Merge branch 'master' of git://git.denx.de/u-boot

1 files changed, 153 insertions, 158 deletions

diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index 43e95320cd..c598d00cf0 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -12,7 +12,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -21,16 +21,11 @@
  * MA 02111-1307 USA
  */
 
-/*
- * board/config.h - configuration options, board specific
- */
-
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 /*
  * High Level Configuration Options
- * (easy to change)
  */
 
 #define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
@@ -45,13 +40,22 @@
 #define CONFIG_BAUDRATE		9600
 #define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
 
-#undef	CONFIG_BOOTARGS
-#undef	CONFIG_BOOTCOMMAND
+/* Only interrupt boot if space is pressed. */
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT	\
+	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
+#undef CONFIG_AUTOBOOT_DELAY_STR
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+#undef CONFIG_BOOTARGS
+#undef CONFIG_BOOTCOMMAND
 
-#define CONFIG_PREBOOT                  /* enable preboot variable      */
+#define CONFIG_PREBOOT			/* enable preboot variable	*/
+
+#define CFG_BOOTM_LEN		0x1000000 /* support booting of huge images */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1	/* allow baudrate change	*/
 
 #define CONFIG_NET_MULTI	1
 #undef  CONFIG_HAS_ETH1
@@ -59,11 +63,8 @@
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
-#define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
-#define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
-
-#define CONFIG_NETCONSOLE		/* include NetConsole support	*/
-
+#define CONFIG_LXT971_NO_SLEEP	1	/* disable sleep mode in LXT971	*/
+#define CONFIG_RESET_PHY_R	1	/* use reset_phy()		*/
 
 /*
  * BOOTP options
@@ -73,7 +74,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
@@ -91,249 +91,241 @@
 #define CONFIG_CMD_UNIVERSE
 #define CONFIG_CMD_EEPROM
 
-
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
 
-#define CONFIG_RTC_MC146818             /* DS1685 is MC146818 compatible*/
-#define CONFIG_SYS_RTC_REG_BASE_ADDR	 0xF0000500 /* RTC Base Address         */
+#define CONFIG_RTC_MC146818		/* DS1685 is MC146818 compatible */
+#define CONFIG_SYS_RTC_REG_BASE_ADDR	0xF0000500 /* RTC Base Address */
 
 #define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CONFIG_SYS_LONGHELP			/* undef to save memory */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
 
-#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
-#ifdef	CONFIG_SYS_HUSH_PARSER
+#undef CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser */
+#ifdef CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #endif
 
 #if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CONFIG_SYS_CBSIZE	512		/* Console I/O Buffer Size */
 #endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Argument Buffer Sz */
 
-#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device	*/
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device */
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console info */
 
-#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_AUTO_COMPLETE		1       /* add autocompletion support */
 
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM */
 
-#undef	CONFIG_SYS_EXT_SERIAL_CLOCK	       /* no external serial clock used */
-#define CONFIG_SYS_BASE_BAUD	    691200
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK		/* no external serial clock */
+#define CONFIG_SYS_BASE_BAUD	806400
 
 /* The following table includes the supported baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	\
-	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
-	 57600, 115200, 230400, 460800, 921600 }
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
 #define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
-#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+#define CONFIG_SYS_EXTBDINFO	1	/* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1 ms ticks */
 
-#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
+#define CONFIG_LOOPW		1	/* enable loopw command */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-#define CONFIG_SYS_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+#define CONFIG_SYS_RX_ETH_BUFFER	16
 
-/*-----------------------------------------------------------------------
+/*
  * PCI stuff
- *-----------------------------------------------------------------------
  */
-#define PCI_HOST_ADAPTER 0              /* configure as pci adapter     */
-#define PCI_HOST_FORCE  1               /* configure as pci host        */
-#define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
+#define PCI_HOST_ADAPTER	0	/* configure as pci adapter	*/
+#define PCI_HOST_FORCE		1	/* configure as pci host	*/
+#define PCI_HOST_AUTO		2	/* detected via arbiter enable	*/
 
-#define CONFIG_PCI			/* include pci support	        */
-#define CONFIG_PCI_HOST	PCI_HOST_AUTO   /* select pci host function     */
-#define CONFIG_PCI_PNP			/* do pci plug-and-play         */
-					/* resource configuration       */
+#define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_HOST	PCI_HOST_AUTO   /* select pci host function	*/
+#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
+					/* resource configuration	*/
 
-#define CONFIG_PCI_SCAN_SHOW            /* print pci devices @ startup  */
+#define CONFIG_PCI_SCAN_SHOW		/* print pci devices @ startup	*/
 
-#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1	/* don't skip host bridge config */
 
-#define CONFIG_PCI_BOOTDELAY    0       /* enable pci bootdelay variable*/
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh      */
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408  /* PCI Device ID: Non-Monarch */
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH 0x0409     /* PCI Device ID: Monarch */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE  /* PCI Vendor ID: esd gmbh */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408 /* PCI Device ID */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH 0x0409 /* PCI Device ID */
 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID pmc405_pci_subsys_deviceid()
 
-#define CONFIG_SYS_PCI_CLASSCODE       0x0b20  /* PCI Class Code: Processor/PPC*/
-
-#define CONFIG_SYS_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram               */
-#define CONFIG_SYS_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */
-#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
-#if 1
-#define CONFIG_SYS_PCI_PTM2LA	0xef000000	/* point to internal regs       */
-#define CONFIG_SYS_PCI_PTM2MS  0xff000001      /* 16MB, enable                 */
-#define CONFIG_SYS_PCI_PTM2PCI 0x00000000      /* Host: use this pci address   */
-#else /* old mapping */
-#define CONFIG_SYS_PCI_PTM2LA  0xffc00000      /* point to flash               */
-#define CONFIG_SYS_PCI_PTM2MS  0xffc00001      /* 4MB, enable                  */
-#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
-#endif
-/*-----------------------------------------------------------------------
+#define CONFIG_SYS_PCI_CLASSCODE       0x0b20 /* Processor/PPC */
+
+#define CONFIG_SYS_PCI_PTM1LA  (bd->bi_memstart) /* point to sdram	*/
+#define CONFIG_SYS_PCI_PTM1MS  (~(bd->bi_memsize - 1) | 1) /* memsize, enable */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000	/* Host: use this pci address */
+#define CONFIG_SYS_PCI_PTM2LA  0xef000000	/* point to internal regs */
+#define CONFIG_SYS_PCI_PTM2MS  0xff000001	/* 16MB, enable */
+#define CONFIG_SYS_PCI_PTM2PCI 0x00000000	/* Host: use this pci address */
+
+/*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_MONITOR_BASE	0xFFFC0000
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(~(TEXT_BASE) + 1)
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024) /* 128 kB for malloc() */
+
+#define CONFIG_PRAM			0 /* use pram variable to overwrite */
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ	(8 << 20) /* Initial Memory map for Linux */
 
-/*-----------------------------------------------------------------------
+/*
  * FLASH organization
  */
 #define CONFIG_SYS_FLASH_BASE		0xFE000000
 #define CONFIG_SYS_FLASH_INCREMENT	0x01000000
 
-#define CONFIG_SYS_FLASH_CFI         1       /* Flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER  1       /* Use the common driver */
-#define CONFIG_SYS_FLASH_PROTECTION  1       /* don't use hardware protection        */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1  /* use buffered writes (20x faster)     */
-#define CONFIG_SYS_MAX_FLASH_BANKS   2       /* max num of flash banks */
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_INCREMENT }
-#define CONFIG_SYS_MAX_FLASH_SECT    128     /* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_CFI		1 /* Flash is CFI conformant */
+#define CONFIG_FLASH_CFI_DRIVER		1 /* Use the common driver */
+#define CONFIG_SYS_FLASH_PROTECTION	1 /* don't use hardware protection */
+#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (faster) */
+#define CONFIG_SYS_MAX_FLASH_BANKS	2 /* max num of flash banks */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE, \
+			CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_INCREMENT}
+#define CONFIG_SYS_MAX_FLASH_SECT	128 /* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* print 'E' for empty sector on fli */
 
