summaryrefslogtreecommitdiff
path: root/include/configs/km
diff options
context:
space:
mode:
authorPascal Linder <pascal.linder@edu.hefr.ch>2019-07-09 09:28:22 +0200
committerStefan Roese <sr@denx.de>2019-08-12 09:12:38 +0200
commite5c9e830b8daba4ad511d457fdf76944605e0376 (patch)
tree1106096964aeb6f7cd7ab78c4191f5b06a5682d2 /include/configs/km
parent432579c4d1ee89da7322ff11f0424360df2b0d95 (diff)
km: clean up header files for KM Kirkwood boards
Remove unused preprocessor definitions and comments of already eliminated code. The Ethernet driver configuration is already declared in arch/arm/mach-kirkwood/include/mach/config.h and, therefore, superfluous. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'include/configs/km')
-rw-r--r--include/configs/km/keymile-common.h2
-rw-r--r--include/configs/km/km_arm.h22
2 files changed, 0 insertions, 24 deletions
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index 3106ef1d8c..8433d8e568 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -7,8 +7,6 @@
#ifndef __CONFIG_KEYMILE_H
#define __CONFIG_KEYMILE_H
-#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
-
/*
* Miscellaneous configurable options
*/
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index 22bd744660..8b0b665af5 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -32,8 +32,6 @@
/* include common defines/options for all Keymile boards */
#include "keymile-common.h"
-/* SPI NOR Flash default params, used by sf commands */
-
/* Reserve 4 MB for malloc */
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
@@ -72,17 +70,10 @@
#define CONFIG_SYS_NS16550_COM2 KW_UART1_BASE
/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_INITRD_TAG /* enable INITRD tag */
#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
@@ -92,22 +83,16 @@
*/
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define BOOTFLASH_START 0x0
-
/*
* Other required minimal configurations
*/
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
/*
* Ethernet Driver configuration
*/
-#define CONFIG_NETCONSOLE /* include NetConsole support */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
-#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
/*
* I2C related stuff
@@ -221,13 +206,8 @@ int get_scl(void);
"arch=arm\0" \
""
-#if !defined(CONFIG_MTD_NOR_FLASH)
-#undef CONFIG_JFFS2_CMDLINE
-#endif
-
/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_SDRAM_BASE 0x00000000
-/* Do early setups now in board_init_f() */
/* address for the bootcount (taken from end of RAM) */
#define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM)
@@ -237,6 +217,4 @@ int get_scl(void);
#define CONFIG_POST_SKIP_ENV_FLAGS
#define CONFIG_POST_EXTERNAL_WORD_FUNCS
-/* we do the whole PCIe FPGA config stuff here */
-
#endif /* _CONFIG_KM_ARM_H */