mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.

Signed-off-by: Heiko Schocher <hs@denx.de>

1 files changed, 376 insertions, 0 deletions

diff --git a/include/configs/mucmc52.h b/include/configs/mucmc52.h
new file mode 100644
index 0000000000..18200ec814
--- /dev/null
+++ b/include/configs/mucmc52.h
@@ -0,0 +1,376 @@
+/*
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define	CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU		*/
+#define	CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU)	*/
+#define	CONFIG_MUCMC52		1	/* MUCMC52 board			*/
+
+#define	CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
+
+#define	BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
+#define	BOOTFLAG_WARM		0x02	/* Software reboot			*/
+
+#define	CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define	CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+#define	CONFIG_BOARD_EARLY_INIT_R
+
+#define	CONFIG_LAST_STAGE_INIT
+
+#define	CONFIG_HIGH_BATS	1	/* High BATs supported			*/
+/*
+ * Serial console configuration
+ */
+#define	CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
+#define	CONFIG_BAUDRATE		38400	/* ... at 38400 bps	*/
+#define	CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/* Partitions */
+#define	CONFIG_DOS_PARTITION
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define	CONFIG_CMD_DATE
+#define	CONFIG_CMD_DISPLAY
+#define	CONFIG_CMD_DHCP
+#define	CONFIG_CMD_EEPROM
+#define	CONFIG_CMD_FAT
+#define	CONFIG_CMD_I2C
+#define	CONFIG_CMD_DTT
+#define	CONFIG_CMD_IDE
+#define	CONFIG_CMD_MII
+#define	CONFIG_CMD_NFS
+#define	CONFIG_CMD_PCI
+#define	CONFIG_CMD_PING
+#define	CONFIG_CMD_SNTP
+
+#define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
+
+#if (TEXT_BASE == 0xFFF00000) /* Boot low */
+#   define	CFG_LOWBOOT		1
+#endif
+
+/*
+ * Autobooting
+ */
+#define	CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+
+#define	CONFIG_PREBOOT	"echo;" \
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm ${kernel_addr}\0"				\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"rootpath=/opt/eldk/ppc_82xx\0"					\
+	""
+
+#define	CONFIG_BOOTCOMMAND	"run net_nfs"
+
+#define	CONFIG_MISC_INIT_R	1
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#undef	CFG_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+
+/*
+ * I2C configuration
+ */
+#define	CONFIG_HARD_I2C		1	/* I2C with hardware support */
+#define	CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+
+#define	CFG_I2C_SPEED		100000 /* 100 kHz */
+#define	CFG_I2C_SLAVE		0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define	CFG_I2C_EEPROM_ADDR		0x58
+#define	CFG_I2C_EEPROM_ADDR_LEN		1
+#define	CFG_EEPROM_PAGE_WRITE_BITS	4
+#define	CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+/* for LM81 */
+#define	CFG_EEPROM_PAGE_WRITE_ENABLE
+
+/*
+ * RTC configuration
+ */
+#define	CONFIG_RTC_PCF8563
+#define	CFG_I2C_RTC_ADDR		0x51
+
+/* I2C SYSMON (LM75) */
+#define	CONFIG_DTT_LM81			1	/* ON Semi's LM75		*/
+#define	CONFIG_DTT_SENSORS		{0}	/* Sensor addresses		*/
+#define	CFG_DTT_MAX_TEMP		70
+#define	CFG_DTT_LOW_TEMP		-30
+#define	CFG_DTT_HYSTERESIS		3
+
+/*
+ * Flash configuration
+ */
+#define	CFG_FLASH_BASE		0xFF800000
+
+#define	CFG_FLASH_SIZE		0x00800000 /* 8 MByte */
+#define	CFG_MAX_FLASH_SECT	67	/* max num of sects on one chip */
+
+#define	CFG_ENV_ADDR		(TEXT_BASE+0x40000) /* second sector */
+#define	CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
+					   (= chip selects) */
+#define	CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define	CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+
+#define	CONFIG_FLASH_CFI_DRIVER
+#define	CFG_FLASH_CFI
+#define	CFG_FLASH_EMPTY_INFO
+#define	CFG_FLASH_CFI_AMD_RESET
+
+/*
+ * Environment settings
+ */
+#define	CFG_ENV_IS_IN_FLASH	1
+#define	CFG_ENV_SIZE		0x4000
+#define	CFG_ENV_SECT_SIZE	0x20000
+#define	CFG_ENV_OFFSET_REDUND   (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
+
+/*
+ * Memory map
+ */
+#define	CFG_MBAR		0xF0000000
+#define	CFG_SDRAM_BASE		0x00000000
+#define	CFG_DEFAULT_MBAR	0x80000000
+#define	CFG_DISPLAY_BASE	0x80600000
+#define	CFG_STATUS1_BASE	0x80600200
+#define	CFG_STATUS2_BASE	0x80600300
+#define	CFG_PMI_UNI_BASE	0x80800000
+#define	CFG_PMI_BROAD_BASE	0x80810000
+
+/* Settings for XLB = 132 MHz */
+#define	SDRAM_DDR	 1
+#define	SDRAM_MODE      0x018D0000
+#define	SDRAM_EMODE     0x40090000
+#define	SDRAM_CONTROL   0x714f0f00
+#define	SDRAM_CONFIG1   0x73722930
+#define	SDRAM_CONFIG2   0x47770000
+#define	SDRAM_TAPDELAY  0x10000000
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define	CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define	CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#else
+#define	CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#endif
+
+#define	CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define	CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define	CFG_MONITOR_BASE	TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define	CFG_RAMBOOT	1
+#endif
+
+#define	CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define	CFG_MALLOC_LEN		(512 << 10)	/* Reserve 128 kB for malloc()	*/
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define	CONFIG_MPC5xxx_FEC	1
+#define	CONFIG_PHY_ADDR		0x00
+#define	CONFIG_MII		1		/* MII PHY management		*/
+
+/*
+ * GPIO configuration
+ */
+#define	CFG_GPS_PORT_CONFIG	0x8D550644
+
+/*use  Hardware WDT */
+#define CONFIG_HW_WATCHDOG
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP			/* undef to save memory	    */
+#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#else
+#define	CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#endif
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		16	/* max number of command args	*/
+#define	CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+/* Enable an alternate, more extensive memory test */
+#define	CFG_ALT_MEMTEST
+
+#define	CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define	CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+
+#define	CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define	CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+/*
+ * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
+ * which is normally part of the default commands (CFV_CMD_DFL)
+ */
+#define	CONFIG_LOOPW
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define	CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+#define	CFG_HID0_FINAL		HID0_ICE
+#else
+#define	CFG_HID0_INIT		0
+#define	CFG_HID0_FINAL		0
+#endif
+
+#define	CFG_BOOTCS_START	CFG_FLASH_BASE
+#define	CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
+#define	CFG_BOOTCS_CFG		0x0004FB00
+#define	CFG_CS0_START		CFG_FLASH_BASE
+#define	CFG_CS0_SIZE		CFG_FLASH_SIZE
+
+/* 8Mbit SRAM @0x80100000 */
+#define	CFG_CS1_START		0x80100000
+#define	CFG_CS1_SIZE		0x00100000
+#define	CFG_CS1_CFG		0x00019B00
+
+/* FRAM 32Kbyte @0x80700000 */
+#define	CFG_CS2_START		0x80700000
+#define	CFG_CS2_SIZE		0x00008000
+#define	CFG_CS2_CFG		0x00019800
+
+/* Display H1, Status Inputs, EPLD @0x80600000 */
+#define	CFG_CS3_START		0x80600000
+#define	CFG_CS3_SIZE		0x00100000
+#define	CFG_CS3_CFG		0x00019800
+
+/* PMI Unicast 32Kbyte @0x80800000 */
+#define	CFG_CS6_START		CFG_PMI_UNI_BASE
+#define	CFG_CS6_SIZE		0x00008000
+#define	CFG_CS6_CFG		0xFFFFF930
+
+/* PMI Broadcast 32Kbyte @0x80810000 */
+#define	CFG_CS7_START		CFG_PMI_BROAD_BASE
+#define	CFG_CS7_SIZE		0x00008000
+#define	CFG_CS7_CFG		0xFF00F930
+
+#define	CFG_CS_BURST		0x00000000
+#define	CFG_CS_DEADCYCLE	0x33333333
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef	CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card	Adapter	*/
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
+#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
+
+#define	CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define	CFG_IDE_MAXDEVICE	1	/* max. 2 drives per IDE bus	*/
+
+#define	CONFIG_IDE_PREINIT	1
+
+#define	CFG_ATA_IDE0_OFFSET	0x0000
+
+#define	CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+
+/* Offset for data I/O			*/
+#define	CFG_ATA_DATA_OFFSET	(0x0060)
+
+/* Offset for normal register accesses	*/
+#define	CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers	*/
+#define	CFG_ATA_ALT_OFFSET	(0x005C)
+
+/* Interval between registers           */
+#define	CFG_ATA_STRIDE          4
+
+#define	CONFIG_ATAPI            1
+
+/*
+ * PCI Mapping:
+ * 0x40000000 - 0x4fffffff - PCI Memory
+ * 0x50000000 - 0x50ffffff - PCI IO Space
+ */
+#define	CONFIG_PCI		1
+#define	CONFIG_PCI_PNP		1
+#define	CONFIG_PCI_SCAN_SHOW	1
+#define	CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1
+
+#define	CONFIG_PCI_MEM_BUS	0x40000000
+#define	CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
+#define	CONFIG_PCI_MEM_SIZE	0x10000000
+
+#define	CONFIG_PCI_IO_BUS	0x50000000
+#define	CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
+#define	CONFIG_PCI_IO_SIZE	0x01000000
+
+#define	CFG_ISA_IO		CONFIG_PCI_IO_BUS
+
+/*---------------------------------------------------------------------*/
+/* Display addresses						       */
+/*---------------------------------------------------------------------*/
+
+#define	CFG_DISP_CHR_RAM	(CFG_DISPLAY_BASE + 0x38)
+#define	CFG_DISP_CWORD		(CFG_DISPLAY_BASE + 0x30)
+
+#endif /* __CONFIG_H */