MPC512x: remove include/mpc512x.h

Move needed definitions (register descriptions etc.) from
include/mpc512x.h  into  include/asm-ppc/immap_512x.h.

Instead of using a #define'd register offset, use a function that
provides the PATA controller's base address.

All the rest of include/mpc512x.h are register offset definitions
which can be eliminated by proper use of C structures.

There are only a few register offsets remaining that are needed in
cpu/mpc512x/start.S; for these we provide cpu/mpc512x/asm-offsets.h
which is intended as a temporary workaround only. In a later patch
this file will be removed, too, and then auto-generated from the
respective C structs.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: John Rigby <jcrigby@gmail.com>

1 files changed, 323 insertions, 1 deletions

diff --git a/include/asm-ppc/immap_512x.h b/include/asm-ppc/immap_512x.h
index bd40c04e14..444e028885 100644
--- a/include/asm-ppc/immap_512x.h
+++ b/include/asm-ppc/immap_512x.h
@@ -25,7 +25,28 @@
 #define __IMMAP_512x__
 
 #include <asm/types.h>
+#if defined(CONFIG_E300)
+#include <asm/e300.h>
+#endif
 
+/*
+ * System reset offset (PowerPC standard)
+ */
+#define EXC_OFF_SYS_RESET	0x0100
+#define	_START_OFFSET		EXC_OFF_SYS_RESET
+
+#define SPR_5121E		0x80180000
+
+/*
+ * IMMRBAR - Internal Memory Register Base Address
+ */
+#define CONFIG_DEFAULT_IMMR	0xFF400000	/* Default IMMR base address */
+#define IMMRBAR			0x0000		/* Register offset to immr */
+#define IMMRBAR_BASE_ADDR	0xFFF00000	/* Base address mask */
+#define IMMRBAR_RES		~(IMMRBAR_BASE_ADDR)
+
+
+#ifndef __ASSEMBLY__
 typedef struct law512x {
 	u32 bar;	/* Base Addr Register */
 	u32 ar;		/* Attributes Register */
@@ -60,6 +81,8 @@ typedef struct sysconf512x {
 	u8 res5[0xf8];
 } sysconf512x_t;
 
+#define LAWBAR_BAR	0xFFFFF000	/* Base address mask */
+
 /*
  * Watch Dog Timer (WDT) Registers
  */
@@ -124,6 +147,34 @@ typedef struct reset512x {
 	u8 res1[0xDC];
 } reset512x_t;
 
+/* RSR - Reset Status Register */
+#define RSR_SWSR	0x00002000	/* software soft reset */
+#define RSR_SWHR	0x00001000	/* software hard reset */
+#define RSR_JHRS	0x00000200	/* jtag hreset */
+#define RSR_JSRS	0x00000100	/* jtag sreset status */
+#define RSR_CSHR	0x00000010	/* checkstop reset status */
+#define RSR_SWRS	0x00000008	/* software watchdog reset status */
+#define RSR_BMRS	0x00000004	/* bus monitop reset status */
+#define RSR_SRS		0x00000002	/* soft reset status */
+#define RSR_HRS		0x00000001	/* hard reset status */
+#define RSR_RES		~(RSR_SWSR | RSR_SWHR |\
+			 RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\
+			 RSR_BMRS | RSR_SRS | RSR_HRS)
+
+/* RMR - Reset Mode Register */
+#define RMR_CSRE	0x00000001	/* checkstop reset enable */
+#define RMR_CSRE_SHIFT	0
+#define RMR_RES		(~(RMR_CSRE))
+
+/* RCR - Reset Control Register */
+#define RCR_SWHR	0x00000002	/* software hard reset */
+#define RCR_SWSR	0x00000001	/* software soft reset */
+#define RCR_RES		(~(RCR_SWHR | RCR_SWSR))
+
+/* RCER - Reset Control Enable Register */
+#define RCER_CRE	0x00000001	/* software hard reset */
+#define RCER_RES	(~(RCER_CRE))
+
 /*
  * Clock Module
  */
@@ -140,6 +191,56 @@ typedef struct clk512x {
 	u8 res1[0xa8];
 } clk512x_t;
 
