m68k: Remove M5271EVB and idmr board support

CONFIG_SYS_HZ must be always 1000, but M5271EVB.h defines it
as 1000000 and idmr.h defines it as (50000000 / 64).

When compiling these two boards, a warning message is displayed:

  time.c:14:2: warning: #warning "CONFIG_SYS_HZ must be 1000
  and should not be defined by platforms" [-Wcpp]

There are no board maintainers for them so this commit just
deletes them.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Jason Jin <Jason.jin@freescale.com>

1 files changed, 0 insertions, 234 deletions

diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
deleted file mode 100644
index a9531b0bf3..0000000000
--- a/include/configs/M5271EVB.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * Configuation settings for the Freescale M5271EVB
- *
- * Based on MC5272C3 and r5200 board configs
- * (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com>
- * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef _M5271EVB_H
-#define _M5271EVB_H
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_MCF52x2		/* define processor family */
-#define CONFIG_M5271		/* define processor type */
-#define CONFIG_M5271EVB		/* define board type */
-
-#define CONFIG_MCFTMR
-
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT		(0)
-#define CONFIG_BAUDRATE		115200
-
-#undef CONFIG_WATCHDOG		/* disable watchdog */
-
-/* Configuration for environment
- * Environment is embedded in u-boot in the second sector of the flash
- */
-#ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_ENV_OFFSET		0x4000
-#else
-#define CONFIG_ENV_ADDR		0xffe04000
-#endif
-#define CONFIG_ENV_SECT_SIZE	0x2000
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define	CONFIG_SYS_USE_PPCENV			/* Environment embedded in sect .ppcenv */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-
-#undef CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMDLINE_EDITING	1 /* enables command line history */
-#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
-
-#define CONFIG_MCFFEC
-#ifdef CONFIG_MCFFEC
-#	define CONFIG_MII		1
-#	define CONFIG_MII_INIT		1
-#	define CONFIG_SYS_DISCOVER_PHY
-#	define CONFIG_SYS_RX_ETH_BUFFER	8
-#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-
-#	define CONFIG_SYS_FEC0_PINMUX		0
-#	define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
-#	define MCFFEC_TOUT_LOOP		50000
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-#	ifndef CONFIG_SYS_DISCOVER_PHY
-#		define FECDUPLEX	FULL
-#		define FECSPEED		_100BASET
-#	else
-#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#		endif
-#	endif			/* CONFIG_SYS_DISCOVER_PHY */
-#endif
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	80000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x00000300
-#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
-
-#define CONFIG_BOOTDELAY	1	/* autoboot after 1 seconds */
-#define CONFIG_BOOTFILE		"u-boot.bin"
-#ifdef CONFIG_MCFFEC
-#	define CONFIG_NET_RETRY_COUNT	5
-#	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
-#	define CONFIG_IPADDR	192.162.1.2
-#	define CONFIG_NETMASK	255.255.255.0
-#	define CONFIG_SERVERIP	192.162.1.1
-#	define CONFIG_GATEWAYIP	192.162.1.1
-#	define CONFIG_OVERWRITE_ETHADDR_ONCE
-#endif				/* FEC_ENET */
-
-#define CONFIG_HOSTNAME		M5271EVB
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"netdev=eth0\0"				\
-	"loadaddr=10000\0"			\
-	"uboot=u-boot.bin\0"		\
-	"load=tftp $loadaddr $uboot\0"	\
-	"upd=run load; run prog\0"		\
-	"prog=prot off ffe00000 ffe3ffff;"	\
-	"era ffe00000 ffe3ffff;"		\
-	"cp.b $loadaddr ffe00000 $filesize;"	\
-	"save\0"				\
-	""
-
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size      */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size      */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_LOAD_ADDR		0x00100000
-
-#define CONFIG_SYS_MEMTEST_START	0x400
-#define CONFIG_SYS_MEMTEST_END		0x380000
-
-#define CONFIG_SYS_HZ			1000000
-
-/* Clock configuration
- * The external oscillator is a 25.000 MHz
- * CONFIG_SYS_CLK for ColdFire V2 sets cpu_clk (not bus_clk)
- * bus_clk = (cpu_clk/2) (fixed ratio)
- *
- * If CONFIG_SYS_CLK is changed. the CONFIG_SYS_MCF_SYNCR must be updated to
- * match the new clock speed. Max cpu_clk is 150 MHz.
- */
-#define CONFIG_SYS_CLK			100000000
-#define CONFIG_SYS_MCF_SYNCR 	(MCF_SYNCR_MFD_4X | MCF_SYNCR_RFD_DIV1)
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-#define CONFIG_SYS_MBAR		0x40000000	/* Register Base Addrs */
-
-/*
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000	/* Size of used area in internal SRAM    */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_SDRAM_SIZE		16	/* SDRAM size in MB */
-#define CONFIG_SYS_FLASH_BASE		0xffe00000
-
-#ifdef	CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE	0x20000
-#else
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		0x40000
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
-#define CONFIG_SYS_BOOTPARAMS_LEN	(64*1024)
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization ??
- */
-#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-
-/* FLASH organization */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks           */
-#define CONFIG_SYS_MAX_FLASH_SECT	11	/* max number of sectors on one chip    */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	1000
-
-#define CONFIG_SYS_FLASH_CFI		1
-#define CONFIG_FLASH_CFI_DRIVER	1
-#define CONFIG_SYS_FLASH_SIZE		0x200000
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE	16
-
-#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV | CF_CACR_INVI)
-#define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
-					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
-					 CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CINV | \
-					 CF_CACR_DISD | CF_CACR_INVI | \
-					 CF_CACR_CEIB | CF_CACR_DCM | \
-					 CF_CACR_EUSP)
-
-/* Chip Select 0  : Boot Flash */
-#define CONFIG_SYS_CS0_BASE	0xFFE00000
-#define CONFIG_SYS_CS0_MASK	0x001F0001
-#define CONFIG_SYS_CS0_CTRL	0x00001980
-
-/* Chip Select 1 : External SRAM */
-#define CONFIG_SYS_CS1_BASE	0x30000000
-#define CONFIG_SYS_CS1_MASK	0x00070001
-#define CONFIG_SYS_CS1_CTRL	0x00001900
-
-#endif				/* _M5271EVB_H */