) - 1) << FShft (LCCR1_PPL))
-
-#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */
-#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \
- /* pulse Width [1..64 Tpix] */ \
- (((Tpix) - 1) << FShft (LCCR1_HSW))
-
-#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */
- /* count - 1 [Tpix] */
-#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \
- /* [1..256 Tpix] */ \
- (((Tpix) - 1) << FShft (LCCR1_ELW))
-
-#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */
- /* Wait count - 1 [Tpix] */
-#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \
- /* [1..256 Tpix] */ \
- (((Tpix) - 1) << FShft (LCCR1_BLW))
-
-
-#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */
-#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \
- (((Line) - 1) << FShft (LCCR2_LPP))
-
-#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */
- /* Width - 1 [Tln] (L_FCLK) */
-#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \
- /* Width [1..64 Tln] */ \
- (((Tln) - 1) << FShft (LCCR2_VSW))
-
-#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */
- /* count [Tln] */
-#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \
- /* [0..255 Tln] */ \
- ((Tln) << FShft (LCCR2_EFW))
-
-#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */
- /* Wait count [Tln] */
-#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \
- /* [0..255 Tln] */ \
- ((Tln) << FShft (LCCR2_BFW))
+#define LCCR0_LCDT (1 << 22) /* LCD Panel Type */
+#define LCCR0_RDSTM (1 << 23) /* Read Status Interrupt Mask */
+#define LCCR0_CMDIM (1 << 24) /* Command Interrupt Mask */
+
+#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */
+#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \
+ (((Pixel) - 1) << FShft (LCCR1_PPL))
+
+#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */
+#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \
+ /* pulse Width [1..64 Tpix] */ \
+ (((Tpix) - 1) << FShft (LCCR1_HSW))
+
+#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */
+ /* count - 1 [Tpix] */
+#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \
+ /* [1..256 Tpix] */ \
+ (((Tpix) - 1) << FShft (LCCR1_ELW))
+
+#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */
+ /* Wait count - 1 [Tpix] */
+#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \
+ /* [1..256 Tpix] */ \
+ (((Tpix) - 1) << FShft (LCCR1_BLW))
+
+
+#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */
+#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \
+ (((Line) - 1) << FShft (LCCR2_LPP))
+
+#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */
+ /* Width - 1 [Tln] (L_FCLK) */
+#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \
+ /* Width [1..64 Tln] */ \
+ (((Tln) - 1) << FShft (LCCR2_VSW))
+
+#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */
+ /* count [Tln] */
+#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \
+ /* [0..255 Tln] */ \
+ ((Tln) << FShft (LCCR2_EFW))
+
+#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */
+ /* Wait count [Tln] */
+#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \
+ /* [0..255 Tln] */ \
+ ((Tln) << FShft (LCCR2_BFW))
#if 0
#define LCCR3_PCD (0xff) /* Pixel clock divisor */
@@ -1418,54 +2081,73 @@ typedef void (*ExcpHndlr) (void) ;
#define LCCR3_API_S 16
#define LCCR3_VSP (1 << 20) /* vertical sync polarity */
#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */
-#define LCCR3_PCP (1 << 22) /* pixel clock polarity */
-#define LCCR3_OEP (1 << 23) /* output enable polarity */
+#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */
+#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */
+#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */
+
+#define LCCR3_OEP (1 << 23) /* Output Enable Polarity (L_BIAS, */
+ /* active display mode) */
+#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */
+#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */
+
#if 0
#define LCCR3_BPP (7 << 24) /* bits per pixel */
#define LCCR3_BPP_S 24
#endif
#define LCCR3_DPC (1 << 27) /* double pixel clock mode */
-#define LCCR3_PDFOR_0 (0 << 30)
-#define LCCR3_PDFOR_1 (1 << 30)
-#define LCCR3_PDFOR_2 (2 << 30)
-#define LCCR3_PDFOR_3 (3 << 30)
+#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */
+#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \
+ (((Div) << FShft (LCCR3_PCD)))
+
+
+#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */
+#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \
+ (((Bpp) << FShft (LCCR3_BPP)))
-#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */
-#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \
- (((Div) << FShft (LCCR3_PCD)))
+#define LCCR3_ACB Fld (8, 8) /* AC Bias */
+#define LCCR3_Acb(Acb) /* BAC Bias */ \
+ (((Acb) << FShft (LCCR3_ACB)))
+#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */
+ /* pulse active High */
+#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */
-#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */
-#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \
- ((((Bpp&0x7) << FShft (LCCR3_BPP)))|(((Bpp&0x8)<<26)))
+#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */
+ /* active High */
+#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */
+ /* active Low */
-#define LCCR3_ACB Fld (8, 8) /* AC Bias */
-#define LCCR3_Acb(Acb) /* BAC Bias */ \
- (((Acb) << FShft (LCCR3_ACB)))
+#define LCSR_LDD (1 << 0) /* LCD Disable Done */
+#define LCSR_SOF (1 << 1) /* Start of frame */
+#define LCSR_BER (1 << 2) /* Bus error */
+#define LCSR_ABC (1 << 3) /* AC Bias count */
+#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */
+#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */
+#define LCSR_OU (1 << 6) /* output FIFO underrun */
+#define LCSR_QD (1 << 7) /* quick disable */
+#define LCSR_EOF (1 << 8) /* end of frame */
+#define LCSR_BS (1 << 9) /* branch status */
+#define LCSR_SINT (1 << 10) /* subsequent interrupt */
-#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */
- /* pulse active High */
-#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */
+#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
-#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */
- /* active High */
-#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */
- /* active Low */
+#define LCSR_LDD (1 << 0) /* LCD Disable Done */
+#define LCSR_SOF (1 << 1) /* Start of frame */
+#define LCSR_BER (1 << 2) /* Bus error */
+#define LCSR_ABC (1 << 3) /* AC Bias count */
+#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */
+#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */
+#define LCSR_OU (1 << 6) /* output FIFO underrun */
+#define LCSR_QD (1 << 7) /* quick disable */
+#define LCSR_EOF (1 << 8) /* end of frame */
+#define LCSR_BS (1 << 9) /* branch status */
+#define LCSR_SINT (1 << 10) /* subsequent interrupt */
-#define LCSR0_LDD (1 << 0) /* LCD Disable Done */
-#define LCSR0_SOF (1 << 1) /* Start of frame */
-#define LCSR0_BER (1 << 2) /* Bus error */
-#define LCSR0_ABC (1 << 3) /* AC Bias count */
-#define LCSR0_IUL (1 << 4) /* input FIFO underrun Lower panel */
-#define LCSR0_IUU (1 << 5) /* input FIFO underrun Upper panel */
-#define LCSR0_OU (1 << 6) /* output FIFO underrun */
-#define LCSR0_QD (1 << 7) /* quick disable */
-#define LCSR0_EOF0 (1 << 8) /* end of frame */
-#define LCSR0_BS (1 << 9) /* branch status */
-#define LCSR0_SINT (1 << 10) /* subsequent interrupt */
+#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
+/* Overlay1 & Overlay2 & Hardware Cursor */
#define LCSR1_SOF1 (1 << 0)
#define LCSR1_SOF2 (1 << 1)
#define LCSR1_SOF3 (1 << 2)
@@ -1493,41 +2175,219 @@ typedef void (*ExcpHndlr) (void) ;
#define LCSR1_IU5 (1 << 28)
#define LCSR1_IU6 (1 << 29)
-#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
-#if defined(CONFIG_PXA27X)
#define LDCMD_SOFINT (1 << 22)
#define LDCMD_EOFINT (1 << 21)
+
+#define LCCR0_LDDALT (1<<26) /* LDD Alternate mapping bit when base pixel is RGBT16 */
+#define LCCR0_OUC (1<<25) /* Overlay Underlay Control Bit */
+
+#define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */
+#define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */
+#define LCCR5_SOFM3 (1<<2) /* Start Of Frame Mask for Overlay 2 (channel 3) */
+#define LCCR5_SOFM4 (1<<3) /* Start Of Frame Mask for Overlay 2 (channel 4) */
+#define LCCR5_SOFM5 (1<<4) /* Start Of Frame Mask for cursor (channel 5) */
+#define LCCR5_SOFM6 (1<<5) /* Start Of Frame Mask for command data (channel 6) */
+
+#define LCCR5_EOFM1 (1<<8) /* End Of Frame Mask for Overlay 1 (channel 1) */
+#define LCCR5_EOFM2 (1<<9) /* End Of Frame Mask for Overlay 2 (channel 2) */
+#define LCCR5_EOFM3 (1<<10) /* End Of Frame Mask for Overlay 2 (channel 3) */
+#define LCCR5_EOFM4 (1<<11) /* End Of Frame Mask for Overlay 2 (channel 4) */
+#define LCCR5_EOFM5 (1<<12) /* End Of Frame Mask for cursor (channel 5) */
+#define LCCR5_EOFM6 (1<<13) /* End Of Frame Mask for command data (channel 6) */
+
+#define LCCR5_BSM1 (1<<16) /* Branch mask for Overlay 1 (channel 1) */
+#define LCCR5_BSM2 (1<<17) /* Branch mask for Overlay 2 (channel 2) */
