mpc83xx: Add MPC8360EMDS basic board support

Add support for the Freescale MPC8360EMDS board.
Includes DDR, DUART, Local Bus, PCI.

1 files changed, 585 insertions, 0 deletions

diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
new file mode 100644
index 0000000000..0ae60618ec
--- /dev/null
+++ b/include/configs/MPC8360EMDS.h
@@ -0,0 +1,585 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1 /* E300 family */
+#define CONFIG_QE		1 /* Has QE */
+#define CONFIG_MPC83XX		1 /* MPC83XX family */
+#define CONFIG_MPC8360		1 /* MPC8360 CPU specific */
+#define CONFIG_MPC8360EMDS	1 /* MPC8360EMDS board specific */
+
+/*
+ * System Clock Setup
+ */
+#ifdef CONFIG_PCISLAVE
+#define CONFIG_83XX_PCICLK	66000000 /* in HZ */
+#else
+#define CONFIG_83XX_CLKIN	66000000 /* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ	66000000
+#endif
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN_4X1 |\
+	HRCWL_VCO_1X2 |\
+	HRCWL_CE_PLL_VCO_DIV_4 |\
+	HRCWL_CE_PLL_DIV_1X1 |\
+	HRCWL_CE_TO_PLL_1X6 |\
+	HRCWL_CORE_TO_CSB_2X1)
+
+#ifdef CONFIG_PCISLAVE
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_AGENT |\
+	HRCWH_PCI1_ARBITER_DISABLE |\
+	HRCWH_PCICKDRV_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0XFFF00100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT)
+#else
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCICKDRV_ENABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT)
+#endif
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRH		0x00000000
+#define CFG_SICRL		0x40000000
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMRBAR		0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE		0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE		CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
+
+#undef	CONFIG_DDR_ECC		/* only for ECC DDR module */
+#define CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
+
+#define CONFIG_SPD_EEPROM	/* Use SPD EEPROM for DDR setup */
+#if defined(CONFIG_SPD_EEPROM)
+/*
+ * Determine DDR configuration from I2C interface.
+ */
+#define SPD_EEPROM_ADDRESS	0x52 /* DDR SODIMM */
+#else
+/*
+ * Manually set up DDR parameters
+ */
+#define CFG_DDR_SIZE		256 /* MB */
+#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
+#define CFG_DDR_TIMING_1	0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */
+#define CFG_DDR_TIMING_2	0x00000800 /* may need tuning */
+#define CFG_DDR_CONTROL 	0x42008000 /* Self refresh,2T timing */
+#define CFG_DDR_MODE		0x20000162 /* DLL,normal,seq,4/2.5 */
+#define CFG_DDR_INTERVAL	0x045b0100 /* page mode */
+#endif
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST		/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00000000 /* memtest region */
+#define CFG_MEMTEST_END		0x00100000
+
+/*
+ * The reserved memory
+ */
+
+#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END	0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE	0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR		0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
+#define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
+#define CFG_FLASH_SIZE		16 /* FLASH size is 16M */
+
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
+
+#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | /* Flash Base address */ \
+			(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
+			BR_V)	/* valid */
+#define CFG_OR0_PRELIM		0xfe006ff7 /* 16MB Flash size */
+
+#define CFG_MAX_FLASH_BANKS	1 /* number of banks */
+#define CFG_MAX_FLASH_SECT	128 /* sectors per device */
+
+#undef	CFG_FLASH_CHECKSUM
+
+/*
+ * BCSR on the Local Bus
+ */
+#define CFG_BCSR		0xF8000000
+#define CFG_LBLAWBAR1_PRELIM	CFG_BCSR /* Access window base at BCSR base */
+#define CFG_LBLAWAR1_PRELIM	0x8000000E /* Access window size 32K */
+
+#define CFG_BR1_PRELIM		(CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */
+#define CFG_OR1_PRELIM		0xFFFFE9f7 /* length 32K */
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+#define CFG_LB_SDRAM		/* if board has SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+#define CFG_LBLAWBAR2_PRELIM	CFG_LBC_SDRAM_BASE
+#define CFG_LBLAWAR2_PRELIM	0x80000019 /* 64MB */
+
+/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM	0xf0001861 /*Port size=32bit, MSEL=SDRAM */
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ *    64MB mask for AM, OR2[0:7] = 1111 1100
+ *		   XAM, OR2[17:18] = 11
+ *    9 columns OR2[19-21] = 010
+ *    13 rows   OR2[23-25] = 100
+ *    EAD set for extra time OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
+#define CFG_OR2_PRELIM	0xfc006901
+
+#define CFG_LBC_LSRT	0x32000000 /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR	0x20000000 /* LB refresh timer prescal, 266MHz/32 */
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON	0x0063b723
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_NORMAL)
+
+#endif
+
+/*
+ * Windows to access PIB via local bus
+ */
+#define CFG_LBLAWBAR3_PRELIM	0xf8008000 /* windows base 0xf8008000 */
+#define CFG_LBLAWAR3_PRELIM	0x8000000f /* windows size 64KB */
+
+/*
+ * CS4 on Local Bus, to PIB
+ */
+#define CFG_BR4_PRELIM	0xf8008801 /* CS4 base address at 0xf8008000 */
+#define CFG_OR4_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
+
+/*
+ * CS5 on Local Bus, to PIB
+ */
+#define CFG_BR5_PRELIM	0xf8010801 /* CS5 base address at 0xf8010000 */
+#define CFG_OR5_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_IMMRBAR+0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define CONFIG_HARD_I2C		/* I2C with hardware support */
+#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CFG_I2C_SPEED	0x3F	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE	0x7F
+#define CFG_I2C_NOPROBES	{0x52} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET	0x3000
+#define CFG_I2C2_OFFSET	0x3100
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI_MEM_BASE	0x80000000
+#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
+#define CFG_PCI_MEM_SIZE	0x10000000 /* 256M */
+#define CFG_PCI_MMIO_BASE	0x90000000
+#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
+#define CFG_PCI_MMIO_SIZE	0x10000000 /* 256M */
+#define CFG_PCI_IO_BASE		0xE0300000
+#define CFG_PCI_IO_PHYS		0xE0300000
+#define CFG_PCI_IO_SIZE		0x100000 /* 1M */
+
+#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
+#define CFG_PCI_SLV_MEM_BUS	0x00000000
+#define CFG_PCI_SLV_MEM_SIZE	0x80000000
+
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */
+
+#endif	/* CONFIG_PCI */
+
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+/*
+ * Environment
+ */
+
+#ifndef CFG_RAMBOOT
+	#define CFG_ENV_IS_IN_FLASH	1
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+	#define CFG_ENV_SIZE		0x2000
+#else
+	#define CFG_NO_FLASH		1	/* Flash is not usable now */
+	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+	#define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+                               	| CFG_CMD_PCI \
+                              	| CFG_CMD_I2C) \
+				& \
+				~(CFG_CMD_ENV \
+				| CFG_CMD_LOADS))
+#else
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_I2C) \
+				& \
+				~(CFG_CMD_ENV \
+				| CFG_CMD_LOADS))
+#endif
+#else
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PCI \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_I2C)
+#else
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_I2C  )
+#endif
+#endif
+
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG		/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		/* undef to save memory */
+#define CFG_LOAD_ADDR		0x2000000 /* default load address */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+	#define CFG_CBSIZE	1024 /* Console I/O Buffer Size */
+#else
+	#define CFG_CBSIZE	256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT		0x000000000
+#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2		HID2_HBE
+
+/*
+ * Cache Config
+ */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5 /*log base 2 of the above value */
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+
+/* IMMRBAR & PCI IO: cache-inhibit and guarded */
+#define CFG_IBAT1L	(CFG_IMMRBAR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT1U	(CFG_IMMRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+
+/* BCSR: cache-inhibit and guarded */
+#define CFG_IBAT2L	(CFG_BCSR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U	(CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT3U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U	CFG_IBAT3U
+
+/* Local bus SDRAM: cacheable */
+#define CFG_IBAT4L	(CFG_LBC_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT4U	(CFG_LBC_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CFG_DBAT4L	CFG_IBAT4L
+#define CFG_DBAT4U	CFG_IBAT4U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#else
+#define CFG_IBAT6L	(0)
+#define CFG_IBAT6U	(0)
+#define CFG_IBAT7L	(0)
+#define CFG_IBAT7U	(0)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_UEC_ETH)
+#define CONFIG_ETHADDR	00:04:9f:ef:01:01
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR	00:04:9f:ef:01:02
+#endif
+
+#define CONFIG_BAUDRATE	115200
+
+#define CONFIG_LOADADDR	200000	/* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6 	/* -1 disables auto-boot */
+#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define	CONFIG_EXTRA_ENV_SETTINGS		                        \
+   "netdev=eth0\0"                                                      \
+   "consoledev=ttyS0\0"                                                 \
+   "ramdiskaddr=400000\0"			                        \
+   "ramdiskfile=ramfs.83xx\0"						\
+
+#define CONFIG_NFSBOOTCOMMAND	                                        \
+   "setenv bootargs root=/dev/nfs rw "                                  \
+   "nfsroot=$serverip:$rootpath "                                       \
+   "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "    \
+   "console=$consoledev,$baudrate $othbootargs;"                        \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+   "setenv bootargs root=/dev/ram rw "                                  \
+   "console=$consoledev,$baudrate $othbootargs;"                        \
+   "tftp $ramdiskaddr $ramdiskfile;"                                    \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr $ramdiskaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */