diff options
author | Tom McLeod <tom.mcleod@opalkelly.com> | 2017-09-27 17:53:26 -0700 |
---|---|---|
committer | Michal Simek <michal.simek@xilinx.com> | 2017-11-28 15:53:07 +0100 |
commit | 413ab5b0e1b88057e472ea63eb05b00eee9cf6b1 (patch) | |
tree | 9f522e34581bb6434ce349adaa3b99d4e99cd1fd /include/configs/syzygy_hub.h | |
parent | 549d684d4ef2d4fcfe4f5b9b3eb3954270e7e4a4 (diff) |
arm: zynq: Add support for SYZYGY Hub board
Add the Zynq-based SYZYGY Hub board from Opal Kelly. The board
contains a Xilinx Zynq xc7z012s SoC, 1GB DDR3 RAM, and supports
booting from SD.
Signed-off-by: Tom McLeod <tom.mcleod@opalkelly.com>
Cc: Michal Simek <monstr@monstr.eu>
CC: Albert Aribaud <albert.u.boot@aribaud.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Diffstat (limited to 'include/configs/syzygy_hub.h')
-rw-r--r-- | include/configs/syzygy_hub.h | 72 |
1 files changed, 72 insertions, 0 deletions
diff --git a/include/configs/syzygy_hub.h b/include/configs/syzygy_hub.h new file mode 100644 index 0000000000..4147b45ef0 --- /dev/null +++ b/include/configs/syzygy_hub.h @@ -0,0 +1,72 @@ +/* + * (C) Copyright 2012 Xilinx + * (C) Copyright 2017 Opal Kelly Inc. + * + * Configuration settings for the SYZYGY Hub development board + * See zynq-common.h for Zynq common configs + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_SYZYGY_HUB_H +#define __CONFIG_SYZYGY_HUB_H + +#define CONFIG_ZYNQ_I2C1 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_ZYNQ_GEM_EEPROM_ADDR 0x57 +#define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET 0xFA + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fit_image=fit.itb\0" \ + "bitstream_image=download.bit\0" \ + "loadbit_addr=0x1000000\0" \ + "load_addr=0x2000000\0" \ + "fit_size=0x800000\0" \ + "flash_off=0x100000\0" \ + "nor_flash_off=0xE2100000\0" \ + "fdt_high=0x20000000\0" \ + "initrd_high=0x20000000\0" \ + "loadbootenv_addr=0x2000000\0" \ + "fdt_addr_r=0x1f00000\0" \ + "pxefile_addr_r=0x2000000\0" \ + "kernel_addr_r=0x2000000\0" \ + "scriptaddr=0x3000000\0" \ + "ramdisk_addr_r=0x3100000\0" \ + "bootenv=uEnv.txt\0" \ + "bootenv_dev=mmc\0" \ + "loadbootenv=load ${bootenv_dev} 0 ${loadbootenv_addr} ${bootenv}\0" \ + "importbootenv=echo Importing environment from ${bootenv_dev} ...; " \ + "env import -t ${loadbootenv_addr} $filesize\0" \ + "bootenv_existence_test=test -e ${bootenv_dev} 0 /${bootenv}\0" \ + "setbootenv=if env run bootenv_existence_test; then " \ + "if env run loadbootenv; then " \ + "env run importbootenv; " \ + "fi; " \ + "fi; \0" \ + "sd_loadbootenv=set bootenv_dev mmc && " \ + "run setbootenv \0" \ + "usb_loadbootenv=set bootenv_dev usb && usb start && run setbootenv\0" \ + "preboot=if test $modeboot = sdboot; then " \ + "run sd_loadbootenv; " \ + "echo Checking if uenvcmd is set ...; " \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...; " \ + "run uenvcmd; " \ + "fi; " \ + "fi; \0" \ + "sdboot=echo Copying FPGA Bitstream from SD to RAM... && " \ + "load mmc 0 ${loadbit_addr} ${bitstream_image} && " \ + "echo Programming FPGA... && " \ + "fpga loadb 0 ${loadbit_addr} ${filesize} && " \ + "echo Copying FIT from SD to RAM... && " \ + "load mmc 0 ${load_addr} ${fit_image} && " \ + "bootm ${load_addr}\0" \ + "jtagboot=echo TFTPing FIT to RAM... && " \ + "tftpboot ${load_addr} ${fit_image} && " \ + "bootm ${load_addr}\0" \ + DFU_ALT_INFO \ + BOOTENV + +#include <configs/zynq-common.h> + +#endif /* __CONFIG_SYZYGY_HUB_H */ |