arm: Remove unmaintained davinci boards

These boards have not been converted to generic board by the deadline.
Remove dm355evm, dm355leopard, dm365evm, dm6467evm, dvevm, ea20, schmoogie,
sffsdr, sonata.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 220 deletions

diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h
deleted file mode 100644
index bbc801b4db..0000000000
--- a/include/configs/davinci_dm365evm.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* Spectrum Digital TMS320DM365 EVM board */
-#define DAVINCI_DM365EVM
-
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is a 3rd stage loader */
-#define CONFIG_SYS_NO_FLASH		/* that is, no *NOR* flash */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/* SoC Configuration */
-#define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
-#define CONFIG_SYS_HZ_CLOCK		24000000	/* timer0 freq */
-#define CONFIG_SOC_DM365
-
-/* Memory Info */
-#define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM_1			0x80000000
-#define PHYS_SDRAM_1_SIZE		(128 << 20)	/* 128 MiB */
-
-/* Serial Driver info: UART0 for console  */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	-4
-#define CONFIG_SYS_NS16550_COM1		0x01c20000
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_HZ_CLOCK
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_BAUDRATE			115200
-
-/* EEPROM definitions for EEPROM on DM365 EVM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
-
-/* Network Configuration */
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT	10
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED		400000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE		0x10	/* SMBus host address */
-
-/* NAND: socketed, two chipselects, normally 2 GBytes */
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_CS		2
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
-#define CONFIG_SYS_NAND_PAGE_2K
-
-#define CONFIG_SYS_NAND_LARGEPAGE
-#define CONFIG_SYS_NAND_BASE_LIST	{ 0x02000000, }
-/* socket has two chipselects, nCE0 gated by address BIT(14) */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_MAX_CHIPS	2
-
-/* SD/MMC */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DAVINCI_MMC
-#define CONFIG_DAVINCI_MMC_SD1
-#define CONFIG_MMC_MBLOCK
-
-#define PINMUX4_USBDRVBUS_BITCLEAR       0x3000
-#define PINMUX4_USBDRVBUS_BITSET         0x2000
-
-/* USB Configuration */
-#define CONFIG_USB_DAVINCI
-#define CONFIG_USB_MUSB_HCD
-
-#ifdef CONFIG_USB_DAVINCI
-#define CONFIG_CMD_USB         /* include support for usb      */
-#define CONFIG_CMD_STORAGE     /* include support for usb      */
-#define CONFIG_CMD_FAT         /* include support for FAT/storage*/
-#define CONFIG_DOS_PARTITION   /* include support for FAT/storage*/
-#endif
-
-#ifdef CONFIG_USB_MUSB_HCD         /* include support for usb host */
-#define CONFIG_CMD_USB         /* include support for usb cmd */
-#define CONFIG_USB_STORAGE     /* MSC class support */
-#define CONFIG_CMD_STORAGE     /* inclue support for usb-storage cmd */
-#define CONFIG_CMD_FAT         /* inclue support for FAT/storage */
-#define CONFIG_DOS_PARTITION   /* inclue support for FAT/storage */
-
-#ifdef CONFIG_USB_KEYBOARD     /* HID class support */
-#define CONFIG_SYS_USB_EVENT_POLL
-
-#define CONFIG_PREBOOT "usb start"
-#endif /* CONFIG_USB_KEYBOARD */
-#endif /* CONFIG_USB_MUSB_HCD */
-
-#ifdef CONFIG_USB_MUSB_UDC
-#define CONFIG_USB_DEVICE              1
-#define CONFIG_USB_TTY                 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   1
-#define CONFIG_USBD_VENDORID           0x0451
-#define CONFIG_USBD_PRODUCTID          0x5678
-#define CONFIG_USBD_MANUFACTURER       "Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME       "DM365VM"
-#endif /* CONFIG_USB_MUSB_UDC */
-
-/* U-Boot command configuration */
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MMC
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_UBI
-#define CONFIG_RBTREE
-#endif
-
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-
-/* U-Boot general configuration */
-#define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size  */
-#define CONFIG_SYS_PBSIZE			/* Print buffer size */ \
-		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP
-
-#ifdef CONFIG_NAND_DAVINCI
-#define CONFIG_ENV_SIZE		(256 << 10)	/* 256 KiB */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET	0x3C0000
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_CMD_ENV
-#define CONFIG_ENV_SIZE		(16 << 10)	/* 16 KiB */
-#define CONFIG_ENV_OFFSET	(51 << 9)	/* Sector 51 */
-#define CONFIG_ENV_IS_IN_MMC
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTCOMMAND \
-		"dhcp;bootm"
-#define CONFIG_BOOTARGS \
-		"console=ttyS0,115200n8 " \
-		"root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro"
-
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_TIMESTAMP
-
-/* U-Boot memory configuration */
-#define CONFIG_SYS_MALLOC_LEN		(1 << 20)	/* 1 MiB */
-#define CONFIG_SYS_MEMTEST_START	0x87000000	/* physical address */
-#define CONFIG_SYS_MEMTEST_END		0x88000000	/* test 16MB RAM */
-
-/* Linux interfacing */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_SYS_BARGSIZE	1024			/* bootarg Size */
-#define CONFIG_SYS_LOAD_ADDR	0x80700000		/* kernel address */
-
-
-/* NAND configuration issocketed with two chipselects just like the DM355 EVM.
- * It normally comes with a 2GByte SLC part with 2KB pages
- * (and 128KB erase blocks); other
- * 2GByte parts may have 4KB pages, 256KB erase blocks, and use MLC.  (MLC
- * pretty much demands the 4-bit ECC support.)  You can of course swap in
- * other parts, including small page ones.
- */
-#define MTDIDS_DEFAULT		"nand0=davinci_nand.0"
-
-#ifdef CONFIG_SYS_NAND_LARGEPAGE
-/*  Use same layout for 128K/256K blocks; allow some bad blocks */
-#define PART_BOOT		"2m(bootloader)ro,"
-#else
-/* Assume 16K erase blocks; allow a few bad ones. */
-#define PART_BOOT		"512k(bootloader)ro,"
-#endif
-
-#define PART_KERNEL		"4m(kernel),"	/* kernel + initramfs */
-#define PART_REST		"-(filesystem)"
-
-#define MTDPARTS_DEFAULT	\
-	"mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
-
-#define CONFIG_MAX_RAM_BANK_SIZE	(256 << 20)	/* 256 MB */
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		\
-	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */