Add common (with Linux) MTD partition scheme and "mtdparts" command

Old, obsolete and duplicated code was cleaned up and replace by the
new partitioning method. There are two possible approaches now:
* define a single, static partition
* use mtdparts command line option and dynamic partitioning
Default is static partitioning.

44 files changed, 790 insertions, 137 deletions

diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h
index 2d212c91c5..2efca1056e 100644
--- a/include/configs/ADNPESC1.h
+++ b/include/configs/ADNPESC1.h
@@ -674,5 +674,21 @@
 #undef	CFG_MEMTEST_END
 #endif
 
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		""
+#define MTDPARTS_DEFAULT	""
+*/
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
index dc01f0cb11..9a3acfecd5 100644
--- a/include/configs/Alaska8220.h
+++ b/include/configs/Alaska8220.h
@@ -229,17 +229,6 @@
 #undef CFG_ENV_IS_IN_FLASH
 #endif
 
-#ifndef CFG_JFFS2_FIRST_SECTOR
-#define CFG_JFFS2_FIRST_SECTOR	0
-#endif
-#ifndef CFG_JFFS2_FIRST_BANK
-#define CFG_JFFS2_FIRST_BANK	0
-#endif
-#ifndef CFG_JFFS2_NUM_BANKS
-#define CFG_JFFS2_NUM_BANKS	1
-#endif
-#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1)
-
 /*
  * Memory map
  */
@@ -314,4 +303,23 @@
 #define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CFG_HID0_FINAL		HID0_ICE
 
+/*
+ * JFFS2 partitions
+ */
+
+/* No command line, one static partition */
+/*
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0x00400000
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+*/
+
+/* mtdparts command line support */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=alaska-0"
+#define MTDPARTS_DEFAULT	"mtdparts=alaska-0:4m(user)"
+*/
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/BAB7xx.h b/include/configs/BAB7xx.h
index 5dd7a7e9f7..81c8d59e81 100644
--- a/include/configs/BAB7xx.h
+++ b/include/configs/BAB7xx.h
@@ -28,8 +28,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/processor.h>
-
 #undef  DEBUG
 #define GTREGREAD(x) 0xffffffff         /* needed for debug */
 
@@ -201,8 +199,25 @@
 #define CFG_FLASH_ERASE_TOUT    120000      /* Timeout for Flash Erase (in ms) */
 #define CFG_FLASH_WRITE_TOUT    500         /* Timeout for Flash Write (in ms) */
 
-#define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS     1           /* ! second bank contains U-Boot */
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support
+ *
+ * Note: fake mtd_id used, no linux mtd map file
+ */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=bab7xx-0"
+#define MTDPARTS_DEFAULT	"mtdparts=bab7xx-0:-(jffs2)"
+*/
 
 #define CFG_MONITOR_BASE        CFG_FLASH_BASE
 #define CFG_MONITOR_LEN         0x40000     /* Reserve 256 kB for Monitor */
diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 61022e8d5b..776fce5a98 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -377,11 +377,6 @@
 
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#if 0 /* test-only */
-#define CFG_JFFS2_FIRST_BANK	0	/* use for JFFS2			*/
-#define CFG_JFFS2_NUM_BANKS	1	/* ! second bank contains U-Boot	*/
-#endif
-
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
@@ -767,9 +762,26 @@
 #endif /* CONFIG_NO_SERIAL_EEPROM */
 
 #define CONFIG_JFFS2_NAND 1			/* jffs2 on nand support */
-#define CONFIG_JFFS2_NAND_DEV 0			/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_NAND_OFF 0			/* start of jffs2 partition */
-#define CONFIG_JFFS2_NAND_SIZE 2*1024*1024	/* size of jffs2 partition */
 #define NAND_CACHE_PAGES 16			/* size of nand cache in 512 bytes pages */
 
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nand"
+#define CONFIG_JFFS2_PART_SIZE		0x00200000
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support
+ *
+ * Note: fake mtd_id used, no linux mtd map file
+ */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nand0=catcenter"
+#define MTDPARTS_DEFAULT	"mtdparts=catcenter:2m(nand)"
+*/
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index 4bb47c324d..d1498eed3c 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -242,8 +242,28 @@
 
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
+
+/*
+ * JFFS2 partitions
+ */
+
+/* No command line, one static partition, use whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+
+/* Use first bank for JFFS2, second bank contains U-Boot.
+ *
+ * Note: fake mtd_id's used, no linux mtd map file.
+ */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=cpci4052-0"
+#define MTDPARTS_DEFAULT	"mtdparts=cpci4052-0:-(jffs2)"
+*/
 
 #if 0 /* Use NVRAM for environment variables */
 /*-----------------------------------------------------------------------
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index dee26f8716..29bd3da988 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -225,8 +225,26 @@
 
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
+/*
+ * JFFS2 partitions
+ */
+/* No command line, one static partition */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+
+/* Use first bank for JFFS2, second bank contains U-Boot.
+ *
+ * Note: fake mtd_id's used, no linux mtd map file.
+ */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=cpci405ab-0"
+#define MTDPARTS_DEFAULT	"mtdparts=cpci405ab-0:-(jffs2)"
+*/
 
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC32) for environment
diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h
index 5c4259df38..6673073c00 100644
--- a/include/configs/CPCI405DT.h
+++ b/include/configs/CPCI405DT.h
@@ -247,8 +247,26 @@
 
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS	1	    /* ! second bank contains U-Boot */
+/*
+ * JFFS2 partitions
+ */
+/* No command line, one static partition */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+
+/* Use first bank for JFFS2, second bank contains U-Boot.
+ *
+ * Note: fake mtd_id's used, no linux mtd map file.
+ */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=cpci405dt-0"
+#define MTDPARTS_DEFAULT	"mtdparts=cpci405dt-0:-(jffs2)"
+*/
 
 #if 0 /* Use NVRAM for environment variables */
 /*-----------------------------------------------------------------------
diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
index fab263b4b6..8bfd0ee820 100644
--- a/include/configs/CPCI750.h
+++ b/include/configs/CPCI750.h
@@ -38,8 +38,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/processor.h>
-
 /* This define must be before the core.h include */
 #define CONFIG_CPCI750		1	/* this is an CPCI750 board	*/
 
diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h
index d6ce8a873b..e2b4b1da62 100644
--- a/include/configs/DB64360.h
+++ b/include/configs/DB64360.h
@@ -88,8 +88,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/processor.h>
-
 /* This define must be before the core.h include */
 #define CONFIG_DB64360		1	/* this is an DB64360 board	*/
 
@@ -219,10 +217,27 @@ ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000;\0"
 
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
 				 CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor1"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
 
-/* Flash banks JFFS2 should use */
-#define CFG_JFFS2_FIRST_BANK	1
-#define CFG_JFFS2_NUM_BANKS	1
+/* Use first bank for JFFS2, second bank contains U-Boot.
+ *
+ * Note: fake mtd_id's used, no linux mtd map file.
+ */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor1=db64360-1"
+#define MTDPARTS_DEFAULT	"mtdparts=db64360-1:-(jffs2)"
+*/
 
 #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
 			 | CFG_CMD_ASKENV \
diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h
index fb0248102f..5f541bb9a9 100644
--- a/include/configs/DB64460.h
+++ b/include/configs/DB64460.h
@@ -28,8 +28,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/processor.h>
-
 /* This define must be before the core.h include */
 #define CONFIG_DB64460		1	/* this is an DB64460 board	*/
 
@@ -157,10 +155,27 @@ ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000;\0"
 
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
 				 CONFIG_BOOTP_BOOTFILESIZE)
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor1"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
 
-/* Flash banks JFFS2 should use */
-#define CFG_JFFS2_FIRST_BANK	1
-#define CFG_JFFS2_NUM_BANKS	1
+/* Use first bank for JFFS2, second bank contains U-Boot.
+ *
+ * Note: fake mtd_id's used, no linux mtd map file.
+ */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor1=db64460-1"
+#define MTDPARTS_DEFAULT	"mtdparts=db64460-1:-(jffs2)"
+*/
 
 #define CONFIG_COMMANDS (CONFIG_CMD_DFL \
 			 | CFG_CMD_ASKENV \
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h
index 14a09b6dd2..b58846d831 100644
--- a/include/configs/DK1C20.h
+++ b/include/configs/DK1C20.h
@@ -536,5 +536,21 @@
 #undef	CFG_MEMTEST_END
 #endif
 
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		""
+#define MTDPARTS_DEFAULT	""
+*/
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h
index e79eb490f6..3e3803cd23 100644
--- a/include/configs/DK1S10.h
+++ b/include/configs/DK1S10.h
@@ -545,5 +545,21 @@
 #undef	CFG_MEMTEST_END
 #endif
 
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		""
+#define MTDPARTS_DEFAULT	""
+*/
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h
index 7176905a36..e51d058047 100644
--- a/include/configs/ELPPC.h
+++ b/include/configs/ELPPC.h
@@ -28,8 +28,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/processor.h>
-
 #undef  DEBUG
 #define GTREGREAD(x) 0xffffffff         /* needed for debug */
 
@@ -181,8 +179,23 @@
 #define CFG_FLASH_ERASE_TOUT    120000      /* Timeout for Flash Erase (in ms) */
 #define CFG_FLASH_WRITE_TOUT    500         /* Timeout for Flash Write (in ms) */
 
-#define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS     2           /* ! second bank contains U-Boot */
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=elppc-0,nor1=elppc-1"
+#define MTDPARTS_DEFAULT	"mtdparts=elppc-0:-(jffs2),elppc-1:-(user)"
+*/
 
 #define CFG_MONITOR_BASE        CFG_FLASH_BASE
 #define CFG_MONITOR_LEN         0x40000     /* Reserve 256 kB for Monitor */
diff --git a/include/configs/EVB64260.h b/include/configs/EVB64260.h
index 9baf252f61..78e5716885 100644
--- a/include/configs/EVB64260.h
+++ b/include/configs/EVB64260.h
@@ -28,8 +28,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/processor.h>
-
 #ifndef __ASSEMBLY__
 #include <galileo/core.h>
 #endif
diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h
index 91011be367..933a42c5ce 100644
--- a/include/configs/LANTEC.h
+++ b/include/configs/LANTEC.h
@@ -356,4 +356,21 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		""
+#define MTDPARTS_DEFAULT	""
+*/
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MHPC.h b/include/configs/MHPC.h
index f942e95549..cd21c2dbbe 100644
--- a/include/configs/MHPC.h
+++ b/include/configs/MHPC.h
@@ -184,8 +184,23 @@
 #define CFG_MONITOR_BASE	CFG_FLASH_BASE
 #define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
 
-#define CFG_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS	1	    /* one flash only */
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=mhpc-0"
+#define MTDPARTS_DEFAULT	"mtdparts=mhpc-0:-(jffs2)"
+*/
 
 /*
  * For booting Linux, the board info and command line data
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 41a3d394a1..0af9c68dc8 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -236,8 +236,23 @@
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS     1           /* ! second bank contains U-Boot */
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=mip405-0"
+#define MTDPARTS_DEFAULT	"mtdparts=mip405-0:-(jffs2)"
+*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
diff --git a/include/configs/ML2.h b/include/configs/ML2.h
index c6cc69bc23..6e54d71e55 100644
--- a/include/configs/ML2.h
+++ b/include/configs/ML2.h
@@ -241,9 +241,22 @@
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
-/* JFFS2 stuff */
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00080000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=ml2-0"
+#define MTDPARTS_DEFAULT	"mtdparts=ml2-0:-@512k(jffs2)"
+*/
 
-#define CFG_JFFS2_FIRST_BANK 0
-#define CFG_JFFS2_NUM_BANKS 1
-#define CFG_JFFS2_FIRST_SECTOR 1
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index bba476a6a0..9188ae5bbb 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -278,10 +278,14 @@
 #define CFG_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
 #define CFG_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
 
-#define CFG_JFFS2_FIRST_SECTOR  1
-#define CFG_JFFS2_LAST_SECTOR   27
+/*
+ * JFFS2 partitions
+ *
+ * Note: fake mtd_id used, no linux mtd map file
+ */
+#define MTDIDS_DEFAULT		"nor0=mpc8260ads-0"
+#define MTDPARTS_DEFAULT	"mtdparts=mpc8260ads-0:-@1m(jffs2)"
 #define CFG_JFFS2_SORT_FRAGMENTS
-#define CFG_JFFS_CUSTOM_PART
 
 /* this is stuff came out of the Motorola docs */
 #ifndef CFG_LOWBOOT
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index d8e91a5306..0a4b04df4b 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -573,5 +573,21 @@
 #define CFG_PCI_MSTR_IO_SIZE        0x04000000          /* 64MB */
 #define CFG_POCMR2_MASK_ATTRIB      (POCMR_MASK_64MB | POCMR_ENABLE | POCMR_PCI_IO)
 
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		""
+#define MTDPARTS_DEFAULT	""
+*/
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/NC650.h b/include/configs/NC650.h
index 3acdd77fec..d24d05f25e 100644
--- a/include/configs/NC650.h
+++ b/include/configs/NC650.h
@@ -400,9 +400,27 @@
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
 #define CONFIG_JFFS2_NAND 1			/* jffs2 on nand support */
-#define CONFIG_JFFS2_NAND_DEV 0			/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_NAND_OFF 0			/* start of jffs2 partition */
-#define CONFIG_JFFS2_NAND_SIZE 4*1024*1024	/* size of jffs2 partition */
 #define NAND_CACHE_PAGES 16			/* size of nand cache in 512 bytes pages */
 
+/*
+ * JFFS2 partitions
+ */
+
+/* No command line, one static partition */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nand0"
+#define CONFIG_JFFS2_PART_SIZE		0x00400000
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=nc650-0,nand0=nc650-nand"
+
+#define MTDPARTS_DEFAULT	"mtdparts=nc650-0:1m(kernel1),1m(kernel2)," \
+					"2560k(cramfs1),2560k(cramfs2)," \
+					"256k(u-boot),256k(env);" \
+				"nc650-nand:4m(nand1),28m(nand2)"
+*/
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index 1d12eb4c67..3573b3711d 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -685,11 +685,26 @@
 	((unsigned char)(*(volatile unsigned char *)(unsigned long)(adr)))
 
 #define CONFIG_JFFS2_NAND	1			/* jffs2 on nand support */
-#define CONFIG_JFFS2_NAND_DEV	0			/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_NAND_OFF	(2 * 1024 * 1024)	/* start of jffs2 partition */
-#define CONFIG_JFFS2_NAND_SIZE	(1*1024*1024)		/* size of jffs2 partition */
 #define NAND_CACHE_PAGES	16			/* size of nand cache in 512 bytes pages */
 
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nand0"
+#define CONFIG_JFFS2_PART_SIZE		0x00100000 
+#define CONFIG_JFFS2_PART_OFFSET	0x00200000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nand0=netta-nand"
+#define MTDPARTS_DEFAULT	"mtdparts=netta-nand:1m@2m(jffs2)"
+*/
+
 /*****************************************************************************/
 
 #define CFG_DIRECT_FLASH_TFTP
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index d8d9632628..11d6fa767c 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -193,8 +193,23 @@
 
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#define CFG_JFFS2_FIRST_BANK	0	    /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS	1	    /* ! second bank contains u-boot	*/
+/*
+ * JFFS2 partitions - second bank contains u-boot
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=pmc405-0"
+#define MTDPARTS_DEFAULT	"mtdparts=pmc405-0:-(jffs2)"
+*/
 
 /*-----------------------------------------------------------------------
  * Environment Variable setup
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index ca0bd12f06..2d89f3ffaf 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -336,9 +336,19 @@
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define CFG_SDRAM_BASE		0x00000000
+
+/* Reserve 256 kB for Monitor	*/
 #define CFG_FLASH_BASE		0xFFFC0000
 #define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_LEN		(256 * 1024)
+
+/* Reserve 320 kB for Monitor	*/
+/*
+#define CFG_FLASH_BASE		0xFFFB0000
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CFG_MONITOR_LEN		(320 * 1024)
+*/
+
 #define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
 
 /*
@@ -369,11 +379,6 @@
 
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
-#if 0 /* test-only */
-#define CFG_JFFS2_FIRST_BANK	0	 /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS	1	 /* ! second bank contains U-Boot */
-#endif
-
 /*-----------------------------------------------------------------------
  * Environment Variable setup
  */
@@ -770,9 +775,36 @@
 #endif /* CONFIG_NO_SERIAL_EEPROM */
 
 #define CONFIG_JFFS2_NAND 1			/* jffs2 on nand support */
-#define CONFIG_JFFS2_NAND_DEV 0			/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_NAND_OFF 0			/* start of jffs2 partition */
-#define CONFIG_JFFS2_NAND_SIZE 4*1024*1024	/* size of jffs2 partition */
 #define NAND_CACHE_PAGES 16			/* size of nand cache in 512 bytes pages */
 
