Merge branch 'master' of git://git.denx.de/u-boot-arm

author: Stefano Babic <sbabic@denx.de> 2014-01-26 12:11:54 +0100
committer: Stefano Babic <sbabic@denx.de> 2014-01-26 12:11:54 +0100
commit: 707acd01ded3c60a4e277f7c5432d397897b4dfd (patch)
tree: 5730e1e1f0bac6c1aeddc261cb412fc3d5f220fd /include/configs
parent: be2a3bb39adf1fdd274fc427e30ef62eb86441a1 (diff)
parent: c71b4dd2da0dcddabd7c29e6c3dc8a495d4bd928 (diff)
147 files changed, 824 insertions, 1227 deletions
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index b2a5c19e0e..c182158be4 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -289,6 +289,8 @@ unsigned long get_board_ddr_clk(void);
 
 /* NAND Flash on IFC */
 #define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_NAND_MAX_ECCPOS	256
+#define CONFIG_SYS_NAND_MAX_OOBFREE	2
 #define CONFIG_SYS_NAND_BASE		0xff800000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_NAND_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_NAND_BASE)
@@ -737,7 +739,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index 499d8c2054..584aba8d0e 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -29,7 +29,7 @@
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 
@@ -382,7 +382,6 @@ extern unsigned long get_sdram_size(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 #define CONFIG_USB_EHCI
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index a6601fee86..6170cbc81f 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -38,7 +38,7 @@
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 
@@ -625,7 +625,6 @@ combinations. this should be removed later
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index 4a5fc864a6..0bb22be9f3 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -149,6 +149,9 @@
 #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
 #define CONFIG_SYS_NAND_QUIET          1
 
+#define CONFIG_SYS_NAND_MAX_OOBFREE	2
+#define CONFIG_SYS_NAND_MAX_ECCPOS	48
+
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index 2d7fc59ea2..71be1224f1 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -406,7 +406,6 @@ int du440_phy_addr(int devnum);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 #define CONFIG_SOURCE		1
diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index f366308f45..208b599f6d 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -186,6 +186,5 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 #endif	/* __CONFIG_H */
diff --git a/include/configs/JSE.h b/include/configs/JSE.h
index 4284d6a3a9..5738ea97ad 100644
--- a/include/configs/JSE.h
+++ b/include/configs/JSE.h
@@ -274,6 +274,5 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 #endif	/* __CONFIG_H */
diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 71e90d77d7..39eb2ef133 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -273,7 +273,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE  230400	     /* kgdb serial port baud	*/
-#define CONFIG_KGDB_SER_INDEX 2		     /* kgdb serial port	*/
 #endif
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h
index 32ec0bf065..67154353d3 100644
--- a/include/configs/METROBOX.h
+++ b/include/configs/METROBOX.h
@@ -338,7 +338,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE  230400	     /* kgdb serial port baud	*/
-#define CONFIG_KGDB_SER_INDEX 2		     /* kgdb serial port	*/
 #endif
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index f248a56421..6042a1e3c4 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -396,7 +396,6 @@
  ************************************************************/
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /************************************************************
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 0f9f436e33..aedb529f86 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -634,7 +634,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index a1e5f3b2b2..c4c771b502 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -481,7 +481,6 @@
 
 #if (CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 71fc497e78..f5b62025d6 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -574,7 +574,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 037484104f..7640d06ee7 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -737,7 +737,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index e2ae596323..ffb9a158ae 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -730,7 +730,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index ed780f17ff..d4c82cd669 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -683,7 +683,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index d31be19735..01e7ac7681 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -544,7 +544,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 98ffb9c29e..f52e77a3a7 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -662,7 +662,6 @@ extern int board_pci_host_broken(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index ca28c0eb24..938f7ab3c4 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -678,7 +678,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 9ab1bc106b..9b7cc6474c 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -740,7 +740,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 046b14bdda..2d42b25121 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -397,7 +397,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index eca3b537b4..b9ad034225 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -410,7 +410,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 8132ec055b..90fc2da34b 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -441,7 +441,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 6acd54db85..5fff1e2cac 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -535,7 +535,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 5ffdd01629..23c6b07c35 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -408,7 +408,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index bb9ae2dcb5..44b767919e 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -438,7 +438,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 7406ac3be8..4f438a8075 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -430,7 +430,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index df5572b3a8..d877e8bbd1 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -566,7 +566,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 63480ecb0d..44d83a236e 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -682,7 +682,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index 41ebe31dd4..f930fcde34 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -517,7 +517,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 0e666bac01..65d61c28d1 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -670,7 +670,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_CMD_KGDB)
     #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-    #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h
index 9fd4551426..88df94f112 100644
--- a/include/configs/MigoR.h
+++ b/include/configs/MigoR.h
@@ -10,8 +10,6 @@
 #define __MIGO_R_H
 
 #undef DEBUG
-#define CONFIG_SH		1
-#define CONFIG_SH4		1
 #define CONFIG_CPU_SH7722	1
 #define CONFIG_MIGO_R		1
 
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 1ed5e1df21..ea5cb6501b 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -37,7 +37,7 @@
 #define CONFIG_SPL_INIT_MINIMAL
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 
@@ -739,7 +739,6 @@ extern unsigned long get_sdram_size(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 262c3e5f1f..934a6cb7a6 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -75,6 +75,8 @@
 #endif
 
 #define CONFIG_NAND_FSL_ELBC
+#define CONFIG_SYS_NAND_MAX_ECCPOS	56
+#define CONFIG_SYS_NAND_MAX_OOBFREE	5
 
 #ifdef CONFIG_NAND
 #define CONFIG_SPL
@@ -725,7 +727,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index 2aa1f59ea7..11c74ff5f5 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -469,7 +469,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index b592c1966a..85cb0767ef 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -606,7 +606,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/P2020COME.h b/include/configs/P2020COME.h
index 15d2a43cd0..ce3c762559 100644
--- a/include/configs/P2020COME.h
+++ b/include/configs/P2020COME.h
@@ -432,7 +432,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 9d3d9b33e5..ada6c7b871 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -670,7 +670,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index b238574b5d..ee71252b00 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -677,7 +677,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 1180724862..29888b4e1c 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -353,7 +353,6 @@
  ************************************************************/
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /************************************************************
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index 5ab9315b1d..efe69601f3 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -492,7 +492,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /* pass open firmware flat tree */
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 43a5778004..7d0bc043f9 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -233,6 +233,7 @@ unsigned long get_board_ddr_clk(void);
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
+#define	QIXIS_RST_FORCE_MEM		0x01
 
 #define CONFIG_SYS_CSPR3_EXT	(0xf)
 #define CONFIG_SYS_CSPR3	(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
@@ -248,7 +249,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_CS3_FTIM1		(FTIM1_GPCM_TACO(0xff) | \
 					FTIM1_GPCM_TRAD(0x3f))
 #define CONFIG_SYS_CS3_FTIM2		(FTIM2_GPCM_TCS(0x0e) | \
-					FTIM2_GPCM_TCH(0x0) | \
+					FTIM2_GPCM_TCH(0x8) | \
 					FTIM2_GPCM_TWP(0x1f))
 #define CONFIG_SYS_CS3_FTIM3		0x0
 
@@ -682,7 +683,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/T1040RDB.h b/include/configs/T1040RDB.h
index 79312311d8..d721139a1f 100644
--- a/include/configs/T1040RDB.h
+++ b/include/configs/T1040RDB.h
@@ -609,7 +609,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/T1042RDB_PI.h b/include/configs/T1042RDB_PI.h
index eff08e3804..2c02d9da58 100644
--- a/include/configs/T1042RDB_PI.h
+++ b/include/configs/T1042RDB_PI.h
@@ -613,7 +613,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index fc254256a0..15cf2bd793 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -495,7 +495,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 57b620d481..d40185e1e2 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -138,8 +138,6 @@
 #if defined(CONFIG_CMD_KGDB)
 /* speed to run kgdb serial port */
 #define CONFIG_KGDB_BAUDRATE		115200
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /* Miscellaneous configurable options */
diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h
index 8fda1b1ea5..00a24ab846 100644
--- a/include/configs/W7OLMC.h
+++ b/include/configs/W7OLMC.h
@@ -301,7 +301,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use	*/
 #endif
 
 /*
diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 6836fc7b5f..8ed2fa2d87 100644
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -304,7 +304,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use	*/
 #endif
 
 /*
diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h
index 1205557d88..d6cef888c6 100644
--- a/include/configs/ac14xx.h
+++ b/include/configs/ac14xx.h
@@ -471,7 +471,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE		230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/actux1.h b/include/configs/actux1.h
index 3315f54f38..9b8bd78943 100644
--- a/include/configs/actux1.h
+++ b/include/configs/actux1.h
@@ -58,8 +58,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX		1
 #endif
 
 /* Miscellaneous configurable options */
diff --git a/include/configs/actux2.h b/include/configs/actux2.h
index fb391ecd59..f0cbff79ca 100644
--- a/include/configs/actux2.h
+++ b/include/configs/actux2.h
@@ -51,8 +51,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX		1
 #endif
 
 /* Miscellaneous configurable options */
diff --git a/include/configs/actux3.h b/include/configs/actux3.h
index 61d96f5ed0..763910745c 100644
--- a/include/configs/actux3.h
+++ b/include/configs/actux3.h
@@ -49,8 +49,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX		1
 #endif
 
 /* Miscellaneous configurable options */
diff --git a/include/configs/actux4.h b/include/configs/actux4.h
index 23872794e3..12bd98a7e1 100644
--- a/include/configs/actux4.h
+++ b/include/configs/actux4.h
@@ -56,8 +56,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX		1
 #endif
 
 /* Miscellaneous configurable options */
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index 61fdebac3f..08bba36095 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -349,7 +349,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /* pass open firmware flat tree */
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index c9e9a038d4..0f38c92fa0 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -125,7 +125,6 @@
  */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
 #endif
 
 /*
diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h
index 933de52c56..462b2e2910 100644
--- a/include/configs/ap325rxa.h
+++ b/include/configs/ap325rxa.h
@@ -11,8 +11,6 @@
 #define __AP325RXA_H
 
 #undef DEBUG
-#define CONFIG_SH		1
-#define CONFIG_SH4		1
 #define CONFIG_CPU_SH7723	1
 #define CONFIG_AP325RXA	1
 
diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h
index 83a5c37e43..bb39491f8b 100644
--- a/include/configs/ap_sh4a_4a.h
+++ b/include/configs/ap_sh4a_4a.h
@@ -10,9 +10,6 @@
 #define __AP_SH4A_4A_H
 
 #undef DEBUG
-#define CONFIG_SH		1
-#define CONFIG_SH4		1
-#define CONFIG_SH4A		1
 #define CONFIG_CPU_SH7734	1
 #define CONFIG_AP_SH4A_4A	1
 #define CONFIG_400MHZ_MODE	1
diff --git a/include/configs/aria.h b/include/configs/aria.h
index 32216cd50e..b8d955abd0 100644
--- a/include/configs/aria.h
+++ b/include/configs/aria.h
@@ -507,7 +507,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE		230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index b7fb29ea72..7e367f39b2 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -85,6 +85,7 @@
 #define CONFIG_DWMMC
 #define CONFIG_EXYNOS_DWMMC
 #define CONFIG_SUPPORT_EMMC_BOOT
+#define CONFIG_BOUNCE_BUFFER
 