+#define LCCR5_BSM3 (1<<18) /* Branch mask for Overlay 2 (channel 3) */
+#define LCCR5_BSM4 (1<<19) /* Branch mask for Overlay 2 (channel 4) */
+#define LCCR5_BSM5 (1<<20) /* Branch mask for cursor (channel 5) */
+#define LCCR5_BSM6 (1<<21) /* Branch mask for data command (channel 6) */
+
+#define LCCR5_IUM1 (1<<24) /* Input FIFO Underrun Mask for Overlay 1 */
+#define LCCR5_IUM2 (1<<25) /* Input FIFO Underrun Mask for Overlay 2 */
+#define LCCR5_IUM3 (1<<26) /* Input FIFO Underrun Mask for Overlay 2 */
+#define LCCR5_IUM4 (1<<27) /* Input FIFO Underrun Mask for Overlay 2 */
+#define LCCR5_IUM5 (1<<28) /* Input FIFO Underrun Mask for cursor */
+#define LCCR5_IUM6 (1<<29) /* Input FIFO Underrun Mask for data command */
+
+#define OVL1C1_O1EN (1<<31) /* Enable bit for Overlay 1 */
+#define OVL2C1_O2EN (1<<31) /* Enable bit for Overlay 2 */
+#define CCR_CEN (1<<31) /* Enable bit for Cursor */
+
+/* LCD registers */
+#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 4 */
+#define LCCR5 __REG(0x44000014) /* LCD Controller Control Register 5 */
+#define FBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */
+#define FBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */
+#define FBR2 __REG(0x44000028) /* DMA Channel 2 Frame Branch Register */
+#define FBR3 __REG(0x4400002C) /* DMA Channel 3 Frame Branch Register */
+#define FBR4 __REG(0x44000030) /* DMA Channel 4 Frame Branch Register */
+#define FDADR2 __REG(0x44000220) /* DMA Channel 2 Frame Descriptor Address Register */
+#define FSADR2 __REG(0x44000224) /* DMA Channel 2 Frame Source Address Register */
+#define FIDR2 __REG(0x44000228) /* DMA Channel 2 Frame ID Register */
+#define LDCMD2 __REG(0x4400022C) /* DMA Channel 2 Command Register */
+#define FDADR3 __REG(0x44000230) /* DMA Channel 3 Frame Descriptor Address Register */
+#define FSADR3 __REG(0x44000234) /* DMA Channel 3 Frame Source Address Register */
+#define FIDR3 __REG(0x44000238) /* DMA Channel 3 Frame ID Register */
+#define LDCMD3 __REG(0x4400023C) /* DMA Channel 3 Command Register */
+#define FDADR4 __REG(0x44000240) /* DMA Channel 4 Frame Descriptor Address Register */
+#define FSADR4 __REG(0x44000244) /* DMA Channel 4 Frame Source Address Register */
+#define FIDR4 __REG(0x44000248) /* DMA Channel 4 Frame ID Register */
+#define LDCMD4 __REG(0x4400024C) /* DMA Channel 4 Command Register */
+#define FDADR5 __REG(0x44000250) /* DMA Channel 5 Frame Descriptor Address Register */
+#define FSADR5 __REG(0x44000254) /* DMA Channel 5 Frame Source Address Register */
+#define FIDR5 __REG(0x44000258) /* DMA Channel 5 Frame ID Register */
+#define LDCMD5 __REG(0x4400025C) /* DMA Channel 5 Command Register */
+
+#define OVL1C1 __REG(0x44000050) /* Overlay 1 Control Register 1 */
+#define OVL1C2 __REG(0x44000060) /* Overlay 1 Control Register 2 */
+#define OVL2C1 __REG(0x44000070) /* Overlay 2 Control Register 1 */
+#define OVL2C2 __REG(0x44000080) /* Overlay 2 Control Register 2 */
+#define CCR __REG(0x44000090) /* Cursor Control Register */
+
+#define FBR5 __REG(0x44000110) /* DMA Channel 5 Frame Branch Register */
+#define FBR6 __REG(0x44000114) /* DMA Channel 6 Frame Branch Register */
+
+/*
+* Touch screen interface
+*/
+#ifdef CONFIG_CPU_MONAHANS
+#define ADCD __REG(0x41c00000) /*Analog-to-Digital Converter Data register*/
+#define ADCS __REG(0x41c00004) /*Analog-to-Digital Converter Setup register*/
+#define ADCE __REG(0x41c00008) /*Analog-to-Digital Converter Enable register*/
#endif
+
/*
* Memory controller
*/
-#define MEMC_BASE __REG(0x48000000) /* Base of Memory Controller */
-#define MDCNFG_OFFSET 0x0
-#define MDREFR_OFFSET 0x4
-#define MSC0_OFFSET 0x8
-#define MSC1_OFFSET 0xC
-#define MSC2_OFFSET 0x10
-#define MECR_OFFSET 0x14
-#define SXLCR_OFFSET 0x18
-#define SXCNFG_OFFSET 0x1C
-#define FLYCNFG_OFFSET 0x20
-#define SXMRS_OFFSET 0x24
-#define MCMEM0_OFFSET 0x28
-#define MCMEM1_OFFSET 0x2C
-#define MCATT0_OFFSET 0x30
-#define MCATT1_OFFSET 0x34
-#define MCIO0_OFFSET 0x38
-#define MCIO1_OFFSET 0x3C
-#define MDMRS_OFFSET 0x40
-
-#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */
-#define MDCNFG_DE0 0x00000001
-#define MDCNFG_DE1 0x00000002
-#define MDCNFG_DE2 0x00010000
-#define MDCNFG_DE3 0x00020000
-#define MDCNFG_DWID0 0x00000004
+#ifndef CONFIG_CPU_MONAHANS
+#define MEMC_BASE __REG(0x48000000) /* Base of Memory Controller */
+#define MDCNFG_OFFSET 0x0
+#define MDREFR_OFFSET 0x4
+#define MSC0_OFFSET 0x8
+#define MSC1_OFFSET 0xC
+#define MSC2_OFFSET 0x10
+#define MECR_OFFSET 0x14
+#define SXLCR_OFFSET 0x18
+#define SXCNFG_OFFSET 0x1C
+#define FLYCNFG_OFFSET 0x20
+#define SXMRS_OFFSET 0x24
+#define MCMEM0_OFFSET 0x28
+#define MCMEM1_OFFSET 0x2C
+#define MCATT0_OFFSET 0x30
+#define MCATT1_OFFSET 0x34
+#define MCIO0_OFFSET 0x38
+#define MCIO1_OFFSET 0x3C
+#define MDMRS_OFFSET 0x40
+
+#define MDCNFG __REG((0x48000000) /* SDRAM Configuration Register 0 */
+#define MDCNFG_DE0 0x00000001
+#define MDCNFG_DE1 0x00000002
+#define MDCNFG_DE2 0x00010000
+#define MDCNFG_DE3 0x00020000
+#define MDCNFG_DWID0 0x00000004
+#endif
+#ifdef CONFIG_CPU_MONAHANS
+/* Static Memory Controller Registers */
+#define MSC0 __REG_2(0x4A000008) /* Static Memory Control Register 0 */
+#define MSC1 __REG_2(0x4A00000C) /* Static Memory Control Register 1 */
+#define MECR __REG_2(0x4A000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXCNFG __REG_2(0x4A00001C) /* Synchronous Static Memory Control Register */
+#define MCMEM0 __REG_2(0x4A000028) /* Card interface Common Memory Space Socket 0 Timing */
+#define MCATT0 __REG_2(0x4A000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCIO0 __REG_2(0x4A000038) /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MEMCLKCFG __REG_2(0x4A000068) /* SCLK speed configuration */
+#define CSADRCFG0 __REG_2(0x4A000080) /* Address Configuration for chip select 0 */
+#define CSADRCFG1 __REG_2(0x4A000084) /* Address Configuration for chip select 1 */
+#define CSADRCFG2 __REG_2(0x4A000088) /* Address Configuration for chip select 2 */
+#define CSADRCFG3 __REG_2(0x4A00008C) /* Address Configuration for chip select 3 */
+#define CSADRCFG_P __REG_2(0x4A000090) /* Address Configuration for pcmcia card interface */
+#define CSMSADRCFG __REG_2(0x4A0000A0) /* Master Address Configuration Register */
+
+/* Dynamic Memory Controller Registers */
+#define MDCNFG __REG_2(0x48100000) /* SDRAM Configuration Register 0 */
+#define MDREFR __REG_2(0x48100004) /* SDRAM Refresh Control Register */
+#define FLYCNFG __REG_2(0x48100020) /* Fly-by DMA DVAL[1:0] polarities */
+#define MDMRS __REG_2(0x48100040) /* MRS value to be written to SDRAM */
+#define DDR_SCAL __REG_2(0x48100050) /* Software Delay Line Calibration/Configuration for external DDR memory. */
+#define DDR_HCAL __REG_2(0x48100060) /* Hardware Delay Line Calibration/Configuration for external DDR memory. */
+#define DMCIER __REG_2(0x48100070) /* Dynamic MC Interrupt Enable Register. */
+#define DMCISR __REG_2(0x48100078) /* Dynamic MC Interrupt Status Register. */
+#define DDR_DLS __REG_2(0x48100080) /* DDR Delay Line Value Status register for external DDR memory. */
+#define EMPI __REG_2(0x48100090) /* EMPI Control Register */
+#define RCOMP __REG_2(0x48100100)
+#define PAD_MA __REG_2(0x48100110)
+#define PAD_MDMSB __REG_2(0x48100114)
+#define PAD_MDLSB __REG_2(0x48100118)
+#define PAD_DMEM __REG_2(0x4810011c)
+#define PAD_SDCLK __REG_2(0x48100120)
+#define PAD_SDCS __REG_2(0x48100124)
+#define PAD_SMEM __REG_2(0x48100128)
+#define PAD_SCLK __REG_2(0x4810012C)
+
+
+/* Data Flash Controller Registers */
+
+#define NDCR __REG_2(0x43100000) /* Data Flash Control register */
+#define NDTR0CS0 __REG_2(0x43100004) /* Data Controller Timing Parameter 0 Register for ND_nCS0 */
+#define NDTR0CS1 __REG_2(0x43100008) /* Data Controller Timing Parameter 0 Register for ND_nCS1 */
+#define NDTR1CS0 __REG_2(0x4310000C) /* Data Controller Timing Parameter 1 Register for ND_nCS0 */
+#define NDTR1CS1 __REG_2(0x43100010) /* Data Controller Timing Parameter 1 Register for ND_nCS1 */
+#define NDSR __REG_2(0x43100014) /* Data Controller Status Register */
+#define NDPCR __REG_2(0x43100018) /* Data Controller Page Count Register */
+#define NDBDR0 __REG_2(0x4310001C) /* Data Controller Bad Block Register 0 */
+#define NDBDR1 __REG_2(0x43100020) /* Data Controller Bad Block Register 1 */
+#define NDDB __REG_2(0x43100040) /* Data Controller Data Buffer */
+#define NDCB0 __REG_2(0x43100048) /* Data Controller Command Buffer0 */
+#define NDCB1 __REG_2(0x4310004C) /* Data Controller Command Buffer1 */
+#define NDCB2 __REG_2(0x43100050) /* Data Controller Command Buffer2 */
+
+#define NDCR_SPARE_EN (0x1<<31)
+#define NDCR_ECC_EN (0x1<<30)
+#define NDCR_DMA_EN (0x1<<29)
+#define NDCR_ND_RUN (0x1<<28)
+#define NDCR_DWIDTH_C (0x1<<27)
+#define NDCR_DWIDTH_M (0x1<<26)
+#define NDCR_PAGE_SZ (0x3<<24)
+#define NDCR_NCSX (0x1<<23)
+#define NDCR_ND_MODE (0x3<<21)
+#define NDCR_NAND_MODE 0x0
+#define NDCR_CLR_PG_CNT (0x1<<20)
+#define NDCR_CLR_ECC (0x1<<19)
+#define NDCR_RD_ID_CNT (0x7<<16)
+#define NDCR_RA_START (0x1<<15)
+#define NDCR_PG_PER_BLK (0x1<<14)
+#define NDCR_ND_ARB_EN (0x1<<12)
+
+#define NDSR_RDY (0x1<<11)
+#define NDSR_CS0_PAGED (0x1<<10)
+#define NDSR_CS1_PAGED (0x1<<9)
+#define NDSR_CS0_CMDD (0x1<<8)
+#define NDSR_CS1_CMDD (0x1<<7)
+#define NDSR_CS0_BBD (0x1<<6)
+#define NDSR_CS1_BBD (0x1<<5)
+#define NDSR_BDERR (0x1<<4)
+#define NDSR_SBERR (0x1<<3)
+#define NDSR_WRDREQ (0x1<<2)
+#define NDSR_RDDREQ (0x1<<1)
+#define NDSR_WRCMDREQ (0x1)
+
+#define NDCB0_AUTO_RS (0x1<<25)
+#define NDCB0_CSEL (0x1<<24)
+#define NDCB0_CMD_TYPE (0x7<<21)
+#define NDCB0_NC (0x1<<20)
+#define NDCB0_DBC (0x1<<19)
+#define NDCB0_ADDR_CYC (0x7<<16)
+#define NDCB0_CMD2 (0xff<<8)
+#define NDCB0_CMD1 (0xff)
+#define MCMEM(s) MCMEM0
+#define MCATT(s) MCATT0
+#define MCIO(s) MCIO0
+#define MECR_CIT (1 << 1)/* Card Is There: 0 -> no card, 1 -> card inserted */
+#else /* CONFIG_CPU_MONAHANS */
+
+/* mk: defined @2253 #define MDCNFG __REG(0x48000000) /\* SDRAM Configuration Register 0 *\/ */
#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */
#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */
#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */
@@ -1545,6 +2405,19 @@ typedef void (*ExcpHndlr) (void) ;
#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */
#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
+
#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
@@ -1558,14 +2431,15 @@ typedef void (*ExcpHndlr) (void) ;
#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
+#endif
-#if defined(CONFIG_PXA27X)
+#ifdef CONFIG_PXA27X
#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
-#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
+#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
@@ -1573,177 +2447,871 @@ typedef void (*ExcpHndlr) (void) ;
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
-/* Interrupt Controller */
-
-#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
-#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
-#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
-
-/* General Purpose I/O */
-
-#define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */
-#define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */
-#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */
-#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */
-#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */
-#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO <127:96> */
-#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */
-#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */
-#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */
-
-/* Core Clock */
-
-#define CCSR __REG(0x4130000C) /* Core Clock Status Register */
-
-#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */
-#define CKEN22_MEMC (1 << 22) /* Memory Controler */
-#define CKEN21_MSHC (1 << 21) /* Memery Stick Host Controller */
-#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */
-#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */
-#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */
-#define CKEN17_MSL (1 << 17) /* MSL Interface Unit Clock Enable */
-#define CKEN15_PWR_I2C (1 << 15) /* PWR_I2C Unit Clock Enable */
-#define CKEN9_OST (1 << 9) /* OS Timer Unit Clock Enable */
-#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */
-
-/* Memory controller */
-
-#define MDREFR_K0DB4 (1 << 29) /* SDCLK[0] divide by 4 */
-
-/* LCD registers */
-#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 4 */
-#define LCCR5 __REG(0x44000014) /* LCD Controller Control Register 5 */
-#define FBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */
-#define FBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */
-#define FBR2 __REG(0x44000028) /* DMA Channel 2 Frame Branch Register */
-#define FBR3 __REG(0x4400002C) /* DMA Channel 3 Frame Branch Register */
-#define FBR4 __REG(0x44000030) /* DMA Channel 4 Frame Branch Register */
-#define FDADR2 __REG(0x44000220) /* DMA Channel 2 Frame Descriptor Address Register */
-#define FSADR2 __REG(0x44000224) /* DMA Channel 2 Frame Source Address Register */
-#define FIDR2 __REG(0x44000228) /* DMA Channel 2 Frame ID Register */
-#define LDCMD2 __REG(0x4400022C) /* DMA Channel 2 Command Register */
-#define FDADR3 __REG(0x44000230) /* DMA Channel 3 Frame Descriptor Address Register */
-#define FSADR3 __REG(0x44000234) /* DMA Channel 3 Frame Source Address Register */
-#define FIDR3 __REG(0x44000238) /* DMA Channel 3 Frame ID Register */
-#define LDCMD3 __REG(0x4400023C) /* DMA Channel 3 Command Register */
-#define FDADR4 __REG(0x44000240) /* DMA Channel 4 Frame Descriptor Address Register */
-#define FSADR4 __REG(0x44000244) /* DMA Channel 4 Frame Source Address Register */
-#define FIDR4 __REG(0x44000248) /* DMA Channel 4 Frame ID Register */
-#define LDCMD4 __REG(0x4400024C) /* DMA Channel 4 Command Register */
-#define FDADR5 __REG(0x44000250) /* DMA Channel 5 Frame Descriptor Address Register */
-#define FSADR5 __REG(0x44000254) /* DMA Channel 5 Frame Source Address Register */
-#define FIDR5 __REG(0x44000258) /* DMA Channel 5 Frame ID Register */
-#define LDCMD5 __REG(0x4400025C) /* DMA Channel 5 Command Register */
+/*
+ * Keypad
+ */
+#define KPC __REG(0x41500000) /* Keypad Interface Control register */
+#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */
+#define KPREC __REG(0x41500010) /* Keypad Interface Rotary Encoder register */
+#define KPMK __REG(0x41500018) /* Keypad Interface Matrix Key register */
+#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */
+#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
+#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
+#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
+#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
+#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */
+
+#define KPC_AS (0x1 << 30) /* Automatic Scan bit */
+#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */
+#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */
+#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */
+#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */
+#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */
+#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */
+#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */
+#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */
+#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */
+#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */
+#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */
+#define KPC_MS_ALL (KPC_MS0 | KPC_MS1 | KPC_MS2 | KPC_MS3 | KPC_MS4 | KPC_MS5 | KPC_MS6 | KPC_MS7)
+#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */
+#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */
+#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Keypad Debounce Select */
+#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */
+#define KPC_RE_ZERO_DEB (0x1 << 4) /* Rotary Encoder Zero Debounce */
+#define KPC_REE1 (0x1 << 3) /* Rotary Encoder1 Enable */
+#define KPC_REE0 (0x1 << 2) /* Rotary Encoder0 Enable */
+#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */
+#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */
+
+#define KPDK_DKP (0x1 << 31)
+#define KPDK_DK7 (0x1 << 7)
+#define KPDK_DK6 (0x1 << 6)
+#define KPDK_DK5 (0x1 << 5)
+#define KPDK_DK4 (0x1 << 4)
+#define KPDK_DK3 (0x1 << 3)
+#define KPDK_DK2 (0x1 << 2)
+#define KPDK_DK1 (0x1 << 1)
+#define KPDK_DK0 (0x1 << 0)
+
+#define KPREC_OF1 (0x1 << 31)
+#define kPREC_UF1 (0x1 << 30)
+#define KPREC_OF0 (0x1 << 15)
+#define KPREC_UF0 (0x1 << 14)
+
+#define KPMK_MKP (0x1 << 31)
+#define KPAS_SO (0x1 << 31)
+#define KPASMKPx_SO (0x1 << 31)
-#define OVL1C1 __REG(0x44000050) /* Overlay 1 Control Register 1 */
-#define OVL1C2 __REG(0x44000060) /* Overlay 1 Control Register 2 */
-#define OVL2C1 __REG(0x44000070) /* Overlay 2 Control Register 1 */
-#define OVL2C2 __REG(0x44000080) /* Overlay 2 Control Register 2 */
-#define CCR __REG(0x44000090) /* Cursor Control Register */
+/*
+ * UHC: USB Host Controller (OHCI-like) register definitions
+ */
+#define UHC_BASE_PHYS (0x4C000000)
+#define UHCREV __REG(0x4C000000) /* UHC HCI Spec Revision */
+#define UHCHCON __REG(0x4C000004) /* UHC Host Control Register */
+#define UHCCOMS __REG(0x4C000008) /* UHC Command Status Register */
+#define UHCINTS __REG(0x4C00000C) /* UHC Interrupt Status Register */
+#define UHCINTE __REG(0x4C000010) /* UHC Interrupt Enable */
+#define UHCINTD __REG(0x4C000014) /* UHC Interrupt Disable */
+#define UHCHCCA __REG(0x4C000018) /* UHC Host Controller Comm. Area */
+#define UHCPCED __REG(0x4C00001C) /* UHC Period Current Endpt Descr */
+#define UHCCHED __REG(0x4C000020) /* UHC Control Head Endpt Descr */
+#define UHCCCED __REG(0x4C000024) /* UHC Control Current Endpt Descr */
+#define UHCBHED __REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
+#define UHCBCED __REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
+#define UHCDHEAD __REG(0x4C000030) /* UHC Done Head */
