Cleanup

3 files changed, 124 insertions, 137 deletions

diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 61a1c271ab..d8c609b810 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -13,7 +13,7 @@
  * Ported to PQ2FADS-ZU and PQ2FADS-VR boards.
  * Ported to MPC8272ADS board.
  *
- * Copyright (c) 2005 MontaVista Software, Inc.   
+ * Copyright (c) 2005 MontaVista Software, Inc.
  * Vitaly Bordug <vbordug@ru.mvista.com>
  * Added support for PCI bridge on MPC8272ADS
  *
@@ -55,7 +55,6 @@
 #   define CFG_LOWBOOT		1
 #endif
 
-
 /* ADS flavours */
 #define CFG_8260ADS		1	/* MPC8260ADS */
 #define CFG_8266ADS		2	/* MPC8266ADS */
@@ -185,7 +184,6 @@
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
-
 #ifndef CONFIG_SDRAM_PBI
 #define CONFIG_SDRAM_PBI	0 /* By default, use bank-based interleaving */
 #endif
@@ -334,7 +332,6 @@
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-
 #ifdef CFG_LOWBOOT
 /* PQ2FADS flash HRCW = 0x0EB4B645 */
 #define CFG_HRCW_MASTER (   ( HRCW_BPS11 | HRCW_CIP )			    |\
@@ -386,13 +383,11 @@
 #  define CFG_ENV_SIZE		0x200
 #endif /* CFG_RAMBOOT */
 
-
 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
-
 #define CFG_HID0_INIT		0
 #define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE )
 
@@ -461,8 +456,6 @@
  * these windows.
  */
 
-
-
 /*
  * Master window that allows the CPU to access PCI Memory (prefetch).
  * This window will be setup with the second set of Outbound ATU registers
@@ -504,7 +497,7 @@
 #define CFG_PCI_MSTR0_LOCAL		CFG_PCI_MSTR_IO_LOCAL		/* Local base */
 #define CFG_PCIMSK0_MASK		~(CFG_PCI_MSTR_IO_SIZE - 1U)	/* Size of window */
 /* PCIBR1 - prefetch and non-prefetch regions joined together */
-#define CFG_PCI_MSTR1_LOCAL		CFG_PCI_MSTR_MEM_LOCAL	
+#define CFG_PCI_MSTR1_LOCAL		CFG_PCI_MSTR_MEM_LOCAL
 #define CFG_PCIMSK1_MASK		~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U)
 
 #endif /* CONFIG_ADSTYPE == CONFIG_8272ADS*/
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index 25f4682e65..ad92f3209b 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -38,15 +38,15 @@
 #define CFG_MEMTEST_END		0x10000000
 #define CFG_HZ			1000
 #define CFG_HZ_CLOCK		24000000	/* Timer 1 is clocked at 24Mhz */
-#define CFG_TIMERBASE		0x13000100	/* Timer1                      */
+#define CFG_TIMERBASE		0x13000100	/* Timer1		       */
 
 #define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_MISC_INIT_R	1	/* call misc_init_r during start up */
 
 #undef CONFIG_INIT_CRITICAL
-#define CONFIG_CM_INIT          1
-#define CONFIG_CM_REMAP         1
+#define CONFIG_CM_INIT		1
+#define CONFIG_CM_REMAP		1
 #undef CONFIG_CM_SPD_DETECT
 
 /*
@@ -60,36 +60,36 @@
  */
 #define CFG_PL010_SERIAL
 #define CONFIG_CONS_INDEX	0
-#define CONFIG_BAUDRATE         38400
+#define CONFIG_BAUDRATE		38400
 #define CONFIG_PL01x_PORTS	{ (void *) (CFG_SERIAL0), (void *) (CFG_SERIAL1) }
-#define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 #define CFG_SERIAL0		0x16000000
 #define CFG_SERIAL1		0x17000000
 
 /*#define CONFIG_COMMANDS	(CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_PCI) */
 /*#define CONFIG_NET_MULTI */
-/*#define CONFIG_BOOTP_MASK       CONFIG_BOOTP_DEFAULT */
+/*#define CONFIG_BOOTP_MASK	  CONFIG_BOOTP_DEFAULT */
 
-#define CONFIG_COMMANDS	(CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY)
+#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY)
 
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
-#define CONFIG_BOOTDELAY        2
-#define CONFIG_BOOTARGS         "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty"
-#define CONFIG_BOOTCOMMAND      ""
+#define CONFIG_BOOTDELAY	2
+#define CONFIG_BOOTARGS		"root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty"
+#define CONFIG_BOOTCOMMAND	""
 
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP	/* undef to save memory     */
+#define CFG_LONGHELP	/* undef to save memory	    */
 #define CFG_PROMPT	"Integrator-AP # "	/* Monitor Command Prompt   */
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size  */
 /* Print Buffer Size */
 #define CFG_PBSIZE	(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS	16		/* max number of command args   */
-#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size    */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
 
 #undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 #define CFG_LOAD_ADDR	0x7fc0	/* default load address */
@@ -108,11 +108,11 @@
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS    1	/* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1            0x00000000	/* SDRAM Bank #1 */
+#define CONFIG_NR_DRAM_BANKS	1	/* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1		0x00000000	/* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	0x02000000	/* 32 MB */
 
-#define CFG_FLASH_BASE          0x24000000
+#define CFG_FLASH_BASE		0x24000000
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
@@ -123,8 +123,8 @@
 /* timeout values are in ticks */
 #define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ)	/* Timeout for Flash Erase */
 #define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ)	/* Timeout for Flash Write */
-#define CFG_MAX_FLASH_SECT 	128
-#define CFG_ENV_SIZE 		32768
+#define CFG_MAX_FLASH_SECT	128
+#define CFG_ENV_SIZE		32768
 
 #define PHYS_FLASH_1		(CFG_FLASH_BASE)
 
@@ -134,35 +134,35 @@
 
 /*#define CONFIG_PCI			/--* include pci support	*/
 #undef CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup  */
+#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
 #define DEBUG
 
 #define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER	8       /* use 8 rx buffer on eepro100  */
+#define CFG_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
 
 
 #define INTEGRATOR_BOOT_ROM_BASE	0x20000000
-#define INTEGRATOR_HDR0_SDRAM_BASE      0x80000000
+#define INTEGRATOR_HDR0_SDRAM_BASE	0x80000000
 
 /* PCI Base area */
 #define INTEGRATOR_PCI_BASE		0x40000000
 #define INTEGRATOR_PCI_SIZE		0x3FFFFFFF
 
 /* memory map as seen by the CPU on the local bus */
-#define CPU_PCI_IO_ADRS		0x60000000 	/* PCI I/O space base */
+#define CPU_PCI_IO_ADRS		0x60000000	/* PCI I/O space base */
 #define CPU_PCI_IO_SIZE		0x10000
 
 #define CPU_PCI_CNFG_ADRS	0x61000000	/* PCI config space */
 #define CPU_PCI_CNFG_SIZE	0x1000000
 
-#define PCI_MEM_BASE            0x40000000   /* 512M to xxx */
+#define PCI_MEM_BASE		0x40000000   /* 512M to xxx */
 /*  unused 256M from A0000000-AFFFFFFF might be used for I2O ??? */
-#define INTEGRATOR_PCI_IO_BASE  0x60000000   /* 16M to xxx */
+#define INTEGRATOR_PCI_IO_BASE	0x60000000   /* 16M to xxx */
 /*  unused (128-16)M from B1000000-B7FFFFFF */
-#define PCI_CONFIG_BASE         0x61000000   /* 16M to xxx */
+#define PCI_CONFIG_BASE		0x61000000   /* 16M to xxx */
 /*  unused ((128-16)M - 64K) from XXX */
 
-#define PCI_V3_BASE             0x62000000
+#define PCI_V3_BASE		0x62000000
 
 /* V3 PCI bridge controller */
 #define V3_BASE			0x62000000    /* V360EPC registers */
@@ -171,97 +171,97 @@
 #define PCI_ENET0_MEMADDR	(PCI_MEM_BASE)
 
