Blackfin: bf561-acvilon: new board port

Signed-off-by: Valentin Yakovenkov <yakovenkov@niistt.ru>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 178 insertions, 0 deletions

diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h
new file mode 100644
index 0000000000..0be170c3ee
--- /dev/null
+++ b/include/configs/bf561-acvilon.h
@@ -0,0 +1,178 @@
+/*
+ * U-boot - Configuration file for BF561 Acvilon System On Module
+ * For more information please go to http://www.niistt.ru/
+ */
+
+#ifndef __CONFIG_BF561_ACVILON_H__
+#define __CONFIG_BF561_ACVILON_H__
+
+#include <asm/config-pre.h>
+
+
+/*
+ * Processor Settings
+ */
+#define CONFIG_BFIN_CPU				bf561-0.5
+#define CONFIG_BFIN_BOOT_MODE		BFIN_BOOT_BYPASS
+
+
+/*
+ * Clock Settings
+ *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
+ */
+/* CONFIG_CLKIN_HZ is any value in Hz					*/
+#define CONFIG_CLKIN_HZ				12000000
+/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
+/*                                                1 = CLKIN / 2		*/
+#define CONFIG_CLKIN_HALF			0
+/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
+/*                                                1 = bypass PLL	*/
+#define CONFIG_PLL_BYPASS			0
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
+/* Values can range from 0-63 (where 0 means 64)			*/
+#define CONFIG_VCO_MULT				50
+/* CCLK_DIV controls the core clock divider				*/
+/* Values can be 1, 2, 4, or 8 ONLY					*/
+#define CONFIG_CCLK_DIV				1
+/* SCLK_DIV controls the system clock divider				*/
+/* Values can range from 1-15						*/
+#define CONFIG_SCLK_DIV				5
+
+
+/*
+ * Memory Settings
+ */
+#define CONFIG_MEM_ADD_WDTH			10
+#define CONFIG_MEM_SIZE				128
+
+#define CONFIG_EBIU_SDRRC_VAL		0x300
+#define CONFIG_EBIU_SDGCTL_VAL		0x00B11189
+
+#define CONFIG_EBIU_AMGCTL_VAL		0x4e
+#define CONFIG_EBIU_AMBCTL0_VAL		0xffc2ffc2
+#define CONFIG_EBIU_AMBCTL1_VAL		0x99b35554
+
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)
+
+
+/*
+ * RTC Settings
+ */
+#define CONFIG_RTC_DS1337
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible)                       */
+#define CONFIG_DTT_LM75         1               /* ON Semi's LM75       */
+#define CONFIG_DTT_SENSORS      {0}             /* Sensor addresses     */
+#define CONFIG_SYS_I2C_DTT_ADDR 0x49
+/*#define CONFIG_SYS_DTT_MAX_TEMP 70
+#define CONFIG_SYS_DTT_LOW_TEMP -30
+#define CONFIG_SYS_DTT_HYSTERESIS       3*/
+
+
+/*
+ * Network Settings
+ */
+#define ADI_CMDS_NETWORK			1
+#define CONFIG_NET_MULTI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DTT
+
+#if defined(CONFIG_CMD_NET)
+
+#define CONFIG_SMC911X				1
+#define CONFIG_SMC911X_32_BIT
+/* #define CONFIG_SMC911X_16_BIT */
+#define CONFIG_SMC911X_BASE			0x28000000
+
+#endif /* (CONFIG_CMD_NET) */
+
+#define CONFIG_HOSTNAME		bf561-acvilon
+
+/* Uncomment next line to use fixed MAC address */
+/* #define CONFIG_ETHADDR				02:80:ad:20:31:e8 */
+
+
+/*
+ * Flash Settings
+ */
+#define CONFIG_SYS_NO_FLASH
+
+
+/*
+ * I2C Settings
+ */
+#define CONFIG_HARD_I2C
+/* Use 300kHz speed by default */
+#define CONFIG_SYS_I2C_SPEED			0x00
+#define CONFIG_PCA9564_I2C
+#define CONFIG_PCA9564_BASE			0x2c000000
+
+
+/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ		10000000
+#define CONFIG_SF_DEFAULT_SPEED		10000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL
+
+
+/*
+ * Env Storage Settings
+ */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+/* #define CONFIG_CMD_SAVEENV */
+#define CONFIG_ENV_SECT_SIZE		(1056 * 8)
+#define CONFIG_ENV_OFFSET			((16 + 256) * 1056)
+#define CONFIG_ENV_SIZE				(8 * 1056)
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+
+
+/*
+ * NAND Settings
+ * We're using NAND_PLAT driver to make things simplier
+ */
+#define CONFIG_NAND_PLAT
+#define CONFIG_CMD_NAND
+#define CONFIG_SYS_NAND_BASE		0x24000000
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+
+#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
+#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 3))
+#define BFIN_NAND_READY     PF10
+#define BFIN_NAND_WRITE(addr, cmd) \
+	do { \
+		bfin_write8(addr, cmd); \
+		SSYNC(); \
+	} while (0)
+
+#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
+#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
+#define NAND_PLAT_DEV_READY(chip)      (bfin_read_FIO0_FLAG_D() & BFIN_NAND_READY)
+#define NAND_PLAT_INIT() \
+	do { \
+		bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() & ~BFIN_NAND_READY); \
+		bfin_write_FIO0_INEN(bfin_read_FIO0_INEN() | BFIN_NAND_READY); \
+	} while (0)
+
+
+/*
+ * Misc Settings
+ */
+#define CONFIG_UART_CONSOLE			0
+#define CONFIG_BAUDRATE				57600
+#define CONFIG_SYS_PROMPT "Acvilon> "
+
+
+/*
+ * Pull in common ADI header for remaining command/environment setup
+ */
+#include <configs/bfin_adi_common.h>
+
+#endif				/* __CONFIG_BF561_ACVILON_H__ */