+#define UHCFMI __REG(0x4C000034) /* UHC Frame Interval */
+#define UHCFMR __REG(0x4C000038) /* UHC Frame Remaining */
+#define UHCFMN __REG(0x4C00003C) /* UHC Frame Number */
+#define UHCPERS __REG(0x4C000040) /* UHC Periodic Start */
+#define UHCLS __REG(0x4C000044) /* UHC Low Speed Threshold */
+#define UHCRHDA __REG(0x4C000048) /* UHC Root Hub Descriptor A */
+#define UHCRHDB __REG(0x4C00004C) /* UHC Root Hub Descriptor B */
+#define UHCRHS __REG(0x4C000050) /* UHC Root Hub Status */
+#define UHCRHPS1 __REG(0x4C000054) /* UHC Root Hub Port 1 Status */
+#define UHCRHPS2 __REG(0x4C000058) /* UHC Root Hub Port 2 Status */
+#define UHCRHPS3 __REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
+#define UHCRHPS(x) __REG2(0x4C000050, (x)<<2)
+
+#define UHCSTAT __REG(0x4C000060) /* UHC Status Register */
+#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */
+#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/
+#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/
+#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */
+#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */
+#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */
+#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */
+#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */
+#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */
+
+#define UHCHR __REG(0x4C000064) /* UHC Reset Register */
+#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */
+#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */
+#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */
+#define UHCHR_PCPL (1 << 7) /* Power control polarity low */
+#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */
+#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */
+#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */
+#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */
+#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */
+#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */
+#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */
+
+#define UHCHIE __REG(0x4C000068) /* UHC Interrupt Enable Register*/
+#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */
+#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */
+#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */
+#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */
+#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort
+ Interrupt Enable*/
+#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */
+#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */
+
+#define UHCHIT __REG(0x4C00006C) /* UHC Interrupt Test register */
+
+/* Camera Interface */
+#define CICR0 __REG(0x50000000)
+#define CICR1 __REG(0x50000004)
+#define CICR2 __REG(0x50000008)
+#define CICR3 __REG(0x5000000C)
+#define CICR4 __REG(0x50000010)
+#define CISR __REG(0x50000014)
+#define CIFR __REG(0x50000018)
+#define CITOR __REG(0x5000001C)
+#define CIBR0 __REG(0x50000028)
+#define CIBR1 __REG(0x50000030)
+#define CIBR2 __REG(0x50000038)
+
+#define CICR0_DMAEN (1 << 31) /* DMA request enable */
+#define CICR0_PAR_EN (1 << 30) /* Parity enable */
+#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */
+#define CICR0_ENB (1 << 28) /* Camera interface enable */
+#define CICR0_DIS (1 << 27) /* Camera interface disable */
+#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */
+#define CICR0_TOM (1 << 9) /* Time-out mask */
+#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */
+#define CICR0_FEM (1 << 7) /* FIFO-empty mask */
+#define CICR0_EOLM (1 << 6) /* End-of-line mask */
+#define CICR0_PERRM (1 << 5) /* Parity-error mask */
+#define CICR0_QDM (1 << 4) /* Quick-disable mask */
+#define CICR0_CDM (1 << 3) /* Disable-done mask */
+#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */
+#define CICR0_EOFM (1 << 1) /* End-of-frame mask */
+#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */
+
+#define CICR1_TBIT (1 << 31) /* Transparency bit */
+#define CICR1_RGBT_CONV (0x3 << 30) /* RGBT conversion mask */
+#define CICR1_PPL (0x3f << 15) /* Pixels per line mask */
+#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */
+#define CICR1_RGB_F (1 << 11) /* RGB format */
+#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */
+#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */
+#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */
+#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */
+#define CICR1_DW (0x7 << 0) /* Data width mask */
+
+#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock
+ wait count mask */
+#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock
+ wait count mask */
+#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */
+#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
+ wait count mask */
+#define CICR2_FSW (0x7 << 0) /* Frame stabilization
+ wait count mask */
+
+#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock
+ wait count mask */
+#define CICR3_EFW (0xff << 16) /* End-of-frame line clock
+ wait count mask */
+#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */
+#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
+ wait count mask */
+#define CICR3_LPF (0x3ff << 0) /* Lines per frame mask */
+
+#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */
+#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */
+#define CICR4_PCP (1 << 22) /* Pixel clock polarity */
+#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */
+#define CICR4_VSP (1 << 20) /* Vertical sync polarity */
+#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */
+#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */
+#define CICR4_DIV (0xff << 0) /* Clock divisor mask */
+
+#define CISR_FTO (1 << 15) /* FIFO time-out */
+#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */
+#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */
+#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */
+#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */
+#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */
+#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */
+#define CISR_EOL (1 << 8) /* End of line */
+#define CISR_PAR_ERR (1 << 7) /* Parity error */
+#define CISR_CQD (1 << 6) /* Camera interface quick disable */
+#define CISR_SOF (1 << 5) /* Start of frame */
+#define CISR_CDD (1 << 4) /* Camera interface disable done */
+#define CISR_EOF (1 << 3) /* End of frame */
+#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */
+#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */
+#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */
+
+#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */
+#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */
+#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */
+#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */
+#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */
+#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */
+#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */
+#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */
+
+#define SRAM_SIZE 0x40000 /* 4x64K */
+
+#define SRAM_MEM_PHYS 0x5C000000
+
+#define IMPMCR __REG(0x58000000) /* IM Power Management Control Reg */
+#define IMPMSR __REG(0x58000008) /* IM Power Management Status Reg */
+
+#define IMPMCR_PC3 (0x3 << 22) /* Bank 3 Power Control */
+#define IMPMCR_PC3_RUN_MODE (0x0 << 22) /* Run mode */
+#define IMPMCR_PC3_STANDBY_MODE (0x1 << 22) /* Standby mode */
+#define IMPMCR_PC3_AUTO_MODE (0x3 << 22) /* Automatically controlled */
+
+#define IMPMCR_PC2 (0x3 << 20) /* Bank 2 Power Control */
+#define IMPMCR_PC2_RUN_MODE (0x0 << 20) /* Run mode */
+#define IMPMCR_PC2_STANDBY_MODE (0x1 << 20) /* Standby mode */
+#define IMPMCR_PC2_AUTO_MODE (0x3 << 20) /* Automatically controlled */
+
+#define IMPMCR_PC1 (0x3 << 18) /* Bank 1 Power Control */
+#define IMPMCR_PC1_RUN_MODE (0x0 << 18) /* Run mode */
+#define IMPMCR_PC1_STANDBY_MODE (0x1 << 18) /* Standby mode */
+#define IMPMCR_PC1_AUTO_MODE (0x3 << 18) /* Automatically controlled */
+
+#define IMPMCR_PC0 (0x3 << 16) /* Bank 0 Power Control */
+#define IMPMCR_PC0_RUN_MODE (0x0 << 16) /* Run mode */
+#define IMPMCR_PC0_STANDBY_MODE (0x1 << 16) /* Standby mode */
+#define IMPMCR_PC0_AUTO_MODE (0x3 << 16) /* Automatically controlled */
+
+#define IMPMCR_AW3 (1 << 11) /* Bank 3 Automatic Wake-up enable */
+#define IMPMCR_AW2 (1 << 10) /* Bank 2 Automatic Wake-up enable */
+#define IMPMCR_AW1 (1 << 9) /* Bank 1 Automatic Wake-up enable */
+#define IMPMCR_AW0 (1 << 8) /* Bank 0 Automatic Wake-up enable */
+
+#define IMPMCR_DST (0xFF << 0) /* Delay Standby Time, ms */
+
+#define IMPMSR_PS3 (0x3 << 6) /* Bank 3 Power Status: */
+#define IMPMSR_PS3_RUN_MODE (0x0 << 6) /* Run mode */
+#define IMPMSR_PS3_STANDBY_MODE (0x1 << 6) /* Standby mode */
+
+#define IMPMSR_PS2 (0x3 << 4) /* Bank 2 Power Status: */
+#define IMPMSR_PS2_RUN_MODE (0x0 << 4) /* Run mode */
+#define IMPMSR_PS2_STANDBY_MODE (0x1 << 4) /* Standby mode */
+
+#define IMPMSR_PS1 (0x3 << 2) /* Bank 1 Power Status: */
+#define IMPMSR_PS1_RUN_MODE (0x0 << 2) /* Run mode */
+#define IMPMSR_PS1_STANDBY_MODE (0x1 << 2) /* Standby mode */
+
+#define IMPMSR_PS0 (0x3 << 0) /* Bank 0 Power Status: */
+#define IMPMSR_PS0_RUN_MODE (0x0 << 0) /* Run mode */
+#define IMPMSR_PS0_STANDBY_MODE (0x1 << 0) /* Standby mode */
-#define FBR5 __REG(0x44000110) /* DMA Channel 5 Frame Branch Register */
-#define FBR6 __REG(0x44000114) /* DMA Channel 6 Frame Branch Register */
+#endif
-#define LCCR0_LDDALT (1<<26) /* LDD Alternate mapping bit when base pixel is RGBT16 */
-#define LCCR0_OUC (1<<25) /* Overlay Underlay Control Bit */
+/* MFPR */
+#ifdef CONFIG_CPU_MONAHANS
-#define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */
-#define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */
-#define LCCR5_SOFM3 (1<<2) /* Start Of Frame Mask for Overlay 2 (channel 3) */
-#define LCCR5_SOFM4 (1<<3) /* Start Of Frame Mask for Overlay 2 (channel 4) */
-#define LCCR5_SOFM5 (1<<4) /* Start Of Frame Mask for cursor (channel 5) */
-#define LCCR5_SOFM6 (1<<5) /* Start Of Frame Mask for command data (channel 6) */
-
-#define LCCR5_EOFM1 (1<<8) /* End Of Frame Mask for Overlay 1 (channel 1) */
-#define LCCR5_EOFM2 (1<<9) /* End Of Frame Mask for Overlay 2 (channel 2) */
-#define LCCR5_EOFM3 (1<<10) /* End Of Frame Mask for Overlay 2 (channel 3) */
-#define LCCR5_EOFM4 (1<<11) /* End Of Frame Mask for Overlay 2 (channel 4) */
-#define LCCR5_EOFM5 (1<<12) /* End Of Frame Mask for cursor (channel 5) */
-#define LCCR5_EOFM6 (1<<13) /* End Of Frame Mask for command data (channel 6) */
+#define SRAM_SIZE 0xC0000 /* 4x64K */
+#define SRAM_MEM_PHYS 0x5C000000
-#define LCCR5_BSM1 (1<<16) /* Branch mask for Overlay 1 (channel 1) */
-#define LCCR5_BSM2 (1<<17) /* Branch mask for Overlay 2 (channel 2) */
-#define LCCR5_BSM3 (1<<18) /* Branch mask for Overlay 2 (channel 3) */
-#define LCCR5_BSM4 (1<<19) /* Branch mask for Overlay 2 (channel 4) */
-#define LCCR5_BSM5 (1<<20) /* Branch mask for cursor (channel 5) */
-#define LCCR5_BSM6 (1<<21) /* Branch mask for data command (channel 6) */
+/* GPIO alternate function assignments */
+#define APPS_PAD_BASE 0x40E10000
+
+/* MFPR regsiter locations for each pin */
+#define GPIO0_MFPR (APPS_PAD_BASE + 0x0124)
+#define GPIO1_MFPR (APPS_PAD_BASE + 0x0128)
+#define GPIO2_MFPR (APPS_PAD_BASE + 0x012C)
+#define GPIO3_MFPR (APPS_PAD_BASE + 0x0130)
+#define GPIO4_MFPR (APPS_PAD_BASE + 0x0134)
+#define GPIO5_MFPR (APPS_PAD_BASE + 0x028C)
+#define GPIO6_MFPR (APPS_PAD_BASE + 0x0290)
+#define GPIO7_MFPR (APPS_PAD_BASE + 0x0294)
+#define GPIO8_MFPR (APPS_PAD_BASE + 0x0298)
+#define GPIO9_MFPR (APPS_PAD_BASE + 0x029C)
+#define GPIO10_MFPR (APPS_PAD_BASE + 0x0458)
+#define GPIO11_MFPR (APPS_PAD_BASE + 0x02A0)
+#define GPIO12_MFPR (APPS_PAD_BASE + 0x02A4)
+#define GPIO13_MFPR (APPS_PAD_BASE + 0x02A8)
+#define GPIO14_MFPR (APPS_PAD_BASE + 0x02AC)
+#define GPIO15_MFPR (APPS_PAD_BASE + 0x02B0)
+#define GPIO16_MFPR (APPS_PAD_BASE + 0x02B4)
+#define GPIO17_MFPR (APPS_PAD_BASE + 0x02B8)
+#define GPIO18_MFPR (APPS_PAD_BASE + 0x02BC)
+#define GPIO19_MFPR (APPS_PAD_BASE + 0x02C0)
+#define GPIO20_MFPR (APPS_PAD_BASE + 0x02C4)
+#define GPIO21_MFPR (APPS_PAD_BASE + 0x02C8)
+#define GPIO22_MFPR (APPS_PAD_BASE + 0x02CC)
+#define GPIO23_MFPR (APPS_PAD_BASE + 0x02D0)
+#define GPIO24_MFPR (APPS_PAD_BASE + 0x02D4)
+#define GPIO25_MFPR (APPS_PAD_BASE + 0x02D8)
+#define GPIO26_MFPR (APPS_PAD_BASE + 0x02DC)
+#define GPIO27_MFPR (APPS_PAD_BASE + 0x0400)
+#define GPIO28_MFPR (APPS_PAD_BASE + 0x0404)
+#define GPIO29_MFPR (APPS_PAD_BASE + 0x0408)
+#define GPIO30_MFPR (APPS_PAD_BASE + 0x040C)
+#define GPIO31_MFPR (APPS_PAD_BASE + 0x0410)
+#define GPIO32_MFPR (APPS_PAD_BASE + 0x0414)
+#define GPIO33_MFPR (APPS_PAD_BASE + 0x0418)
+#define GPIO34_MFPR (APPS_PAD_BASE + 0x041C)
+#define GPIO35_MFPR (APPS_PAD_BASE + 0x0420)
+#define GPIO36_MFPR (APPS_PAD_BASE + 0x0424)
+#define GPIO37_MFPR (APPS_PAD_BASE + 0x0428)
+#define GPIO38_MFPR (APPS_PAD_BASE + 0x042C)
+#define GPIO39_MFPR (APPS_PAD_BASE + 0x0430)
+#define GPIO40_MFPR (APPS_PAD_BASE + 0x0434)
+#define GPIO41_MFPR (APPS_PAD_BASE + 0x0438)
+#define GPIO42_MFPR (APPS_PAD_BASE + 0x043C)
+#define GPIO43_MFPR (APPS_PAD_BASE + 0x0440)
+#define GPIO44_MFPR (APPS_PAD_BASE + 0x0444)
+#define GPIO45_MFPR (APPS_PAD_BASE + 0x0448)
+#define GPIO46_MFPR (APPS_PAD_BASE + 0x044C)
+#define GPIO47_MFPR (APPS_PAD_BASE + 0x0450)
+#define GPIO48_MFPR (APPS_PAD_BASE + 0x0454)
+#define GPIO49_MFPR (APPS_PAD_BASE + 0x045C)
+#define GPIO50_MFPR (APPS_PAD_BASE + 0x0460)
+#define GPIO51_MFPR (APPS_PAD_BASE + 0x0464)
+#define GPIO52_MFPR (APPS_PAD_BASE + 0x0468)
+#define GPIO53_MFPR (APPS_PAD_BASE + 0x046C)
+#define GPIO54_MFPR (APPS_PAD_BASE + 0x0470)
+#define GPIO55_MFPR (APPS_PAD_BASE + 0x0474)
+#define GPIO56_MFPR (APPS_PAD_BASE + 0x0478)
+#define GPIO57_MFPR (APPS_PAD_BASE + 0x047C)
+#define GPIO58_MFPR (APPS_PAD_BASE + 0x0480)
+#define GPIO59_MFPR (APPS_PAD_BASE + 0x0484)
+#define GPIO60_MFPR (APPS_PAD_BASE + 0x0488)
+#define GPIO61_MFPR (APPS_PAD_BASE + 0x048C)
+#define GPIO62_MFPR (APPS_PAD_BASE + 0x0490)
+#define GPIO63_MFPR (APPS_PAD_BASE + 0x04B4)
+#define GPIO64_MFPR (APPS_PAD_BASE + 0x04B8)
+#define GPIO65_MFPR (APPS_PAD_BASE + 0x04BC)
+#define GPIO66_MFPR (APPS_PAD_BASE + 0x04C0)
+#define GPIO67_MFPR (APPS_PAD_BASE + 0x04C4)
+#define GPIO68_MFPR (APPS_PAD_BASE + 0x04C8)
+#define GPIO69_MFPR (APPS_PAD_BASE + 0x04CC)
+#define GPIO70_MFPR (APPS_PAD_BASE + 0x04D0)
+#define GPIO71_MFPR (APPS_PAD_BASE + 0x04D4)
+#define GPIO72_MFPR (APPS_PAD_BASE + 0x04D8)
+#define GPIO73_MFPR (APPS_PAD_BASE + 0x04DC)
+#define GPIO74_MFPR (APPS_PAD_BASE + 0x04F0)
+#define GPIO75_MFPR (APPS_PAD_BASE + 0x04F4)
+#define GPIO76_MFPR (APPS_PAD_BASE + 0x04F8)
+#define GPIO77_MFPR (APPS_PAD_BASE + 0x04FC)
+#define GPIO78_MFPR (APPS_PAD_BASE + 0x0500)
+#define GPIO79_MFPR (APPS_PAD_BASE + 0x0504)
+#define GPIO80_MFPR (APPS_PAD_BASE + 0x0508)
+#define GPIO81_MFPR (APPS_PAD_BASE + 0x050C)
+#define GPIO82_MFPR (APPS_PAD_BASE + 0x0510)
+#define GPIO83_MFPR (APPS_PAD_BASE + 0x0514)
+#define GPIO84_MFPR (APPS_PAD_BASE + 0x0518)
+#define GPIO85_MFPR (APPS_PAD_BASE + 0x051C)
+#define GPIO86_MFPR (APPS_PAD_BASE + 0x0520)
+#define GPIO87_MFPR (APPS_PAD_BASE + 0x0524)
+#define GPIO88_MFPR (APPS_PAD_BASE + 0x0528)
+#define GPIO89_MFPR (APPS_PAD_BASE + 0x052C)
+#define GPIO90_MFPR (APPS_PAD_BASE + 0x0530)
+#define GPIO91_MFPR (APPS_PAD_BASE + 0x0534)
+#define GPIO92_MFPR (APPS_PAD_BASE + 0x0538)
+#define GPIO93_MFPR (APPS_PAD_BASE + 0x053C)
+#define GPIO94_MFPR (APPS_PAD_BASE + 0x0540)
+#define GPIO95_MFPR (APPS_PAD_BASE + 0x0544)
+#define GPIO96_MFPR (APPS_PAD_BASE + 0x0548)
+#define GPIO97_MFPR (APPS_PAD_BASE + 0x054C)
+#define GPIO98_MFPR (APPS_PAD_BASE + 0x0550)
+#define GPIO99_MFPR (APPS_PAD_BASE + 0x0600)
+#define GPIO100_MFPR (APPS_PAD_BASE + 0x0604)
+#define GPIO101_MFPR (APPS_PAD_BASE + 0x0608)
+#define GPIO102_MFPR (APPS_PAD_BASE + 0x060C)
+#define GPIO103_MFPR (APPS_PAD_BASE + 0x0610)
+#define GPIO104_MFPR (APPS_PAD_BASE + 0x0614)
+#define GPIO105_MFPR (APPS_PAD_BASE + 0x0618)
+#define GPIO106_MFPR (APPS_PAD_BASE + 0x061C)
+#define GPIO107_MFPR (APPS_PAD_BASE + 0x0620)
+#define GPIO108_MFPR (APPS_PAD_BASE + 0x0624)
+#define GPIO109_MFPR (APPS_PAD_BASE + 0x0628)
+#define GPIO110_MFPR (APPS_PAD_BASE + 0x062C)
+#define GPIO111_MFPR (APPS_PAD_BASE + 0x0630)
+#define GPIO112_MFPR (APPS_PAD_BASE + 0x0634)
+#define GPIO113_MFPR (APPS_PAD_BASE + 0x0638)
+#define GPIO114_MFPR (APPS_PAD_BASE + 0x063C)
+#define GPIO115_MFPR (APPS_PAD_BASE + 0x0640)
+#define GPIO116_MFPR (APPS_PAD_BASE + 0x0644)
+#define GPIO117_MFPR (APPS_PAD_BASE + 0x0648)
+#define GPIO118_MFPR (APPS_PAD_BASE + 0x064C)
+#define GPIO119_MFPR (APPS_PAD_BASE + 0x0650)
+#define GPIO120_MFPR (APPS_PAD_BASE + 0x0654)
+#define GPIO121_MFPR (APPS_PAD_BASE + 0x0658)
+#define GPIO122_MFPR (APPS_PAD_BASE + 0x065C)
+#define GPIO123_MFPR (APPS_PAD_BASE + 0x0660)
+#define GPIO124_MFPR (APPS_PAD_BASE + 0x0664)
+#define GPIO125_MFPR (APPS_PAD_BASE + 0x0668)
+#define GPIO126_MFPR (APPS_PAD_BASE + 0x066C)
+#define GPIO127_MFPR (APPS_PAD_BASE + 0x0670)
+#define GPIO0_2_MFPR (APPS_PAD_BASE + 0x0674) /* MFPR for GPIO0_2 */
+#define GPIO1_2_MFPR (APPS_PAD_BASE + 0x0678) /* MFPR for GPIO1_2 */
+#define GPIO2_2_MFPR (APPS_PAD_BASE + 0x067C) /* MFPR for GPIO2_2 */
+#define GPIO3_2_MFPR (APPS_PAD_BASE + 0x0680) /* MFPR for GPIO3_2 */
+#define GPIO4_2_MFPR (APPS_PAD_BASE + 0x0684) /* MFPR for GPIO4_2 */
+#define GPIO5_2_MFPR (APPS_PAD_BASE + 0x0688) /* MFPR for GPIO5_2 */
+#define GPIO6_2_MFPR (APPS_PAD_BASE + 0x0494) /* MFPR for GPIO6_2 */
+#define GPIO7_2_MFPR (APPS_PAD_BASE + 0x0498) /* MFPR for GPIO7_2 */
+#define GPIO8_2_MFPR (APPS_PAD_BASE + 0x049C) /* MFPR for GPIO8_2 */
+#define GPIO9_2_MFPR (APPS_PAD_BASE + 0x04A0) /* MFPR for GPIO9_2 */
+#define GPIO10_2_MFPR (APPS_PAD_BASE + 0x04A4) /* MFPR for GPIO10_2 */
+#define GPIO11_2_MFPR (APPS_PAD_BASE + 0x04A8) /* MFPR for GPIO11_2 */
+#define GPIO12_2_MFPR (APPS_PAD_BASE + 0x04AC) /* MFPR for GPIO12_2 */