 
-#define V3_PCI_VENDOR           0x00000000
-#define V3_PCI_DEVICE           0x00000002
-#define V3_PCI_CMD              0x00000004
-#define V3_PCI_STAT             0x00000006
-#define V3_PCI_CC_REV           0x00000008
-#define V3_PCI_HDR_CF           0x0000000C
-#define V3_PCI_IO_BASE          0x00000010
-#define V3_PCI_BASE0            0x00000014
-#define V3_PCI_BASE1            0x00000018
-#define V3_PCI_SUB_VENDOR       0x0000002C
-#define V3_PCI_SUB_ID           0x0000002E
-#define V3_PCI_ROM              0x00000030
-#define V3_PCI_BPARAM           0x0000003C
-#define V3_PCI_MAP0             0x00000040
-#define V3_PCI_MAP1             0x00000044
-#define V3_PCI_INT_STAT         0x00000048
-#define V3_PCI_INT_CFG          0x0000004C
-#define V3_LB_BASE0             0x00000054
-#define V3_LB_BASE1             0x00000058
-#define V3_LB_MAP0              0x0000005E
-#define V3_LB_MAP1              0x00000062
-#define V3_LB_BASE2             0x00000064
-#define V3_LB_MAP2              0x00000066
-#define V3_LB_SIZE              0x00000068
-#define V3_LB_IO_BASE           0x0000006E
-#define V3_FIFO_CFG             0x00000070
-#define V3_FIFO_PRIORITY        0x00000072
-#define V3_FIFO_STAT            0x00000074
-#define V3_LB_ISTAT             0x00000076
-#define V3_LB_IMASK             0x00000077
-#define V3_SYSTEM               0x00000078
-#define V3_LB_CFG               0x0000007A
-#define V3_PCI_CFG              0x0000007C
-#define V3_DMA_PCI_ADR0         0x00000080
-#define V3_DMA_PCI_ADR1         0x00000090
-#define V3_DMA_LOCAL_ADR0       0x00000084
-#define V3_DMA_LOCAL_ADR1       0x00000094
-#define V3_DMA_LENGTH0          0x00000088
-#define V3_DMA_LENGTH1          0x00000098
-#define V3_DMA_CSR0             0x0000008B
-#define V3_DMA_CSR1             0x0000009B
-#define V3_DMA_CTLB_ADR0        0x0000008C
-#define V3_DMA_CTLB_ADR1        0x0000009C
-#define V3_DMA_DELAY            0x000000E0
-#define V3_MAIL_DATA            0x000000C0
-#define V3_PCI_MAIL_IEWR        0x000000D0
-#define V3_PCI_MAIL_IERD        0x000000D2
-#define V3_LB_MAIL_IEWR         0x000000D4
-#define V3_LB_MAIL_IERD         0x000000D6
-#define V3_MAIL_WR_STAT         0x000000D8
-#define V3_MAIL_RD_STAT         0x000000DA
-#define V3_QBA_MAP              0x000000DC
+#define V3_PCI_VENDOR		0x00000000
+#define V3_PCI_DEVICE		0x00000002
+#define V3_PCI_CMD		0x00000004
+#define V3_PCI_STAT		0x00000006
+#define V3_PCI_CC_REV		0x00000008
+#define V3_PCI_HDR_CF		0x0000000C
+#define V3_PCI_IO_BASE		0x00000010
+#define V3_PCI_BASE0		0x00000014
+#define V3_PCI_BASE1		0x00000018
+#define V3_PCI_SUB_VENDOR	0x0000002C
+#define V3_PCI_SUB_ID		0x0000002E
+#define V3_PCI_ROM		0x00000030
+#define V3_PCI_BPARAM		0x0000003C
+#define V3_PCI_MAP0		0x00000040
+#define V3_PCI_MAP1		0x00000044
+#define V3_PCI_INT_STAT		0x00000048
+#define V3_PCI_INT_CFG		0x0000004C
+#define V3_LB_BASE0		0x00000054
+#define V3_LB_BASE1		0x00000058
+#define V3_LB_MAP0		0x0000005E
+#define V3_LB_MAP1		0x00000062
+#define V3_LB_BASE2		0x00000064
+#define V3_LB_MAP2		0x00000066
+#define V3_LB_SIZE		0x00000068
+#define V3_LB_IO_BASE		0x0000006E
+#define V3_FIFO_CFG		0x00000070
+#define V3_FIFO_PRIORITY	0x00000072
+#define V3_FIFO_STAT		0x00000074
+#define V3_LB_ISTAT		0x00000076
+#define V3_LB_IMASK		0x00000077
+#define V3_SYSTEM		0x00000078
+#define V3_LB_CFG		0x0000007A
+#define V3_PCI_CFG		0x0000007C
+#define V3_DMA_PCI_ADR0		0x00000080
+#define V3_DMA_PCI_ADR1		0x00000090
+#define V3_DMA_LOCAL_ADR0	0x00000084
+#define V3_DMA_LOCAL_ADR1	0x00000094
+#define V3_DMA_LENGTH0		0x00000088
+#define V3_DMA_LENGTH1		0x00000098
+#define V3_DMA_CSR0		0x0000008B
+#define V3_DMA_CSR1		0x0000009B
+#define V3_DMA_CTLB_ADR0	0x0000008C
+#define V3_DMA_CTLB_ADR1	0x0000009C
+#define V3_DMA_DELAY		0x000000E0
+#define V3_MAIL_DATA		0x000000C0
+#define V3_PCI_MAIL_IEWR	0x000000D0
+#define V3_PCI_MAIL_IERD	0x000000D2
+#define V3_LB_MAIL_IEWR		0x000000D4
+#define V3_LB_MAIL_IERD		0x000000D6
+#define V3_MAIL_WR_STAT		0x000000D8
+#define V3_MAIL_RD_STAT		0x000000DA
+#define V3_QBA_MAP		0x000000DC
 
 /* SYSTEM register bits */
-#define V3_SYSTEM_M_RST_OUT             (1 << 15)
-#define V3_SYSTEM_M_LOCK                (1 << 14)
+#define V3_SYSTEM_M_RST_OUT		(1 << 15)
+#define V3_SYSTEM_M_LOCK		(1 << 14)
 
 /*  PCI_CFG bits */
-#define V3_PCI_CFG_M_RETRY_EN           (1 << 10)
-#define V3_PCI_CFG_M_AD_LOW1            (1 << 9)
-#define V3_PCI_CFG_M_AD_LOW0            (1 << 8)
+#define V3_PCI_CFG_M_RETRY_EN		(1 << 10)
+#define V3_PCI_CFG_M_AD_LOW1		(1 << 9)
+#define V3_PCI_CFG_M_AD_LOW0		(1 << 8)
 
 /* PCI MAP register bits (PCI -> Local bus) */
-#define V3_PCI_MAP_M_MAP_ADR            0xFFF00000
-#define V3_PCI_MAP_M_RD_POST_INH        (1 << 15)
-#define V3_PCI_MAP_M_ROM_SIZE           (1 << 11 | 1 << 10)
-#define V3_PCI_MAP_M_SWAP               (1 << 9 | 1 << 8)
-#define V3_PCI_MAP_M_ADR_SIZE           0x000000F0
-#define V3_PCI_MAP_M_REG_EN             (1 << 1)
-#define V3_PCI_MAP_M_ENABLE             (1 << 0)
+#define V3_PCI_MAP_M_MAP_ADR		0xFFF00000
+#define V3_PCI_MAP_M_RD_POST_INH	(1 << 15)
+#define V3_PCI_MAP_M_ROM_SIZE		(1 << 11 | 1 << 10)
+#define V3_PCI_MAP_M_SWAP		(1 << 9 | 1 << 8)
+#define V3_PCI_MAP_M_ADR_SIZE		0x000000F0
+#define V3_PCI_MAP_M_REG_EN		(1 << 1)
+#define V3_PCI_MAP_M_ENABLE		(1 << 0)
 
 /* 9 => 512M window size */
-#define V3_PCI_MAP_M_ADR_SIZE_512M      0x00000090
+#define V3_PCI_MAP_M_ADR_SIZE_512M	0x00000090
 
 /* A => 1024M window size */
-#define V3_PCI_MAP_M_ADR_SIZE_1024M     0x000000A0
+#define V3_PCI_MAP_M_ADR_SIZE_1024M	0x000000A0
 
 /* LB_BASE register bits (Local bus -> PCI) */
-#define V3_LB_BASE_M_MAP_ADR            0xFFF00000
-#define V3_LB_BASE_M_SWAP               (1 << 8 | 1 << 9)
-#define V3_LB_BASE_M_ADR_SIZE           0x000000F0
-#define V3_LB_BASE_M_PREFETCH           (1 << 3)
-#define V3_LB_BASE_M_ENABLE             (1 << 0)
+#define V3_LB_BASE_M_MAP_ADR		0xFFF00000
+#define V3_LB_BASE_M_SWAP		(1 << 8 | 1 << 9)
+#define V3_LB_BASE_M_ADR_SIZE		0x000000F0
+#define V3_LB_BASE_M_PREFETCH		(1 << 3)
+#define V3_LB_BASE_M_ENABLE		(1 << 0)
 
 /* PCI COMMAND REGISTER bits */
-#define V3_COMMAND_M_FBB_EN             (1 << 9)
-#define V3_COMMAND_M_SERR_EN            (1 << 8)
-#define V3_COMMAND_M_PAR_EN             (1 << 6)
-#define V3_COMMAND_M_MASTER_EN          (1 << 2)
-#define V3_COMMAND_M_MEM_EN             (1 << 1)
-#define V3_COMMAND_M_IO_EN              (1 << 0)
+#define V3_COMMAND_M_FBB_EN		(1 << 9)
+#define V3_COMMAND_M_SERR_EN		(1 << 8)
+#define V3_COMMAND_M_PAR_EN		(1 << 6)
+#define V3_COMMAND_M_MASTER_EN		(1 << 2)
+#define V3_COMMAND_M_MEM_EN		(1 << 1)
+#define V3_COMMAND_M_IO_EN		(1 << 0)
 
 #define INTEGRATOR_SC_BASE		0x11000000
 #define INTEGRATOR_SC_PCIENABLE_OFFSET	0x18
@@ -280,38 +280,37 @@
 
 /* CM registers common to all integrator/CP CMs */
 #define OS_CTRL			0x0000000C
-#define CMMASK_REMAP		0x00000005	/* Set remap & led           */
+#define CMMASK_REMAP		0x00000005	/* Set remap & led	     */
 #define CMMASK_RESET		0x00000008
 #define OS_LOCK			0x00000014
-#define CMVAL_LOCK		0x0000A000	/* Locking value             */
-#define CMMASK_LOCK		0x0000005F	/* Locking value             */
+#define CMVAL_LOCK		0x0000A000	/* Locking value	     */
+#define CMMASK_LOCK		0x0000005F	/* Locking value	     */
 #define CMVAL_UNLOCK		0x00000000	/* Any value != CM_LOCKVAL   */
 #define OS_SDRAM		0x00000020
 #define OS_INIT			0x00000024
 #define CMMASK_MAP_SIMPLE	0xFFFDFFFF	/* simple mapping */
 #define CMMASK_TCRAM_DISABLE	0xFFFEFFFF	/* TCRAM disabled */
-#define CMMASK_LOWVEC         0x00000004      /* vectors @ 0x00000000 */
+#define CMMASK_LOWVEC	      0x00000004      /* vectors @ 0x00000000 */
 
 #ifdef CONFIG_CM_SPD_DETECT
 #define OS_SPD		0x00000100	/* The SDRAM SPD data is copied here */
 #endif
 
 #if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
-#define CMMASK_INIT_102       0x00000300      /* see CM102xx ref manual
-                                               * - PLL test clock bypassed
-                                               * - bus clock ratio 2
-                                               * - little endian
-                                               * - vectors at zero
-                                               */
+#define CMMASK_INIT_102	      0x00000300      /* see CM102xx ref manual
+					       * - PLL test clock bypassed
+					       * - bus clock ratio 2
+					       * - little endian
+					       * - vectors at zero
+					       */
 #endif /* CM1022xx */
 
-#define CMMASK_LE             0x00000008      /* little endian */
+#define CMMASK_LE	      0x00000008      /* little endian */
 #define CMMASK_CMxx6_COMMON   0x00000100      /* Common value for CMxx6
-                                               * - divisor/ratio b00000001
-                                               *                 bx
-                                               * - HCLKDIV       b000
-                                               *                 bxx
-                                               * - PLL BYPASS    b00
-                                               */
-#endif							/* __CONFIG_H */
-
+					       * - divisor/ratio b00000001
+					       *		 bx
+					       * - HCLKDIV	 b000
+					       *		 bxx
+					       * - PLL BYPASS	 b00
+					       */
+#endif	/* __CONFIG_H */
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 5674e20fc8..12252ac129 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -40,7 +40,7 @@
 
 /* Clock config to target*/
 #define PRCM_CONFIG_II	1
-//#define PRCM_CONFIG_III		1
+/* #define PRCM_CONFIG_III		1 */
 
 #include <asm/arch/omap2420.h>        /* get chip and board defs */
 
@@ -157,7 +157,6 @@
 #define NAND_WP_OFF()  do {*(volatile u32 *)(0x6800A050) |= 0x00000010;} while(0)
 #define NAND_WP_ON()  do {*(volatile u32 *)(0x6800A050) &= ~0x00000010;} while(0)
 
-
 #define NAND_CTL_CLRALE(nandptr)
 #define NAND_CTL_SETALE(nandptr)
 #define NAND_CTL_CLRCLE(nandptr)
@@ -165,7 +164,6 @@
 #define NAND_DISABLE_CE(nand)
 #define NAND_ENABLE_CE(nand)
 
-
 #define CONFIG_BOOTDELAY         3
 
 #ifdef NFS_BOOT_DEFAULTS
@@ -261,9 +259,6 @@
 #define CFG_ENV_OFFSET	( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */
 #endif
 
-
-
-
 /*-----------------------------------------------------------------------
  * CFI FLASH driver setup
  */