diff options
author | Lukasz Majewski <lukma@denx.de> | 2018-04-26 15:07:18 +0200 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2018-05-18 08:29:38 +0200 |
commit | ee943655576f4a9e0af832e00a682a8d9f425bb1 (patch) | |
tree | 90d197fc64708e49e9dadc5d7eb981ada14cfef0 /include/configs/kp_imx53.h | |
parent | 3edf9ebea047d9bb2403dcaea651784608255e0c (diff) |
arm: imx53: Add support for imx53 boards from K+P
This commit adds support for DDC and HSC boards from
K+P in u-boot.
Console output:
U-Boot 2018.05-rc2-00090-g752b7ed6f9 (Apr 26 2018 - 14:24:24 +0200)
CPU: Freescale i.MX53 rev2.1 at 800 MHz
Reset cause: WDOG
Model: K+P iMX53
DRAM: 512 MiB
MMC: FSL_SDHC: 0
Loading Environment from MMC... OK
In: serial
Out: serial
Err: serial
Module EEPROM:
ID: TQMa53-CB.0401
SN: 63152762
MAC: 00:0b:64:03:14:2a
BBoard:40x0 Rev:10
Net: eth0: ethernet@63fec000
Hit any key to stop autoboot: 0
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Diffstat (limited to 'include/configs/kp_imx53.h')
-rw-r--r-- | include/configs/kp_imx53.h | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h new file mode 100644 index 0000000000..c2eaf31760 --- /dev/null +++ b/include/configs/kp_imx53.h @@ -0,0 +1,113 @@ +/* + * Copyright (C) 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H_ +#define __CONFIG_H_ + +#include <asm/arch/imx-regs.h> +#include <linux/sizes.h> + +#define CONFIG_SYS_FSL_CLK + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_NUM 1 + +/* Eth Configs */ +#define CONFIG_MII + +/* USB Configs */ +#define CONFIG_USB_EHCI_MX5 +#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 + +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_BUS_NUM 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/* Command definition */ +#define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=ttymxc1,115200\0" \ + "fdt_addr=0x75000000\0" \ + "fdt_high=0xffffffff\0" \ + "scriptaddr=0x74000000\0" \ + "kernel_file=fitImage\0"\ + "rdinit=/sbin/init\0" \ + "addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \ + "upd_image=st.4k\0" \ + "uboot_file=u-boot.imx\0" \ + "updargs=setenv bootargs console=${console} ${smp}"\ + "rdinit=${rdinit} ${debug} ${displayargs}\0" \ + "loadusb=usb start; " \ + "fatload usb 0 ${loadaddr} ${upd_image}\0" \ + "up=if tftp ${loadaddr} ${uboot_file}; then " \ + "setexpr blkc ${filesize} / 0x200; " \ + "setexpr blkc ${blkc} + 1; " \ + "mmc write ${loadaddr} 0x2 ${blkc}" \ + "; fi\0" \ + "upwic=setenv wic_file kp-image-kp${boardsoc}${boardtype}.wic; "\ + "if tftp ${loadaddr} ${wic_file}; then " \ + "setexpr blkc ${filesize} / 0x200; " \ + "setexpr blkc ${blkc} + 1; " \ + "mmc write ${loadaddr} 0x0 ${blkc}" \ + "; fi\0" \ + "usbupd=echo Booting update from usb ...; " \ + "setenv bootargs; " \ + "run updargs; " \ + "run loadusb; " \ + "bootm ${loadaddr}#${fit_config}\0" \ + BOOTENV + +#define CONFIG_BOOTCOMMAND "run usbupd; run distro_bootcmd" + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> + +#define CONFIG_ARP_TIMEOUT 200UL + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (512 * SZ_1M) +#define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE) + +#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) +#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* environment organization */ +#define CONFIG_ENV_OFFSET (SZ_1M) +#define CONFIG_ENV_SIZE (SZ_8K) +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#endif /* __CONFIG_H_ */ |