 
 #define CONFIG_BOARD_EARLY_INIT_F
diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h
index d3d62744fa..b41a823600 100644
--- a/include/configs/balloon3.h
+++ b/include/configs/balloon3.h
@@ -61,7 +61,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/bf506f-ezkit.h b/include/configs/bf506f-ezkit.h
index 5ad3ee70d4..eed2d5bcef 100644
--- a/include/configs/bf506f-ezkit.h
+++ b/include/configs/bf506f-ezkit.h
@@ -56,6 +56,7 @@
 /*
  * Flash Settings
  */
+
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_BASE		0x20000000
 #define CONFIG_SYS_FLASH_CFI
@@ -63,7 +64,9 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	71
 #define CONFIG_CMD_FLASH
 #define CONFIG_MONITOR_IS_IN_RAM
-
+/*
+#define CONFIG_SYS_NO_FLASH
+*/
 
 /*
  * SPI Settings
@@ -71,11 +74,12 @@
 #define CONFIG_BFIN_SPI
 #define CONFIG_ENV_SPI_MAX_HZ	30000000
 #define CONFIG_SF_DEFAULT_SPEED	30000000
+/*
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SPI
-
+*/
 
 /*
  * Env Storage Settings
diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h
index ee585c0ffd..15ca1af230 100644
--- a/include/configs/bf561-acvilon.h
+++ b/include/configs/bf561-acvilon.h
@@ -53,7 +53,7 @@
 #define CONFIG_EBIU_AMBCTL0_VAL		0xffc2ffc2
 #define CONFIG_EBIU_AMBCTL1_VAL		0x99b35554
 
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024)
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024)
 
 
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 404039ac23..fb6f94873a 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -90,6 +90,7 @@
  */
 #define CONFIG_SYS_I2C_SOFT
 #ifdef CONFIG_SYS_I2C_SOFT
+#define CONFIG_SYS_I2C
 #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
 #define I2C_DELAY		udelay(5)	/* 1/4 I2C clock duration */
diff --git a/include/configs/blackvme.h b/include/configs/blackvme.h
index cd37f9adb9..6e5774c6ba 100644
--- a/include/configs/blackvme.h
+++ b/include/configs/blackvme.h
@@ -177,6 +177,7 @@
 #define CONFIG_BAUDRATE		57600
 #define CONFIG_LOADS_ECHO	1
 #define CONFIG_UART_CONSOLE	0
+#define CONFIG_BFIN_SERIAL
 
 /*
  * U-Boot environment variables. Use "printenv" to examine.
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index c1042aecbf..8182a7577b 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -236,6 +236,8 @@
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
 #define CONFIG_SYS_NAND_ECCSIZE		0x200
 #define CONFIG_SYS_NAND_ECCBYTES	10
+#define CONFIG_SYS_NAND_MAX_OOBFREE	2
+#define CONFIG_SYS_NAND_MAX_ECCPOS	56
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 
diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h
index 8f10eba467..2838012e20 100644
--- a/include/configs/cm-bf537e.h
+++ b/include/configs/cm-bf537e.h
@@ -55,7 +55,7 @@
 #define CONFIG_EBIU_AMBCTL0_VAL	(B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
 #define CONFIG_EBIU_AMBCTL1_VAL	(B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
 
-#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(128 * 1024)
 
 
@@ -145,7 +145,7 @@
 #define FLASHBOOT_ENV_SETTINGS \
 	"flashboot=flread 20040000 1000000 3c0000;" \
 	"bootm 0x1000000\0"
-
+#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024))
 
 /*
  * Pull in common ADI header for remaining command/environment setup
diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h
index a1c8e8a856..da4cc6718d 100644
--- a/include/configs/cm-bf537u.h
+++ b/include/configs/cm-bf537u.h
@@ -54,7 +54,7 @@
 #define CONFIG_EBIU_AMBCTL0_VAL	(B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
 #define CONFIG_EBIU_AMBCTL1_VAL	(B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
 
-#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(128 * 1024)
 
 
@@ -142,6 +142,7 @@
 #define FLASHBOOT_ENV_SETTINGS \
 	"flashboot=flread 20040000 1000000 300000;" \
 	"bootm 0x1000000\0"
+#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024))
 
 
 /*
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 4640c431dc..7729a02ab6 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -316,6 +316,7 @@
 
 /* Display Configuration */
 #define CONFIG_OMAP3_GPIO_2
+#define CONFIG_OMAP3_GPIO_5
 #define CONFIG_VIDEO_OMAP3
 #define LCD_BPP		LCD_COLOR16
 
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index 556b42a38b..d1d732f211 100644
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -204,7 +204,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE			115200
-#define CONFIG_KGDB_SER_INDEX			2
 #endif
 
 /*
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 665295c1a2..969b9903fb 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -672,7 +672,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
index ca0bffa72e..8a848bea8b 100644
--- a/include/configs/csb272.h
+++ b/include/configs/csb272.h
@@ -99,7 +99,6 @@
  */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/csb472.h b/include/configs/csb472.h
index 596095d21f..5c034175ce 100644
--- a/include/configs/csb472.h
+++ b/include/configs/csb472.h
@@ -98,7 +98,6 @@
  */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 48b47cbd0b..f210ed8b92 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -60,6 +60,7 @@
 #define CONFIG_SPI_FLASH_SPANSION
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH_BAR
 #define CONFIG_TI_SPI_MMAP
 #define CONFIG_SF_DEFAULT_SPEED                48000000
 #define CONFIG_DEFAULT_SPI_MODE                SPI_MODE_3
diff --git a/include/configs/dvlhost.h b/include/configs/dvlhost.h
index 87b3314841..1af7f16989 100644
--- a/include/configs/dvlhost.h
+++ b/include/configs/dvlhost.h
@@ -57,8 +57,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 # define CONFIG_KGDB_BAUDRATE		230400
-/* which serial port to use */
-# define CONFIG_KGDB_SER_INDEX		1
 #endif
 
 /* Miscellaneous configurable options */
diff --git a/include/configs/ecovec.h b/include/configs/ecovec.h
index 3483cf1f58..3a5cc74829 100644
--- a/include/configs/ecovec.h
+++ b/include/configs/ecovec.h
@@ -23,9 +23,6 @@
  */
 
 #undef DEBUG
-#define CONFIG_SH		1
-#define CONFIG_SH4		1
-#define CONFIG_SH4A		1
 #define CONFIG_CPU_SH7724	1
 #define CONFIG_BOARD_LATE_INIT		1
 #define CONFIG_ECOVEC		1
diff --git a/include/configs/espt.h b/include/configs/espt.h
index 1bd7eeceb9..de16be70b2 100644
--- a/include/configs/espt.h
+++ b/include/configs/espt.h
@@ -10,8 +10,6 @@
 #ifndef __ESPT_H
 #define __ESPT_H
 
-#define CONFIG_SH		1
-#define CONFIG_SH4		1
 #define CONFIG_CPU_SH7763	1
 #define CONFIG_ESPT	1
 #define __LITTLE_ENDIAN		1
diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h
index d684790f8e..414db420dc 100644
--- a/include/configs/exynos5-dt.h
+++ b/include/configs/exynos5-dt.h
@@ -98,6 +98,7 @@
 #define CONFIG_DWMMC
 #define CONFIG_EXYNOS_DWMMC
 #define CONFIG_SUPPORT_EMMC_BOOT
+#define CONFIG_BOUNCE_BUFFER
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h
index 7fa0c5356c..186fd35fdb 100644
--- a/include/configs/ib62x0.h
+++ b/include/configs/ib62x0.h
@@ -28,6 +28,11 @@
 #define CONFIG_MACH_TYPE	MACH_TYPE_NAS6210
 
 /*
+ * Enable device tree support
+ */
+#define CONFIG_OF_LIBFDT
+
+/*
  * Compression configuration
  */
 #define CONFIG_BZIP2
@@ -41,6 +46,7 @@
 #define CONFIG_SYS_MVFS
 #include <config_cmd_default.h>
 #define CONFIG_CMD_ENV
+#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
@@ -66,7 +72,7 @@
 #define CONFIG_ENV_IS_NOWHERE
 #endif
 #define CONFIG_ENV_SIZE		0x20000
-#define CONFIG_ENV_OFFSET	0x80000
+#define CONFIG_ENV_OFFSET	0xe0000
 
 /*
  * Default environment variables
@@ -74,24 +80,26 @@
 #define CONFIG_BOOTCOMMAND \
 	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; "	\
 	"ubi part root; "						\
-	"ubifsmount ubi:root; "						\
+	"ubifsmount ubi:rootfs; "					\
 	"ubifsload 0x800000 ${kernel}; "				\
-	"ubifsload 0x1100000 ${initrd}; "				\
-	"bootm 0x800000 0x1100000"
-
-#define CONFIG_MTDPARTS				\
-	"mtdparts=orion_nand:"			\
-	"0x80000@0x0(uboot),"			\
-	"0x20000@0x80000(uboot_env),"		\
-	"-@0xa0000(root)\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"ubifsload 0x700000 ${fdt}; "					\
+	"ubifsumount; "							\
+	"fdt addr 0x700000; fdt resize; fdt chosen; "			\
+	"bootz 0x800000 - 0x700000"
+
+#define CONFIG_MTDPARTS \
+	"mtdparts=orion_nand:"						\
+	"0xe0000@0x0(uboot),"						\
+	"0x20000@0xe0000(uboot_env),"					\
+	"-@0x100000(root)\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
 	"console=console=ttyS0,115200\0"				\
 	"mtdids=nand0=orion_nand\0"					\
 	"mtdparts="CONFIG_MTDPARTS					\
-	"kernel=/boot/uImage\0"						\
-	"initrd=/boot/uInitrd\0"					\
-	"bootargs_root=ubi.mtd=2 root=ubi0:root rootfstype=ubifs\0"
+	"kernel=/boot/zImage\0"						\
+	"fdt=/boot/ib62x0.dtb\0"					\
+	"bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
 
 /*
  * Ethernet driver configuration
diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h
index 7700b38c2d..50330ccf6e 100644
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -385,7 +385,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 #define __USB_PHY_TYPE	utmi
diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h
index 0e6073c642..74c72325f6 100644
--- a/include/configs/km_kirkwood.h
+++ b/include/configs/km_kirkwood.h
@@ -35,6 +35,16 @@
 #define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
 #define CONFIG_KM_FPGA_CONFIG
 
+/* KM_KIRKWOOD_128M16 */
+#elif defined(CONFIG_KM_KIRKWOOD_128M16)
+#define CONFIG_IDENT_STRING		"\nKeymile Kirkwood 128M16"
+#define CONFIG_HOSTNAME			km_kirkwood_128m16
+#undef CONFIG_SYS_KWD_CONFIG
+#define CONFIG_SYS_KWD_CONFIG \
+		$(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
+#define CONFIG_KM_DISABLE_PCIE
+#define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
+
 /* KM_NUSA */
 #elif defined(CONFIG_KM_NUSA)
 #define CONFIG_KM_IVM_BUS		1	/* I2C2 (Mux-Port 1)*/
diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h
index f8cca5b281..cc3c7a8e6a 100644
--- a/include/configs/koelsch.h
+++ b/include/configs/koelsch.h
@@ -31,7 +31,16 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_BOOTZ
+
+#if defined(CONFIG_SYS_USE_BOOT_NORFLASH)
 #define	CONFIG_CMD_FLASH
+#define CONFIG_SYS_TEXT_BASE	0x00000000
+#else
+/* SPI flash boot is default. */
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SYS_TEXT_BASE	0xE6304000
+#endif
 
 #define	CONFIG_CMDLINE_TAG
 #define	CONFIG_SETUP_MEMORY_TAGS
@@ -101,7 +110,7 @@
 #define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 
 /* FLASH */
-#define CONFIG_SYS_TEXT_BASE	0x00000000
+#if defined(CONFIG_SYS_USE_BOOT_NORFLASH)
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #define	CONFIG_FLASH_CFI_DRIVER
@@ -117,13 +126,28 @@
 #define CONFIG_SYS_FLASH_WRITE_TOUT	3000
 #define CONFIG_SYS_FLASH_LOCK_TOUT	3000
 #define CONFIG_SYS_FLASH_UNLOCK_TOUT	3000
-
 /* ENV setting */
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_OVERWRITE	1
-#define CONFIG_ENV_SECT_SIZE	(256 * 1024)
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + \
 				 CONFIG_SYS_MONITOR_LEN)
+
+#else /* CONFIG_SYS_USE_BOOT_NORFLASH */
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SPI
+#define CONFIG_SH_QSPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SPI_FLASH_SPANSION
+/* ENV setting */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_ADDR	0xC0000
+
+#endif /* CONFIG_SYS_USE_BOOT_NORFLASH */
+
+/* Common ENV setting */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_SECT_SIZE	(256 * 1024)
 #define CONFIG_ENV_OFFSET	(CONFIG_ENV_ADDR)
 #define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_SYS_MONITOR_LEN)
diff --git a/include/configs/korat.h b/include/configs/korat.h
index b09af199c8..811ff995e2 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -542,7 +542,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400 /* speed to run kgdb serial port	*/
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
 #endif
 
 /* Pass open firmware flat tree */
diff --git a/include/configs/lager.h b/include/configs/lager.h
index 893282540e..b6c1954a94 100644
--- a/include/configs/lager.h
+++ b/include/configs/lager.h
@@ -34,7 +34,15 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_BOOTZ
-#define	CONFIG_CMD_FLASH
+
+#if defined(CONFIG_SYS_USE_BOOT_NORFLASH)
+#define CONFIG_CMD_FLASH
+#define CONFIG_SYS_TEXT_BASE	0x00000000
+#else
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SYS_TEXT_BASE	0xE8080000
+#endif
 
 #define	CONFIG_CMDLINE_TAG
 #define	CONFIG_SETUP_MEMORY_TAGS
@@ -104,8 +112,8 @@
 #define CONFIG_SYS_GBL_DATA_SIZE	(256)
 #define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
 
+#if defined(CONFIG_SYS_USE_BOOT_NORFLASH)
 /* USE NOR FLASH */
-#define CONFIG_SYS_TEXT_BASE	0x00000000
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #define	CONFIG_FLASH_CFI_DRIVER
@@ -124,10 +132,27 @@
 
 /* ENV setting */
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_OVERWRITE	1
-#define CONFIG_ENV_SECT_SIZE	(256 * 1024)
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + \
 				 CONFIG_SYS_MONITOR_LEN)
+
+#else /* CONFIG_SYS_USE_BOOT_NORFLASH */
+
+/* USE SPI */
+#define CONFIG_SPI
+#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SH_QSPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SYS_NO_FLASH
+
+/* ENV setting */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_ADDR	0xC0000
+#endif
+
+/* Common ENV setting */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_SECT_SIZE	(256 * 1024)
 #define CONFIG_ENV_OFFSET	(CONFIG_ENV_ADDR)
 #define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_SYS_MONITOR_LEN)
diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h
deleted file mode 100644
index fcd809dfbf..0000000000
--- a/include/configs/linkstation.h
+++ /dev/null
@@ -1,504 +0,0 @@
-/*
- * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Valid values for CONFIG_SYS_TEXT_BASE are:
- *
- * Standard configuration - all models
- * 0xFFF00000	boot from flash
- *
- * Test configuration (boot from RAM using uloader.o)
- * LinkStation HD-HLAN and KuroBox Standard
- * 0x03F00000	boot from RAM
- * LinkStation HD-HGLAN and KuroBox HG
- * 0x07F00000	boot from RAM
- */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xFFF00000
-#endif
-
-#if 0
-#define DEBUG
-#endif
-
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
-
-/*-----------------------------------------------------------------------
- * User configurable settings:
- *   Mandatory settings:
- *     CONFIG_IPADDR_LS		- the IP address of the LinkStation
- *     CONFIG_SERVERIP_LS	- the address of the server for NFS/TFTP/DHCP/BOOTP
- *   Optional settins:
- *     CONFIG_NCIP_LS		- the adress of the computer running net console
- *							  if not configured, it will be set to
- *							  CONFIG_SERVERIP_LS
- */
-
-
-#define CONFIG_IPADDR_LS	192.168.11.150
-#define CONFIG_SERVERIP_LS	192.168.11.149
-
-#if !defined(CONFIG_IPADDR_LS) || !defined(CONFIG_SERVERIP_LS)
-#error Both CONFIG_IPADDR_LS and CONFIG_SERVERIP_LS must be defined
-#endif
-
-#if !defined(CONFIG_NCIP_LS)
-#define CONFIG_NCIP_LS		CONFIG_SERVERIP_LS
-#endif
-
-/*----------------------------------------------------------------------
- * DO NOT CHANGE ANYTHING BELOW, UNLESS YOU KNOW WHAT YOU ARE DOING
- *---------------------------------------------------------------------*/
-
-#define CONFIG_MPC8245		1
-#define CONFIG_LINKSTATION	1
-
-/*---------------------------------------
- * Supported models
- *
- * LinkStation HDLAN /KuroBox Standard (CONFIG_HLAN)
- * LinkStation old model               (CONFIG_LAN) - totally untested
- * LinkStation HGLAN / KuroBox HG      (CONFIG_HGLAN)
- *
- * Models not supported yet
- * TeraStatin                          (CONFIG_HTGL)
- */
-
-#if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
-#define CONFIG_IDENT_STRING		" LinkStation / KuroBox"
-#elif defined(CONFIG_HGLAN)
-#define CONFIG_IDENT_STRING		" LinkStation HG / KuroBox HG"
-#elif defined(CONFIG_HTGL)
-#define CONFIG_IDENT_STRING		" TeraStation"
-#else
-#error No LinkStation model defined
-#endif
-
-#define CONFIG_BOOTDELAY	5
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#undef CONFIG_BOOT_RETRY_TIME
-
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT		\
-	"Boot in %02d seconds ('s' to stop)...", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR	"s"
-
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_EXT2
-
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_NISDOMAIN
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_NTPSERVER
-#define CONFIG_BOOTP_TIMEOFFSET
-
-#define CONFIG_OF_LIBFDT	1
-
-#define OF_STDOUT_PATH		"/soc10x/serial@80004600"
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <config_cmd_default.h>
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16		/* Max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_LOAD_ADDR		0x00800000	/* Default load address: 8 MB	*/
-
-#define CONFIG_BOOTCOMMAND	"run bootcmd1"
-#define CONFIG_BOOTARGS		"root=/dev/sda1 console=ttyS1,57600 netconsole=@192.168.1.7/eth0,@192.168.1.1/00:50:BF:A4:59:71 rtc-rs5c372.probe=0,0x32 debug"
-#define CONFIG_NFSBOOTCOMMAND	"bootp;run nfsargs;bootm"
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-#if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
-#define UBFILE			"share/u-boot/u-boot-hd.flash.bin"
-#elif defined(CONFIG_HGLAN)
-#define UBFILE			"share/u-boot/u-boot-hg.flash.bin"
-#elif defined(CONFIG_HTGL)
-#define UBFILE			"share/u-boot/u-boot-ht.flash.bin"
-#else
-#error No LinkStation model defined
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS						\
-	"autoload=no\0"								\
-	"stdin=nc\0"								\
-	"stdout=nc\0"								\
-	"stderr=nc\0"								\
-	"ipaddr="__stringify(CONFIG_IPADDR_LS)"\0"			\
-	"netmask=255.255.255.0\0"						\
-	"serverip="__stringify(CONFIG_SERVERIP_LS)"\0"			\
-	"ncip="__stringify(CONFIG_NCIP_LS)"\0"				\
-	"netretry=no\0"								\
-	"nc=setenv stdin nc;setenv stdout nc;setenv stderr nc\0"		\
-	"ser=setenv stdin serial;setenv stdout serial;setenv stderr serial\0"	\
-	"ldaddr=800000\0"							\
-	"hdpart=0:1\0"								\
-	"hdfile=boot/uImage\0"							\
-	"hdload=echo Loading ${hdpart}:${hdfile};ext2load ide ${hdpart} ${ldaddr} ${hdfile};ext2load ide ${hdpart} 7f0000 boot/kuroboxHG.dtb\0"	\
-	"boothd=setenv bootargs " CONFIG_BOOTARGS ";bootm ${ldaddr} - 7f0000\0"	\
-	"hdboot=run hdload;run boothd\0"					\
-	"flboot=setenv bootargs root=/dev/hda1;bootm ffc00000\0"		\
-	"emboot=setenv bootargs root=/dev/ram0;bootm ffc00000\0"		\
-	"nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0"	\
-	"bootretry=30\0"							\
-	"bootcmd1=run hdboot;run flboot\0"					\
-	"bootcmd2=run flboot\0"							\
-	"bootcmd3=run emboot\0"							\
-	"writeng=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4e474e47 1;cp.b 800000 fff70000 4\0" \
-	"writeok=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4f4b4f4b 1;cp.b 800000 fff70000 4\0" \
-	"ubpart=0:3\0"								\
-	"ubfile="UBFILE"\0"							\
-	"ubload=echo Loading ${ubpart}:${ubfile};ext2load ide ${ubpart} ${ldaddr} ${ubfile}\0" \
-	"ubsaddr=fff00000\0"							\
-	"ubeaddr=fff2ffff\0"							\
-	"ubflash=protect off ${ubsaddr} ${ubeaddr};era ${ubsaddr} ${ubeaddr};cp.b ${ldaddr} ${ubsaddr} ${filesize};cmp.b ${ldaddr} ${ubsaddr} ${filesize}\0" \
-	"upgrade=run ubload ubflash\0"
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- */
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-/* Verified: CONFIG_PCI_PNP doesn't work */
-#undef CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW
-
-#ifndef CONFIG_PCI_PNP
-/* Keep the following defines in sync with the BAT mappings */
-
-#define PCI_ETH_IOADDR      0xbfff00
-#define PCI_ETH_MEMADDR     0xbffffc00
-#define PCI_IDE_IOADDR      0xbffed0
-#define PCI_IDE_MEMADDR     0xbffffb00
-#define PCI_USB0_IOADDR     0
-#define PCI_USB0_MEMADDR    0xbfffe000
-#define PCI_USB1_IOADDR     0
-#define PCI_USB1_MEMADDR    0xbfffd000
-#define PCI_USB2_IOADDR     0
-#define PCI_USB2_MEMADDR    0xbfffcf00
-
-#endif
-
-/*-----------------------------------------------------------------------
- * Ethernet stuff
- */
-
-#if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
-#define CONFIG_TULIP
-#define CONFIG_TULIP_USE_IO
-#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CONFIG_RTL8169
-#endif
-
-#define CONFIG_NET_RETRY_COUNT		5
-
-#define CONFIG_NETCONSOLE
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-
-#define CONFIG_SYS_FLASH_BASE		0xFFC00000
-#define CONFIG_SYS_FLASH_SIZE		0x00400000
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
-#define CONFIG_SYS_EUMB_ADDR		0x80000000
-#define CONFIG_SYS_PCI_MEM_ADDR	0xB0000000
-#define CONFIG_SYS_MISC_REGION_ADDR	0xFE000000
-
-#define CONFIG_SYS_MONITOR_LEN		0x00040000	/* 256 kB			*/
-#define CONFIG_SYS_MALLOC_LEN		(512 << 10)	/* Reserve some kB for malloc()	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END		0x00800000	/* 1M ... 8M in DRAM		*/
-
-/* Maximum amount of RAM */
-#if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
-#define CONFIG_SYS_MAX_RAM_SIZE	0x04000000	/* 64MB of SDRAM  */
-#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CONFIG_SYS_MAX_RAM_SIZE	0x08000000	/* 128MB of SDRAM */
-#else
-#error Unknown LinkStation type
-#endif
-
-/*-----------------------------------------------------------------------
- * Change CONFIG_SYS_TEXT_BASE in bord/linkstation/config.mk to get a RAM build
- *
- * RAM based builds are for testing purposes. A Linux module, uloader.o,
- * exists to load U-Boot and pass control to it
- *
- * Always do "make clean" after changing the build type
- */
-#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-#if 1 /* RAM is available when the first C function is called */
-#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE - 0x1000)
-#else
-#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
-#endif
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*----------------------------------------------------------------------
- * Serial configuration
- */
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		57600
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_EUMB_ADDR + 0x4600)	/* Console port	*/
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_EUMB_ADDR + 0x4500)	/* AVR port	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8245 user's manual.
- *
- * Unless indicated otherwise, the values are
- * taken from the orignal Linkstation boot code
- *
- * Most of the low level configuration setttings are normally used
- * in arch/powerpc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
- * Low level initialisation is done in board/linkstation/early_init.S
- * The values below are included for reference purpose only
- */
-
-/* FIXME: 32.768 MHz is the crystal frequency but */
-/* the real frequency is lower by about 0.75%     */
-#define CONFIG_SYS_CLK_FREQ	32768000
-
-/* Bit-field values for MCCR1.  */
-#define CONFIG_SYS_ROMNAL      0
-#define CONFIG_SYS_ROMFAL      11
-
-#define CONFIG_SYS_BANK0_ROW	2       /* Only bank 0 used: 13 x n x 4 */
-#define CONFIG_SYS_BANK1_ROW	0
-#define CONFIG_SYS_BANK2_ROW	0
-#define CONFIG_SYS_BANK3_ROW	0
-#define CONFIG_SYS_BANK4_ROW	0
-#define CONFIG_SYS_BANK5_ROW	0
-#define CONFIG_SYS_BANK6_ROW	0
-#define CONFIG_SYS_BANK7_ROW	0
-
-/* Bit-field values for MCCR2.  */
-#define CONFIG_SYS_TSWAIT      0
-#if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
-#define CONFIG_SYS_REFINT      0x15e0
-#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CONFIG_SYS_REFINT      0x1580
-#endif
-
-/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
-#define CONFIG_SYS_BSTOPRE	0x91c
-
-/* Bit-field values for MCCR3.  */
-#define CONFIG_SYS_REFREC      7
-
-/* Bit-field values for MCCR4.  */
-#define CONFIG_SYS_PRETOACT		2
-#define CONFIG_SYS_ACTTOPRE		2	/* Original value was 2	*/
-#define CONFIG_SYS_ACTORW		2
-#if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
-#define CONFIG_SYS_SDMODE_CAS_LAT	2	/* For 100MHz bus	*/
-/*#define CONFIG_SYS_SDMODE_BURSTLEN	3*/
-#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* For 133MHz bus	*/
-/*#define CONFIG_SYS_SDMODE_BURSTLEN	2*/
-#endif
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM		1	/* Original setting but there is no EXTROM */
-#define CONFIG_SYS_REGDIMM		0
-#define CONFIG_SYS_DBUS_SIZE2		1
-#define CONFIG_SYS_SDMODE_WRAP		0
-
-#define CONFIG_SYS_PGMAX		0x32	/* All boards use this setting. Original 0x92 */
-#define CONFIG_SYS_SDRAM_DSCD		0x30
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these vales to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8240 book.
- */
-
-#define CONFIG_SYS_BANK0_START	    0x00000000
-#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE    1
-#define CONFIG_SYS_BANK1_START     0x3ff00000
-#define CONFIG_SYS_BANK1_END       0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE    0
-#define CONFIG_SYS_BANK2_START     0x3ff00000
-#define CONFIG_SYS_BANK2_END       0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE    0
-#define CONFIG_SYS_BANK3_START     0x3ff00000
-#define CONFIG_SYS_BANK3_END       0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE    0
-#define CONFIG_SYS_BANK4_START     0x3ff00000
-#define CONFIG_SYS_BANK4_END       0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE    0
-#define CONFIG_SYS_BANK5_START     0x3ff00000
-#define CONFIG_SYS_BANK5_END       0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE    0
-#define CONFIG_SYS_BANK6_START     0x3ff00000
-#define CONFIG_SYS_BANK6_END       0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE    0
-#define CONFIG_SYS_BANK7_START     0x3ff00000
-#define CONFIG_SYS_BANK7_END       0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE    0
-
-#define CONFIG_SYS_ODCR	    0x15
-
-/*----------------------------------------------------------------------
- * Initial BAT mappings
- */
-
-/* NOTES:
- * 1) GUARDED and WRITETHROUGH not allowed in IBATS
- * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
- */
-
-/* SDRAM */
-#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
-
-/* EUMB: 1MB of address space */
-#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_EUMB_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_EUMB_ADDR | BATU_BL_1M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT1L	(CONFIG_SYS_IBAT1L | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
-
-/* PCI Mem: 256MB of address space */
-#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_IBAT2L | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
-
-/* PCI and local ROM/Flash: last 32MB of address space */
-#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_MISC_REGION_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_MISC_REGION_ADDR | BATU_BL_32M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT3L	(CONFIG_SYS_IBAT3L | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- *
- * FIXME: This doesn't appear to be true for the newer kernels
- * which map more that 8 MB
- */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	*/
-#define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
-
-#undef  CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	72	/* Max number of sectors per flash	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	12000
-#define CONFIG_SYS_FLASH_WRITE_TOUT	1000
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
-
-#define CONFIG_ENV_IS_IN_FLASH
-/*
- * The original LinkStation flash organisation uses
- * 448 kB (0xFFF00000 - 0xFFF6FFFF) for the boot loader
- * We use the last sector of this area to store the environment
- * which leaves max. 384 kB for the U-Boot itself
- */
-#define CONFIG_ENV_ADDR		0xFFF60000
-#define CONFIG_ENV_SIZE		0x00010000
-#define CONFIG_ENV_SECT_SIZE	0x00010000
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * IDE/ATA definitions
- */
-#undef  CONFIG_IDE_LED				/* No IDE LED			*/
-#define CONFIG_IDE_RESET			/* no reset for ide supported	*/
-#define CONFIG_IDE_PREINIT			/* check for units		*/
-#define CONFIG_LBA48				/* 48 bit LBA supported		*/
-
-#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) || defined(CONFIG_HGLAN)
-#define CONFIG_SYS_IDE_MAXBUS		1		/* Scan only 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1		/* Only 1 drive per IDE bus	*/
-#elif defined(CONFIG_HGTL)
-#define CONFIG_SYS_IDE_MAXBUS		2		/* Max. 2 IDE busses		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	2		/* max. 2 drives per IDE bus	*/
-#else
-#error Config IDE: Unknown LinkStation type
-#endif
-
-#define CONFIG_SYS_ATA_BASE_ADDR	0
-
-#define CONFIG_SYS_ATA_DATA_OFFSET	0		/* Offset for data I/O		*/
-#define CONFIG_SYS_ATA_REG_OFFSET	0		/* Offset for normal registers	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0		/* Offset for alternate registers */
-
-/*-----------------------------------------------------------------------
- * Partitions and file system
- */
-#define CONFIG_DOS_PARTITION
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h
index 8e58fea3b3..a26937265a 100644
--- a/include/configs/lp8x4x.h
+++ b/include/configs/lp8x4x.h
@@ -93,7 +93,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index b87df5479d..4ffe165dec 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -86,7 +86,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index c348329cb1..e9c8d8fd55 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -660,7 +660,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	    /* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index 6501ea40e1..d415ecdb5a 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -364,7 +364,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 4a8adf6f33..38337b4564 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -520,7 +520,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/mpq101.h b/include/configs/mpq101.h
index ec09e15dbf..4cac8ee46a 100644
--- a/include/configs/mpq101.h
+++ b/include/configs/mpq101.h
@@ -345,7 +345,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 # define CONFIG_KGDB_BAUDRATE  230400 /* speed to run kgdb serial port */
-# define CONFIG_KGDB_SER_INDEX 2      /* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h
index fcf237edb9..8ae497c6d5 100644
--- a/include/configs/mpr2.h
+++ b/include/configs/mpr2.h
@@ -24,8 +24,6 @@
 #define CONFIG_VERSION_VARIABLE
 
 /* CPU and platform */
-#define CONFIG_SH		1
-#define CONFIG_SH3		1
 #define CONFIG_CPU_SH7720	1
 #define CONFIG_MPR2		1
 
diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h
index ec8523eb95..585d68f208 100644
--- a/include/configs/ms7720se.h
+++ b/include/configs/ms7720se.h
@@ -9,8 +9,6 @@
 #ifndef __MS7720SE_H
 #define __MS7720SE_H
 
-#define CONFIG_SH		1
-#define CONFIG_SH3		1
 #define CONFIG_CPU_SH7720	1
 #define CONFIG_MS7720SE		1
 
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
index 54fb7c3e86..1c8ada6c03 100644
--- a/include/configs/ms7722se.h
+++ b/include/configs/ms7722se.h
@@ -9,8 +9,6 @@
 #ifndef __MS7722SE_H
 #define __MS7722SE_H
 
-#define CONFIG_SH		1
-#define CONFIG_SH4		1
 #define CONFIG_CPU_SH7722	1
 #define CONFIG_MS7722SE		1
 
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
index eea3bd1f2c..4cf8efeca0 100644
--- a/include/configs/ms7750se.h
+++ b/include/configs/ms7750se.h
@@ -9,8 +9,6 @@
 #ifndef __MS7750SE_H
 #define __MS7750SE_H
 
