arm: Remove vpac270_nor_128 board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 325 deletions

diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
deleted file mode 100644
index 976ba5db74..0000000000
--- a/include/configs/vpac270.h
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * Voipac PXA270 configuration file
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef	__CONFIG_H
-#define	__CONFIG_H
-
-/*
- * High Level Board Configuration Options
- */
-#define	CONFIG_CPU_PXA27X		1	/* Marvell PXA270 CPU */
-#define	CONFIG_VPAC270		1	/* Voipac PXA270 board */
-#define	CONFIG_SYS_TEXT_BASE	0xa0000000
-
-#ifdef	CONFIG_ONENAND
-#define	CONFIG_SPL_ONENAND_SUPPORT
-#define	CONFIG_SPL_ONENAND_LOAD_ADDR	0x2000
-#define	CONFIG_SPL_ONENAND_LOAD_SIZE	\
-	(512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
-#define	CONFIG_SPL_TEXT_BASE	0x5c000000
-#define	CONFIG_SPL_LDSCRIPT	"board/vpac270/u-boot-spl.lds"
-#endif
-
-/*
- * Environment settings
- */
-#define	CONFIG_ENV_OVERWRITE
-#define	CONFIG_SYS_MALLOC_LEN		(128*1024)
-#define	CONFIG_ARCH_CPU_INIT
-#define	CONFIG_BOOTCOMMAND						\
-	"if mmc init && fatload mmc 0 0xa4000000 uImage; then "		\
-		"bootm 0xa4000000; "					\
-	"fi; "								\
-	"if usb reset && fatload usb 0 0xa4000000 uImage; then "	\
-		"bootm 0xa4000000; "					\
-	"fi; "								\
-	"if ide reset && fatload ide 0 0xa4000000 uImage; then "	\
-		"bootm 0xa4000000; "					\
-	"fi; "								\
-	"bootm 0x60000;"
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"update_onenand="						\
-		"onenand erase 0x0 0x80000 ; "				\
-		"onenand write 0xa0000000 0x0 0x80000"
-
-#define	CONFIG_BOOTARGS			"console=tty0 console=ttyS0,115200"
-#define	CONFIG_TIMESTAMP
-#define	CONFIG_BOOTDELAY		2	/* Autoboot delay */
-#define	CONFIG_CMDLINE_TAG
-#define	CONFIG_SETUP_MEMORY_TAGS
-#define	CONFIG_LZMA			/* LZMA compression support */
-#define	CONFIG_OF_LIBFDT
-
-/*
- * Serial Console Configuration
- */
-#define	CONFIG_PXA_SERIAL
-#define	CONFIG_FFUART			1
-#define CONFIG_CONS_INDEX		3
-#define	CONFIG_BAUDRATE			115200
-
-/*
- * Bootloader Components Configuration
- */
-#define	CONFIG_CMD_ENV
-#define	CONFIG_CMD_MMC
-#define	CONFIG_CMD_USB
-#undef	CONFIG_LCD
-#define	CONFIG_CMD_IDE
-
-#ifdef	CONFIG_ONENAND
-#define	CONFIG_CMD_ONENAND
-#else
-#undef	CONFIG_CMD_ONENAND
-#endif
-
-/*
- * Networking Configuration
- *  chip on the Voipac PXA270 board
- */
-#ifdef	CONFIG_CMD_NET
-#define	CONFIG_CMD_PING
-#define	CONFIG_CMD_DHCP
-
-#define	CONFIG_DRIVER_DM9000		1
-#define	CONFIG_DM9000_BASE		0x08000300	/* CS2 */
-#define	DM9000_IO			(CONFIG_DM9000_BASE)
-#define	DM9000_DATA			(CONFIG_DM9000_BASE + 4)
-#define	CONFIG_NET_RETRY_COUNT		10
-
-#define	CONFIG_BOOTP_BOOTFILESIZE
-#define	CONFIG_BOOTP_BOOTPATH
-#define	CONFIG_BOOTP_GATEWAY
-#define	CONFIG_BOOTP_HOSTNAME
-#endif
-
-/*
- * MMC Card Configuration
- */
-#ifdef	CONFIG_CMD_MMC
-#define	CONFIG_MMC
-#define	CONFIG_GENERIC_MMC
-#define	CONFIG_PXA_MMC_GENERIC
-#define	CONFIG_SYS_MMC_BASE		0xF0000000
-#define	CONFIG_CMD_FAT
-#define	CONFIG_CMD_EXT2
-#define	CONFIG_DOS_PARTITION
-#endif
-
-/*
- * KGDB
- */
-#ifdef	CONFIG_CMD_KGDB
-#define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#endif
-
-/*
- * HUSH Shell Configuration
- */
-#define	CONFIG_SYS_HUSH_PARSER		1
-
-#define	CONFIG_SYS_LONGHELP
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#else
-#endif
-#define	CONFIG_SYS_CBSIZE		256
-#define	CONFIG_SYS_PBSIZE		\
-	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define	CONFIG_SYS_MAXARGS		16
-#define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define	CONFIG_SYS_DEVICE_NULLDEV	1
-#define	CONFIG_CMDLINE_EDITING		1
-#define	CONFIG_AUTO_COMPLETE		1
-
-/*
- * Clock Configuration
- */
-#define	CONFIG_SYS_CPUSPEED		0x190		/* 312MHz */
-
-
-/*
- * DRAM Map
- */
-#define	CONFIG_NR_DRAM_BANKS		2		/* 2 banks of DRAM */
-#define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
-#define	PHYS_SDRAM_1_SIZE		0x08000000	/* 128 MB */
-
-#ifdef	CONFIG_RAM_256M
-#define	PHYS_SDRAM_2			0x80000000	/* SDRAM Bank #2 */
-#define	PHYS_SDRAM_2_SIZE		0x08000000	/* 128 MB */
-#endif
-
-#define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */
-#ifdef	CONFIG_RAM_256M
-#define	CONFIG_SYS_DRAM_SIZE		0x10000000	/* 256 MB DRAM */
-#else
-#define	CONFIG_SYS_DRAM_SIZE		0x08000000	/* 128 MB DRAM */
-#endif
-
-#define	CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on */
-#define	CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM */
-
-#define	CONFIG_SYS_LOAD_ADDR		PHYS_SDRAM_1
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define	CONFIG_SYS_INIT_SP_ADDR		0x5c010000
-
-/*
- * NOR FLASH
- */
-#define	CONFIG_SYS_MONITOR_BASE		0x0
-#define	CONFIG_SYS_MONITOR_LEN		0x80000
-#define	CONFIG_ENV_ADDR			\
-			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define	CONFIG_ENV_SIZE			0x20000
-#define	CONFIG_ENV_SECT_SIZE		0x20000
-
-#if	defined(CONFIG_CMD_FLASH)	/* NOR */
-#define	PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
-
-#ifdef	CONFIG_RAM_256M
-#define	PHYS_FLASH_2			0x02000000	/* Flash Bank #2 */
-#endif
-
-#define	CONFIG_SYS_FLASH_CFI
-#define	CONFIG_FLASH_CFI_DRIVER		1
-
-#define	CONFIG_SYS_MAX_FLASH_SECT	(4 + 255)
-#ifdef	CONFIG_RAM_256M
-#define	CONFIG_SYS_MAX_FLASH_BANKS	2
-#define	CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1, PHYS_FLASH_2 }
-#else
-#define	CONFIG_SYS_MAX_FLASH_BANKS	1
-#define	CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-#endif
-
-#define	CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ)
-#define	CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ)
-
-#define	CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
-#define	CONFIG_SYS_FLASH_PROTECTION		1
-
-#define	CONFIG_ENV_IS_IN_FLASH		1
-
-#elif	defined(CONFIG_CMD_ONENAND)	/* OneNAND */