 /*
- * JFFS2 partitions - second bank contains u-boot
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_JFFS2_CMDLINE
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0x01b00000
-#define CONFIG_JFFS2_PART_OFFSET	0x00400000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_JFFS2_CMDLINE
-#define MTDIDS_DEFAULT		"nor0=pmc405-0"
-#define MTDPARTS_DEFAULT	"mtdparts=pmc405-0:-(jffs2)"
-*/
-
-/*-----------------------------------------------------------------------
  * Environment Variable setup
  */
 #define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
-#define CONFIG_ENV_SIZE		0x800	/* 2048 bytes may be used for env vars*/
-				   /* total size of a CAT24WC16 is 2048 bytes */
 
-#define CONFIG_SYS_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
-#define CONFIG_SYS_NVRAM_SIZE		242			/* NVRAM size		*/
+/* environment starts at the beginning of the EEPROM */
+#define CONFIG_ENV_OFFSET	0x000
+#define CONFIG_ENV_SIZE		0x800 /* 2048 bytes may be used for env vars */
 
-/*-----------------------------------------------------------------------
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xF0000500	/* NVRAM base address */
+#define CONFIG_SYS_NVRAM_SIZE		242		/* NVRAM size */
+
+/*
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SPEED		100000 /* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address		*/
-/* mask of address bits that overflow into the "EEPROM chip address"	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT24W16 */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has	*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24W16 has */
 					/* 16 byte page write mode using*/
-					/* last 4 bits of the address	*/
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
+					/* last	4 bits of the address */
 
-/*-----------------------------------------------------------------------
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+
+/*
  * External Bus Controller (EBC) Setup
  */
-#define FLASH0_BA	0xFF000000	    /* FLASH 0 Base Address		*/
-#define FLASH1_BA	0xFE000000	    /* FLASH 1 Base Address		*/
-#define CAN_BA		0xF0000000	    /* CAN Base Address			*/
-#define RTC_BA		0xF0000500	    /* RTC Base Address			*/
-#define NVRAM_BA        0xF0200000          /* NVRAM Base Address               */
+#define FLASH0_BA	0xFF000000	/* FLASH 0 Base Address	*/
+#define FLASH1_BA	0xFE000000	/* FLASH 1 Base Address	*/
+#define CAN_BA		0xF0000000	/* CAN Base Addres	*/
+#define RTC_BA		0xF0000500	/* RTC Base Address	*/
+#define NVRAM_BA	0xF0200000	/* NVRAM Base Address	*/
 
-/* Memory Bank 0 (Flash Bank 0) initialization					*/
+/* Memory Bank 0 (Flash Bank 0) initialization */
 #define CONFIG_SYS_EBC_PB0AP	0x92015480
-#define CONFIG_SYS_EBC_PB0CR	FLASH0_BA | 0x9A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit*/
+/* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0CR	(FLASH0_BA | 0x9A000)
 
-/* Memory Bank 1 (Flash Bank 1) initialization					*/
+/* Memory Bank 1 (Flash Bank 1) initialization */
 #define CONFIG_SYS_EBC_PB1AP	0x92015480
-#define CONFIG_SYS_EBC_PB1CR	FLASH1_BA | 0x9A000 /* BAS=0xFE0,BS=16MB,BU=R/W,BW=16bit*/
+/* BAS=0xFE0,BS=16MB,BU=R/W,BW=16bit*/
+#define CONFIG_SYS_EBC_PB1CR	(FLASH1_BA | 0x9A000)
 
-/* Memory Bank 2 (CAN0, 1, RTC) initialization					*/
-#define CONFIG_SYS_EBC_PB2AP	0x03000440   /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0      */
-#define CONFIG_SYS_EBC_PB2CR	CAN_BA | 0x18000    /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+/* Memory Bank 2 (CAN0, 1, RTC) initialization */
+/* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0      */
+#define CONFIG_SYS_EBC_PB2AP	0x03000440
+/* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
+#define CONFIG_SYS_EBC_PB2CR	(CAN_BA | 0x18000)
 
 /* Memory Bank 3 -> unused */
 
-/* Memory Bank 4 (NVRAM) initialization					*/
-#define CONFIG_SYS_EBC_PB4AP	0x03000440   /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0      */
-#define CONFIG_SYS_EBC_PB4CR	NVRAM_BA | 0x18000    /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/
+/* Memory Bank 4 (NVRAM) initialization */
+/* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */
+#define CONFIG_SYS_EBC_PB4AP	0x03000440
+/* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
+#define CONFIG_SYS_EBC_PB4CR	(NVRAM_BA | 0x18000)
 
