Merge ../custodians

1 files changed, 218 insertions, 0 deletions

diff --git a/include/configs/actux4.h b/include/configs/actux4.h
new file mode 100644
index 0000000000..e4dca2afac
--- /dev/null
+++ b/include/configs/actux4.h
@@ -0,0 +1,218 @@
+/*
+ * (C) Copyright 2007
+ * Michael Schwingen, michael@schwingen.org
+ *
+ * Configuration settings for the AcTux-4 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_IXP425			1
+#define CONFIG_ACTUX4			1
+
+#define CONFIG_DISPLAY_CPUINFO		1
+#define CONFIG_DISPLAY_BOARDINFO	1
+
+#define CFG_IXP425_CONSOLE		IXP425_UART1
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_BOOTDELAY		3
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+
+/***************************************************************
+ * U-boot generic defines start here.
+ ***************************************************************/
+#undef CONFIG_USE_IRQ
+
+/* Size of malloc() pool */
+#define CFG_MALLOC_LEN			(CFG_ENV_SIZE + 128*1024)
+/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_SIZE		128
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+
+#define CONFIG_BOOTCOMMAND		"run boot_flash"
+/* enable passing of ATAGs */
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#if defined(CONFIG_CMD_KGDB)
+# define CONFIG_KGDB_BAUDRATE		230400
+/* which serial port to use */
+# define CONFIG_KGDB_SER_INDEX		1
+#endif
+
+/* Miscellaneous configurable options */
+#define CFG_LONGHELP
+#define CFG_PROMPT			"=> "
+/* Console I/O Buffer Size */
+#define CFG_CBSIZE			256
+/* Print Buffer Size */
+#define CFG_PBSIZE			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+/* max number of command args */
+#define CFG_MAXARGS			16
+/* Boot Argument Buffer Size */
+#define CFG_BARGSIZE			CFG_CBSIZE
+
+#define CFG_MEMTEST_START		0x00400000
+#define CFG_MEMTEST_END			0x00800000
+
+/* everything, incl board info, in Hz */
+#undef  CFG_CLKS_IN_HZ
+/* spec says 66.666 MHz, but it appears to be 33 */
+#define CFG_HZ				3333333
+
+/* default load address */
+#define CFG_LOAD_ADDR			0x00010000
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
+					  115200, 230400 }
+#define CONFIG_SERIAL_RTS_ACTIVE	1
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE		(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+# define CONFIG_STACKSIZE_IRQ		(4*1024)	/* IRQ stack */
+# define CONFIG_STACKSIZE_FIQ		(4*1024)	/* FIQ stack */
+#endif
+
+/* Expansion bus settings */
+#define CFG_EXP_CS0			0xbd113003
+
+/* SDRAM settings */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM_1			0x00000000
+#define CFG_DRAM_BASE			0x00000000
+
+/* 32MB SDRAM */
+#define CFG_SDR_CONFIG			0x18
+#define PHYS_SDRAM_1_SIZE		0x02000000
+#define CFG_SDRAM_REFRESH_CNT		0x81a
+#define CFG_SDR_MODE_CONFIG		0x1
+#define CFG_DRAM_SIZE			0x02000000
+
+/* FLASH organization */
+#define CFG_MAX_FLASH_BANKS		2
+/* max # of sectors per chip */
+#define CFG_MAX_FLASH_SECT		70
+#define PHYS_FLASH_1			0x50000000
+#define PHYS_FLASH_2			0x51000000
+#define CFG_FLASH_BANKS_LIST		{ PHYS_FLASH_1, PHYS_FLASH_2 }
+
+#define CFG_FLASH_BASE			PHYS_FLASH_1
+#define CFG_MONITOR_BASE		PHYS_FLASH_1
+#define CFG_MONITOR_LEN			(252 << 10)
+
+/* Use common CFI driver */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+/* board provides its own flash_init code */
+#define CONFIG_FLASH_CFI_LEGACY		1
+/* no byte writes on IXP4xx */
+#define CFG_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
+/* SST 39VF020 etc. support */
+#define CFG_FLASH_LEGACY_256Kx8	1
+
+/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_EMPTY_INFO
+
+/* Ethernet */
+
+/* include IXP4xx NPE support */
+#define CONFIG_IXP4XX_NPE		1
+/* use separate flash sector with ucode images */
+#define CONFIG_IXP4XX_NPE_EXT_UCODE_BASE	0x51000000
+
+#define CONFIG_NET_MULTI		1
+/* NPE0 PHY address */
+#define	CONFIG_PHY_ADDR			0x1C
+/* MII PHY management */
+#define CONFIG_MII			1
+/* Number of ethernet rx buffers & descriptors */
+#define CFG_RX_ETH_BUFFER		16
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#undef  CONFIG_CMD_NFS
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* Cache Configuration */
+#define CFG_CACHELINE_SIZE		32
+
+/* environment organization: one complete 4k flash sector */
+#define	CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_SIZE			0x1000
+#define CFG_ENV_ADDR			(PHYS_FLASH_1 + 0x3f000)
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"mtd=IXP4XX-Flash.0:252k(uboot),4k(uboot_env);"			\
+	"IXP4XX-Flash.1:128k(ucode),1280k(linux),-(root)\0"		\
+	"kerneladdr=51020000\0"						\
+	"rootaddr=51160000\0"						\
+	"loadaddr=10000\0"						\
+	"updateboot_ser=mw.b 10000 ff 40000;"				\
+	" loady ${loadaddr};"						\
+	" run eraseboot writeboot\0"					\
+	"updateboot_net=mw.b 10000 ff 40000;"				\
+	" tftp ${loadaddr} u-boot.bin;"					\
+	" run eraseboot writeboot\0"					\
+	"eraseboot=protect off 50000000 5003efff;"			\
+	" erase 50000000 +${filesize}\0"				\
+	"writeboot=cp.b 10000 50000000 ${filesize}\0"			\
+	"eraseenv=protect off 5003f000 5003ffff;"			\
+	" erase 5003f000 5003ffff\0"					\
+	"updateroot=tftp ${loadaddr} ${rootfile};"			\
+	" era ${rootaddr} +${filesize};"				\
+	" cp.b ${loadaddr} ${rootaddr} ${filesize}\0"			\
+	"updatekern=tftp ${loadaddr} ${kernelfile};"			\
+	" era ${kerneladdr} +${filesize};"				\
+	" cp.b ${loadaddr} ${kerneladdr} ${filesize}\0"			\
+	"flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4"	\
+	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
+	"netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock4"	\
+	" rootfstype=squashfs,jffs2 init=/etc/preinit\0"		\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
+	"addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0"	\
+	"boot_flash=run flashargs addtty addeth;"			\
+	" bootm ${kerneladdr}\0"					\
+	"boot_net=run netargs addtty addeth;"				\
+	" tftpboot ${loadaddr} ${kernelfile};"				\
+	" bootm\0"
+
+#endif /* __CONFIG_H */