summaryrefslogtreecommitdiff
path: root/include/configs/TQM5200.h
diff options
context:
space:
mode:
authorwdenk <wdenk>2005-03-31 18:42:15 +0000
committerwdenk <wdenk>2005-03-31 18:42:15 +0000
commit83e40ba75d7f8d0c2e2ecdd203db96ccd79a0340 (patch)
treec744211f014f6ba34b524c98f78d624e554261f0 /include/configs/TQM5200.h
parent0c1c117cf18ffa3fdc0342dfc47c6003fc5fc5a0 (diff)
* Patch by Detlev Zundel, 31 Mar 2005:
Cleanup duplicate definition of overwrite_console() * Update TQM5200 configuration; prepare for Rev. 200 starter kit boards
Diffstat (limited to 'include/configs/TQM5200.h')
-rw-r--r--include/configs/TQM5200.h26
1 files changed, 18 insertions, 8 deletions
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index a5a63443f2..b33f726e8a 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -37,6 +37,7 @@
#define CONFIG_TQM5200 1 /* ... on TQM5200 module */
#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */
#define CONFIG_STK52XX 1 /* ... on a STK52XX base board */
+#define CONFIG_STK52XX_REV100 1 /* define for revision 100 baseboards */
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
@@ -85,6 +86,7 @@
#define CONFIG_EEPRO100 1
#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define CONFIG_NS8382X 1
+#endif /* CONFIG_STK52XX */
#ifdef CONFIG_PCI
#define ADD_PCI_CMD CFG_CMD_PCI
@@ -105,6 +107,7 @@
#define CONFIG_CONSOLE_EXTRA_INFO
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_SPLASH_SCREEN
+#define CFG_CONSOLE_IS_IN_ENV
#endif
#ifdef CONFIG_VIDEO
@@ -373,11 +376,14 @@
* Bit 0 (mask: 0x80000000): 1
* use ALT CAN position: Bits 2-3 (mask: 0x30000000):
* 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
- * Set for rev 100 modules with an onboard EEPROM (because,
- * there I2C1 is used as I2C bus)
* 01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
- * Set for rev 200 modules
+ * Use for REV200 STK52XX boards. Do not use with REV100 modules
+ * (because, there I2C1 is used as I2C bus)
* use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
+ * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
+ * 000 -> All PSC2 pins are GIOPs
+ * 001 -> CAN1/2 on PSC2 pins
+ * Use for REV100 STK52xx boards
* use PSC6:
* on STK52xx:
* use as UART. Pins PSC6_0 to PSC6_3 are used.
@@ -392,12 +398,16 @@
#if defined (CONFIG_MINIFAP)
# define CFG_GPS_PORT_CONFIG 0x91000004
#elif defined (CONFIG_STK52XX)
-# if defined (CONFIG_TQM5200_REV100)
-# define CFG_GPS_PORT_CONFIG 0x81500004
-# else
-# define CFG_GPS_PORT_CONFIG 0x91500004
+# if defined (CONFIG_STK52XX_REV100)
+# define CFG_GPS_PORT_CONFIG 0x81500014
+# else /* STK52xx REV200 and above */
+# if defined (CONFIG_TQM5200_REV100)
+# error TQM5200 REV100 not supported on STK52XX REV200 or above
+# else/* TQM5200 REV200 and above */
+# define CFG_GPS_PORT_CONFIG 0x91500004
+# endif
# endif
-#else /* TMQ5200_IP */
+#else /* TMQ5200 Inbetriebnahme-Board */
# define CFG_GPS_PORT_CONFIG 0x81000004
#endif