+#define GPIO13_2_MFPR (APPS_PAD_BASE + 0x04B0) /* MFPR for GPIO13_2 */
+#define GPIO14_2_MFPR (APPS_PAD_BASE + 0x04E0) /* MFPR for GPIO14_2 */
+#define GPIO15_2_MFPR (APPS_PAD_BASE + 0x04E4) /* MFPR for GPIO15_2 */
+#define GPIO16_2_MFPR (APPS_PAD_BASE + 0x04E8) /* MFPR for GPIO16_2 */
+#define GPIO17_2_MFPR (APPS_PAD_BASE + 0x04EC) /* MFPR for GPIO17_2 */
+
+#define PIN_nXCVREN_MFPR (APPS_PAD_BASE + 0x0138)
+#define PIN_ND_CLE_MFPR (APPS_PAD_BASE + 0x0204)
+#define PIN_DF_nADV1_ALE_MFPR (APPS_PAD_BASE + 0x0208)
+#define PIN_DF_SCLK_S_MFPR (APPS_PAD_BASE + 0x020C)
+#define PIN_DF_SCLK_E_MFPR (APPS_PAD_BASE + 0x0210)
+#define PIN_nBE0_MFPR (APPS_PAD_BASE + 0x0214)
+#define PIN_nBE1_MFPR (APPS_PAD_BASE + 0x0218)
+#define PIN_DF_nADV2_ALE_MFPR (APPS_PAD_BASE + 0x021C)
+#define PIN_DF_INT_RnB_MFPR (APPS_PAD_BASE + 0x0220)
+#define PIN_DF_nCS0_MFPR (APPS_PAD_BASE + 0x0224)
+#define PIN_DF_nCS1_MFPR (APPS_PAD_BASE + 0x0228)
+#define PIN_DF_nWE_MFPR (APPS_PAD_BASE + 0x022C)
+#define PIN_DF_nRE_nOE_MFPR (APPS_PAD_BASE + 0x0230)
+#define PIN_nLUA_MFPR (APPS_PAD_BASE + 0x0234)
+#define PIN_nLLA_MFPR (APPS_PAD_BASE + 0x0238)
+#define PIN_DF_ADDR0_MFPR (APPS_PAD_BASE + 0x023C)
+#define PIN_DF_ADDR1_MFPR (APPS_PAD_BASE + 0x0240)
+#define PIN_DF_ADDR2_MFPR (APPS_PAD_BASE + 0x0244)
+#define PIN_DF_ADDR3_MFPR (APPS_PAD_BASE + 0x0248)
+#define PIN_DF_IO0_MFPR (APPS_PAD_BASE + 0x024C)
+#define PIN_DF_IO1_MFPR (APPS_PAD_BASE + 0x0254)
+#define PIN_DF_IO2_MFPR (APPS_PAD_BASE + 0x025C)
+#define PIN_DF_IO3_MFPR (APPS_PAD_BASE + 0x0264)
+#define PIN_DF_IO4_MFPR (APPS_PAD_BASE + 0x026C)
+#define PIN_DF_IO5_MFPR (APPS_PAD_BASE + 0x0274)
+#define PIN_DF_IO6_MFPR (APPS_PAD_BASE + 0x027C)
+#define PIN_DF_IO7_MFPR (APPS_PAD_BASE + 0x0294)
+#define PIN_DF_IO8_MFPR (APPS_PAD_BASE + 0x0298)
+#define PIN_DF_IO9_MFPR (APPS_PAD_BASE + 0x029C)
+#define PIN_DF_IO10_MFPR (APPS_PAD_BASE + 0x0260)
+#define PIN_DF_IO11_MFPR (APPS_PAD_BASE + 0x0268)
+#define PIN_DF_IO12_MFPR (APPS_PAD_BASE + 0x0270)
+#define PIN_DF_IO13_MFPR (APPS_PAD_BASE + 0x0278)
+#define PIN_DF_IO14_MFPR (APPS_PAD_BASE + 0x0280)
+#define PIN_DF_IO15_MFPR (APPS_PAD_BASE + 0x0288)
+
+/* GPIO mode encodings: Direction, Number, MFPR value */
+
+#define MFPR_PS 0x80000000 /* MFPR bit 15: pull_sel */
+#define MFPR_PUE 0x40000000 /* MFPR bit 14: pullup_en */
+#define MFPR_PDE 0x20000000 /* MFPR bit 13: pulldown_en */
+#define MFPR_DF1 0x00000000 /* MFPR bit 12-10: drive, fast 1ma */
+#define MFPR_DF2 0x04000000 /* MFPR bit 12-10: drive, fast 2ma */
+#define MFPR_DF3 0x08000000 /* MFPR bit 12-10: drive, fast 3ma */
+#define MFPR_DF4 0x0c000000 /* MFPR bit 12-10: drive, fast 4ma */
+#define MFPR_DS6 0x10000000 /* MFPR bit 12-10: drive, slow 6ma */
+#define MFPR_DF6 0x14000000 /* MFPR bit 12-10: drive, fast 6ma */
+#define MFPR_DS10 0x18000000 /* MFPR bit 12-10: drive, slow 10ma */
+#define MFPR_DF10 0x1c000000 /* MFPR bit 12-10: drive, fast 10ma */
+#define MFPR_SS 0x02000000 /* MFPR bit 9: sleep_sel */
+#define MFPR_SD 0x01000000 /* MFPR bit 8: sleep_data */
+#define MFPR_SE 0x00800000 /* MFPR bit 7: sleep_oe */
+#define MFPR_EC 0x00400000 /* MFPR bit 6: edge_clear */
+#define MFPR_EF 0x00200000 /* MFPR bit 5: edge_fall_en */
+#define MFPR_ER 0x00100000 /* MFPR bit 4: edge_rise_en */
+#define MFPR_ALT0 0x00000000 /* MFPR bit 2-0: alternate function 0 */
+#define MFPR_ALT1 0x00010000 /* MFPR bit 2-0: alternate function 1 */
+#define MFPR_ALT2 0x00020000 /* MFPR bit 2-0: alternate function 2 */
+#define MFPR_ALT3 0x00030000 /* MFPR bit 2-0: alternate function 3 */
+#define MFPR_ALT4 0x00040000 /* MFPR bit 2-0: alternate function 4 */
+#define MFPR_ALT5 0x00050000 /* MFPR bit 2-0: alternate function 5 */
+#define MFPR_ALT6 0x00060000 /* MFPR bit 2-0: alternate function 6 */
+#define MFPR_ALT7 0x00070000 /* MFPR bit 2-0: alternate function 7 */
+#define GPIO_MD_MASK_NR 0x0000ffff
+#define GPIO_MD_MASK_MFPR 0xffff0000
+#define GPIO_MD_SHIFT_MFPR 16
+
+#define GPIO3_NCS_2 (3|MFPR_DS6|MFPR_ALT1)
+#define GPIO11_PWM0 (11|MFPR_DS6|MFPR_ALT1)
+#define GPIO12_PWM1 (12|MFPR_DS6|MFPR_ALT1)
+#define GPIO14_LCD_BACKLIGHT_PWM3 (14|MFPR_DS6|MFPR_ALT1)
+
+#define GPIO18_MMC_DAT_0 (18|MFPR_DS6|MFPR_ALT4)
+#define GPIO19_MMC_DAT_1 (19|MFPR_DS6|MFPR_ALT4)
+#define GPIO20_MMC_DAT_2 (20|MFPR_DS6|MFPR_ALT4)
+#define GPIO21_MMC_DAT_3 (21|MFPR_DS6|MFPR_ALT4)
+#define GPIO22_CLK_MMC (22|MFPR_DS6|MFPR_ALT4)
+#define GPIO23_MMC_CMD (23|MFPR_DS6|MFPR_ALT4)
+#define GPIO24_MMC2_DAT_0 (24|MFPR_DS6|MFPR_ALT4)
+#define GPIO25_MMC2_DAT_1 (25|MFPR_DS6|MFPR_ALT4)
+#define GPIO26_MMC2_DAT_2 (26|MFPR_DS6|MFPR_ALT4)
+#define GPIO27_MMC2_DAT_3 (27|MFPR_DS6|MFPR_ALT4)
+#define GPIO28_CLK_MMC2 (28|MFPR_DS6|MFPR_ALT4)
+#define GPIO29_MMC2_CMD (29|MFPR_DS6|MFPR_ALT4)
+#define GPIO30_CLK_MMC (30|MFPR_DS6|MFPR_ALT4)
+#define GPIO31_MMC_CMD (31|MFPR_DS6|MFPR_ALT4)
+#define GPIO34_AC97_SYSCLK (34|MFPR_DF6|MFPR_ALT1)
+#define GPIO35_AC97_SDATA_IN0 (35|MFPR_DF6|MFPR_ALT1)
+#define GPIO36_AC97_SDATA_IN1 (36|MFPR_DF6|MFPR_ALT1)
+#define GPIO37_AC97_SDATA_OUT (37|MFPR_DF6|MFPR_ALT1)
+#define GPIO38_AC97_SYNC (38|MFPR_DF6|MFPR_ALT1)
+#define GPIO39_AC97_BITCLK (39|MFPR_DF6|MFPR_ALT1)
+#define GPIO40_AC97_RESET_N (40|MFPR_DF6|MFPR_ALT1)
+#define GPIO41_FF_UART1_RXD (41|MFPR_DS6|MFPR_ALT2)
+#define GPIO42_FF_UART1_TXD (42|MFPR_DS6|MFPR_ALT2)
+#define GPIO43_FF_UART1_CTS (43|MFPR_DS6|MFPR_ALT2)
+#define GPIO44_FF_UART1_DCD (44|MFPR_DF10|MFPR_SD|MFPR_ALT2)
+#define GPIO45_FF_UART1_DSR (45|MFPR_DS6|MFPR_ALT2)
+#define GPIO46_FF_UART1_RI (46|MFPR_DS6|MFPR_ALT2)
+#define GPIO47_FF_UART1_DTR (47|MFPR_DS6|MFPR_ALT2)
+#define GPIO48_FF_UART1_RTS (48|MFPR_DS6|MFPR_ALT2)
+#define GPIO49_CIF_DD0 (49|MFPR_DF6|MFPR_ALT1)
+#define GPIO50_CIF_DD1 (50|MFPR_DF6|MFPR_ALT1)
+#define GPIO51_CIF_DD2 (51|MFPR_DF6|MFPR_ALT1)
+#define GPIO52_CIF_DD3 (52|MFPR_DF6|MFPR_ALT1)
+#define GPIO53_CIF_DD4 (53|MFPR_DF6|MFPR_ALT1)
+#define GPIO54_CIF_DD5 (54|MFPR_DF6|MFPR_ALT1)
+#define GPIO55_CIF_DD6 (55|MFPR_DF6|MFPR_ALT1)
+#define GPIO56_CIF_DD7 (56|MFPR_DF6|MFPR_ALT1)
+#define GPIO57_CIF_DD8 (57|MFPR_DF6|MFPR_ALT1)
+#define GPIO58_CIF_DD9 (58|MFPR_DF6|MFPR_ALT1)
+#define GPIO59_CIF_MCLK (59|MFPR_DF6|MFPR_ALT1)
+#define GPIO60_CIF_PCLK (60|MFPR_DF6|MFPR_ALT1)
+#define GPIO61_CIF_LV (61|MFPR_DF6|MFPR_ALT1)
+#define GPIO62_CIF_FV (62|MFPR_DF6|MFPR_ALT1)
+#define GPIO63_LCD_LDD_8 (63|MFPR_DF6|MFPR_ALT1)
+#define GPIO64_LCD_LDD_9 (64|MFPR_DF6|MFPR_ALT1)
+#define GPIO65_LCD_LDD_10 (65|MFPR_DF6|MFPR_ALT1)
+#define GPIO66_LCD_LDD_11 (66|MFPR_DF6|MFPR_ALT1)
+#define GPIO67_LCD_LDD_12 (67|MFPR_DF6|MFPR_ALT1)
+#define GPIO68_LCD_LDD_13 (68|MFPR_DF6|MFPR_ALT1)
+#define GPIO69_LCD_LDD_14 (69|MFPR_DF6|MFPR_ALT1)
+#define GPIO70_LCD_LDD_15 (70|MFPR_DF6|MFPR_ALT1)
+#define GPIO71_LCD_LDD_16 (71|MFPR_DF6|MFPR_ALT1)
+#define GPIO72_LCD_LDD_17 (72|MFPR_DF6|MFPR_ALT1)
+#define GPIO73_LCD_CS (73|MFPR_DF6|MFPR_ALT2)
+#define GPIO74_LCD_VSYNC (74|MFPR_DF6|MFPR_ALT2)
+#define GPIO89_SSP3_SCLK (89|MFPR_DS6|MFPR_ALT1)
+#define GPIO90_SSP3_SFRM (90|MFPR_DS6|MFPR_ALT1)
+#define GPIO91_SSP3_TXD (91|MFPR_DS6|MFPR_ALT1)
+#define GPIO92_SSP3_RXD (92|MFPR_DS6|MFPR_ALT1)
+#define GPIO93_SSP4_SCLK (93|MFPR_DS6|MFPR_ALT1)
+#define GPIO94_SSP4_SFRM (94|MFPR_DS6|MFPR_ALT1)
+#define GPIO95_SSP4_TXD (95|MFPR_DS6|MFPR_ALT1)
+#define GPIO96_SSP4_RXD (96|MFPR_DS6|MFPR_ALT1)
+#define GPIO100_USB_P2_4 (100|MFPR_DS6|MFPR_ALT2)
+#define GPIO101_USB_P2_8 (101|MFPR_DS6|MFPR_ALT2)
+#define GPIO102_USB_P2_3 (102|MFPR_DS6|MFPR_ALT2)
+#define GPIO103_USB_P2_5 (103|MFPR_DS6|MFPR_ALT2)
+#define GPIO104_USB_P2_7 (104|MFPR_DS6|MFPR_ALT2)
+#define GPIO105_KP_DKIN_0 (105|MFPR_DS6|MFPR_ALT2)
+#define GPIO106_KP_DKIN_1 (106|MFPR_DS6|MFPR_ALT2)
+#define GPIO107_STD_UART3_TXD (107|MFPR_DS6|MFPR_ALT1)
+#define GPIO108_STD_UART3_RXD (108|MFPR_DS6|MFPR_ALT1)
+#define GPIO109_BT_UART2_RTS (109|MFPR_DS6|MFPR_ALT1)
+#define GPIO110_BT_UART2_RXD (110|MFPR_DS6|MFPR_ALT1)
+#define GPIO111_BT_UART2_TXD (111|MFPR_DS6|MFPR_ALT1)
+#define GPIO112_BT_UART2_CTS (112|MFPR_DS6|MFPR_ALT1)
+#define GPIO113_KP_MKIN_0 (113|MFPR_DS6|MFPR_ALT1)
+#define GPIO114_KP_MKIN_1 (114|MFPR_DS6|MFPR_ALT1)
+#define GPIO115_KP_MKIN_2 (115|MFPR_DS6|MFPR_ALT1)
+#define GPIO116_KP_MKIN_3 (116|MFPR_DS6|MFPR_ALT1)
+#define GPIO117_KP_MKIN_4 (117|MFPR_DS6|MFPR_ALT1)
+#define GPIO118_KP_MKIN_5 (118|MFPR_DS6|MFPR_ALT1)
+#define GPIO119_KP_MKIN_6 (119|MFPR_DS6|MFPR_ALT1)
+#define GPIO120_KP_MKIN_7 (120|MFPR_DS6|MFPR_ALT1)
+#define GPIO121_KP_MKOUT_0 (121|MFPR_DS6|MFPR_ALT1)
+#define GPIO122_KP_MKOUT_1 (122|MFPR_DS6|MFPR_ALT1)
+#define GPIO123_KP_MKOUT_2 (123|MFPR_DS6|MFPR_ALT1)
+#define GPIO124_KP_MKOUT_3 (124|MFPR_DS6|MFPR_ALT1)
+#define GPIO125_KP_MKOUT_4 (125|MFPR_DS6|MFPR_ALT1)
+#define GPIO126_KP_MKOUT_5 (126|MFPR_DS6|MFPR_ALT1)
+#define GPIO127_KP_MKOUT_6 (127|MFPR_DS6|MFPR_ALT1)
+#define GPIO5_2_KP_MKOUT_7 (133|MFPR_DS6|MFPR_ALT1)
+#define GPIO6_2_LCD_LDD_0 (134|MFPR_DS6|MFPR_ALT1)
+#define GPIO7_2_LCD_LDD_1 (135|MFPR_DS6|MFPR_ALT1)
+#define GPIO8_2_LCD_LDD_2 (136|MFPR_DS6|MFPR_ALT1)
+#define GPIO9_2_LCD_LDD_3 (137|MFPR_DS6|MFPR_ALT1)
+#define GPIO10_2_LCD_LDD_4 (138|MFPR_DS6|MFPR_ALT1)
+#define GPIO11_2_LCD_LDD_5 (139|MFPR_DS6|MFPR_ALT1)
+#define GPIO12_2_LCD_LDD_6 (140|MFPR_DS6|MFPR_ALT1)
+#define GPIO13_2_LCD_LDD_7 (141|MFPR_DS6|MFPR_ALT1)
+#define GPIO14_2_LCD_FCLK (142|MFPR_DS6|MFPR_ALT1)
+#define GPIO15_2_LCD_LCLK (143|MFPR_DS6|MFPR_ALT1)
+#define GPIO16_2_LCD_PCLK (144|MFPR_DS6|MFPR_ALT1)
+#define GPIO17_2_LCD_BIAS (145|MFPR_DS6|MFPR_ALT1)
+
+/* Internal System Bus Arbiter */
+#define ARB_CNTRL1 __REG_2(0x4600FE00) /* PX1 Bus Arbiter Control Register */
+#define ARB_CNTRL2 __REG_2(0x4600FE80) /* PX2 Bus Arbiter Control Register */
-#define LCCR5_IUM1 (1<<24) /* Input FIFO Underrun Mask for Overlay 1 */
-#define LCCR5_IUM2 (1<<25) /* Input FIFO Underrun Mask for Overlay 2 */
-#define LCCR5_IUM3 (1<<26) /* Input FIFO Underrun Mask for Overlay 2 */
-#define LCCR5_IUM4 (1<<27) /* Input FIFO Underrun Mask for Overlay 2 */
-#define LCCR5_IUM5 (1<<28) /* Input FIFO Underrun Mask for cursor */
-#define LCCR5_IUM6 (1<<29) /* Input FIFO Underrun Mask for data command */
+/*
+ * Keypad
+ */
+#define KPC __REG(0x41500000) /* Keypad Interface Control register */
+#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */
+#define KPREC __REG(0x41500010) /* Keypad Interface Rotary Encoder register */
+#define KPMK __REG(0x41500018) /* Keypad Interface Matrix Key register */
+#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */
+#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
+#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
+#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
+#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
+#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */
+
+#define KPC_AS (0x1 << 30) /* Automatic Scan bit */
+#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */
+#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */
+#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */
+#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */
+#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */
+#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */
+#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */
+#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */
+#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */
+#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */
+#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */
+#define KPC_MS_ALL (KPC_MS0 | KPC_MS1 | KPC_MS2 | KPC_MS3 | KPC_MS4 | KPC_MS5 | KPC_MS6 | KPC_MS7)
+#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */
+#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */
+#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Keypad Debounce Select */
+#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */
+#define KPC_RE_ZERO_DEB (0x1 << 4) /* Rotary Encoder Zero Debounce */
+#define KPC_REE1 (0x1 << 3) /* Rotary Encoder1 Enable */
+#define KPC_REE0 (0x1 << 2) /* Rotary Encoder0 Enable */
+#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */
+#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */
+
+#define KPDK_DKP (0x1 << 31)
+#define KPDK_DK7 (0x1 << 7)
+#define KPDK_DK6 (0x1 << 6)
+#define KPDK_DK5 (0x1 << 5)
+#define KPDK_DK4 (0x1 << 4)
+#define KPDK_DK3 (0x1 << 3)
+#define KPDK_DK2 (0x1 << 2)
+#define KPDK_DK1 (0x1 << 1)
+#define KPDK_DK0 (0x1 << 0)
+
+#define KPREC_OF1 (0x1 << 31)
+#define kPREC_UF1 (0x1 << 30)
+#define KPREC_OF0 (0x1 << 15)
+#define KPREC_UF0 (0x1 << 14)
+
+#define KPMK_MKP (0x1 << 31)
+#define KPAS_SO (0x1 << 31)
+#define KPASMKPx_SO (0x1 << 31)
-#define OVL1C1_O1EN (1<<31) /* Enable bit for Overlay 1 */
-#define OVL2C1_O2EN (1<<31) /* Enable bit for Overlay 2 */
-#define CCR_CEN (1<<31) /* Enable bit for Cursor */
+/*
+ * UHC: USB Host Controller (OHCI-like) register definitions
+ */
+#define UHC_BASE_PHYS (0x4C000000)
+#define UHCREV __REG_2(0x4C000000) /* UHC HCI Spec Revision */
+#define UHCHCON __REG_2(0x4C000004) /* UHC Host Control Register */
+#define UHCCOMS __REG_2(0x4C000008) /* UHC Command Status Register */
+#define UHCINTS __REG_2(0x4C00000C) /* UHC Interrupt Status Register */
+#define UHCINTE __REG_2(0x4C000010) /* UHC Interrupt Enable */
+#define UHCINTD __REG_2(0x4C000014) /* UHC Interrupt Disable */
+#define UHCHCCA __REG_2(0x4C000018) /* UHC Host Controller Comm. Area */
+#define UHCPCED __REG_2(0x4C00001C) /* UHC Period Current Endpt Descr */
+#define UHCCHED __REG_2(0x4C000020) /* UHC Control Head Endpt Descr */
+#define UHCCCED __REG_2(0x4C000024) /* UHC Control Current Endpt Descr */
+#define UHCBHED __REG_2(0x4C000028) /* UHC Bulk Head Endpt Descr */
+#define UHCBCED __REG_2(0x4C00002C) /* UHC Bulk Current Endpt Descr */
+#define UHCDHEAD __REG_2(0x4C000030) /* UHC Done Head */
+#define UHCFMI __REG_2(0x4C000034) /* UHC Frame Interval */
+#define UHCFMR __REG_2(0x4C000038) /* UHC Frame Remaining */
+#define UHCFMN __REG_2(0x4C00003C) /* UHC Frame Number */
+#define UHCPERS __REG_2(0x4C000040) /* UHC Periodic Start */
+#define UHCLS __REG_2(0x4C000044) /* UHC Low Speed Threshold */
+#define UHCRHDA __REG_2(0x4C000048) /* UHC Root Hub Descriptor A */
+#define UHCRHDB __REG_2(0x4C00004C) /* UHC Root Hub Descriptor B */
+#define UHCRHS __REG_2(0x4C000050) /* UHC Root Hub Status */
+#define UHCRHPS1 __REG_2(0x4C000054) /* UHC Root Hub Port 1 Status */
+#define UHCRHPS2 __REG_2(0x4C000058) /* UHC Root Hub Port 2 Status */
+#define UHCRHPS3 __REG_2(0x4C00005C) /* UHC Root Hub Port 3 Status */
+#define UHCRHPS(x) __REG2_2(0x4C000050, (x)<<2)
+
+#define UHCSTAT __REG_2(0x4C000060) /* UHC Status Register */
+#define UHCSTAT_UPS3 (1 << 16) /* USB Power Sense Port3 */
+#define UHCSTAT_SBMAI (1 << 15) /* System Bus Master Abort Interrupt*/
+#define UHCSTAT_SBTAI (1 << 14) /* System Bus Target Abort Interrupt*/
+#define UHCSTAT_UPRI (1 << 13) /* USB Port Resume Interrupt */
+#define UHCSTAT_UPS2 (1 << 12) /* USB Power Sense Port 2 */
+#define UHCSTAT_UPS1 (1 << 11) /* USB Power Sense Port 1 */
+#define UHCSTAT_HTA (1 << 10) /* HCI Target Abort */
+#define UHCSTAT_HBA (1 << 8) /* HCI Buffer Active */
+#define UHCSTAT_RWUE (1 << 7) /* HCI Remote Wake Up Event */
+
+#define UHCHR __REG_2(0x4C000064) /* UHC Reset Register */
+#define UHCHR_SSEP3 (1 << 11) /* Sleep Standby Enable for Port3 */
+#define UHCHR_SSEP2 (1 << 10) /* Sleep Standby Enable for Port2 */
+#define UHCHR_SSEP1 (1 << 9) /* Sleep Standby Enable for Port1 */
+#define UHCHR_PCPL (1 << 7) /* Power control polarity low */
+#define UHCHR_PSPL (1 << 6) /* Power sense polarity low */
+#define UHCHR_SSE (1 << 5) /* Sleep Standby Enable */
+#define UHCHR_UIT (1 << 4) /* USB Interrupt Test */
+#define UHCHR_SSDC (1 << 3) /* Simulation Scale Down Clock */
+#define UHCHR_CGR (1 << 2) /* Clock Generation Reset */
+#define UHCHR_FHR (1 << 1) /* Force Host Controller Reset */
+#define UHCHR_FSBIR (1 << 0) /* Force System Bus Iface Reset */
+
+#define UHCHIE __REG_2(0x4C000068) /* UHC Interrupt Enable Register*/
+#define UHCHIE_UPS3IE (1 << 14) /* Power Sense Port3 IntEn */
+#define UHCHIE_UPRIE (1 << 13) /* Port Resume IntEn */
+#define UHCHIE_UPS2IE (1 << 12) /* Power Sense Port2 IntEn */
+#define UHCHIE_UPS1IE (1 << 11) /* Power Sense Port1 IntEn */
+#define UHCHIE_TAIE (1 << 10) /* HCI Interface Transfer Abort
+ Interrupt Enable*/
+#define UHCHIE_HBAIE (1 << 8) /* HCI Buffer Active IntEn */
+#define UHCHIE_RWIE (1 << 7) /* Remote Wake-up IntEn */
+
+#define UHCHIT __REG_2(0x4C00006C) /* UHC Interrupt Test register */
+
+/* Camera Interface / Quick Capture Interface */
+#define CICR0 __REG_3(0x50000000) /* Control register 0 */
+#define CICR1 __REG_3(0x50000004) /* Control register 1 */
+#define CICR2 __REG_3(0x50000008) /* Control register 2 */
+#define CICR3 __REG_3(0x5000000C) /* Control register 3 */
+#define CICR4 __REG_3(0x50000010) /* Control register 4 */
+#define CISR __REG_3(0x50000014) /* Status register */
+#define CITOR __REG_3(0x5000001C) /* Time-Out register */
+#define CIBR0 __REG_3(0x50000028) /* Channel 0 Receive Buffer */
+#define CIBR1 __REG_3(0x50000030) /* Channel 1 Receive Buffer */
+#define CIBR2 __REG_3(0x50000038) /* Channel 2 Receive Buffer */
+#define CIBR3 __REG_3(0x50000040) /* Channel 3 Receive Buffer */
+
+#define CIPSS __REG_3(0x50000064) /* Pixel Substitution Status register */
+#define CIPBUF __REG_3(0x50000068) /* Pixel Substitution Buffer */
+#define CIHST __REG_3(0x5000006C) /* Histogram Configuration */
+#define CISUM __REG_3(0x50000070) /* Histogram Summation register */
+#define CICCR __REG_3(0x50000074) /* Compander Configuration */
+#define CISSC __REG_3(0x5000007C) /* Spatial Scaling Configuration */
+
+#define CICMR __REG_3(0x50000090) /* Color Management register */
+#define CICMC0 __REG_3(0x50000094) /* Color Management Coefficients 0 */
+#define CICMC1 __REG_3(0x50000098) /* Color Management Coefficients 1 */
+#define CICMC2 __REG_3(0x5000009C) /* Color Management Coefficients 2 */
+
+#define CIFR0 __REG_3(0x500000B0) /* FIFO Control register 0 */