+/*
+ * JFFS2 partitions
+ */
+
+/* No command line, one static partition */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nand0"
+#define CONFIG_JFFS2_PART_SIZE		0x00400000
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=PPChameleon-0,nand0=ppchameleonevb-nand"
+*/
+
+/* 256 kB U-boot image */
+/*
+#define MTDPARTS_DEFAULT	"mtdparts=PPChameleon-0:1m(kernel1),1m(kernel2)," \
+					"1792k(user),256k(u-boot);" \
+				"ppchameleonevb-nand:-(nand)"
+*/
+
+/* 320 kB U-boot image */
+/*
+#define MTDPARTS_DEFAULT	"mtdparts=PPChameleon-0:1m(kernel1),1m(kernel2)," \
+					"1728k(user),320k(u-boot);" \
+				"ppchameleonevb-nand:-(nand)"
+*/
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h
index c456fbf18b..d7b093b3cf 100644
--- a/include/configs/R360MPI.h
+++ b/include/configs/R360MPI.h
@@ -152,10 +152,22 @@
 
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-/* JFFS2 stuff */
-#define CFG_JFFS2_FIRST_BANK	0
-#define CFG_JFFS2_NUM_BANKS	1
-#define CFG_JFFS2_FIRST_SECTOR	24
+/*
+ * JFFS2 partitions
+ */
+/* No command line, one static partition
+ * use all the space starting at offset 3MB*/
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00300000
+
+/* mtdparts command line support */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=r360-0"
+#define MTDPARTS_DEFAULT	"mtdparts=r360-0:-@3m(user)"
+*/
 
 /*
  * Low Level Configuration Settings
diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
index b0e491067a..4d47d3ee5e 100644
--- a/include/configs/RBC823.h
+++ b/include/configs/RBC823.h
@@ -417,4 +417,22 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		""
+#define MTDPARTS_DEFAULT	""
+*/
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
index a55297096f..a170f290e0 100644
--- a/include/configs/Rattler.h
+++ b/include/configs/Rattler.h
@@ -186,10 +186,26 @@
 #define	CFG_DIRECT_FLASH_TFTP
 
 #if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
-#define CFG_JFFS2_FIRST_BANK	0
 #define CFG_JFFS2_NUM_BANKS	CFG_MAX_FLASH_BANKS
-#define CFG_JFFS2_FIRST_SECTOR  16
 #define CFG_JFFS2_SORT_FRAGMENTS
+
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00100000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=rattler-0"
+#define MTDPARTS_DEFAULT	"mtdparts=rattler-0:-@1m(jffs2)"
+*/
 #endif /* CFG_CMD_JFFS2 */
 
 #define CFG_MONITOR_BASE	TEXT_BASE
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index 195c036bb9..9ce83b48bf 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -154,14 +154,32 @@
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
-#define CFG_JFFS_CUSTOM_PART
 #define CFG_JFFS2_SORT_FRAGMENTS
-/* JFFS2 location when using NOR flash */
-#define CFG_JFFS2_BASE	(CFG_FLASH_BASE + 0x80000)
-#define CFG_JFFS2_SIZE	(0x780000)
-/* JFFS2 location (in RAM) when using NAND flash */
-#define	CFG_JFFS2_RAMBASE 0x400000
-#define	CFG_JFFS2_RAMSIZE 0x200000	/* NAND boot partition is 2MiB	*/
+
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition */
+#undef CONFIG_JFFS2_CMDLINE
+
+/*
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0x00780000
+#define CONFIG_JFFS2_PART_OFFSET	0x00080000
+*/
+
+#define CONFIG_JFFS2_DEV		"nand0"
+#define CONFIG_JFFS2_PART_SIZE		0x00200000
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=sixnet-0,nand0=sixnet-nand"
+#define MTDPARTS_DEFAULT	"mtdparts=sixnet-0:7680k@512k();sixnet-nand:2m(jffs2-nand)"
+*/
 
 /* NAND flash support */
 #define CONFIG_MTD_NAND_ECC_JFFS2
diff --git a/include/configs/ZUMA.h b/include/configs/ZUMA.h
index 578f152fde..f163d003b9 100644
--- a/include/configs/ZUMA.h
+++ b/include/configs/ZUMA.h
@@ -28,8 +28,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/processor.h>
-
 #define CFG_GT_6426x        GT_64260 /* with a 64260 system controller */
 #define CONFIG_ETHER_PORT_MII	/* use two MII ports */
 #define CONFIG_INTEL_LXT97X	/* Intel LXT97X phy */
@@ -115,9 +113,23 @@
 				 CFG_CMD_MII	| \
 				 CFG_CMD_DATE)
 
-/* Flash banks JFFS2 should use */
-#define CFG_JFFS2_FIRST_BANK	1
-#define CFG_JFFS2_NUM_BANKS	2
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor1=zuma-1,nor2=zuma-2"
+#define MTDPARTS_DEFAULT	"mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
+*/
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
diff --git a/include/configs/debris.h b/include/configs/debris.h
index a9a2458872..b483f407d2 100644
--- a/include/configs/debris.h
+++ b/include/configs/debris.h
@@ -217,8 +217,27 @@
 #define CFG_FLASH_RANGE_SIZE	0x01000000
 #define FLASH_BASE0_PRELIM	0x7C000000	/* debris flash		*/
 
-#define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS     1
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+
+/* Use first bank for JFFS2, second bank contains U-Boot.
+ *
+ * Note: fake mtd_id's used, no linux mtd map file.
+ */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=debris-0"
+#define MTDPARTS_DEFAULT	"mtdparts=debris-0:-(jffs2)"
+*/
 
 #define CFG_ENV_IS_IN_NVRAM      1
 #define CONFIG_ENV_OVERWRITE     1
diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h
index c6a028fabd..bdda6292ed 100644
--- a/include/configs/ep7312.h
+++ b/include/configs/ep7312.h
@@ -142,9 +142,22 @@
 #define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x20000)	/* Addr of Environment Sector	*/
 #define CFG_ENV_SIZE		0x20000	/* Total Size of Environment Sector	*/
 
-/* Flash banks JFFS2 should use */
-#define CFG_JFFS2_FIRST_BANK    0
-#define CFG_JFFS2_FIRST_SECTOR	2
-#define CFG_JFFS2_NUM_BANKS     1
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=ep7312-0"
+#define MTDPARTS_DEFAULT	"mtdparts=ep7312-0:-(jffs2)"
+*/
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index 98e1716bf1..8b0afd5a67 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -744,4 +744,22 @@
 #define BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM   0x02    /* Software reboot                   */
 
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		""
+#define MTDPARTS_DEFAULT	""
+*/
+
 #endif  /* __CONFIG_H */
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 0d62b9efde..aadb59f1f1 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -712,4 +712,21 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot		*/
 
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		""
+#define MTDPARTS_DEFAULT	""
+*/
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/impa7.h b/include/configs/impa7.h
index c187c54d6c..8b841ff546 100644
--- a/include/configs/impa7.h
+++ b/include/configs/impa7.h
@@ -144,9 +144,21 @@
 #define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x1C000)	/* Addr of Environment Sector	*/
 #define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
-/* Flash banks JFFS2 should use */
-#define CFG_JFFS2_FIRST_BANK    0
-#define CFG_JFFS2_FIRST_SECTOR	8
-#define CFG_JFFS2_NUM_BANKS     2
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00020000
+
+/* mtdparts command line support */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=impA7 NOR Flash Bank #0,nor1=impA7 NOR Flash Bank #1"
+#define MTDPARTS_DEFAULT	"mtdparts=impA7 NOR Flash Bank #0:-(FileSystem1);impA7 NOR Flash Bank #1:-(FileSystem2)"
+*/
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/incaip.h b/include/configs/incaip.h
index 7db3744cf4..0f548a52a2 100644
--- a/include/configs/incaip.h
+++ b/include/configs/incaip.h
@@ -148,8 +148,26 @@
 #define CONFIG_NET_MULTI
 #define CONFIG_INCA_IP_SWITCH_AMDIX
 
-#define CFG_JFFS2_FIRST_BANK	1
-#define CFG_JFFS2_NUM_BANKS	1
+/*
+ * JFFS2 partitions
+ */
+/* No command line, one static partition, use all space on the device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor1"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=INCA-IP Bank 0"
+#define MTDPARTS_DEFAULT	"mtdparts=INCA-IP Bank 0:192k(uboot)," \
+							"64k(env)," \
+							"768k(linux)," \
+							"1m@3m(rootfs)," \
+							"768k(linux2)," \
+							"3m@5m(rootfs2)"
+*/
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index fce72e112b..3cb9ebc454 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -164,14 +164,42 @@
 
 #define CFG_FLASH_BASE          PHYS_FLASH_1
 
-
 /*
- * JFFS2 Partitions
+ * JFFS2 partitions
+ *
  */
-#define CFG_JFFS_CUSTOM_PART	1		/* see board/innokom/flash.c */
-#define CONFIG_MTD_INNOKOM_16MB 1		/* development flash         */
-#undef  CONFIG_MTD_INNOKOM_64MB			/* production flash          */
+/* development flash */
+#define CONFIG_MTD_INNOKOM_16MB	1
+#undef CONFIG_MTD_INNOKOM_64MB
+
+/* production flash */
+/*
+#define CONFIG_MTD_INNOKOM_64MB	1
+#undef CONFIG_MTD_INNOKOM_16MB
+*/
+
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=innokom-0"
+*/
 
+/* development flash */
+/*
+#define MTDPARTS_DEFAULT	"mtdparts=innokom-0:256k(uboot),768k(kernel),8m(user),7m(data)"
+*/
+
+/* production flash */
+/*
+#define MTDPARTS_DEFAULT	"mtdparts=innokom-0:256k(uboot),768k(kernel),16256k(user1),16256k(user2),32m(data)"
+*/
 
 /*
  * GPIO settings
diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h
index 067c84623f..20287674fa 100644
--- a/include/configs/modnet50.h
+++ b/include/configs/modnet50.h
@@ -165,9 +165,22 @@
 #define CFG_ENV_SECT_SIZE       0x10000 /* Total Size of Environment Sector */
 #define CFG_ENV_SIZE		0x4000	/* max size for environment */
 
-/* Flash banks JFFS2 should use */
-#define CFG_JFFS2_FIRST_BANK    0
-#define CFG_JFFS2_FIRST_SECTOR	8
-#define CFG_JFFS2_NUM_BANKS     2
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00080000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=modnet50-0"
+#define MTDPARTS_DEFAULT	"mtdparts=modnet50-0:-@512k(jffs2)"
+*/
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
index 7b4dc92c6c..9816be8dc4 100644
--- a/include/configs/mx1fs2.h
+++ b/include/configs/mx1fs2.h
@@ -87,7 +87,6 @@
 #define	 CONFIG_INITRD_TAG	     1	   /* send initrd params	*/
 #undef	CONFIG_VFD			 /* do not send framebuffer setup    */
 
-#define CFG_JFFS_CUSTOM_PART
 /*
  * Malloc pool need to host env + 128 Kb reserve for other allocations.
  */
@@ -136,10 +135,6 @@
 #define MX1FS2_FLASH_INTERLEAVE 2	/* ... made of 2 chips */
 #define MX1FS2_FLASH_BANK_SIZE	0x02000000  /* size of one flash bank*/
 #define MX1FS2_FLASH_SECT_SIZE	0x00020000  /* size of erase sector */
-#define MX1FS2_JFFS2_PART0_START 0x10200000
-#define MX1FS2_JFFS2_PART0_SIZE	 0x00500000
-#define MX1FS2_JFFS2_PART1_START 0x10700000
-#define MX1FS2_JFFS2_PART1_SIZE	 0x00900000
 #else
 #define MX1FS2_FLASH_BUS_WIDTH	2	/* we use 16 bit FLASH memory...     */
 #define MX1FS2_FLASH_INTERLEAVE 1	/* ... made of 1 chip */
@@ -167,9 +162,28 @@
  * footprint.
  * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
  */
-#define CFG_JFFS2_FIRST_BANK		0
-#define CFG_JFFS2_FIRST_SECTOR		5
-#define CFG_JFFS2_NUM_BANKS		1
+
+/*
+ * JFFS2 partitions
+ */
+/* No command line, one static partition, whole device */
+/*
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00050000
+*/
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=mx1fs2-0"
+
+#ifdef BUS32BIT_VERSION
+#define MTDPARTS_DEFAULT	"mtdparts=mx1fs2-0:2m@5m(part0),5m@9m(part1)"
+#else
+#define MTDPARTS_DEFAULT	"mtdparts=mx1fs2-0:-@320k(jffs2)"
+#endif
 
 /*
  * Environment setup. Definitions of monitor location and size with
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 47f78fad4b..c7916036ff 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -265,10 +265,23 @@
 #define CFG_FLASH_ERASE_TOUT     (30*75*CFG_HZ) /* Timeout for Flash Erase */
 #define CFG_FLASH_WRITE_TOUT     (30*75*CFG_HZ) /* Timeout for Flash Write */
 
-/* Flash banks JFFS2 should use */
-#define CFG_MAX_MTD_BANKS	(CFG_MAX_FLASH_BANKS+CFG_MAX_NAND_DEVICE)
 #define CFG_JFFS2_MEM_NAND
-#define CFG_JFFS2_FIRST_BANK	1		/* use flash_info[1] */
-#define CFG_JFFS2_NUM_BANKS     1
+
+/*
+ * JFFS2 partitions
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor1"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor1=omap2420-1"
+#define MTDPARTS_DEFAULT	"mtdparts=omap2420-1:-(jffs2)"
+*/
 
 #endif							/* __CONFIG_H */
diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index 764efdf720..d7d07a62fc 100644
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -138,8 +138,22 @@
 #define CONFIG_SC520_CDP_USE_SPI  /* Store configuration in the SPI part */
 #undef CONFIG_SC520_CDP_USE_MW    /* Store configuration in the MicroWire part */
 #define CONFIG_SPI_X 1
-#define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS     1           /*  */
+
+/*
+ * JFFS2 partitions
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=SC520CDP Flash Bank #0"
+#define MTDPARTS_DEFAULT	"mtdparts=SC520CDP Flash Bank #0:-(jffs2)"
+*/
 
 /*-----------------------------------------------------------------------
  * Device drivers
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
index 4114dd323d..a8e355508b 100644
--- a/include/configs/sc520_spunk.h
+++ b/include/configs/sc520_spunk.h
@@ -147,8 +147,23 @@
 
 #endif
 
-#define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS     1           /*  */
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=sc520_spunk-0"
+#define MTDPARTS_DEFAULT	"mtdparts=sc520_spunk-0:-(jffs2)"
+*/
 
 /*-----------------------------------------------------------------------
  * Device drivers
diff --git a/include/configs/v37.h b/include/configs/v37.h
index 45bc353ad2..b3c62556d2 100644
--- a/include/configs/v37.h
+++ b/include/configs/v37.h
@@ -87,10 +87,23 @@
 				CFG_CMD_JFFS2	| \
 				CFG_CMD_DATE	)
 
-
-/* Flash banks JFFS2 should use */
-#define CFG_JFFS2_FIRST_BANK	1
-#define CFG_JFFS2_NUM_BANKS	1
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor1"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor1=v37-1"
+#define MTDPARTS_DEFAULT	"mtdparts=v37-1:-(jffs2)"
+*/
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h
index 1640163cd4..72b0a4c8e8 100644
--- a/include/configs/voiceblue.h
+++ b/include/configs/voiceblue.h
@@ -247,4 +247,22 @@
 
 #define VOICEBLUE_LED_REG	0x04030000
 
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00040000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=voiceblue-0"
+#define MTDPARTS_DEFAULT	"mtdparts=voiceblue-0:128k(uboot),64k(env),64k(renv),-(jffs2)"
+*/
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h
index 847e91a059..dc702cf445 100644
--- a/include/configs/xsengine.h
+++ b/include/configs/xsengine.h
@@ -59,9 +59,23 @@
 #define PHYS_FLASH_2			0x00000000	/* Flash Bank #2 */
 #define PHYS_FLASH_SECT_SIZE		0x00020000	/* 127 KB sectors */
 #define CFG_FLASH_BASE			PHYS_FLASH_1
-#define CFG_JFFS2_NUM_BANKS		1
-#define CFG_JFFS2_FIRST_BANK		0
-#define CFG_JFFS_CUSTOM_PART		1
+
+/*
+ * JFFS2 partitions
+ */
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=xsengine-0"
+#define MTDPARTS_DEFAULT	"mtdparts=xsengine-0:256k(uboot),1m(kernel1),8m(kernel2)"
+*/
 
 /* Environment settings */
 #define CONFIG_ENV_OVERWRITE