Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

1 files changed, 0 insertions, 443 deletions

diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h
deleted file mode 100644
index 78757ecced..0000000000
--- a/include/configs/ATUM8548.h
+++ /dev/null
@@ -1,443 +0,0 @@
-/*
- * Copyright 2007
- * Robert Lazarski, Instituto Atlantico, robertlazarski@gmail.com
- *
- * Copyright 2004, 2007 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * atum8548 board configuration file
- *
- * Please refer to doc/README.atum8548 for more info.
- *
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* Debug Options, Disable in production
-#define ET_DEBUG		1
-#define CONFIG_PANIC_HANG	1
-#define DEBUG			1
-*/
-
-/* CPLD Configuration Options */
-#define MPC85xx_ATUM_CLKOCR            0x80000002
-
-/* High Level Configuration Options */
-#define CONFIG_BOOKE		1	/* BOOKE */
-#define CONFIG_E500		1	/* BOOKE e500 family */
-#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48 */
-#define CONFIG_MPC8548		1	/* MPC8548 specific */
-
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xfff80000
-#endif
-
-#define CONFIG_PCI		1	/* enable any pci type devices */
-#define CONFIG_PCI1		1	/* PCI controller 1 */
-#define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCI2             1	/* PCI controller 2 */
-#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
-
-#define CONFIG_TSEC_ENET	1	/* tsec ethernet support */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
-
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
-
-#define CONFIG_SYS_CLK_FREQ	33000000
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE			/* toggle L2 cache */
-#define CONFIG_BTB			/* toggle branch predition */
-
-/*
- * Only possible on E500 Version 2 or newer cores.
- */
-#define CONFIG_ENABLE_36BIT_PHYS	1
-
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-
-#define CONFIG_CMD_SDRAM		1	/* SDRAM DIMM SPD info printout */
-#define CONFIG_ENABLE_36BIT_PHYS	1
-#undef	CONFIG_SYS_DRAM_TEST
-#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00400000
-
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
-#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
-#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
-
-#define PCI_SPEED		33333000        /* CPLD currenlty does not have PCI setup info */
-
-/* DDR Setup */
-#define CONFIG_FSL_DDR2
-#undef CONFIG_FSL_DDR_INTERACTIVE
-#define CONFIG_DDR_ECC			/* only for ECC DDR module */
-#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
-#define CONFIG_DDR_SPD
-
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
-#define CONFIG_MEM_INIT_VALUE	0xDeadBeef
-
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_NUM_DDR_CONTROLLERS	1
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	2
-
-/* I2C addresses of SPD EEPROMs */
-#define SPD_EEPROM_ADDRESS	0x51	/* CTLR 0 DIMM 0 */
-
-/* Manually set up DDR parameters */
-#define CONFIG_SYS_SDRAM_SIZE	1024		/* DDR is 1024MB */
-#define CONFIG_SYS_DDR_CS0_BNDS	0x0000000f	/* 0-1024 */
-#define CONFIG_SYS_DDR_CS0_CONFIG	0x80000102
-#define CONFIG_SYS_DDR_TIMING_0	0x00260802
-#define CONFIG_SYS_DDR_TIMING_1	0x38355322
-#define CONFIG_SYS_DDR_TIMING_2	0x039048c7
-#define CONFIG_SYS_DDR_CONTROL	0xc2000000	/* unbuffered,no DYN_PWR */
-#define CONFIG_SYS_DDR_MODE	0x00000432
-#define CONFIG_SYS_DDR_INTERVAL	0x05150100
-#define DDR_SDRAM_CFG	0x43000000
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-/*
- * Local Bus Definitions
- */
-
-/*
- * FLASH on the Local Bus
- * based on flash chip S29GL01GP
- * One bank, 128M, using the CFI driver.
- * Boot from BR0 bank at 0xf800_0000
- *
- * BR0:
- *    Base address 0 = 0xF8000000 = BR0[0:16] = 1111 1000 0000 0000 0
- *    Port Size = 16 bits = BRx[19:20] = 10
- *    Use GPCM = BRx[24:26] = 000
- *    Valid = BRx[31] = 1
- *
- * 0    4    8    12   16   20   24   28
- * 1111 1000 0000 0000 0001 0000 0000 0001 = f8001001    BR0
- *
- * OR0:
- *    Addr Mask = 128M = ORx[0:16] = 1111 1000 0000 0000 0
- *    Reserved ORx[17:18] = 00
- *    CSNT = ORx[20] = 1
- *    ACS = half cycle delay = ORx[21:22] = 11
- *    SCY = 6 = ORx[24:27] = 0110
- *    TRLX = use relaxed timing = ORx[29] = 1
- *    EAD = use external address latch delay = OR[31] = 1
- *
- * 0    4    8    12   16   20   24   28
- * 1111 1000 0000 0000 0000 1110 0110 0101 = f8000E65    ORx
- */
-
-#define CONFIG_SYS_BOOT_BLOCK		0xf8000000	/* boot TLB block */
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_BOOT_BLOCK	/* start of FLASH 128M */
-
-#define CONFIG_SYS_BR0_PRELIM		0xf8001001
-
-#define	CONFIG_SYS_OR0_PRELIM		0xf8000E65
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	1024		/* sectors per device */
-#undef	CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	512000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	8000	/* Flash Write Timeout (ms) */
-
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-
-#define CONFIG_FLASH_CFI_DRIVER    1
-#define CONFIG_SYS_FLASH_CFI           1
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-/*
- * Flash on the LocalBus
- */
-#define CONFIG_SYS_LBC_CACHE_BASE	0xf0000000	/* Localbus cacheable	 */
-
-/* Memory */
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x4000		/* Size of used area in RAM */
-
-#define CONFIG_SYS_INIT_L2_ADDR	0xf8f80000	/* relocate boot L2SRAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
-
-/* Serial Port */
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_OF_BOARD_SETUP		1
-
-/*
- * I2C
- */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-#define CONFIG_SYS_PCI_PHYS		0x80000000	/* 1G PCI TLB */
-
-#define CONFIG_SYS_PCI1_MEM_BUS		0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BUS
-#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI1_IO_BUS	0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
-#define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
-
-#ifdef CONFIG_PCI2
-#define CONFIG_SYS_PCI2_MEM_BUS		0xC0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BUS
-#define CONFIG_SYS_PCI2_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI2_IO_BUS	0x00000000
-#define CONFIG_SYS_PCI2_IO_PHYS	0xe2800000
-#define CONFIG_SYS_PCI2_IO_SIZE	0x00100000	/* 1M */
-#endif
-
-#ifdef CONFIG_PCIE1
-#define CONFIG_SYS_PCIE1_MEM_BUS	0xa0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BUS
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xe3000000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00100000	/*   1M */
-#endif
-
-
-#if !defined(CONFIG_PCI_PNP)
-    #define PCI_ENET0_IOADDR	0xe0000000
-    #define PCI_ENET0_MEMADDR	0xe0000000
-    #define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
-#endif
-
-#if defined(CONFIG_PCI)
-
-#define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-
-#undef CONFIG_EEPRO100
-#undef CONFIG_TULIP
-
-#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-
-#endif	/* CONFIG_PCI */
-
-#if defined(CONFIG_TSEC_ENET)
-
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI	1
-#endif
-
-#define CONFIG_MII		1	/* MII PHY management */
-#define CONFIG_TSEC1	1
-#define CONFIG_TSEC1_NAME	"eTSEC0"
-#define CONFIG_TSEC2	1
-#define CONFIG_TSEC2_NAME	"eTSEC1"
-#define CONFIG_TSEC3	1
-#define CONFIG_TSEC3_NAME	"eTSEC2"
-#define CONFIG_TSEC4	1
-#define CONFIG_TSEC4_NAME	"eTSEC3"
-#undef CONFIG_MPC85XX_FEC
-
-#define TSEC1_PHY_ADDR		0
-#define TSEC2_PHY_ADDR		1
-#define TSEC3_PHY_ADDR		2
-#define TSEC4_PHY_ADDR		3
-
-#define TSEC1_PHYIDX		0
-#define TSEC2_PHYIDX		0
-#define TSEC3_PHYIDX		0
-#define TSEC4_PHYIDX		0
-#define TSEC1_FLAGS		TSEC_GIGABIT
-#define TSEC2_FLAGS		TSEC_GIGABIT
-#define TSEC3_FLAGS		TSEC_GIGABIT
-#define TSEC4_FLAGS		TSEC_GIGABIT
-
-/* Options are: eTSEC[0-3] */
-#define CONFIG_ETHPRIME		"eTSEC2"
-#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
-#endif	/* CONFIG_TSEC_ENET */
-
-/*
- * Environment
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
-#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-#define CONFIG_ENV_SIZE		0x2000
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
-/*
- * Environment Configuration
- */
-
-/* The mac addresses for all ethernet interface */
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH0
-#define CONFIG_ETHADDR	 00:E0:0C:00:00:FD
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR	 00:E0:0C:00:01:FD
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR	 00:E0:0C:00:02:FD
-#define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR	 00:E0:0C:00:03:FD
-#endif
-
-#define CONFIG_IPADDR	 10.101.43.142
-
-#define CONFIG_HOSTNAME	 atum
-#define CONFIG_ROOTPATH	 /nfsroot
-#define CONFIG_BOOTFILE	 /tftpboot/uImage.atum
-#define CONFIG_UBOOTPATH	/tftpboot/uboot.bin	/* TFTP server */
-
-#define CONFIG_SERVERIP	 10.101.43.10
-#define CONFIG_GATEWAYIP 10.101.45.1
-#define CONFIG_NETMASK	 255.255.248.0
-
-#define CONFIG_LOADADDR	1000000	/*default location for tftp and bootm*/
-
-#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
-#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs*/
-
-#define CONFIG_BAUDRATE	115200
-
-#define CONFIG_NFSBOOTCOMMAND						\
-   "setenv bootargs root=/dev/nfs rw "					\
-      "nfsroot=$serverip:$rootpath "					\
-      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-      "console=$consoledev,$baudrate $othbootargs;"	                \
-   "tftp $loadaddr $bootfile;"						\
-   "tftp $dtbaddr $dtbfile;"						\
-   "bootm $loadaddr - $dtbaddr"
-
-
-#define CONFIG_RAMBOOTCOMMAND \
-   "setenv bootargs root=/dev/ram rw "					\
-      "console=$consoledev,$baudrate $othbootargs;"			\
-   "tftp $ramdiskaddr $ramdiskfile;"					\
-   "tftp $loadaddr $bootfile;"						\
-   "tftp $dtbaddr $dtbfile;"						\
-   "bootm $loadaddr $ramdiskaddr $dtbaddr"
-
-#define CONFIG_BOOTCOMMAND	CONFIG_NFSBOOTCOMMAND
-
-#endif	/* __CONFIG_H */