Blackfin: Remove

The architecture is currently unmaintained, remove.

Cc: Benjamin Matthews <mben12@gmail.com>
Cc: Chong Huang <chuang@ucrobotics.com>
Cc: Dimitar Penev <dpn@switchfin.org>
Cc: Haitao Zhang <hzhang@ucrobotics.com>
Cc: I-SYST Micromodule <support@i-syst.com>
Cc: M.Hasewinkel (MHA) <info@ssv-embedded.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martin Strubel <strubel@section5.ch>
Cc: Peter Meerwald <devel@bct-electronic.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
Cc: Valentin Yakovenkov <yakovenkov@niistt.ru>
Cc: Wojtek Skulski <info@skutek.com>
Cc: Wojtek Skulski <skulski@pas.rochester.edu>
Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 140 deletions

diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h
deleted file mode 100644
index d9f91b5b9a..0000000000
--- a/include/configs/cm-bf537e.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * U-Boot - Configuration file for CM-BF537E board
- */
-
-#ifndef __CONFIG_CM_BF537E_H__
-#define __CONFIG_CM_BF537E_H__
-
-#include <asm/config-pre.h>
-
-/*
- * Processor Settings
- */
-#define CONFIG_BFIN_CPU             bf537-0.2
-#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
-
-/*
- * Clock Settings
- *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
- *	SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
- */
-/* CONFIG_CLKIN_HZ is any value in Hz					*/
-#define CONFIG_CLKIN_HZ			25000000
-/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
-/*                                                1 = CLKIN / 2		*/
-#define CONFIG_CLKIN_HALF		0
-/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass	*/
-/*                                                1 = bypass PLL	*/
-#define CONFIG_PLL_BYPASS		0
-/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
-/* Values can range from 0-63 (where 0 means 64)			*/
-#define CONFIG_VCO_MULT			21
-/* CCLK_DIV controls the core clock divider				*/
-/* Values can be 1, 2, 4, or 8 ONLY					*/
-#define CONFIG_CCLK_DIV			1
-/* SCLK_DIV controls the system clock divider				*/
-/* Values can range from 1-15						*/
-#define CONFIG_SCLK_DIV			4
-
-/* Decrease core voltage */
-#define CONFIG_VR_CTL_VAL (VLEV_115 | CLKBUFOE | GAIN_20 | FREQ_1000)
-
-/*
- * Memory Settings
- */
-#define CONFIG_MEM_ADD_WDTH	9
-#define CONFIG_MEM_SIZE		32
-
-#define CONFIG_EBIU_SDRRC_VAL	0x3f8
-#define CONFIG_EBIU_SDGCTL_VAL	0x9111cd
-
-#define CONFIG_EBIU_AMGCTL_VAL	(AMBEN_ALL)
-#define CONFIG_EBIU_AMBCTL0_VAL	(B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
-#define CONFIG_EBIU_AMBCTL1_VAL	(B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
-
-#define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN	(128 * 1024)
-
-/*
- * Network Settings
- */
-#ifndef __ADSPBF534__
-#define ADI_CMDS_NETWORK	1
-#define CONFIG_BFIN_MAC
-#define CONFIG_SMC911X		1
-#define CONFIG_SMC911X_BASE	0x20308000
-#define CONFIG_SMC911X_16_BIT
-#define CONFIG_NETCONSOLE	1
-#endif
-#define CONFIG_HOSTNAME		cm-bf537e
-
-/*
- * Flash Settings
- */
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
-#define CONFIG_SYS_FLASH_BASE		0x20000000
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	35
-
-/*
- * SPI Settings
- */
-#define CONFIG_BFIN_SPI
-#define CONFIG_ENV_SPI_MAX_HZ	30000000
-
-/*
- * Env Storage Settings
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET	0x8000
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_SECT_SIZE	0x8000
-#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
-#define ENV_IS_EMBEDDED
-#endif
-#ifdef ENV_IS_EMBEDDED
-/* WARNING - the following is hand-optimized to fit within
- * the sector before the environment sector. If it throws
- * an error during compilation remove an object here to get
- * it linked after the configuration sector.
- */
-# define LDS_BOARD_TEXT \
-	arch/blackfin/lib/built-in.o (.text*); \
-	arch/blackfin/cpu/built-in.o (.text*); \
-	. = DEFINED(env_offset) ? env_offset : .; \
-	common/env_embedded.o (.text*);
-#endif
-
-/*
- * I2C Settings
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_ADI
-
-/*
- * SPI_MMC Settings
- */
-#define CONFIG_MMC_SPI
-
-/*
- * Misc Settings
- */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_RTC_BFIN
-#define CONFIG_UART_CONSOLE	0
-#define CONFIG_BOOTCOMMAND	"run flashboot"
-#define FLASHBOOT_ENV_SETTINGS \
-	"flashboot=flread 20040000 1000000 3c0000;" \
-	"bootm 0x1000000\0"
-#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024))
-
-/*
- * Pull in common ADI header for remaining command/environment setup
- */
-#include <configs/bfin_adi_common.h>
-
-#endif