+#define CIFR1 __REG_3(0x500000B4) /* FIFO Control register 1 */
+#define CIFSR __REG_3(0x500000C0) /* FIFO Status register */
+
+#define CIDADR0 __REG_3(0x50000240) /* DMA Descriptor Address Channel 0 register */
+#define CIDADR1 __REG_3(0x50000250) /* DMA Descriptor Address Channel 1 register */
+#define CIDADR2 __REG_3(0x50000260) /* DMA Descriptor Address Channel 2 register */
+#define CIDADR3 __REG_3(0x50000270) /* DMA Descriptor Address Channel 3 register */
+#define CITADR0 __REG_3(0x50000244) /* DMA Target Address Channel 0 register */
+#define CITADR1 __REG_3(0x50000254) /* DMA Target Address Channel 1 register */
+#define CITADR2 __REG_3(0x50000264) /* DMA Target Address Channel 2 register */
+#define CITADR3 __REG_3(0x50000274) /* DMA Target Address Channel 3 register */
+#define CISADR0 __REG_3(0x50000248) /* DMA Source Address Channel 0 register */
+#define CISADR1 __REG_3(0x50000258) /* DMA Source Address Channel 1 register */
+#define CISADR2 __REG_3(0x50000268) /* DMA Source Address Channel 2 register */
+#define CISADR3 __REG_3(0x50000278) /* DMA Source Address Channel 3 register */
+#define CICMD0 __REG_3(0x5000024C) /* DMA Command Channel 0 register*/
+#define CICMD1 __REG_3(0x5000025C) /* DMA Command Channel 1 register*/
+#define CICMD2 __REG_3(0x5000026C) /* DMA Command Channel 2 register*/
+#define CICMD3 __REG_3(0x5000027C) /* DMA Command Channel 3 register*/
+#define CIDBR0 __REG_3(0x50000220) /* DMA Branch Channel 0 register*/
+#define CIDBR1 __REG_3(0x50000224) /* DMA Branch Channel 1 register*/
+#define CIDBR2 __REG_3(0x50000228) /* DMA Branch Channel 2 register*/
+#define CIDBR3 __REG_3(0x5000022C) /* DMA Branch Channel 3 register*/
+#define CIDCSR0 __REG_3(0x50000200) /* DMA Ctrl/Status Channel 0 register*/
+#define CIDCSR1 __REG_3(0x50000204) /* DMA Ctrl/Status Channel 1 register*/
+#define CIDCSR2 __REG_3(0x50000208) /* DMA Ctrl/Status Channel 2 register*/
+#define CIDCSR3 __REG_3(0x5000020C) /* DMA Ctrl/Status Channel 3 register*/
+
+#define CICR0_DMAEN (1 << 31) /* DMA request enable */
+#define CICR0_PAR_EN (1 << 30) /* Parity enable */
+#define CICR0_SL_CAP_EN (1 << 29) /* Capture enable for slave mode */
+#define CICR0_ENB (1 << 28) /* Camera interface enable */
+#define CICR0_DIS (1 << 27) /* Camera interface disable */
+#define CICR0_SIM (0x7 << 24) /* Sensor interface mode mask */
+#define CICR0_TOM (1 << 9) /* Time-out mask */
+#define CICR0_RDAVM (1 << 8) /* Receive-data-available mask */
+#define CICR0_FEM (1 << 7) /* FIFO-empty mask */
+#define CICR0_EOLM (1 << 6) /* End-of-line mask */
+#define CICR0_PERRM (1 << 5) /* Parity-error mask */
+#define CICR0_QDM (1 << 4) /* Quick-disable mask */
+#define CICR0_CDM (1 << 3) /* Disable-done mask */
+#define CICR0_SOFM (1 << 2) /* Start-of-frame mask */
+#define CICR0_EOFM (1 << 1) /* End-of-frame mask */
+#define CICR0_FOM (1 << 0) /* FIFO-overrun mask */
+
+#define CICR1_TBIT (1 << 31) /* Transparency bit */
+#define CICR1_RGBT_CONV (0x3 << 30) /* RGBT conversion mask */
+#define CICR1_PPL (0x3f << 15) /* Pixels per line mask */
+#define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */
+#define CICR1_RGB_F (1 << 11) /* RGB format */
+#define CICR1_YCBCR_F (1 << 10) /* YCbCr format */
+#define CICR1_RGB_BPP (0x7 << 7) /* RGB bis per pixel mask */
+#define CICR1_RAW_BPP (0x3 << 5) /* Raw bis per pixel mask */
+#define CICR1_COLOR_SP (0x3 << 3) /* Color space mask */
+#define CICR1_DW (0x7 << 0) /* Data width mask */
+
+#define CICR2_BLW (0xff << 24) /* Beginning-of-line pixel clock
+ wait count mask */
+#define CICR2_ELW (0xff << 16) /* End-of-line pixel clock
+ wait count mask */
+#define CICR2_HSW (0x3f << 10) /* Horizontal sync pulse width mask */
+#define CICR2_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
+ wait count mask */
+#define CICR2_FSW (0x7 << 0) /* Frame stabilization
+ wait count mask */
+
+#define CICR3_BFW (0xff << 24) /* Beginning-of-frame line clock
+ wait count mask */
+#define CICR3_EFW (0xff << 16) /* End-of-frame line clock
+ wait count mask */
+#define CICR3_VSW (0x3f << 10) /* Vertical sync pulse width mask */
+#define CICR3_BFPW (0x3f << 3) /* Beginning-of-frame pixel clock
+ wait count mask */
+#define CICR3_LPF (0x3ff << 0) /* Lines per frame mask */
+
+#define CICR4_MCLK_DLY (0x3 << 24) /* MCLK Data Capture Delay mask */
+#define CICR4_PCLK_EN (1 << 23) /* Pixel clock enable */
+#define CICR4_PCP (1 << 22) /* Pixel clock polarity */
+#define CICR4_HSP (1 << 21) /* Horizontal sync polarity */
+#define CICR4_VSP (1 << 20) /* Vertical sync polarity */
+#define CICR4_MCLK_EN (1 << 19) /* MCLK enable */
+#define CICR4_FR_RATE (0x7 << 8) /* Frame rate mask */
+#define CICR4_DIV (0xff << 0) /* Clock divisor mask */
+
+#define CISR_FTO (1 << 15) /* FIFO time-out */
+#define CISR_RDAV_2 (1 << 14) /* Channel 2 receive data available */
+#define CISR_RDAV_1 (1 << 13) /* Channel 1 receive data available */
+#define CISR_RDAV_0 (1 << 12) /* Channel 0 receive data available */
+#define CISR_FEMPTY_2 (1 << 11) /* Channel 2 FIFO empty */
+#define CISR_FEMPTY_1 (1 << 10) /* Channel 1 FIFO empty */
+#define CISR_FEMPTY_0 (1 << 9) /* Channel 0 FIFO empty */
+#define CISR_EOL (1 << 8) /* End of line */
+#define CISR_PAR_ERR (1 << 7) /* Parity error */
+#define CISR_CQD (1 << 6) /* Camera interface quick disable */
+#define CISR_SOF (1 << 5) /* Start of frame */
+#define CISR_CDD (1 << 4) /* Camera interface disable done */
+#define CISR_EOF (1 << 3) /* End of frame */
+#define CISR_IFO_2 (1 << 2) /* FIFO overrun for Channel 2 */
+#define CISR_IFO_1 (1 << 1) /* FIFO overrun for Channel 1 */
+#define CISR_IFO_0 (1 << 0) /* FIFO overrun for Channel 0 */
+
+#define CIFR_FLVL2 (0x7f << 23) /* FIFO 2 level mask */
+#define CIFR_FLVL1 (0x7f << 16) /* FIFO 1 level mask */
+#define CIFR_FLVL0 (0xff << 8) /* FIFO 0 level mask */
+#define CIFR_THL_0 (0x3 << 4) /* Threshold Level for Channel 0 FIFO */
+#define CIFR_RESET_F (1 << 3) /* Reset input FIFOs */
+#define CIFR_FEN2 (1 << 2) /* FIFO enable for channel 2 */
+#define CIFR_FEN1 (1 << 1) /* FIFO enable for channel 1 */
+#define CIFR_FEN0 (1 << 0) /* FIFO enable for channel 0 */
+
+#endif /* CONFIG_CPU_MONAHANS */
-/* Keypad controller */
-
-#define KPC __REG(0x41500000) /* Keypad Interface Control register */
-#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */
-#define KPREC __REG(0x41500010) /* Keypad Intefcace Rotary Encoder register */
-#define KPMK __REG(0x41500018) /* Keypad Intefcace Matrix Key register */
-#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */
-#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
-#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
-#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
-#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
-#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */
-
-#define KPC_AS (0x1 << 30) /* Automatic Scan bit */
-#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */
-#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */
-#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */
-#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */
-#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */
-#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */
-#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */
-#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */
-#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */
-#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */
-#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */
-#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */
-#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */
-#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Key Debounce select */
-#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */
-#define KPC_DEE0 (0x1 << 2) /* Rotary Encoder 0 Enable */
-#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */
-#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */
-
-#define KPDK_DKP (0x1 << 31)
-#define KPDK_DK7 (0x1 << 7)
-#define KPDK_DK6 (0x1 << 6)
-#define KPDK_DK5 (0x1 << 5)
-#define KPDK_DK4 (0x1 << 4)
-#define KPDK_DK3 (0x1 << 3)
-#define KPDK_DK2 (0x1 << 2)
-#define KPDK_DK1 (0x1 << 1)
-#define KPDK_DK0 (0x1 << 0)
-
-#define KPREC_OF1 (0x1 << 31)
-#define kPREC_UF1 (0x1 << 30)
-#define KPREC_OF0 (0x1 << 15)
-#define KPREC_UF0 (0x1 << 14)
-
-#define KPMK_MKP (0x1 << 31)
-#define KPAS_SO (0x1 << 31)
-#define KPASMKPx_SO (0x1 << 31)
-
-#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */
-#define PSLR __REG(0x40F00034)
-#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */
-#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */
-#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */
-#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */
-#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */
-#define OSMR4 __REG(0x40A00080) /* */
-#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
-#define OMCR4 __REG(0x40A000C0) /* */
-
-#endif /* CONFIG_PXA27X */
-
-#endif /* _PXA_REGS_H_ */
+#endif