+/* SPMR - System PLL Mode Register */
+#define SPMR_SPMF		0x0F000000
+#define SPMR_SPMF_SHIFT		24
+#define SPMR_CPMF		0x000F0000
+#define SPMR_CPMF_SHIFT		16
+
+/* System Clock Control Register 1 commands */
+#define CLOCK_SCCR1_CFG_EN		0x80000000
+#define CLOCK_SCCR1_LPC_EN		0x40000000
+#define CLOCK_SCCR1_NFC_EN		0x20000000
+#define CLOCK_SCCR1_PATA_EN		0x10000000
+#define CLOCK_SCCR1_PSC_EN(cn)		(0x08000000 >> (cn))
+#define CLOCK_SCCR1_PSCFIFO_EN		0x00008000
+#define CLOCK_SCCR1_SATA_EN		0x00004000
+#define CLOCK_SCCR1_FEC_EN		0x00002000
+#define CLOCK_SCCR1_TPR_EN		0x00001000
+#define CLOCK_SCCR1_PCI_EN		0x00000800
+#define CLOCK_SCCR1_DDR_EN		0x00000400
+
+/* System Clock Control Register 2 commands */
+#define CLOCK_SCCR2_DIU_EN		0x80000000
+#define CLOCK_SCCR2_AXE_EN		0x40000000
+#define CLOCK_SCCR2_MEM_EN		0x20000000
+#define CLOCK_SCCR2_USB2_EN		0x10000000
+#define CLOCK_SCCR2_USB1_EN		0x08000000
+#define CLOCK_SCCR2_I2C_EN		0x04000000
+#define CLOCK_SCCR2_BDLC_EN		0x02000000
+#define CLOCK_SCCR2_SDHC_EN		0x01000000
+#define CLOCK_SCCR2_SPDIF_EN		0x00800000
+#define CLOCK_SCCR2_MBX_BUS_EN		0x00400000
+#define CLOCK_SCCR2_MBX_EN		0x00200000
+#define CLOCK_SCCR2_MBX_3D_EN		0x00100000
+#define CLOCK_SCCR2_IIM_EN		0x00080000
+
+/* SCFR1 System Clock Frequency Register 1 */
+#define SCFR1_IPS_DIV		0x3
+#define SCFR1_IPS_DIV_MASK	0x03800000
+#define SCFR1_IPS_DIV_SHIFT	23
+
+#define SCFR1_PCI_DIV		0x6
+#define SCFR1_PCI_DIV_MASK	0x00700000
+#define SCFR1_PCI_DIV_SHIFT	20
+
+/* SCFR2 System Clock Frequency Register 2 */
+#define SCFR2_SYS_DIV		0xFC000000
+#define SCFR2_SYS_DIV_SHIFT	26
+
+/* SPCR - System Priority Configuration Register */
+#define SPCR_TBEN	0x00400000	/* E300 core time base unit enable */
+
 /*
  * Power Management Control Module
  */
@@ -266,6 +367,40 @@ typedef struct pci_outbound_window {
 	u8 res2[4];
 } pot512x_t;
 
+/* POTAR - PCI Outbound Translation Address Register */
+#define POTAR_TA_MASK	0x000fffff
+
+/* POBAR - PCI Outbound Base Address Register */
+#define POBAR_BA_MASK	0x000fffff
+
+/* POCMR - PCI Outbound Comparision Mask Register */
+#define POCMR_EN	0x80000000
+#define POCMR_IO	0x40000000	/* 0-memory space 1-I/O space */
+#define POCMR_PRE	0x20000000	/* prefetch enable */
+#define POCMR_SBS	0x00100000	/* special byte swap enable */
+#define POCMR_CM_MASK	0x000fffff
+#define POCMR_CM_4G	0x00000000
+#define POCMR_CM_2G	0x00080000
+#define POCMR_CM_1G	0x000C0000
+#define POCMR_CM_512M	0x000E0000
+#define POCMR_CM_256M	0x000F0000
+#define POCMR_CM_128M	0x000F8000
+#define POCMR_CM_64M	0x000FC000
+#define POCMR_CM_32M	0x000FE000
+#define POCMR_CM_16M	0x000FF000
+#define POCMR_CM_8M	0x000FF800
+#define POCMR_CM_4M	0x000FFC00
+#define POCMR_CM_2M	0x000FFE00
+#define POCMR_CM_1M	0x000FFF00
+#define POCMR_CM_512K	0x000FFF80
+#define POCMR_CM_256K	0x000FFFC0
+#define POCMR_CM_128K	0x000FFFE0
+#define POCMR_CM_64K	0x000FFFF0
+#define POCMR_CM_32K	0x000FFFF8
+#define POCMR_CM_16K	0x000FFFFC
+#define POCMR_CM_8K	0x000FFFFE
+#define POCMR_CM_4K	0x000FFFFF
+
 /*
  * Sequencer
  */
@@ -315,6 +450,27 @@ typedef struct pcictrl512x {
 } pcictrl512x_t;
 
 
+/* PITAR - PCI Inbound Translation Address Register
+ */
+#define PITAR_TA_MASK	0x000fffff
+
+/* PIBAR - PCI Inbound Base/Extended Address Register
+ */
+#define PIBAR_MASK	0xffffffff
+#define PIEBAR_EBA_MASK	0x000fffff
+
+/* PIWAR - PCI Inbound Windows Attributes Register
+ */
+#define PIWAR_EN	0x80000000
+#define PIWAR_SBS	0x40000000
+#define PIWAR_PF	0x20000000
+#define PIWAR_RTT_MASK	0x000f0000
+#define PIWAR_RTT_NO_SNOOP 0x00040000
+#define PIWAR_RTT_SNOOP	0x00050000
+#define PIWAR_WTT_MASK	0x0000f000
+#define PIWAR_WTT_NO_SNOOP 0x00004000
+#define PIWAR_WTT_SNOOP	0x00005000
+
 /*
  * MSCAN
  */
@@ -355,13 +511,34 @@ typedef struct i2c512x_dev {
 	u8 res0[0x0C];
 } i2c512x_dev_t;
 
+/* Number of I2C buses */
+#define I2C_BUS_CNT	3
+
 typedef struct i2c512x {
-	i2c512x_dev_t dev[3];
+	i2c512x_dev_t dev[I2C_BUS_CNT];
 	volatile u32 icr;
 	volatile u32 mifr;
 	u8 res0[0x98];
 } i2c512x_t;
 
+/* I2Cn control register bits */
+#define I2C_EN		0x80
+#define I2C_IEN		0x40
+#define I2C_STA		0x20
+#define I2C_TX		0x10
+#define I2C_TXAK	0x08
+#define I2C_RSTA	0x04
+#define I2C_INIT_MASK	(I2C_EN | I2C_STA | I2C_TX | I2C_RSTA)
+
+/* I2Cn status register bits */
+#define I2C_CF		0x80
+#define I2C_AAS		0x40
+#define I2C_BB		0x20
+#define I2C_AL		0x10
+#define I2C_SRW		0x04
+#define I2C_IF		0x02
+#define I2C_RXAK	0x01
+
 /*
  * AXE
  */
@@ -653,6 +830,27 @@ typedef struct ioctrl512x {
 	u8	reserved[0x0cfc];		/* fill to 4096 bytes size */
 } ioctrl512x_t;
 
+/* Indexes in regs array */
+/* Set for DDR */
+#define IOCTRL_MUX_DDR		0x00000036
+
+/* IO pin fields */
+#define IO_PIN_FMUX(v)	((v) << 7)	/* pin function */
+#define IO_PIN_HOLD(v)	((v) << 5)	/* hold time, pci only */
+#define IO_PIN_PUD(v)	((v) << 4)	/* if PUE, 0=pull-down, 1=pull-up */
+#define IO_PIN_PUE(v)	((v) << 3)	/* pull up/down enable */
+#define IO_PIN_ST(v)	((v) << 2)	/* schmitt trigger */
+#define IO_PIN_DS(v)	((v))		/* slew rate */
+
+typedef struct iopin_t {
+	int p_offset;		/* offset from IOCTL_MEM_OFFSET */
+	int nr_pins;		/* number of pins to set this way */
+	int bit_or;		/* or in the value instead of overwrite */
+	u_long val;		/* value to write or or */
+}iopin_t;
+
+void iopin_initialize(iopin_t *,int);
+
 /*
  * IIM
  */
@@ -834,6 +1032,51 @@ typedef struct psc512x {
 #define rfdata_32	rfdata_buffer.buffer_32
 } psc512x_t;
 
+/* PSC FIFO Command values */
+#define PSC_FIFO_RESET_SLICE		0x80
+#define PSC_FIFO_ENABLE_SLICE		0x01
+
+/* PSC FIFO Controller Command values */
+#define FIFOC_ENABLE_CLOCK_GATE		0x01
+#define FIFOC_DISABLE_CLOCK_GATE	0x00
+
+/* PSC FIFO status */
+#define PSC_FIFO_EMPTY			0x01
+
+/* PSC Command values */
+#define PSC_RX_ENABLE		0x01
+#define PSC_RX_DISABLE		0x02
+#define PSC_TX_ENABLE		0x04
+#define PSC_TX_DISABLE		0x08
+#define PSC_SEL_MODE_REG_1	0x10
+#define PSC_RST_RX		0x20
+#define PSC_RST_TX		0x30
+#define PSC_RST_ERR_STAT	0x40
+#define PSC_RST_BRK_CHG_INT	0x50
+#define PSC_START_BRK		0x60
+#define PSC_STOP_BRK		0x70
+
+/* PSC status register bits */
+#define PSC_SR_CDE		0x0080
+#define PSC_SR_TXEMP		0x0800
+#define PSC_SR_OE		0x1000
+#define PSC_SR_PE		0x2000
+#define PSC_SR_FE		0x4000
+#define PSC_SR_RB		0x8000
+
+/* PSC mode fields */
+#define PSC_MODE_5_BITS		0x00
+#define PSC_MODE_6_BITS		0x01
+#define PSC_MODE_7_BITS		0x02
+#define PSC_MODE_8_BITS		0x03
+#define PSC_MODE_PAREVEN	0x00
+#define PSC_MODE_PARODD		0x04
+#define PSC_MODE_PARFORCE	0x08
+#define PSC_MODE_PARNONE	0x10
+#define PSC_MODE_ENTIMEOUT	0x20
+#define PSC_MODE_RXRTS		0x80
+#define PSC_MODE_1_STOPBIT	0x07
+
 /*
  * FIFOC
  */
@@ -847,6 +1090,76 @@ typedef struct fifoc512x {
 } fifoc512x_t;
 
 /*
+ * Centralized FIFO Controller has internal memory for all 12 PSCs FIFOs
+ *
+ * NOTE: individual PSC units are free to use whatever area (and size) of the
+ * FIFOC internal memory, so make sure memory areas for FIFO slices used by
+ * different PSCs do not overlap!
+ *
+ * Overall size of FIFOC memory is not documented in the MPC5121e RM, but
+ * tests indicate that it is 1024 words total.
+ */
+#define FIFOC_PSC0_TX_SIZE	0x0	/* number of 4-byte words for FIFO slice */
+#define FIFOC_PSC0_TX_ADDR	0x0
+#define FIFOC_PSC0_RX_SIZE	0x0
+#define FIFOC_PSC0_RX_ADDR	0x0
+
+#define FIFOC_PSC1_TX_SIZE	0x0
+#define FIFOC_PSC1_TX_ADDR	0x0
+#define FIFOC_PSC1_RX_SIZE	0x0
+#define FIFOC_PSC1_RX_ADDR	0x0
+
+#define FIFOC_PSC2_TX_SIZE	0x0
+#define FIFOC_PSC2_TX_ADDR	0x0
+#define FIFOC_PSC2_RX_SIZE	0x0
+#define FIFOC_PSC2_RX_ADDR	0x0
+
+#define FIFOC_PSC3_TX_SIZE	0x04
+#define FIFOC_PSC3_TX_ADDR	0x0
+#define FIFOC_PSC3_RX_SIZE	0x04
+#define FIFOC_PSC3_RX_ADDR	0x10
+
+#define FIFOC_PSC4_TX_SIZE	0x0
+#define FIFOC_PSC4_TX_ADDR	0x0
+#define FIFOC_PSC4_RX_SIZE	0x0
+#define FIFOC_PSC4_RX_ADDR	0x0
+
+#define FIFOC_PSC5_TX_SIZE	0x0
+#define FIFOC_PSC5_TX_ADDR	0x0
+#define FIFOC_PSC5_RX_SIZE	0x0
+#define FIFOC_PSC5_RX_ADDR	0x0
+
+#define FIFOC_PSC6_TX_SIZE	0x0
+#define FIFOC_PSC6_TX_ADDR	0x0
+#define FIFOC_PSC6_RX_SIZE	0x0
+#define FIFOC_PSC6_RX_ADDR	0x0
+
+#define FIFOC_PSC7_TX_SIZE	0x0
+#define FIFOC_PSC7_TX_ADDR	0x0
+#define FIFOC_PSC7_RX_SIZE	0x0
+#define FIFOC_PSC7_RX_ADDR	0x0
+
+#define FIFOC_PSC8_TX_SIZE	0x0
+#define FIFOC_PSC8_TX_ADDR	0x0
+#define FIFOC_PSC8_RX_SIZE	0x0
+#define FIFOC_PSC8_RX_ADDR	0x0
+
+#define FIFOC_PSC9_TX_SIZE	0x0
+#define FIFOC_PSC9_TX_ADDR	0x0
+#define FIFOC_PSC9_RX_SIZE	0x0
+#define FIFOC_PSC9_RX_ADDR	0x0
+
+#define FIFOC_PSC10_TX_SIZE	0x0
+#define FIFOC_PSC10_TX_ADDR	0x0
+#define FIFOC_PSC10_RX_SIZE	0x0
+#define FIFOC_PSC10_RX_ADDR	0x0
+
+#define FIFOC_PSC11_TX_SIZE	0x0
+#define FIFOC_PSC11_TX_ADDR	0x0
+#define FIFOC_PSC11_RX_SIZE	0x0
+#define FIFOC_PSC11_RX_ADDR	0x0
+
+/*
  * SATA
  */
 typedef struct sata512x {
@@ -903,4 +1216,13 @@ typedef struct immap {
 	sata512x_t		sata;		/* Serial ATA */
 	u8			res13[0xde000];
 } immap_t;
+
+/* provide interface to get PATA base address */
+static inline u32 get_pata_base (void)
+{
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	return (u32)(&im->pata);
+}
+#endif	/* __ASSEMBLY__ */
+
 #endif /* __IMMAP_512x__ */