-/*-----------------------------------------------------------------------
+/*
  * FPGA stuff
  */
-#define CONFIG_SYS_FPGA_XC95XL		1	    /* using Xilinx XC95XL CPLD	     */
-#define CONFIG_SYS_FPGA_MAX_SIZE	32*1024	    /* 32kByte is enough for CPLD    */
+#define CONFIG_SYS_FPGA_XC95XL		1	/* using Xilinx XC95XL CPLD */
+#define CONFIG_SYS_FPGA_MAX_SIZE	(32 * 1024) /* 32kByte for CPLD */
 
 /* FPGA program pin configuration */
-#define CONFIG_SYS_FPGA_PRG		0x04000000  /* JTAG TMS pin (ppc output)     */
-#define CONFIG_SYS_FPGA_CLK		0x02000000  /* JTAG TCK pin (ppc output)     */
-#define CONFIG_SYS_FPGA_DATA		0x01000000  /* JTAG TDO->TDI data pin (ppc output) */
-#define CONFIG_SYS_FPGA_INIT		0x00010000  /* unused (ppc input)	     */
-#define CONFIG_SYS_FPGA_DONE		0x00008000  /* JTAG TDI->TDO pin (ppc input) */
+#define CONFIG_SYS_FPGA_PRG		0x04000000 /* JTAG TMS pin (output) */
+#define CONFIG_SYS_FPGA_CLK		0x02000000 /* JTAG TCK pin (output) */
+#define CONFIG_SYS_FPGA_DATA		0x01000000 /* JTAG TDO pin (output) */
+#define CONFIG_SYS_FPGA_INIT		0x00010000 /* unused (ppc input) */
+#define CONFIG_SYS_FPGA_DONE		0x00008000 /* JTAG TDI pin (input) */
 
-#define CONFIG_SYS_VXWORKS_MAC_PTR	0x00000000	/* Pass Ethernet MAC to VxWorks */
+/* pass Ethernet MAC to VxWorks */
+#define CONFIG_SYS_VXWORKS_MAC_PTR	0x00000000
 
-/*-----------------------------------------------------------------------
+/*
  * GPIOs
  */
-#define CONFIG_SYS_NONMONARCH		(0x80000000 >> 14)   /* GPIO24 */
-#define CONFIG_SYS_XEREADY		(0x80000000 >> 15)   /* GPIO15 */
-#define CONFIG_SYS_INTA_FAKE		(0x80000000 >> 19)   /* GPIO19 */
-#define CONFIG_SYS_SELF_RST		(0x80000000 >> 21)   /* GPIO21 */
-#define CONFIG_SYS_REV1_2		(0x80000000 >> 23)   /* GPIO23 */
+#define CONFIG_SYS_VPEN			(0x80000000 >>  3) /* GPIO3 */
+#define CONFIG_SYS_NONMONARCH		(0x80000000 >> 14) /* GPIO14 */
+#define CONFIG_SYS_XEREADY		(0x80000000 >> 15) /* GPIO15 */
+#define CONFIG_SYS_INTA_FAKE		(0x80000000 >> 19) /* GPIO19 */
+#define CONFIG_SYS_SELF_RST		(0x80000000 >> 21) /* GPIO21 */
+#define CONFIG_SYS_REV1_2		(0x80000000 >> 23) /* GPIO23 */
 
-/*-----------------------------------------------------------------------
+/*
  * Definitions for initial stack pointer and data area (in data cache)
  */
 
-/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
+/* use on chip memory (OCM) for temperary stack until sdram is tested */
 #define CONFIG_SYS_TEMP_STACK_OCM	1
 
 /* On Chip Memory location */
 #define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
 #define CONFIG_SYS_OCM_DATA_SIZE	0x1000
 
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
-#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
-#define CONFIG_SYS_GBL_DATA_SIZE      128  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+/* inside of SDRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR
+
+/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_END		CONFIG_SYS_OCM_DATA_SIZE
+
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
+					 CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
@@ -341,7 +333,10 @@
  *
  * Boot Flags
  */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
 
-#endif	/* __CONFIG_H */
+#endif /* __CONFIG_H */