freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name

Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC to avoid conflict
with UEFI secure boot.

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>

7 files changed, 16 insertions, 16 deletions

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 31abee81ed..1363d3084d 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -66,13 +66,13 @@
 	board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
 #endif
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 /*
  * HDR would be appended at end of image and copied to DDR along
  * with U-Boot image.
  */
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 
 #define CONFIG_SPL_MAX_SIZE		0x1a000
 #define CONFIG_SPL_STACK		0x1001d000
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 40fcd22582..39f9318007 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -192,7 +192,7 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #include <asm/fsl_secure_boot.h>
 #endif
 
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 70447a2183..e237012626 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -74,7 +74,7 @@
 #define CONFIG_SPL_BSS_START_ADDR	0x8f000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
 /*
  * HDR would be appended at end of image and copied to DDR along
@@ -85,7 +85,7 @@
 #define CONFIG_SYS_MONITOR_LEN		(0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 #else
 #define CONFIG_SYS_MONITOR_LEN		0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 #endif
 
 /* NAND SPL */
@@ -100,9 +100,9 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 
 #ifdef CONFIG_U_BOOT_HDR_SIZE
 /*
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 59c43f1ae1..cc8f4c0210 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -73,7 +73,7 @@
 					CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
 /*
  * HDR would be appended at end of image and copied to DDR along
@@ -84,7 +84,7 @@
 #define CONFIG_SYS_MONITOR_LEN		(0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 #else
 #define CONFIG_SYS_MONITOR_LEN		0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 #endif
 
 #if defined(CONFIG_QSPI_BOOT) && defined(CONFIG_SPL)
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 6f04dbaccd..73c56296ff 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -235,7 +235,7 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START    0x80200000
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE		(16 << 10)
 /*
  * HDR would be appended at end of image and copied to DDR along
@@ -246,7 +246,7 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_MONITOR_LEN         (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 #else
 #define CONFIG_SYS_MONITOR_LEN         0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 
 #endif
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 85e20617e6..c9c517f93e 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -407,7 +407,7 @@ unsigned long get_board_ddr_clk(void);
 	QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
 
 /* Initial environment variables */
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
@@ -426,7 +426,7 @@ unsigned long get_board_ddr_clk(void);
 	"sf read 0xa0740000 0x740000 0x4000;esbc_validate 0xa0740000;"	\
 	"fsl_mc start mc 0xa0a00000 0xa0e00000\0"			\
 	"mcmemsize=0x70000000 \0"
-#else /* if !(CONFIG_SECURE_BOOT) */
+#else /* if !(CONFIG_NXP_ESBC) */
 #ifdef CONFIG_TFABOOT
 #define QSPI_MC_INIT_CMD				\
 	"sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"	\
@@ -522,7 +522,7 @@ unsigned long get_board_ddr_clk(void);
 	"mcmemsize=0x70000000 \0"
 #endif
 #endif /* CONFIG_TFABOOT */
-#endif /* CONFIG_SECURE_BOOT */
+#endif /* CONFIG_NXP_ESBC */
 
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_FSL_MEMAC
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index e2a897557d..08696fa9a3 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -352,7 +352,7 @@ unsigned long get_board_ddr_clk(void);
 
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
 	"loadaddr=0x80100000\0"			\
@@ -442,7 +442,7 @@ unsigned long get_board_ddr_clk(void);
 	"mcinitcmd=fsl_mc start mc 0x580a00000" \
 	" 0x580e00000 \0"
 #endif /* CONFIG_TFABOOT */
-#endif /* CONFIG_SECURE_BOOT */
+#endif /* CONFIG_NXP_ESBC */
 
 #ifdef CONFIG_TFABOOT
 #define SD_BOOTCOMMAND						\