Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

1 files changed, 34 insertions, 0 deletions

diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 2500c10450..4aa0004fab 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -251,6 +251,8 @@ struct dm_gpio_ops {
 				int value);
 	int (*get_value)(struct udevice *dev, unsigned offset);
 	int (*set_value)(struct udevice *dev, unsigned offset, int value);
+	int (*get_open_drain)(struct udevice *dev, unsigned offset);
+	int (*set_open_drain)(struct udevice *dev, unsigned offset, int value);
 	/**
 	 * get_function() Get the GPIO function
 	 *
@@ -550,6 +552,38 @@ int dm_gpio_get_value(const struct gpio_desc *desc);
 int dm_gpio_set_value(const struct gpio_desc *desc, int value);
 
 /**
+ * dm_gpio_get_open_drain() - Check if open-drain-mode of a GPIO is active
+ *
+ * This checks if open-drain-mode for a GPIO is enabled or not. This method is
+ * optional.
+ *
+ * @desc:	GPIO description containing device, offset and flags,
+ *		previously returned by gpio_request_by_name()
+ * @return Value of open drain mode for GPIO (0 for inactive, 1 for active) or
+ *	   -ve on error
+ */
+int dm_gpio_get_open_drain(struct gpio_desc *desc);
+
+/**
+ * dm_gpio_set_open_drain() - Switch open-drain-mode of a GPIO on or off
+ *
+ * This enables or disables open-drain mode for a GPIO. This method is
+ * optional; if the driver does not support it, nothing happens when the method
+ * is called.
+ *
+ * In open-drain mode, instead of actively driving the output (Push-pull
+ * output), the GPIO's pin is connected to the collector (for a NPN transistor)
+ * or the drain (for a MOSFET) of a transistor, respectively. The pin then
+ * either forms an open circuit or a connection to ground, depending on the
+ * state of the transistor.
+ *
+ * @desc:	GPIO description containing device, offset and flags,
+ *		previously returned by gpio_request_by_name()
+ * @return 0 if OK, -ve on error
+ */
+int dm_gpio_set_open_drain(struct gpio_desc *desc, int value);
+
+/**
  * dm_gpio_set_dir() - Set the direction for a GPIO
  *
  * This sets up the direction according tot the provided flags. It will do