at91: add support for the PM9263 board of Ronetix GmbH

The PM9263 board is based on the AT91SAM9263-EK board.

Here is the page on Ronetix website:
http://www.ronetix.at/starter_kit_9263.html

Signed-off-by: Ilko Iliev <iliev@ronetix.at>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 367 insertions, 0 deletions

diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
new file mode 100644
index 0000000000..9ae737f401
--- /dev/null
+++ b/include/configs/pm9263.h
@@ -0,0 +1,367 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * Ilko Iliev <www.ronetix.at>
+ *
+ * Configuation settings for the RONETIX PM9263 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_CPU_NAME		"AT91SAM9263"
+
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define MASTER_PLL_DIV		15
+#define MASTER_PLL_MUL		162
+#define MAIN_PLL_DIV		2	/* 2 or 4 */
+#define AT91_MAIN_CLOCK	18432000
+
+#define CONFIG_SYS_HZ		1000000
+
+#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
+#define CONFIG_AT91SAM9263	1	/* It's an Atmel AT91SAM9263 SoC*/
+#define CONFIG_PM9263		1	/* on a Ronetix PM9263 Board	*/
+#define CONFIG_ARCH_CPU_INIT
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+
+/* clocks */
+#define CONFIG_SYS_MOR_VAL	0x00002001	/* CKGR_MOR - enable main osc. */
+#define CONFIG_SYS_PLLAR_VAL	\
+		(0x2000BF00 | ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
+
+#if (MAIN_PLL_DIV == 2)
+/* PCK/2 = MCK Master Clock from PLLA */
+#define CONFIG_SYS_MCKR1_VAL		0x00000100
+/* PCK/2 = MCK Master Clock from PLLA */
+#define CONFIG_SYS_MCKR2_VAL		0x00000102
+#else
+/* PCK/4 = MCK Master Clock from PLLA */
+#define CONFIG_SYS_MCKR1_VAL		0x00000200
+/* PCK/4 = MCK Master Clock from PLLA */
+#define CONFIG_SYS_MCKR2_VAL		0x00000202
+#endif
+/* define PDC[31:16] as DATA[31:16] */
+#define CONFIG_SYS_PIOD_PDR_VAL1	0xFFFF0000
+/* no pull-up for D[31:16] */
+#define CONFIG_SYS_PIOD_PPUDR_VAL	0xFFFF0000
+/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
+#define CONFIG_SYS_MATRIX_EBI0CSA_VAL	0x0001010A
+/* EBI1_CSA, 3.3v, no pull-ups */
+#define CONFIG_SYS_MATRIX_EBI1CSA_VAL	0x00010100
+
+/* SDRAM */
+/* SDRAMC_MR Mode register */
+#define CONFIG_SYS_SDRC_MR_VAL1		0
+/* SDRAMC_TR - Refresh Timer register */
+#define CONFIG_SYS_SDRC_TR_VAL1		0x13C
+#define CONFIG_SYS_SDRC_CR_VAL		0x85227279	/*CL3*/
+/* Memory Device Register -> SDRAM */
+#define CONFIG_SYS_SDRC_MDR_VAL		0
+#define CONFIG_SYS_SDRC_MR_VAL2		0x00000002	/* SDRAMC_MR */
+#define CONFIG_SYS_SDRAM_VAL1		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL3		4		/* SDRC_MR */
+#define CONFIG_SYS_SDRAM_VAL2		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL3		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL4		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL5		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL6		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL7		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL8		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRAM_VAL9		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL4		3		/* SDRC_MR */
+#define CONFIG_SYS_SDRAM_VAL10		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_MR_VAL5		0		/* SDRC_MR */
+#define CONFIG_SYS_SDRAM_VAL11		0		/* SDRAM_BASE */
+#define CONFIG_SYS_SDRC_TR_VAL2		1200		/* SDRAM_TR */
+#define CONFIG_SYS_SDRAM_VAL12		0		/* SDRAM_BASE */
+
+/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
+#define CONFIG_SYS_SMC0_SETUP0_VAL	0x0A0A0A0A	/* SMC_SETUP */
+#define CONFIG_SYS_SMC0_PULSE0_VAL	0x0B0B0B0B	/* SMC_PULSE */
+#define CONFIG_SYS_SMC0_CYCLE0_VAL	0x00160016	/* SMC_CYCLE */
+#define CONFIG_SYS_SMC0_CTRL0_VAL	0x00161003	/* SMC_MODE */
+
+/* setup SMC1, CS0 (PSRAM) - 16-bit */
+#define CONFIG_SYS_SMC1_SETUP0_VAL	0x00000000	/* SMC_SETUP */
+#define CONFIG_SYS_SMC1_PULSE0_VAL	0x07020707	/* SMC_PULSE */
+#define CONFIG_SYS_SMC1_CYCLE0_VAL	0x00080008	/* SMC_CYCLE */
+#define CONFIG_SYS_SMC1_CTRL0_VAL	0x31001000	/* SMC_MODE */
+
+#define CONFIG_SYS_RSTC_RMR_VAL		0xA5000301	/* user reset enable */
+
+/* Watchdog */
+#define CONFIG_SYS_WDTC_WDMR_VAL	0x3fff8fff	/* disable watchdog */
+
+/* */
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+#undef CONFIG_SKIP_LOWLEVEL_INIT
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+#define CONFIG_USER_LOWLEVEL_INIT	1
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART	1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD			1
+#define LCD_BPP				LCD_COLOR8
+#define CONFIG_LCD_LOGO			1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO			1
+#define CONFIG_LCD_INFO_BELOW_LOGO	1
+#define CONFIG_SYS_WHITE_ON_BLACK	1
+#define CONFIG_ATMEL_LCD		1
+#define CONFIG_ATMEL_LCD_BGR555		1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+
+#define CONFIG_LCD_IN_PSRAM		1
+
+/* LED */
+#define CONFIG_AT91_LED
+#define	CONFIG_RED_LED		AT91_PIN_PB7	/* this is the power led */
+#define	CONFIG_GREEN_LED	AT91_PIN_PB8	/* this is the user1 led */
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE	1
+#define CONFIG_BOOTP_BOOTPATH		1
+#define CONFIG_BOOTP_GATEWAY		1
+#define CONFIG_BOOTP_HOSTNAME		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING		1
+#define CONFIG_CMD_DHCP		1
+#define CONFIG_CMD_NAND		1
+#define CONFIG_CMD_USB		1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS	1
+#define PHYS_SDRAM		0x20000000
+#define PHYS_SDRAM_SIZE		0x04000000	/* 64 megs */
+
+/* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
+#define CONFIG_HAS_DATAFLASH			1
+#define CONFIG_SYS_SPI_WRITE_TOUT		(5 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
+#define AT91_SPI_CLK				15000000
+#define DATAFLASH_TCSS				(0x1a << 16)
+#define DATAFLASH_TCHS				(0x1 << 24)
+
+/* NOR flash, if populated */
+#define CONFIG_SYS_FLASH_CFI		1
+#define CONFIG_FLASH_CFI_DRIVER		1
+#define PHYS_FLASH_1			0x10000000
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_SECT	256
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_NAND_MAX_CHIPS	1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+#define CONFIG_SYS_NAND_DBW_8		1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD15
+#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PB30
+#endif
+
+#define CONFIG_CMD_JFFS2		1
+#define CONFIG_JFFS2_CMDLINE		1
+#define CONFIG_JFFS2_NAND		1
+#define CONFIG_JFFS2_DEV		"nand0" /* NAND device jffs2 lives on */
+#define CONFIG_JFFS2_PART_OFFSET	0	/* start of jffs2 partition */
+#define CONFIG_JFFS2_PART_SIZE		(256 * 1024 * 1024) /* partition size*/
+
+/* PSRAM */
+#define	PHYS_PSRAM			0x70000000
+#define	PHYS_PSRAM_SIZE			0x00400000	/* 4MB */
+
+/* Ethernet */
+#define CONFIG_MACB			1
+#define CONFIG_RMII			1
+#define CONFIG_NET_MULTI		1
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_RESET_PHY_R		1
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW			1
