arm: udoo: Convert to distro config

Instead of keeping a custom environment, use a more generic approach
by switching to distro config.

Signed-off-by: Dirk Meul <dirk.meul@rwth-aachen.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>

1 files changed, 23 insertions, 89 deletions

diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index 985f306813..3378b4a601 100644
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -45,100 +45,34 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"script=boot.scr\0" \
-	"image=zImage\0" \
-	"console=ttymxc1\0" \
-	"splashpos=m,m\0" \
+	"console=ttymxc1,115200\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
-	"fdt_file=undefined\0" \
+	"fdtfile=undefined\0" \
 	"fdt_addr=0x18000000\0" \
-	"boot_fdt=try\0" \
+	"fdt_addr_r=0x18000000\0" \
 	"ip_dyn=yes\0" \
 	"mmcdev=0\0" \
-	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
-	"update_sd_firmware_filename=u-boot.imx\0" \
-	"update_sd_firmware=" \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"if mmc dev ${mmcdev}; then "	\
-			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
-				"setexpr fw_sz ${filesize} / 0x200; " \
-				"setexpr fw_sz ${fw_sz} + 1; "	\
-				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
-			"fi; "	\
-		"fi\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} " \
-		"root=${mmcroot}\0" \
-	"loadbootscript=" \
-		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
-	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if run loadfdt; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} " \
-		"root=/dev/nfs " \
-	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-		"netboot=echo Booting from net ...; " \
-		"run netargs; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${image}; " \
-		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
-			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootz ${loadaddr} - ${fdt_addr}; " \
-			"else " \
-				"if test ${boot_fdt} = try; then " \
-					"bootz; " \
-				"else " \
-					"echo WARN: Cannot load the DT; " \
-				"fi; " \
-			"fi; " \
-		"else " \
-			"bootz; " \
-		"fi;\0" \
-		"findfdt=" \
-			"if test $board_rev = MX6Q ; then " \
-				"setenv fdt_file imx6q-udoo.dtb; fi; " \
-			"if test $board_rev = MX6DL ; then " \
-				"setenv fdt_file imx6dl-udoo.dtb; fi; " \
-			"if test $fdt_file = undefined; then " \
-				"echo WARNING: Could not determine dtb to use; fi; \0"
-
-#define CONFIG_BOOTCOMMAND \
-	   "run findfdt; " \
-	   "mmc dev ${mmcdev}; if mmc rescan; then " \
-		   "if run loadbootscript; then " \
-			   "run bootscript; " \
-		   "else " \
-			   "if run loadimage; then " \
-				   "run mmcboot; " \
-			   "else run netboot; " \
-			   "fi; " \
-		   "fi; " \
-	   "else run netboot; fi"
+	"mmcrootfstype=ext4\0" \
+	"findfdt="\
+		"if test ${board_rev} = MX6Q; then " \
+			"setenv fdtfile imx6q-udoo.dtb; fi; " \
+		"if test ${board_rev} = MX6DL; then " \
+			"setenv fdtfile imx6dl-udoo.dtb; fi; " \
+		"if test ${fdtfile} = undefined; then " \
+			"echo WARNING: Could not determine dtb to use; fi\0" \
+	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"ramdisk_addr_r=0x13000000\0" \
+	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+	BOOTENV
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(SATA, sata, 0) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
 
 /* Physical Memory Map */
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR