diff options
author | Tom Rini <trini@konsulko.com> | 2020-04-07 11:58:44 -0400 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2020-04-07 17:13:35 -0400 |
commit | 1f47e2aca42c2e51ff3a7754c717ee13f568c721 (patch) | |
tree | eca6cb5e551dbb75c2328b1dba3e7a2b8a77d327 /include/configs/ls1028a_common.h | |
parent | 2b18b89156335bf1f0d84f81d3597762bc48c61d (diff) | |
parent | 895a7866c20cf6c01779b5a60fbf2770b88930a4 (diff) |
Merge tag 'xilinx-for-v2020.07' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next
Xilinx changes for v2020.07
common:
- Align ENV_FAT_INTERFACE
- Fix MAC address source print log
- Improve based autodetection code
xilinx:
- Enable netconsole
Microblaze:
- Setup default ENV_OFFSET/ENV_SECT_SIZE
Zynq:
- Multiple DT updates/fixes
- Use DEVICE_TREE environment variable for DTB selection
- Switch to single zynq configuration
- Enable NOR flash via DM
- Minor SPL print removal
- Enable i2c mux driver
ZynqMP:
- Print multiboot register
- Enable cache commands in mini mtest
- Multiple DT updates/fixes
- Fix firmware probing when driver is not enabled
- Specify 3rd backup RAM boot mode in SPL
- Add SPL support for zcu102 v1.1 and zcu111 revA
- Redesign debug uart enabling and psu_init delay
- Enable full u-boot run from EL3
- Enable u-boot.itb generation without ATF with U-Boot in EL3
Versal:
- Enable distro default
- Enable others SPI flashes
- Enable systems without DDR
Drivers:
- Gem:
- Flush memory after freeing
- Handle mdio bus separately
- Watchdog:
- Get rid of unused global data pointer
- Enable window watchdog timer
- Serial:
- Change reinitialization logic in zynq serial driver
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'include/configs/ls1028a_common.h')
-rw-r--r-- | include/configs/ls1028a_common.h | 92 |
1 files changed, 3 insertions, 89 deletions
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index 05b8cf00ee..6905694d10 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright 2019 NXP + * Copyright 2019-2020 NXP */ #ifndef __L1028A_COMMON_H @@ -70,96 +70,10 @@ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ - func(USB, usb, 0) + func(USB, usb, 0) \ + func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -/* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "board=ls1028ardb\0" \ - "hwconfig=fsl_ddr:bank_intlv=auto\0" \ - "ramdisk_addr=0x800000\0" \ - "ramdisk_size=0x2000000\0" \ - "fdt_high=0xffffffffffffffff\0" \ - "initrd_high=0xffffffffffffffff\0" \ - "fdt_addr=0x00f00000\0" \ - "kernel_addr=0x01000000\0" \ - "scriptaddr=0x80000000\0" \ - "scripthdraddr=0x80080000\0" \ - "fdtheader_addr_r=0x80100000\0" \ - "kernelheader_addr_r=0x80200000\0" \ - "load_addr=0xa0000000\0" \ - "kernel_addr_r=0x81000000\0" \ - "fdt_addr_r=0x90000000\0" \ - "ramdisk_addr_r=0xa0000000\0" \ - "kernel_start=0x1000000\0" \ - "kernelheader_start=0x800000\0" \ - "kernel_load=0xa0000000\0" \ - "kernel_size=0x2800000\0" \ - "kernelheader_size=0x40000\0" \ - "kernel_addr_sd=0x8000\0" \ - "kernel_size_sd=0x14000\0" \ - "kernelhdr_addr_sd=0x4000\0" \ - "kernelhdr_size_sd=0x10\0" \ - "console=ttyS0,115200\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - BOOTENV \ - "boot_scripts=ls1028ardb_boot.scr\0" \ - "boot_script_hdr=hdr_ls1028ardb_bs.out\0" \ - "scan_dev_for_boot_part=" \ - "part list ${devtype} ${devnum} devplist; " \ - "env exists devplist || setenv devplist 1; " \ - "for distro_bootpart in ${devplist}; do " \ - "if fstype ${devtype} " \ - "${devnum}:${distro_bootpart} " \ - "bootfstype; then " \ - "run scan_dev_for_boot; " \ - "fi; " \ - "done\0" \ - "scan_dev_for_boot=" \ - "echo Scanning ${devtype} " \ - "${devnum}:${distro_bootpart}...; " \ - "for prefix in ${boot_prefixes}; do " \ - "run scan_dev_for_scripts; " \ - "done;" \ - "\0" \ - "boot_a_script=" \ - "load ${devtype} ${devnum}:${distro_bootpart} " \ - "${scriptaddr} ${prefix}${script}; " \ - "env exists secureboot && load ${devtype} " \ - "${devnum}:${distro_bootpart} " \ - "${scripthdraddr} ${prefix}${boot_script_hdr} " \ - "&& esbc_validate ${scripthdraddr};" \ - "source ${scriptaddr}\0" \ - "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \ - "sf probe 0:0 && sf read $load_addr " \ - "$kernel_start $kernel_size ; env exists secureboot &&" \ - "sf read $kernelheader_addr_r $kernelheader_start " \ - "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\ - " bootm $load_addr#$board\0" \ - "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \ - "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \ - "&& hdp load $load_addr 0x2000\0" \ - "sd_bootcmd=echo Trying load from SD ...;" \ - "mmcinfo; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ - "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ - " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" \ - "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \ - "mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ - "&& hdp load $load_addr 0x2000\0" \ - "emmc_bootcmd=echo Trying load from EMMC ..;" \ - "mmcinfo; mmc dev 1; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ - "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ - " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" \ - "emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \ - "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \ - "&& hdp load $load_addr 0x2000\0" - #undef CONFIG_BOOTCOMMAND #define XSPI_NOR_BOOTCOMMAND \ |