-#define CONFIG_SH		1
-#define CONFIG_SH4		1
 #define CONFIG_CPU_SH7750	1
 /* #define CONFIG_CPU_SH7751	1 */
 /* #define CONFIG_CPU_TYPE_R	1 */
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
deleted file mode 100644
index c15d54631a..0000000000
--- a/include/configs/mx1ads.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * include/configs/mx1ads.h
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * This is the Configuration setting for Motorola MX1ADS board
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM920T		1	/* This is an ARM920T Core		*/
-#define CONFIG_IMX		1	/* It's a Motorola MC9328 SoC		*/
-#define CONFIG_MX1ADS		1	/* on a Motorola MX1ADS Board		*/
-
-/*
- * Select serial console configuration
-  */
-#define CONFIG_IMX_SERIAL
-#define CONFIG_IMX_SERIAL1		/* internal uart 1 */
-/* #define _CONFIG_UART2 */		/* internal uart 2 */
-/* #define CONFIG_SILENT_CONSOLE */	/* use this to disable output */
-
-#define CONFIG_BOARD_LATE_INIT
-#define USE_920T_MMU		1
-
-#if 0
-#define CONFIG_SYS_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
-#define CONFIG_SYS_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
-#define CONFIG_SYS_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
-#endif
-
-/*
- * Size of malloc() pool
- */
-
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- *  CS8900 Ethernet drivers
- */
-#define CONFIG_CS8900		/* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE	0x15000300
-#define CONFIG_CS8900_BUS16	/* the Linux driver does accesses as shorts */
-
-/*
- * select serial console configuration
- */
-
-/* #define CONFIG_UART1			*/
-/* #define CONFIG_UART2		1	*/
-
-#define CONFIG_BAUDRATE		115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_ELF
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTARGS		"root=/dev/msdk mem=48M"
-#define CONFIG_BOOTFILE		"mx1ads"
-#define CONFIG_BOOTCOMMAND	"tftp; bootm"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-						/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_HUSH_PARSER		1
-
-#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT		"MX1ADS$ "	/* Monitor Command Prompt */
-#else
-#define CONFIG_SYS_PROMPT		"MX1ADS=> "	/* Monitor Command Prompt */
-#endif
-
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-						/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x09000000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0AF00000	/* 63 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x08800000	/* default load address */
-#define CONFIG_SYS_HZ			3686400
-#define CONFIG_SYS_CPUSPEED		0x141
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of SDRAM	*/
-#define PHYS_SDRAM_1		0x08000000	/* SDRAM  on CSD0		*/
-#define PHYS_SDRAM_1_SIZE	0x04000000	/* 64 MB			*/
-
-#define CONFIG_SYS_TEXT_BASE	0x10000000
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x00300000
-#define CONFIG_SYS_INIT_RAM_SIZE	0x000FFFFF
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-						GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_INIT_RAM_ADDR + \
-						CONFIG_SYS_GBL_DATA_OFFSET)
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* 1 bank of SyncFlash		*/
-#define CONFIG_SYS_FLASH_BASE		0x0C000000	/* SyncFlash on CSD1		*/
-#define FLASH_BANK_SIZE		0x01000000	/* 16 MB Total			*/
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYNCFLASH	1
-#define PHYS_FLASH_SIZE		0x01000000
-#define CONFIG_SYS_MAX_FLASH_SECT	(16)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+0x00ff8000)
-
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SIZE		0x04000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE	0x100000
-
-/*-----------------------------------------------------------------------
- * Enable passing ATAGS
- */
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-
-#define CONFIG_SYS_CLK_FREQ 16780000
-#define CONFIG_SYSPLL_CLK_FREQ 16000000
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
deleted file mode 100644
index f749740815..0000000000
--- a/include/configs/omap3_zoom2.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * (C) Copyright 2006-2009
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <x0khasim@ti.com>
- * Nishanth Menon <nm@ti.com>
- * Tom Rix <Tom.Rix@windriver.com>
- *
- * Configuration settings for the TI OMAP3430 Zoom II board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP		1	/* in a TI OMAP core */
-#define CONFIG_OMAP34XX		1	/* which is a 34XX */
-#define CONFIG_OMAP3_ZOOM2	1	/* working with Zoom II */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
-
-#define CONFIG_SDRC	/* The chip has SDRC controller */
-
-#include <asm/arch/cpu.h>	/* get chip and board defs */
-#include <asm/arch/omap3.h>
-
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO		1
-#define CONFIG_DISPLAY_BOARDINFO	1
-
-/* Clock Defines */
-#define V_OSCK			26000000	/* Clock output from T2 */
-#define V_SCLK			(V_OSCK >> 1)
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-#define CONFIG_REVISION_TAG		1
-
-#define CONFIG_OF_LIBFDT		1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
-						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- * Zoom2 uses the TL16CP754C on the debug board
- */
-/*
- * 0 - 1 : first  USB with respect to the left edge of the debug board
- * 2 - 3 : second USB with respect to the left edge of the debug board
- */
-#define ZOOM2_DEFAULT_SERIAL_DEVICE	0
-
-#define V_NS16550_CLK			(1843200)	/* 1.8432 Mhz */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_REG_SIZE	(-2)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{115200}
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_GENERIC_MMC		1
-#define CONFIG_MMC			1
-#define CONFIG_OMAP_HSMMC		1
-#define CONFIG_DOS_PARTITION		1
-
-/* Status LED */
-#define CONFIG_STATUS_LED		1 /* Status LED enabled	*/
-#define CONFIG_BOARD_SPECIFIC_LED	1
-#define STATUS_LED_BLUE			0
-#define STATUS_LED_RED			1
-/* Blue */
-#define STATUS_LED_BIT			STATUS_LED_BLUE
-#define STATUS_LED_STATE		STATUS_LED_ON
-#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
-/* Red */
-#define STATUS_LED_BIT1			STATUS_LED_RED
-#define STATUS_LED_STATE1		STATUS_LED_OFF
-#define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 2)
-/* Optional value */
-#define STATUS_LED_BOOT			STATUS_LED_BIT
-
-/* GPIO banks */
-#ifdef CONFIG_STATUS_LED
-#define CONFIG_OMAP3_GPIO_2 /* ZOOM2_LED_BLUE2 */
-#define CONFIG_OMAP3_GPIO_6 /* ZOOM2_LED_RED */
-#endif
-#define CONFIG_OMAP3_GPIO_3 /* board revision */
-#define CONFIG_OMAP3_GPIO_5 /* debug board detection, ZOOM2_LED_BLUE */
-
-/* USB */
-#define CONFIG_MUSB_UDC			1
-#define CONFIG_USB_OMAP3		1
-#define CONFIG_TWL4030_USB		1
-
-/* USB device configuration */
-#define CONFIG_USB_DEVICE		1
-#define CONFIG_USB_TTY			1
-/* Change these to suit your needs */
-#define CONFIG_USBD_VENDORID		0x0451
-#define CONFIG_USBD_PRODUCTID		0x5678
-#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME	"Zoom2"
-
-/* commands to include */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_FAT			/* FAT support			*/
-#define CONFIG_CMD_I2C			/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC			/* MMC support			*/
-#define CONFIG_CMD_NAND			/* NAND support			*/
-#define CONFIG_CMD_NAND_LOCK_UNLOCK	/* Enable lock/unlock support	*/
-
-#undef CONFIG_CMD_FLASH			/* flinfo, erase, protect	*/
-#undef CONFIG_CMD_FPGA			/* FPGA configuration Support	*/
-#undef CONFIG_CMD_IMI			/* iminfo			*/
-#undef CONFIG_CMD_IMLS			/* List all found images	*/
-#undef CONFIG_CMD_NET			/* bootp, tftpboot, rarpboot	*/
-#undef CONFIG_CMD_NFS			/* NFS support			*/
-
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
-#define CONFIG_SYS_I2C_OMAP34XX
-
-/*
- * TWL4030
- */
-#define CONFIG_TWL4030_POWER		1
-#define CONFIG_TWL4030_LED		1
-
-/*
- * Board NAND Info.
- */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
-#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
-							/* to access nand at */
-							/* CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT	1
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-/* Environment information */
-#define CONFIG_BOOTDELAY		10
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"usbtty=cdc_acm\0" \
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_PROMPT		"OMAP3 Zoom2 # "
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE		512
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					 sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
-/* Memtest from start of memory to 31MB */
-#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
-#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + 0x01F00000)
-/* The default load address is the start of memory */
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)
-/* everything, incl board info, in Hz */
-#undef CONFIG_SYS_CLKS_IN_HZ
-/*
- * 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
- * 32KHz clk, or from external sig. This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV			7	/* 2^(PTV+1) */
-#define CONFIG_SYS_HZ			((V_SCLK) / (2 << CONFIG_SYS_PTV))
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-/* **** PISMO SUPPORT *** */
-
-/* Configure the PISMO */
-#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
-
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE		PISMO1_NAND_BASE
-#endif
-
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_ENV_IS_IN_NAND		1
-#define SMNAND_ENV_OFFSET		0x0c0000 /* environment starts here */
-
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
-
-#define CONFIG_SYS_CACHELINE_SIZE	64
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h
index c48790d2ae..376dfdb14c 100644
--- a/include/configs/omap5912osk.h
+++ b/include/configs/omap5912osk.h
@@ -94,7 +94,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	1	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 2f128b8a69..76c5106b45 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -36,6 +36,7 @@
 #define CONFIG_EFI_PARTITION
 #define CONFIG_PARTITION_UUIDS
 #define CONFIG_CMD_PART
+#define CONFIG_HSMMC2_8BIT
 
 /* Required support for the TCA642X GPIO we have on the uEVM */
 #define CONFIG_TCA642X
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 57ed019952..c6df11b8f1 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -928,7 +928,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index 3fde7ca3a3..1fdd602f5b 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -303,6 +303,5 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 #endif	/* __CONFIG_H */
diff --git a/include/configs/palmld.h b/include/configs/palmld.h
index a5b6e3aa95..2a9fd22dd6 100644
--- a/include/configs/palmld.h
+++ b/include/configs/palmld.h
@@ -93,7 +93,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h
index 7303e1c31f..de254076f2 100644
--- a/include/configs/palmtc.h
+++ b/include/configs/palmtc.h
@@ -95,7 +95,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h
index adf85190d1..36626639d3 100644
--- a/include/configs/palmtreo680.h
+++ b/include/configs/palmtreo680.h
@@ -94,7 +94,6 @@
  */
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE            230400  /* kgdb serial port speed */
-#define CONFIG_KGDB_SER_INDEX           2       /* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 400cb3e826..5a5fe7ff00 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -427,7 +427,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h
index 266d107e44..2a54e5cea0 100644
--- a/include/configs/pdm360ng.h
+++ b/include/configs/pdm360ng.h
@@ -441,7 +441,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /* POST support */
diff --git a/include/configs/pxa-common.h b/include/configs/pxa-common.h
index 5856ee180b..f0ecc34587 100644
--- a/include/configs/pxa-common.h
+++ b/include/configs/pxa-common.h
@@ -16,7 +16,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400
-#define	CONFIG_KGDB_SER_INDEX		2
 #endif
 
 /*
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index 84ad006acd..af7c076df0 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -199,7 +199,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h
index 7b04e0c3e3..20d6178dc1 100644
--- a/include/configs/quad100hd.h
+++ b/include/configs/quad100hd.h
@@ -265,7 +265,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /* ENVIRONMENT VARS */
diff --git a/include/configs/r0p7734.h b/include/configs/r0p7734.h
index dd26a71bcb..53128ecc12 100644
--- a/include/configs/r0p7734.h
+++ b/include/configs/r0p7734.h
@@ -10,9 +10,6 @@
 #define __R0P7734_H
 
 #undef DEBUG
-#define CONFIG_SH		1
-#define CONFIG_SH4		1
-#define CONFIG_SH4A		1
 #define CONFIG_CPU_SH7734	1
 #define CONFIG_R0P7734		1
 #define CONFIG_400MHZ_MODE	1
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index ddcc975874..24d0c34db6 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -3,8 +3,6 @@
 
 #undef DEBUG
 
-#define CONFIG_SH		1
-#define CONFIG_SH4		1
 #define CONFIG_CPU_SH7751	1
 #define CONFIG_CPU_SH_TYPE_R	1
 #define CONFIG_R2DPLUS		1
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index f5e4daab8f..8156724f7f 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -11,8 +11,6 @@
 #define __R7780RP_H
 
 #undef DEBUG
-#define CONFIG_SH		1
-#define CONFIG_SH4A		1
 #define CONFIG_CPU_SH7780	1
 #define CONFIG_R7780MP		1
 #define CONFIG_SYS_R7780MP_OLD_FLASH	1
diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h
index f144f84320..92318c3394 100644
--- a/include/configs/rsdproto.h
+++ b/include/configs/rsdproto.h
@@ -121,7 +121,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h
index acee4e8985..5436324580 100644
--- a/include/configs/rsk7203.h
+++ b/include/configs/rsk7203.h
@@ -11,8 +11,6 @@
 #define __RSK7203_H
 
 #undef DEBUG
-#define CONFIG_SH		1
-#define CONFIG_SH2		1
 #define CONFIG_SH2A		1
 #define CONFIG_CPU_SH7203	1
 #define CONFIG_RSK7203	1
@@ -87,7 +85,7 @@
 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
 #define CMT_CLK_DIVIDER	32	/* 8 (default), 32, 128 or 512 */
-#define CONFIG_SYS_HZ			(CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
+#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
 
 /* Network interface */
 #define CONFIG_SMC911X
diff --git a/include/configs/rsk7264.h b/include/configs/rsk7264.h
index a5dbb64f48..4aaa3ef74b 100644
--- a/include/configs/rsk7264.h
+++ b/include/configs/rsk7264.h
@@ -12,8 +12,6 @@
 #define __RSK7264_H
 
 #undef DEBUG
-#define CONFIG_SH		1
-#define CONFIG_SH2		1
 #define CONFIG_SH2A		1
 #define CONFIG_CPU_SH7264	1
 #define CONFIG_RSK7264		1
@@ -67,7 +65,7 @@
 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
 #define CMT_CLK_DIVIDER		32	/* 8 (default), 32, 128 or 512 */
-#define CONFIG_SYS_HZ		(CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
+#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
 
 /* Network interface */
 #define CONFIG_SMC911X
diff --git a/include/configs/rsk7269.h b/include/configs/rsk7269.h
index 9f54160afb..11fc231fa6 100644
--- a/include/configs/rsk7269.h
+++ b/include/configs/rsk7269.h
@@ -11,8 +11,6 @@
 #define __RSK7269_H
 
 #undef DEBUG
-#define CONFIG_SH		1
-#define CONFIG_SH2		1
 #define CONFIG_SH2A		1
 #define CONFIG_CPU_SH7269	1
 #define CONFIG_RSK7269		1
@@ -66,7 +64,7 @@
 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
 #define CMT_CLK_DIVIDER		32	/* 8 (default), 32, 128 or 512 */
-#define CONFIG_SYS_HZ		(CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
+#define CONFIG_SH_CMT_CLK_FREQ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
 
 /* Network interface */
 #define CONFIG_SMC911X
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 7e78a231d7..a6d55822b8 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -39,6 +39,9 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_CMD_PART
+#define CONFIG_DOS_PARTITION
+#define CONFIG_HOST_MAX_DEVICES 4
 
 #define CONFIG_SYS_VSNPRINTF
 
@@ -126,4 +129,6 @@
 #define CONFIG_LZO
 #define CONFIG_LZMA
 
+#define CONFIG_TPM_TIS_SANDBOX
+
 #endif
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index a258fe83dd..b7f83e0105 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -643,7 +643,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index bdb8eb529d..4912d69dcf 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -575,7 +575,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index dba948a5ce..78f8219c5f 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -523,7 +523,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/sh7752evb.h b/include/configs/sh7752evb.h
index ebdc5c8b05..f06abbca0c 100644
--- a/include/configs/sh7752evb.h
+++ b/include/configs/sh7752evb.h
@@ -10,8 +10,6 @@
 #define __SH7752EVB_H
 
 #undef DEBUG
-#define CONFIG_SH		1
-#define CONFIG_SH4A		1
 #define CONFIG_SH_32BIT		1
 #define CONFIG_CPU_SH7752	1
 #define CONFIG_SH7752EVB	1
diff --git a/include/configs/sh7753evb.h b/include/configs/sh7753evb.h
new file mode 100644
index 0000000000..e400db08ad
--- /dev/null
+++ b/include/configs/sh7753evb.h
@@ -0,0 +1,135 @@
+/*
+ * Configuation settings for the sh7753evb board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __SH7753EVB_H
+#define __SH7753EVB_H
+
+#undef DEBUG
+#define CONFIG_SH_32BIT		1
+#define CONFIG_CPU_SH7753	1
+#define CONFIG_SH7753EVB	1
+
+#define CONFIG_SYS_TEXT_BASE	0x5ff80000
+#define CONFIG_SYS_LDSCRIPT	"board/renesas/sh7753evb/u-boot.lds"
+
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_MD5SUM
+#define CONFIG_MD5
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS		"console=ttySC2,115200 root=/dev/nfs ip=dhcp"
+
+#define CONFIG_VERSION_VARIABLE
+#undef	CONFIG_SHOW_BOOT_PROGRESS
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+
+/* MEMORY */
+#define SH7753EVB_SDRAM_BASE		(0x40000000)
+#define SH7753EVB_SDRAM_SIZE		(512 * 1024 * 1024)
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		512
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE	1
+#define CONFIG_CONS_SCIF2	1
+#undef	CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef	CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef	CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+#define CONFIG_SYS_MEMTEST_START	(SH7753EVB_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
+					 480 * 1024 * 1024)
+#undef	CONFIG_SYS_ALT_MEMTEST
+#undef	CONFIG_SYS_MEMTEST_SCRATCH
+#undef	CONFIG_SYS_LOADS_BAUD_CHANGE
+
+#define CONFIG_SYS_SDRAM_BASE		(SH7753EVB_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE		(SH7753EVB_SDRAM_SIZE)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + \
+					 128 * 1024 * 1024)
+
+#define CONFIG_SYS_MONITOR_BASE		0x00000000
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
+
+/* FLASH */
+#define CONFIG_SYS_NO_FLASH
+
+/* Ether */
+#define CONFIG_SH_ETHER			1
+#define CONFIG_SH_ETHER_USE_PORT	0
+#define CONFIG_SH_ETHER_PHY_ADDR	18
+#define CONFIG_SH_ETHER_CACHE_WRITEBACK	1
+#define CONFIG_SH_ETHER_USE_GETHER	1
+#define CONFIG_PHYLIB
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
+#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RGMII
+#define CONFIG_PHY_VITESSE
+
+#define SH7753EVB_ETHERNET_MAC_BASE_SPI	0x00090000
+#define SH7753EVB_SPI_SECTOR_SIZE	(64 * 1024)
+#define SH7753EVB_ETHERNET_MAC_BASE	SH7753EVB_ETHERNET_MAC_BASE_SPI
+#define SH7753EVB_ETHERNET_MAC_SIZE	17
+#define SH7753EVB_ETHERNET_NUM_CH	2
+#define CONFIG_BOARD_LATE_INIT
+
+/* SPI */
+#define CONFIG_SH_SPI			1
+#define CONFIG_SH_SPI_BASE		0xfe002000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO	1
+#define CONFIG_SPI_FLASH_MACRONIX	1
+
+/* MMCIF */
+#define CONFIG_MMC			1
+#define CONFIG_GENERIC_MMC		1
+#define CONFIG_SH_MMCIF			1
+#define CONFIG_SH_MMCIF_ADDR		0xffcb0000
+#define CONFIG_SH_MMCIF_CLK		48000000
+
+/* ENV setting */
+#define CONFIG_ENV_IS_EMBEDDED
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SECT_SIZE	(64 * 1024)
+#define CONFIG_ENV_ADDR		(0x00080000)
+#define CONFIG_ENV_OFFSET	(CONFIG_ENV_ADDR)
+#define CONFIG_ENV_OVERWRITE	1
+#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_EXTRA_ENV_SETTINGS				\
+		"netboot=bootp; bootm\0"
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ	48000000
+#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_TMU_CLK_DIV	4
+#endif	/* __SH7753EVB_H */
diff --git a/include/configs/sh7757lcr.h b/include/configs/sh7757lcr.h
index ce1add2689..08bff1da3f 100644
--- a/include/configs/sh7757lcr.h
+++ b/include/configs/sh7757lcr.h
@@ -10,8 +10,6 @@
 #define __SH7757LCR_H
 
 #undef DEBUG
-#define CONFIG_SH		1
-#define CONFIG_SH4A		1
 #define CONFIG_SH_32BIT		1
 #define CONFIG_CPU_SH7757	1
 #define CONFIG_SH7757LCR	1
diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h
index a13778830a..2438318fca 100644
--- a/include/configs/sh7763rdp.h
+++ b/include/configs/sh7763rdp.h
@@ -10,8 +10,6 @@
 #ifndef __SH7763RDP_H
 #define __SH7763RDP_H
 
-#define CONFIG_SH		1
-#define CONFIG_SH4		1
 #define CONFIG_CPU_SH7763	1
 #define CONFIG_SH7763RDP	1
 #define __LITTLE_ENDIAN		1
diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h
index 4acbcab1b2..2723eaf2d3 100644
--- a/include/configs/sh7785lcr.h
+++ b/include/configs/sh7785lcr.h
@@ -10,8 +10,6 @@
 #define __SH7785LCR_H
 
 #undef DEBUG
-#define CONFIG_SH		1
-#define CONFIG_SH4A		1
 #define CONFIG_CPU_SH7785	1
 #define CONFIG_SH7785LCR	1
 
diff --git a/include/configs/shmin.h b/include/configs/shmin.h
index 5c990fc96d..f8155efbc9 100644
--- a/include/configs/shmin.h
+++ b/include/configs/shmin.h
@@ -9,8 +9,6 @@
 #ifndef __SHMIN_H
 #define __SHMIN_H
 
-#define CONFIG_SH		1
-#define CONFIG_SH3		1
 #define CONFIG_CPU_SH7706	1
 /* T-SH7706LAN */
 #define CONFIG_SHMIN		1
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index a87444e0b1..d4ae19f96c 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -101,8 +101,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 0e6b86412d..fd590e4e12 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -363,7 +363,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port*/
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
 #endif
 
 
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index ee1f1f3ed0..2a9c9a349c 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -341,7 +341,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*Note: change below for your network setting!!! */
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 63dd767047..d0cb68a0ed 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -376,7 +376,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*Note: change below for your network setting!!! */
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index d9b0ed07d6..54a5e3e260 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -303,7 +303,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 439fc47eb8..d44b5c036d 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -224,6 +224,7 @@
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_CONSOLE
 #define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SPL_NAND_WORKSPACE	0x8f07f000 /* below BSS */
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h
index 627836a7e8..58bcdc8f47 100644
--- a/include/configs/tcm-bf537.h
+++ b/include/configs/tcm-bf537.h
@@ -55,7 +55,7 @@
 #define CONFIG_EBIU_AMBCTL0_VAL	(B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
 #define CONFIG_EBIU_AMBCTL1_VAL	(B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
 
-#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN	(128 * 1024)
 
 
@@ -144,6 +144,7 @@
 #define FLASHBOOT_ENV_SETTINGS \
 	"flashboot=flread 20040000 1000000 300000;" \
 	"bootm 0x1000000\0"
+#define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024))
 
 
 /*
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 08771422ec..6cd15c25bd 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -99,6 +99,7 @@
 #define CONFIG_THOR_FUNCTION
 
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M
+#define DFU_DEFAULT_POLL_TIMEOUT 300
 #define CONFIG_DFU_FUNCTION
 #define CONFIG_DFU_MMC
 
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index 0615117773..b7804d2872 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -125,7 +125,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/twister.h b/include/configs/twister.h
index b6ca59c33c..f24dc136ca 100644
--- a/include/configs/twister.h
+++ b/include/configs/twister.h
@@ -50,4 +50,7 @@
 #define CONFIG_SYS_SPL_ARGS_ADDR	(PHYS_SDRAM_1 + 0x100)
 #define CONFIG_SPL_BOARD_INIT
 
+/* gpio 55 is used as SPL_OS_BOOT_KEY */
+#define CONFIG_OMAP3_GPIO_2
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
new file mode 100644
index 0000000000..ce5f384776
--- /dev/null
+++ b/include/configs/vexpress_aemv8a.h
@@ -0,0 +1,189 @@
+/*
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ *   configurations.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __VEXPRESS_AEMV8A_H
+#define __VEXPRESS_AEMV8A_H
+
+#define DEBUG
+
+#define CONFIG_REMAKE_ELF
+
+/*#define CONFIG_ARMV8_SWITCH_TO_EL1*/
+
+/*#define CONFIG_SYS_GENERIC_BOARD*/
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+/* Cache Definitions */
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_ICACHE_OFF
+
+#define CONFIG_IDENT_STRING		" vexpress_aemv8a"
+#define CONFIG_BOOTP_VCI_STRING		"U-boot.armv8.vexpress_aemv8a"
+
+/* Link Definitions */
+#define CONFIG_SYS_TEXT_BASE		0x80000000
+#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+
+/* Flat Device Tree Definitions */
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_DEFAULT_DEVICE_TREE	vexpress64
+
+/* SMP Spin Table Definitions */
+#define CPU_RELEASE_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fff0)
+
+/* CS register bases for the original memory map. */
+#define V2M_PA_CS0			0x00000000
+#define V2M_PA_CS1			0x14000000
+#define V2M_PA_CS2			0x18000000
+#define V2M_PA_CS3			0x1c000000
+#define V2M_PA_CS4			0x0c000000
+#define V2M_PA_CS5			0x10000000
+
+#define V2M_PERIPH_OFFSET(x)		(x << 16)
+#define V2M_SYSREGS			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
+#define V2M_SYSCTL			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
+#define V2M_SERIAL_BUS_PCI		(V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
+
+#define V2M_BASE			0x80000000
+
+/*
+ * Physical addresses, offset from V2M_PA_CS0-3
+ */
+#define V2M_NOR0			(V2M_PA_CS0)
+#define V2M_NOR1			(V2M_PA_CS4)
+#define V2M_SRAM			(V2M_PA_CS1)
+
+/* Common peripherals relative to CS7. */
+#define V2M_AACI			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
+#define V2M_MMCI			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
+#define V2M_KMI0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
+#define V2M_KMI1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
+
+#define V2M_UART0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
+#define V2M_UART1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
+#define V2M_UART2			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
+#define V2M_UART3			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
+
+#define V2M_WDT				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
+
+#define V2M_TIMER01			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
+#define V2M_TIMER23			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
+
+#define V2M_SERIAL_BUS_DVI		(V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
+#define V2M_RTC				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
+
+#define V2M_CF				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
+
+#define V2M_CLCD			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
+
+/* System register offsets. */
+#define V2M_SYS_CFGDATA			(V2M_SYSREGS + 0x0a0)
+#define V2M_SYS_CFGCTRL			(V2M_SYSREGS + 0x0a4)
+#define V2M_SYS_CFGSTAT			(V2M_SYSREGS + 0x0a8)
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY		(0x1800000)	/* 24MHz */
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE			(0x2C001000)
+#define GICC_BASE			(0x2C002000)
+
+#define CONFIG_SYS_MEMTEST_START	V2M_BASE
+#define CONFIG_SYS_MEMTEST_END		(V2M_BASE + 0x80000000)
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
+
+/* SMSC9115 Ethernet from SMSC9118 family */
+#define CONFIG_SMC9111			1
+#define CONFIG_SMC9111_BASE		(0x1a000000)
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK		24000000
+#define CONFIG_PL01x_PORTS		{(void *)CONFIG_SYS_SERIAL0, \
+					 (void *)CONFIG_SYS_SERIAL1}
+#define CONFIG_CONS_INDEX		0
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_SERIAL0		V2M_UART0
+#define CONFIG_SYS_SERIAL1		V2M_UART1
+
+/* Command line configuration */
+#define CONFIG_MENU
+/*#define CONFIG_MENU_SHOW*/
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PXE
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_PXE
+#define CONFIG_BOOTP_PXE_CLIENTARCH	0x100
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR		(V2M_BASE + 0x10000000)
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM_1			(V2M_BASE)	/* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE		0x80000000	/* 2048 MB */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+					"kernel_addr=0x200000\0"	\
+					"initrd_addr=0xa00000\0"	\
+					"initrd_size=0x2000000\0"	\
+					"fdt_addr=0x100000\0"		\
+					"fdt_high=0xa0000000\0"
+
+#define CONFIG_BOOTARGS			"console=ttyAMA0 root=/dev/ram0"
+#define CONFIG_BOOTCOMMAND		"bootm $kernel_addr " \
+					"$initrd_addr:$initrd_size $fdt_addr"
+#define CONFIG_BOOTDELAY		-1
+
+/* Do not preserve environment */
+#define CONFIG_ENV_IS_NOWHERE		1
+#define CONFIG_ENV_SIZE			0x1000
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PROMPT		"VExpress64# "
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING		1
+#define CONFIG_SYS_MAXARGS		64	/* max command args */
+
+#endif /* __VEXPRESS_AEMV8A_H */
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index 734d13f005..7ecbafe2e5 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -539,7 +539,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index c3ac612a8c..c6d47635b3 100644
--- a/include/configs/vpac270.h
+++ b/include/configs/vpac270.h
@@ -124,7 +124,6 @@
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
-#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
@@ -287,7 +286,7 @@
 /*
  * Memory settings
  */
-#define	CONFIG_SYS_MSC0_VAL	0x3ffc95fa
+#define	CONFIG_SYS_MSC0_VAL	0x3ffc95f9
 #define	CONFIG_SYS_MSC1_VAL	0x02ccf974
 #define	CONFIG_SYS_MSC2_VAL	0x00000000
 #ifdef	CONFIG_RAM_256M
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 431ed96e29..2999d1b0f5 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -84,7 +84,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200			/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	1			/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index 9d58738ce8..d8aeb3794e 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -283,7 +283,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
index 904f3b0fb1..e38fa89fda 100644
--- a/include/configs/zipitz2.h
+++ b/include/configs/zipitz2.h
@@ -117,7 +117,6 @@ unsigned char zipitz2_spi_read(void);
  */
 #ifdef	CONFIG_CMD_KGDB
 #define	CONFIG_KGDB_BAUDRATE		230400		/* speed to run kgdb serial port */
-#define	CONFIG_KGDB_SER_INDEX		2		/* which serial port to use */
 #endif
 
 /*
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
new file mode 100644
index 0000000000..e7a8e9fb11
--- /dev/null
+++ b/include/configs/zynq-common.h
@@ -0,0 +1,238 @@
+/*
+ * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Common configuration options for all Zynq boards.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_COMMON_H
+#define __CONFIG_ZYNQ_COMMON_H
+
+/* High Level configuration Options */
+#define CONFIG_ARMV7
+#define CONFIG_ZYNQ
+
+/* CPU clock */
+#ifndef CONFIG_CPU_FREQ_HZ
+# define CONFIG_CPU_FREQ_HZ	800000000
+#endif
+
+/* Cache options */
+#define CONFIG_CMD_CACHE
+#define CONFIG_SYS_CACHELINE_SIZE	32
+
+#define CONFIG_SYS_L2CACHE_OFF
+#ifndef CONFIG_SYS_L2CACHE_OFF
+# define CONFIG_SYS_L2_PL310
+# define CONFIG_SYS_PL310_BASE		0xf8f02000
+#endif
+
+/* Serial drivers */
+#define CONFIG_BAUDRATE		115200
+/* The following table includes the supported baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/* Zynq Serial driver */
+#ifdef CONFIG_ZYNQ_SERIAL_UART0
+# define CONFIG_ZYNQ_SERIAL_BASEADDR0	0xE0000000
+# define CONFIG_ZYNQ_SERIAL_BAUDRATE0	CONFIG_BAUDRATE
+# define CONFIG_ZYNQ_SERIAL_CLOCK0	50000000
+#endif
+
+#ifdef CONFIG_ZYNQ_SERIAL_UART1
+# define CONFIG_ZYNQ_SERIAL_BASEADDR1	0xE0001000
+# define CONFIG_ZYNQ_SERIAL_BAUDRATE1	CONFIG_BAUDRATE
+# define CONFIG_ZYNQ_SERIAL_CLOCK1	50000000
+#endif
+
+#if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1)
+# define CONFIG_ZYNQ_SERIAL
+#endif
+
+/* DCC driver */
+#if defined(CONFIG_ZYNQ_DCC)
+# define CONFIG_ARM_DCC
+# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
+#endif
+
+/* Ethernet driver */
+#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
+# define CONFIG_NET_MULTI
+# define CONFIG_ZYNQ_GEM
+# define CONFIG_MII
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_PHYLIB
+# define CONFIG_PHY_MARVELL
+#endif
+
+/* SPI */
+#ifdef CONFIG_ZYNQ_SPI
+# define CONFIG_SPI_FLASH
+# define CONFIG_SPI_FLASH_SST
+# define CONFIG_CMD_SF
+#endif
+
+/* NOR */
+#ifndef CONFIG_SYS_NO_FLASH
+# define CONFIG_SYS_FLASH_BASE		0xE2000000
+# define CONFIG_SYS_FLASH_SIZE		(16 * 1024 * 1024)
+# define CONFIG_SYS_MAX_FLASH_BANKS	1
+# define CONFIG_SYS_MAX_FLASH_SECT	512
+# define CONFIG_SYS_FLASH_ERASE_TOUT	1000
+# define CONFIG_SYS_FLASH_WRITE_TOUT	5000
+# define CONFIG_FLASH_SHOW_PROGRESS	10
+# define CONFIG_SYS_FLASH_CFI
+# undef CONFIG_SYS_FLASH_EMPTY_INFO
+# define CONFIG_FLASH_CFI_DRIVER
+# undef CONFIG_SYS_FLASH_PROTECTION
+# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#endif
+
+/* MMC */
+#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
+# define CONFIG_MMC
+# define CONFIG_GENERIC_MMC
+# define CONFIG_SDHCI
+# define CONFIG_ZYNQ_SDHCI
+# define CONFIG_CMD_MMC
+# define CONFIG_CMD_FAT
+# define CONFIG_SUPPORT_VFAT
+# define CONFIG_CMD_EXT2
+# define CONFIG_DOS_PARTITION
+#endif
+
+/* I2C */
+#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
+# define CONFIG_CMD_I2C
+# define CONFIG_SYS_I2C
+# define CONFIG_SYS_I2C_ZYNQ
+# define CONFIG_SYS_I2C_ZYNQ_SPEED		100000
+# define CONFIG_SYS_I2C_ZYNQ_SLAVE		1
+#endif
+
+/* EEPROM */
+#ifdef CONFIG_ZYNQ_EEPROM
+# define CONFIG_CMD_EEPROM
+# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+# define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
+# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+# define CONFIG_SYS_EEPROM_SIZE			1024 /* Bytes */
+#endif
+
+#define CONFIG_BOOTP_SERVERIP
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_MAY_FAIL
+
+/* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE			(128 << 10)
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Environment */
+#ifndef CONFIG_ENV_IS_NOWHERE
+# ifndef CONFIG_SYS_NO_FLASH
+#  define CONFIG_ENV_IS_IN_FLASH
+# elif defined(CONFIG_SYS_NO_FLASH)
+#  define CONFIG_ENV_IS_NOWHERE
+# endif
+
+# define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
+# define CONFIG_ENV_OFFSET		0xE0000
+# define CONFIG_CMD_SAVEENV
+#endif
+
+/* Default environment */
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	"fit_image=fit.itb\0"		\
+	"load_addr=0x2000000\0"		\
+	"fit_size=0x800000\0"		\
+	"flash_off=0x100000\0"		\
+	"nor_flash_off=0xE2100000\0"	\
+	"fdt_high=0x20000000\0"		\
+	"initrd_high=0x20000000\0"	\
+	"norboot=echo Copying FIT from NOR flash to RAM... && " \
+		"cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
+		"bootm ${load_addr}\0" \
+	"sdboot=echo Copying FIT from SD to RAM... && " \
+		"fatload mmc 0 ${load_addr} ${fit_image} && " \
+		"bootm ${load_addr}\0" \
+	"jtagboot=echo TFTPing FIT to RAM... && " \
+		"tftp ${load_addr} ${fit_image} && " \
+		"bootm ${load_addr}\0"
+#define CONFIG_BOOTCOMMAND		"run $modeboot"
+#define CONFIG_BOOTDELAY		3 /* -1 to Disable autoboot */
+#define CONFIG_SYS_LOAD_ADDR		0 /* default? */
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_PROMPT		"zynq-uboot> "
+#define CONFIG_SYS_HUSH_PARSER
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_MAXARGS		15 /* max number of command args */
+#define CONFIG_SYS_CBSIZE		256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Physical Memory map */
+#define CONFIG_SYS_TEXT_BASE		0x4000000
+
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE		0
+
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x1000)
+
+#define CONFIG_SYS_MALLOC_LEN		0x400000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_MALLOC_LEN
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					CONFIG_SYS_INIT_RAM_SIZE - \
+					GENERATED_GBL_DATA_SIZE)
+
+/* Enable the PL to be downloaded */
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_ZYNQPL
+#define CONFIG_CMD_FPGA
+
+/* Open Firmware flat tree */
+#define CONFIG_OF_LIBFDT
+
+/* FIT support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
+
+/* FDT support */
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+/* RSA support */
+#define CONFIG_FIT_SIGNATURE
+#define CONFIG_RSA
+
+/* Boot FreeBSD/vxWorks from an ELF image */
+#if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
+# define CONFIG_API
+# define CONFIG_CMD_ELF
+# define CONFIG_SYS_MMC_MAX_DEVICE	1
+#endif
+
+/* Commands */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+
+#endif /* __CONFIG_ZYNQ_COMMON_H */
diff --git a/include/configs/zynq.h b/include/configs/zynq.h
deleted file mode 100644
index 82ec826f73..0000000000
--- a/include/configs/zynq.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_ZYNQ_H
-#define __CONFIG_ZYNQ_H
-
-#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */
-#define CONFIG_ZYNQ
-
-/* CPU clock */
-#define CONFIG_CPU_FREQ_HZ	800000000
-
-/* Ram */
-#define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_TEXT_BASE		0
-#define CONFIG_SYS_SDRAM_BASE		0
-#define CONFIG_SYS_SDRAM_SIZE		0x40000000
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x1000)
-
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
-#define CONFIG_BAUDRATE		115200
-
-/* XPSS Serial driver */
-#define CONFIG_ZYNQ_SERIAL
-#define CONFIG_ZYNQ_SERIAL_BASEADDR0	0xE0001000
-#define CONFIG_ZYNQ_SERIAL_BAUDRATE0	CONFIG_BAUDRATE
-#define CONFIG_ZYNQ_SERIAL_CLOCK0	50000000
-
-/* Ethernet driver */
-#define CONFIG_NET_MULTI
-#define CONFIG_ZYNQ_GEM
-#define CONFIG_ZYNQ_GEM0
-#define CONFIG_ZYNQ_GEM_PHY_ADDR0	7
-
-#define CONFIG_ZYNQ_SDHCI
-#define CONFIG_ZYNQ_SDHCI0
-
-/* MMC */
-#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
-# define CONFIG_MMC
-# define CONFIG_GENERIC_MMC
-# define CONFIG_SDHCI
-# define CONFIG_ZYNQ_SDHCI
-# define CONFIG_CMD_MMC
-# define CONFIG_CMD_FAT
-# define CONFIG_SUPPORT_VFAT
-# define CONFIG_CMD_EXT2
-# define CONFIG_DOS_PARTITION
-#endif
-
-#define CONFIG_ZYNQ_I2C0
-
-/* I2C */
-#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
-# define CONFIG_CMD_I2C
-# define CONFIG_SYS_I2C
-# define CONFIG_SYS_I2C_ZYNQ
-# define CONFIG_SYS_I2C_ZYNQ_SPEED		100000
-# define CONFIG_SYS_I2C_ZYNQ_SLAVE		1
-#endif
-
-#if defined(CONFIG_ZYNQ_DCC)
-# define CONFIG_ARM_DCC
-# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
-#endif
-
-#define CONFIG_ZYNQ_SPI
-
-/* SPI */
-#ifdef CONFIG_ZYNQ_SPI
-# define CONFIG_SPI_FLASH
-# define CONFIG_SPI_FLASH_SST
-# define CONFIG_CMD_SF
-#endif
-
-/* Enable the PL to be downloaded */
-#define CONFIG_FPGA
-#define CONFIG_FPGA_XILINX
-#define CONFIG_FPGA_ZYNQPL
-#define CONFIG_CMD_FPGA
-
-#define CONFIG_BOOTP_SERVERIP
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_MAY_FAIL
-
-/* MII and Phylib */
-#define CONFIG_MII
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MARVELL
-
-/* Environment */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE 0x10000
-
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_SYS_MALLOC_LEN		0x400000
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-						CONFIG_SYS_INIT_RAM_SIZE - \
-						GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_PROMPT	"U-Boot> "
-#define CONFIG_SYS_CBSIZE	256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_SYS_LOAD_ADDR	0
-#define CONFIG_SYS_MAXARGS	15 /* max number of command args */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-
-/* OF */
-#define CONFIG_FIT
-#define CONFIG_OF_LIBFDT
-
-/* Commands */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
-#endif /* __CONFIG_ZYNQ_H */
diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h
new file mode 100644
index 0000000000..b0328a2cc1
--- /dev/null
+++ b/include/configs/zynq_microzed.h
@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration for Micro Zynq Evaluation and Development Board - MicroZedBoard
+ * See zynq-common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_MICROZED_H
+#define __CONFIG_ZYNQ_MICROZED_H
+
+#define CONFIG_SYS_SDRAM_SIZE		(1024 * 1024 * 1024)
+
+#define CONFIG_ZYNQ_SERIAL_UART1
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0	0
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_DEFAULT_DEVICE_TREE	zynq-microzed
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_MICROZED_H */
diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h
new file mode 100644
index 0000000000..673660e659
--- /dev/null
+++ b/include/configs/zynq_zc70x.h
@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration settings for the Xilinx Zynq ZC702 and ZC706 boards
+ * See zynq_common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_ZC70X_H
+#define __CONFIG_ZYNQ_ZC70X_H
+
+#define CONFIG_SYS_SDRAM_SIZE		(1024 * 1024 * 1024)
+
+#define CONFIG_ZYNQ_SERIAL_UART1
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0	7
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_I2C0
+#define CONFIG_ZYNQ_EEPROM
+#define CONFIG_ZYNQ_BOOT_FREEBSD
+#define CONFIG_DEFAULT_DEVICE_TREE	zynq-zc702
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_ZC70X_H */
diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h
new file mode 100644
index 0000000000..8aa96e7121
--- /dev/null
+++ b/include/configs/zynq_zc770.h
@@ -0,0 +1,42 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration settings for the Xilinx Zynq ZC770 board.
+ * See zynq-common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_ZC770_H
+#define __CONFIG_ZYNQ_ZC770_H
+
+#define CONFIG_SYS_SDRAM_SIZE		(1024 * 1024 * 1024)
+
+#define CONFIG_SYS_NO_FLASH
+
+#if defined(CONFIG_ZC770_XM010)
+# define CONFIG_ZYNQ_SERIAL_UART1
+# define CONFIG_ZYNQ_GEM0
+# define CONFIG_ZYNQ_GEM_PHY_ADDR0	7
+# define CONFIG_ZYNQ_SDHCI0
+# define CONFIG_ZYNQ_SPI
+# define CONFIG_DEFAULT_DEVICE_TREE	zynq-zc770-xm010
+
+#elif defined(CONFIG_ZC770_XM012)
+# define CONFIG_ZYNQ_SERIAL_UART1
+# undef CONFIG_SYS_NO_FLASH
+# define CONFIG_DEFAULT_DEVICE_TREE	zynq-zc770-xm012
+
+#elif defined(CONFIG_ZC770_XM013)
+# define CONFIG_ZYNQ_SERIAL_UART0
+# define CONFIG_ZYNQ_GEM1
+# define CONFIG_ZYNQ_GEM_PHY_ADDR1	7
+# define CONFIG_DEFAULT_DEVICE_TREE	zynq-zc770-xm013
+
+#else
+# define CONFIG_ZYNQ_SERIAL_UART0
+#endif
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_ZC770_H */
diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h
new file mode 100644
index 0000000000..412dede533
--- /dev/null
+++ b/include/configs/zynq_zed.h
@@ -0,0 +1,27 @@
+/*
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Configuration for Zynq Evaluation and Development Board - ZedBoard
+ * See zynq_common.h for Zynq common configs
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_ZED_H
+#define __CONFIG_ZYNQ_ZED_H
+
+#define CONFIG_SYS_SDRAM_SIZE		(512 * 1024 * 1024)
+
+#define CONFIG_ZYNQ_SERIAL_UART1
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0	0
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_BOOT_FREEBSD
+#define CONFIG_DEFAULT_DEVICE_TREE	zynq-zed
+
+#include <configs/zynq-common.h>
+
+#endif /* __CONFIG_ZYNQ_ZED_H */
author	Stefano Babic <sbabic@denx.de>	2014-01-26 12:11:54 +0100
committer	Stefano Babic <sbabic@denx.de>	2014-01-26 12:11:54 +0100
commit	707acd01ded3c60a4e277f7c5432d397897b4dfd (patch)
tree	5730e1e1f0bac6c1aeddc261cb412fc3d5f220fd /include/configs
parent	be2a3bb39adf1fdd274fc427e30ef62eb86441a1 (diff)
parent	c71b4dd2da0dcddabd7c29e6c3dc8a495d4bd928 (diff)