summaryrefslogtreecommitdiff
path: root/include/configs/mx6memcal.h
diff options
context:
space:
mode:
authorEric Nelson <eric@nelint.com>2017-12-11 13:52:11 -0200
committerStefano Babic <sbabic@denx.de>2018-01-03 13:58:51 +0100
commitbaefb63a13d106458577704ca4586b3f414c9520 (patch)
treec2dc6a64124d1e7ff4e0d8ac90da7542e9f65e63 /include/configs/mx6memcal.h
parent1314bd1192b4c67d28bdae7eee639588e88090cd (diff)
mx6: Add board mx6memcal for use in validating DDR
This is a virtual "board" that uses configuration files and Kconfig to define the memory layout used by a real board during the board bring-up process. It generates an SPL image that can be loaded using imx_usb or SB_LOADER.exe. When run, it will generate a set of calibration constants for use in either or both a DCD configuration file for boards that use u-boot.imx or struct mx6_mmdc_calibration for boards that boot via SPL. In essence, it is a configurable, open-source variant of the Freescale ddr-stress tool. https://community.nxp.com/docs/DOC-105652 File mx6memcal_defconfig configures the board for use with mx6sabresd or mx6qsabreauto. Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Diffstat (limited to 'include/configs/mx6memcal.h')
-rw-r--r--include/configs/mx6memcal.h59
1 files changed, 59 insertions, 0 deletions
diff --git a/include/configs/mx6memcal.h b/include/configs/mx6memcal.h
new file mode 100644
index 0000000000..f5238a52f5
--- /dev/null
+++ b/include/configs/mx6memcal.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the Boundary Devices Nitrogen6X
+ * and Freescale i.MX6Q Sabre Lite boards.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* SPL */
+
+#include "mx6_common.h"
+#include "imx6_spl.h"
+
+#undef CONFIG_FSL_ESDHC
+#undef CONFIG_MMC
+#undef CONFIG_SPL_MMC_SUPPORT
+#undef CONFIG_GENERIC_MMC
+#undef CONFIG_CMD_FUSE
+
+#define CONFIG_SYS_MEMTEST_START 0x10000000
+#define CONFIG_SYS_MEMTEST_END 0x20000000
+#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
+
+#define CONFIG_MXC_UART
+#ifdef CONFIG_SERIAL_CONSOLE_UART1
+#if defined(CONFIG_MX6SL)
+#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
+#else
+#define CONFIG_MXC_UART_BASE UART1_BASE
+#endif
+#elif defined(CONFIG_SERIAL_CONSOLE_UART2)
+#define CONFIG_MXC_UART_BASE UART2_BASE
+#else
+#error please define serial console (CONFIG_SERIAL_CONSOLE_UARTx)
+#endif
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16)
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+
+#endif /* __CONFIG_H */