MIPS: drop incaip board

This is dead hardware and no one is interested in making the
necessary changes for upcoming features like generic board or
driver model.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 177 deletions

diff --git a/include/configs/incaip.h b/include/configs/incaip.h
deleted file mode 100644
index e11d1843b9..0000000000
--- a/include/configs/incaip.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * This file contains the configuration parameters for the INCA-IP board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_INCA_IP		1	/* on a INCA-IP Board	*/
-
-#define CONFIG_XWAY_SWAP_BYTES
-
-/*
- * Clock for the MIPS core (MHz)
- * allowed values: 100000000, 133000000, and 150000000 (default)
- */
-#ifndef CONFIG_CPU_CLOCK_RATE
-#define CONFIG_CPU_CLOCK_RATE	150000000
-#endif
-
-#define CONFIG_SYS_XWAY_EBU_BOOTCFG	0x40C4	/* CMULT = 8 */
-
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-
-#define CONFIG_BAUDRATE		115200
-
-#define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
-
-#define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-	"echo"
-
-#undef	CONFIG_BOOTARGS
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off\0"				\
-	"addmisc=setenv bootargs ${bootargs} "				\
-		"console=ttyS0,${baudrate} "				\
-		"ethaddr=${ethaddr} "					\
-		"panic=1\0"						\
-	"flash_nfs=run nfsargs addip addmisc;"				\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip addmisc;"				\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 80500000 ${bootfile};"				\
-		"run nfsargs addip addmisc;bootm\0"			\
-	"rootpath=/opt/eldk/mips_4KC\0"					\
-	"bootfile=/tftpboot/INCA/uImage\0"				\
-	"kernel_addr=B0040000\0"					\
-	"ramdisk_addr=B0100000\0"					\
-	"u-boot=/tftpboot/INCA/u-boot.bin\0"				\
-	"load=tftp 80500000 ${u-boot}\0"				\
-	"update=protect off 1:0-2;era 1:0-2;"				\
-		"cp.b 80500000 B0000000 ${filesize}\0"			\
-	""
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SNTP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP				/* undef to save memory      */
-#define	CONFIG_SYS_PROMPT		"INCA-IP # "	/* Monitor Command Prompt    */
-#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size   */
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16		/* max number of command args*/
-
-#define CONFIG_SYS_MALLOC_LEN		128*1024
-
-#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
-
-#define CONFIG_SYS_MIPS_TIMER_FREQ	(incaip_get_cpuclk() / 2)
-
-#define CONFIG_SYS_SDRAM_BASE		0x80000000
-
-#define	CONFIG_SYS_LOAD_ADDR		0x80100000	/* default load address	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x80100000
-#define CONFIG_SYS_MEMTEST_END		0x80800000
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
-
-#define PHYS_FLASH_1		0xb0000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2		0xb0800000 /* Flash Bank #2 */
-
-/* The following #defines are needed to get flash environment right */
-#define	CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)
-
-#define CONFIG_SYS_INIT_SP_OFFSET	0x400000
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-
-/* Address and size of Primary Environment Sector	*/
-#define CONFIG_ENV_ADDR		0xB0030000
-#define CONFIG_ENV_SIZE		0x10000
-
-#define CONFIG_FLASH_16BIT
-
-#define CONFIG_NR_DRAM_BANKS	1
-
-#define CONFIG_INCA_IP_SWITCH
-#define CONFIG_INCA_IP_SWITCH_AMDIX
-
-/*
- * JFFS2 partitions
- */
-/* No command line, one static partition, use all space on the device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor1"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"nor0=INCA-IP Bank 0"
-#define MTDPARTS_DEFAULT	"mtdparts=INCA-IP Bank 0:192k(uboot)," \
-							"64k(env)," \
-							"768k(linux)," \
-							"1m@3m(rootfs)," \
-							"768k(linux2)," \
-							"3m@5m(rootfs2)"
-*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE		4096
-#define CONFIG_SYS_ICACHE_SIZE		4096
-#define CONFIG_SYS_CACHELINE_SIZE	16
-
-#endif	/* __CONFIG_H */