ppc, 8xx: remove obsolete km8xx boards from keymile

The MPC852 based mgsuvd and kmsupx4 boards from keymile
were initially ported but later on not developed further. So
the respective files were removed to avoid unneeded merging
and maintenance.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Acked-by: Heiko Schocher<hs@denx.de>

3 files changed, 0 insertions, 415 deletions

diff --git a/include/configs/km8xx.h b/include/configs/km8xx.h
deleted file mode 100644
index 7683fe542e..0000000000
--- a/include/configs/km8xx.h
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * (C) Copyright 2009
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * configuration options, keymile 8xx board specific
- */
-
-#ifndef __CONFIG_KM8XX_H
-#define __CONFIG_KM8XX_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_KM8XX		1	/* on a km8xx board */
-
-/* include common defines/options for all Keymile boards */
-#include "keymile-common.h"
-
-#if defined(CONFIG_KMSUPX4)
-#undef	CONFIG_I2C_MUX			/* no I2C mux on this board */
-#endif
-
-#define CONFIG_8xx_GCLK_FREQ		66000000
-
-#define CONFIG_SYS_SMC_UCODE_PATCH	1	/* Relocate SMC1 */
-#define CONFIG_SYS_SMC_DPMEM_OFFSET	0x1fc0
-#define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1 */
-#define CONFIG_SYS_SMC_RXBUFLEN	128
-#define CONFIG_SYS_MAXIDLE	10
-
-#define CONFIG_SYS_CPM_BOOTCOUNT_ADDR	0x1eb0	/* In case of SMC relocation,
-						 * the default value is not
-						 * working
-						 */
-
-#define BOOTFLASH_START	F0000000
-#define CONFIG_PRAM	512	/* protected RAM [KBytes] */
-
-#define CONFIG_PREBOOT	"echo;" \
-	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-	"echo"
-
-#define BOOTFLASH_START	F0000000
-#define CONFIG_PRAM	512	/* protected RAM [KBytes] */
-
-#if defined(CONFIG_MGSUVD)
-#define CONFIG_ENV_IVM	"EEprom_ivm=pca9544a:70:4 \0"
-#else
-#define CONFIG_ENV_IVM	""
-#endif
-
-#define MTDIDS_DEFAULT		"nor0=app"
-#define MTDPARTS_DEFAULT \
-	"mtdparts=app:384k(u-boot),128k(env),128k(envred),128k(free),"	\
-	"1536k(esw0),8704k(rootfs0),1536k(esw1),2432k(rootfs1),640k(var)," \
-	"768k(cfg)"
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	CONFIG_KM_DEF_ENV						\
-	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"addcon=setenv bootargs ${bootargs} "				\
-		"console=ttyCPM0,${baudrate}\0"				\
-	"mtdids=nor0=app \0"						\
-	"mtdparts=" MK_STR(MTDPARTS_DEFAULT) "\0"			\
-	"partition=nor0,9 \0"						\
-	"new_env=prot off F0060000 F009FFFF; era F0060000 F009FFFF \0" 	\
-	CONFIG_ENV_IVM							\
-	""
-
-#undef CONFIG_RTC_MPC8xx		/* MPC866 does not support RTC	*/
-
-#define	CONFIG_TIMESTAMP		/* but print image timestmps	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0xf0000000
-#define CONFIG_SYS_MONITOR_LEN		(384 << 10) /* 384 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_FLASH_SIZE		32
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-/* max num of sects on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT	256
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET	CONFIG_SYS_MONITOR_LEN
-#define CONFIG_ENV_SECT_SIZE	0x20000 /* Total Size of Environment Sector */
-
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
-#define CONFIG_ENV_BUFFER_PRINT		1
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#define CONFIG_SYS_SYPCR	0xffffff89
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- */
-#if defined(CONFIG_MGSUVD)
-#define CONFIG_SYS_SIUMCR	0x00610480
-#else
-#define CONFIG_SYS_SIUMCR	0x00610400
-#endif
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#if defined(CONFIG_MGSUVD)
-#define SCCR_MASK	0x01800000
-#else
-#define SCCR_MASK	0x00000000
-#endif
-#define CONFIG_SYS_SCCR	0x01800000
-
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0xf0000000	/* FLASH bank #0	*/
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
-
-/*
- * FLASH timing: Default value of OR0 after reset
- */
-#define CONFIG_SYS_OR0_PRELIM	0xfe000954
-#define CONFIG_SYS_BR0_PRELIM	0xf0000401
-
-/*
- * BR1 and OR1 (SDRAM)
- *
- */
-#define SDRAM_BASE1_PRELIM	0x00000000	/* SDRAM bank #0	*/
-#define SDRAM_MAX_SIZE		(64 << 20)	/* max 64 MB per bank	*/
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
-#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
-
-#define CONFIG_SYS_OR1_PRELIM	0xfc000800
-#define CONFIG_SYS_BR1_PRELIM	(0x000000C0 | 0x01)
-
-#define CONFIG_SYS_MPTPR	0x0200
-/* PTB=16, AMB=001, FIXME 1 RAS precharge cycles, 1 READ loop cycle (not used),
-   1 Write loop Cycle (not used), 1 Timer Loop Cycle */
-#if defined(CONFIG_MGSUVD)
-#define CONFIG_SYS_MBMR	0x10964111
-#else
-#define CONFIG_SYS_MBMR	0x20964111
-#endif
-#define CONFIG_SYS_MAR		0x00000088
-
-/*
- * 4096	Rows from SDRAM example configuration
- * 1000	factor s -> ms
- * 64	PTP (pre-divider from MPTPR) from SDRAM example configuration
- * 4	Number of refresh cycles per period
- * 64	Refresh cycle in ms per number of rows
- */
-#define CONFIG_SYS_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
-
-/* GPIO/PIGGY on CS3 initialization values
-*/
-#define CONFIG_SYS_PIGGY_BASE	(0x30000000)
-#if defined(CONFIG_MGSUVD)
-#define CONFIG_SYS_OR3_PRELIM	(0xfe000d24)
-#define CONFIG_SYS_BR3_PRELIM	(0x30000401)
-#else
-#define CONFIG_SYS_OR3_PRELIM	(0xf8000d26)
-#define CONFIG_SYS_BR3_PRELIM	(0x30000401)
-#endif
-
-#define CONFIG_SCC3_ENET
-#define CONFIG_ETHPRIME		"SCC"
-#define CONFIG_HAS_ETH0
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-
-#define OF_STDOUT_PATH		"/soc/cpm/serial@a80"
-
-/* enable I2C and select the hardware/software driver */
-#undef	CONFIG_HARD_I2C			/* I2C with hardware support */
-#define	CONFIG_SOFT_I2C		1	/* I2C bit-banged	*/
-/* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SPEED		50000
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define I2C_SOFT_DECLARATIONS
-
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define I2C_BASE_DIR	((u16 *)(CONFIG_SYS_PIGGY_BASE + 0x04))
-#define I2C_BASE_PORT	((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x09))
-
-#define SDA_BIT		0x40
-#define SCL_BIT		0x80
-#define SDA_CONF	0x1000
-#define SCL_CONF	0x2000
-
-#define I2C_ACTIVE	do {} while (0)
-#define I2C_TRISTATE	do {} while (0)
-#define I2C_READ	((in_8(I2C_BASE_PORT) & SDA_BIT) == SDA_BIT)
-#define I2C_SDA(bit)	if(bit) { \
-				clrbits(be16, I2C_BASE_DIR, SDA_CONF); \
-			} else { \
-				clrbits(8, I2C_BASE_PORT, SDA_BIT); \
-				setbits(be16, I2C_BASE_DIR, SDA_CONF); \
-			}
-#define I2C_SCL(bit)	if(bit) { \
-				clrbits(be16, I2C_BASE_DIR, SCL_CONF); \
-			} else { \
-				clrbits(8, I2C_BASE_PORT, SCL_BIT); \
-				setbits(be16, I2C_BASE_DIR, SCL_CONF); \
-			}
-#define I2C_DELAY	udelay(50)	/* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
-
-/* I2C SYSMON (LM75, AD7414 is almost compatible)		*/
-#define CONFIG_DTT_LM75		1	/* ON Semi's LM75	*/
-#if defined(CONFIG_MGSUVD)
-#define CONFIG_DTT_SENSORS	{0, 2, 4, 6}	/* Sensor addresses */
-#else
-#define CONFIG_DTT_SENSORS	{0}	/* Sensor addresses */
-#endif
-#define CONFIG_SYS_DTT_MAX_TEMP	70
-#define CONFIG_SYS_DTT_LOW_TEMP	-30
-#define CONFIG_SYS_DTT_HYSTERESIS	3
-#define CONFIG_SYS_DTT_BUS_NUM		(CONFIG_SYS_MAX_I2C_BUS)
-#endif	/* __CONFIG_KM8XX_H */
diff --git a/include/configs/kmsupx4.h b/include/configs/kmsupx4.h
deleted file mode 100644
index 228bdd7cf9..0000000000
--- a/include/configs/kmsupx4.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2009
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MPC852T		1	/* This is a MPC852T CPU	*/
-#define CONFIG_KMSUPX4		1	/* ...on a kmsupx4 board	*/
-#define CONFIG_HOSTNAME		kmsupx4
-
-#define	CONFIG_SYS_TEXT_BASE	0xf0000000
-
-/* include common defines/options for all Keymile 8xx boards */
-#include "km8xx.h"
-
-#define CONFIG_SYS_DELAYED_ICACHE	1	/* enable ICache not before
-						 * running in RAM.
-						 */
-#endif	/* __CONFIG_H */
diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h
deleted file mode 100644
index 6036da8b5e..0000000000
--- a/include/configs/mgsuvd.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2007
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MPC866		1	/* This is a MPC866 CPU		*/
-#define CONFIG_MGSUVD		1	/* ...on a mgsuvd board	*/
-#define CONFIG_HOSTNAME		mgsuvd
-
-#define	CONFIG_SYS_TEXT_BASE	0xf0000000
-
-/* include common defines/options for all Keymile 8xx boards */
-#include "km8xx.h"
-
-#endif	/* __CONFIG_H */