-#define	CONFIG_SYS_NO_FLASH
-#define	CONFIG_SYS_ONENAND_BASE		0x00000000
-
-#define	CONFIG_ENV_IS_IN_ONENAND	1
-
-#else	/* No flash */
-#define	CONFIG_SYS_NO_FLASH
-#define	CONFIG_ENV_IS_NOWHERE
-#endif
-
-/*
- * IDE
- */
-#ifdef	CONFIG_CMD_IDE
-#define	CONFIG_LBA48
-#undef	CONFIG_IDE_LED
-#undef	CONFIG_IDE_RESET
-
-#define	__io
-
-#define	CONFIG_SYS_IDE_MAXBUS		1
-#define	CONFIG_SYS_IDE_MAXDEVICE	1
-
-#define	CONFIG_SYS_ATA_BASE_ADDR	0x0c000000
-#define	CONFIG_SYS_ATA_IDE0_OFFSET	0x0
-
-#define	CONFIG_SYS_ATA_DATA_OFFSET	0x120
-#define	CONFIG_SYS_ATA_REG_OFFSET	0x120
-#define	CONFIG_SYS_ATA_ALT_OFFSET	0x120
-
-#define	CONFIG_SYS_ATA_STRIDE		2
-#endif
-
-/*
- * GPIO settings
- */
-#define	CONFIG_SYS_GPSR0_VAL	0x01308800
-#define	CONFIG_SYS_GPSR1_VAL	0x00cf0000
-#define	CONFIG_SYS_GPSR2_VAL	0x922ac000
-#define	CONFIG_SYS_GPSR3_VAL	0x0161e800
-
-#define	CONFIG_SYS_GPCR0_VAL	0x00010000
-#define	CONFIG_SYS_GPCR1_VAL	0x0
-#define	CONFIG_SYS_GPCR2_VAL	0x0
-#define	CONFIG_SYS_GPCR3_VAL	0x0
-
-#define	CONFIG_SYS_GPDR0_VAL	0xcbb18800
-#define	CONFIG_SYS_GPDR1_VAL	0xfccfa981
-#define	CONFIG_SYS_GPDR2_VAL	0x922affff
-#define	CONFIG_SYS_GPDR3_VAL	0x0161e904
-
-#define	CONFIG_SYS_GAFR0_L_VAL	0x00100000
-#define	CONFIG_SYS_GAFR0_U_VAL	0xa5da8510
-#define	CONFIG_SYS_GAFR1_L_VAL	0x6992901a
-#define	CONFIG_SYS_GAFR1_U_VAL	0xaaa5a0aa
-#define	CONFIG_SYS_GAFR2_L_VAL	0xaaaaaaaa
-#define	CONFIG_SYS_GAFR2_U_VAL	0x4109a401
-#define	CONFIG_SYS_GAFR3_L_VAL	0x54010310
-#define	CONFIG_SYS_GAFR3_U_VAL	0x00025401
-
-#define	CONFIG_SYS_PSSR_VAL	0x30
-
-/*
- * Clock settings
- */
-#define	CONFIG_SYS_CKEN		0x00500240
-#define	CONFIG_SYS_CCCR		0x02000290
-
-/*
- * Memory settings
- */
-#define	CONFIG_SYS_MSC0_VAL	0x3ffc95f9
-#define	CONFIG_SYS_MSC1_VAL	0x02ccf974
-#define	CONFIG_SYS_MSC2_VAL	0x00000000
-#ifdef	CONFIG_RAM_256M
-#define	CONFIG_SYS_MDCNFG_VAL	0x8ad30ad3
-#else
-#define	CONFIG_SYS_MDCNFG_VAL	0x88000ad3
-#endif
-#define	CONFIG_SYS_MDREFR_VAL	0x201fe01e
-#define	CONFIG_SYS_MDMRS_VAL	0x00000000
-#define	CONFIG_SYS_FLYCNFG_VAL	0x00000000
-#define	CONFIG_SYS_SXCNFG_VAL	0x40044004
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define	CONFIG_SYS_MECR_VAL	0x00000001
-#define	CONFIG_SYS_MCMEM0_VAL	0x00014307
-#define	CONFIG_SYS_MCMEM1_VAL	0x00014307
-#define	CONFIG_SYS_MCATT0_VAL	0x0001c787
-#define	CONFIG_SYS_MCATT1_VAL	0x0001c787
-#define	CONFIG_SYS_MCIO0_VAL	0x0001430f
-#define	CONFIG_SYS_MCIO1_VAL	0x0001430f
-
-/*
- * LCD
- */
-#ifdef	CONFIG_LCD
-#define	CONFIG_VOIPAC_LCD
-#endif
-
-/*
- * USB
- */
-#ifdef	CONFIG_CMD_USB
-#define	CONFIG_USB_OHCI_NEW
-#define	CONFIG_SYS_USB_OHCI_CPU_INIT
-#define	CONFIG_SYS_USB_OHCI_BOARD_INIT
-#define	CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define	CONFIG_SYS_USB_OHCI_REGS_BASE	0x4C000000
-#define	CONFIG_SYS_USB_OHCI_SLOT_NAME	"vpac270"
-#define	CONFIG_USB_STORAGE
-#endif
-
-#endif	/* __CONFIG_H */