+#define CONFIG_DOS_PARTITION			1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00a00000	/* AT91SAM9263_UHP_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9263"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE			1
+
+#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
+
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			0x23e00000
+
+#define CONFIG_SYS_USE_FLASH	1
+#undef CONFIG_SYS_USE_DATAFLASH
+#undef CONFIG_SYS_USE_NANDFLASH
+
+#ifdef CONFIG_SYS_USE_DATAFLASH
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_DATAFLASH
+#define CFG_MONITOR_BASE	(CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CONFIG_ENV_OFFSET	0x4200
+#define CONFIG_ENV_ADDR		(CFG_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
+#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+				"root=/dev/mtdblock0 " \
+				"mtdparts=at91_nand:-(root) "\
+				"rw rootfstype=jffs2"
+
+#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET		0x60000
+#define CONFIG_ENV_OFFSET_REDUND	0x80000
+#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 "		\
+				"root=/dev/mtdblock5 "		\
+				"mtdparts=at91_nand:"		\
+					"128k(bootstrap)ro,"	\
+					"256k(uboot)ro,"	\
+					"128k(env1)ro,"		\
+					"128k(env2)ro,"		\
+					"2M(linux),"		\
+					"-(root) "		\
+				"rw rootfstype=jffs2"
+
+#elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */
+
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_OFFSET	0x40000
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#define	CONFIG_ENV_SIZE		0x10000
+#define CONFIG_ENV_OVERWRITE	1
+
+/* JFFS Partition offset set */
+#define CONFIG_SYS_JFFS2_FIRST_BANK	0
+#define CONFIG_SYS_JFFS2_NUM_BANKS	1
+
+/* 512k reserved for u-boot */
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR	11
+
+#define CONFIG_BOOTCOMMAND		"run flashboot"
+#define CONFIG_ROOTPATH			/ronetix/rootfs
+#define CONFIG_AUTOBOOT_PROMPT		"autoboot in %d seconds\n"
+
+#define CONFIG_CON_ROT			"fbcon=rotate:3 "
+#define CONFIG_BOOTARGS			"root=/dev/mtdblock4 rootfstype=jffs2 "\
+					CONFIG_CON_ROT
+
+#define MTDIDS_DEFAULT			"nor0=physmap-flash.0,nand0=nand"
+#define MTDPARTS_DEFAULT		\
+	"mtdparts=physmap-flash.0:"	\
+		"256k(u-boot)ro,"	\
+		"64k(u-boot-env)ro,"	\
+		"1408k(kernel),"	\
+		"-(rootfs);"		\
+	"nand:-(nand)"
+
+#define CONFIG_EXTRA_ENV_SETTINGS				\
+	"mtdids=" MTDIDS_DEFAULT "\0"				\
+	"mtdparts=" MTDPARTS_DEFAULT "\0"			\
+	"partition=nand0,0\0"					\
+	"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0"	\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "		\
+		CONFIG_CON_ROT					\
+		"nfsroot=$(serverip):$(rootpath) $(mtdparts)\0"	\
+	"addip=setenv bootargs $(bootargs) "			\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
+		":$(hostname):eth0:off\0"			\
+	"ramboot=tftpboot 0x22000000 vmImage;"			\
+		"run ramargs;run addip;bootm 22000000\0"	\
+	"nfsboot=tftpboot 0x22000000 vmImage;"			\
+		"run nfsargs;run addip;bootm 22000000\0"	\
+	"flashboot=run ramargs;run addip;bootm 0x10050000\0"	\
+	""
+
+#else
+#error "Undefined memory device"
+#endif
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT		"u-boot-pm9263> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		\
+		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING		1
+
+#define ROUND(A, B)			(((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE		(32 * 1024)	/* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif