Merge u-boot/master into u-boot-ti/master

In master we had already taken a patch to fix the davinci GPIO code for
CONFIG_SOC_DM646X and in u-boot-ti we have additional patches to support
DA830 (which is CONFIG_SOC_DA8XX && !CONFIG_SOC_DA850).  Resolve these
conflicts manually and comment the #else/#endif lines for clarity.

Conflicts:
	arch/arm/include/asm/arch-davinci/gpio.h
	drivers/gpio/da8xx_gpio.c

Signed-off-by: Tom Rini <trini@ti.com>

22 files changed, 287 insertions, 44 deletions

diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h
index 73c66af06d..ab4efa4b03 100644
--- a/include/configs/apx4devkit.h
+++ b/include/configs/apx4devkit.h
@@ -222,7 +222,7 @@
 		"root=ubi0:rootfs rootfstype=ubifs ${mtdparts} rw\0" \
 	"bootcmd_nand=" \
 		"run bootargs_nand && ubi part root 2048 && " \
-		"ubifsmount rootfs && ubifsload 41000000 boot/uImage && " \
+		"ubifsmount ubi:rootfs && ubifsload 41000000 boot/uImage && " \
 		"bootm 41000000\0" \
 	"bootargs_mmc=" \
 		"setenv bootargs ${kernelargs} " \
diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h
new file mode 100644
index 0000000000..02149fa94d
--- /dev/null
+++ b/include/configs/bf609-ezkit.h
@@ -0,0 +1,162 @@
+/*
+ * U-boot - Configuration file for BF609 EZ-Kit board
+ */
+
+#ifndef __CONFIG_BF609_EZKIT_H__
+#define __CONFIG_BF609_EZKIT_H__
+
+#include <asm/config-pre.h>
+
+/*
+ * Processor Settings
+ */
+#define CONFIG_BFIN_CPU             bf609-0.0
+#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
+
+
+/* For ez-board version 1.0, else undef this */
+#define CONFIG_BFIN_BOARD_VERSION_1_0
+
+/*
+ * Clock Settings
+ *	CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ *	SCLK = (CLKIN * VCO_MULT) / SYSCLK_DIV
+ *	SCLK0 = SCLK / SCLK0_DIV
+ *	SCLK1 = SCLK / SCLK1_DIV
+ */
+/* CONFIG_CLKIN_HZ is any value in Hz					*/
+#define CONFIG_CLKIN_HZ			(25000000)
+/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN		*/
+/*                                                1 = CLKIN / 2		*/
+#define CONFIG_CLKIN_HALF		(0)
+
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
+/* Values can range from 0-127 (where 0 means 128)			*/
+#define CONFIG_VCO_MULT			(20)
+
+/* CCLK_DIV controls the core clock divider				*/
+/* Values can range from 0-31 (where 0 means 32)			*/
+#define CONFIG_CCLK_DIV			(1)
+/* SCLK_DIV controls the system clock divider				*/
+/* Values can range from 0-31 (where 0 means 32)			*/
+#define CONFIG_SCLK_DIV		(4)
+/* Values can range from 0-7 (where 0 means 8)				*/
+#define CONFIG_SCLK0_DIV		(1)
+#define CONFIG_SCLK1_DIV		(1)
+/* DCLK_DIV controls the DDR clock divider				*/
+/* Values can range from 0-31 (where 0 means 32)			*/
+#define CONFIG_DCLK_DIV			(2)
+/* OCLK_DIV controls the output clock divider				*/
+/* Values can range from 0-127 (where 0 means 128)			*/
+#define CONFIG_OCLK_DIV			(16)
+
+/*
+ * Memory Settings
+ */
+#define CONFIG_MEM_SIZE		128
+
+#define CONFIG_SMC_GCTL_VAL	0x00000010
+#define CONFIG_SMC_B0CTL_VAL	0x01007011
+#define CONFIG_SMC_B0TIM_VAL	0x08170977
+#define CONFIG_SMC_B0ETIM_VAL	0x00092231
+
+#define CONFIG_SYS_MONITOR_LEN	(768 * 1024)
+#define CONFIG_SYS_MALLOC_LEN	(512 * 1024)
+
+#define CONFIG_HW_WATCHDOG
+/*
+ * Network Settings
+ */
+#define ADI_CMDS_NETWORK
+#define CONFIG_NETCONSOLE
+#define CONFIG_NET_MULTI
+#define CONFIG_HOSTNAME		"bf609-ezkit"
+#define CONFIG_DESIGNWARE_ETH
+#define CONFIG_DW_PORTS		1
+#define CONFIG_DW_AUTONEG
+#define CONFIG_DW_ALTDESCRIPTOR
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_MII
+
+/* i2c Settings */
+#define CONFIG_BFIN_TWI_I2C
+#define CONFIG_HARD_I2C
+
+/*
+ * Flash Settings
+ */
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_JFFS2
+#define CONFIG_SYS_FLASH_CFI_WIDTH     2
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_BASE          0xb0000000
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS     1
+#define CONFIG_SYS_MAX_FLASH_SECT      131
+#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+
+/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI6XX
+#define CONFIG_ENV_SPI_MAX_HZ	25000000
+#define CONFIG_SF_DEFAULT_SPEED	25000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ALL
+
+/*
+ * Env Storage Settings
+ */
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET       0x10000
+#define CONFIG_ENV_SIZE         0x2000
+#define CONFIG_ENV_SECT_SIZE    0x10000
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET       0x60000
+#define CONFIG_ENV_SIZE         0x20000
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_OFFSET       0x8000
+#define CONFIG_ENV_SIZE         0x8000
+#define CONFIG_ENV_SECT_SIZE    0x8000
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#endif
+
+#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0xB0100000\0"
+
+/*
+ * SDH Settings
+ */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_BFIN_SDH
+
+/*
+ * Misc Settings
+ */
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_UART_CONSOLE	0
+
+#define CONFIG_CMD_MEMORY
+
+#define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4)
+#define CONFIG_BFIN_SOFT_SWITCH
+
+#if 0
+#define CONFIG_UART_MEM 1024
+#undef CONFIG_UART_CONSOLE
+#undef CONFIG_JTAG_CONSOLE
+#undef CONFIG_UART_CONSOLE_IS_JTAG
+#endif
+
+/*
+ * Pull in common ADI header for remaining command/environment setup
+ */
+#include <configs/bfin_adi_common.h>
+#endif
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index ccdec0d564..d3ae3a71cd 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -10,7 +10,7 @@
  */
 #ifndef _CONFIG_CMD_DEFAULT_H
 # include <config_cmd_default.h>
-# if ADI_CMDS_NETWORK
+# ifdef ADI_CMDS_NETWORK
 #  define CONFIG_CMD_DHCP
 #  define CONFIG_BOOTP_SUBNETMASK
 #  define CONFIG_BOOTP_GATEWAY
@@ -58,7 +58,7 @@
 # endif
 # ifdef CONFIG_RTC_BFIN
 #  define CONFIG_CMD_DATE
-#  if ADI_CMDS_NETWORK
+#  ifdef ADI_CMDS_NETWORK
 #   define CONFIG_CMD_SNTP
 #  endif
 # endif
@@ -193,10 +193,12 @@
 		"nand erase 0 0x40000;" \
 		"nand write $(loadaddr) 0 0x40000"
 # else
-#  define UBOOT_ENV_UPDATE \
+#  ifndef UBOOT_ENV_UPDATE
+#   define UBOOT_ENV_UPDATE \
 		"protect off 0x20000000 +$(filesize);" \
 		"erase 0x20000000 +$(filesize);" \
 		"cp.b $(loadaddr) 0x20000000 $(filesize)"
+#  endif
 # endif
 # ifdef CONFIG_NETCONSOLE
 #  define NETCONSOLE_ENV \
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index a7a698c0ca..56528ddaaf 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -451,7 +451,7 @@
 	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage \0"		\
 	"kernel_addr_r=80600000\0"					\
 	"load_kernel=tftp ${kernel_addr_r} ${bootfile}\0"		\
-	"ubi_load_kernel=ubi part ubi 2048;ubifsmount ${img_volume};"	\
+	"ubi_load_kernel=ubi part ubi 2048;ubifsmount ubi:${img_volume};" \
 		"ubifsload ${kernel_addr_r} boot/uImage\0"		\
 	"fit_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0"		\
 	"img_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0"		\
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index c7f36ff148..49f05decc0 100644
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -42,6 +42,12 @@
 #define CONFIG_ZBOOT_32
 #define CONFIG_PHYSMEM
 
+#define CONFIG_LMB
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+#define CONFIG_DEFAULT_DEVICE_TREE	link
+
 /*-----------------------------------------------------------------------
  * Watchdog Configuration
  */
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index d926f74026..788227d79d 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -354,7 +354,6 @@
 
 /* SPL OS boot options */
 #define CONFIG_SPL_OS_BOOT
-#define CONFIG_SPL_OS_BOOT_KEY	26
 
 #define CONFIG_CMD_SPL
 #define CONFIG_CMD_SPL_WRITE_SIZE       0x400 /* 1024 byte */
diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h
index 249f93bf13..63d5e35e92 100644
--- a/include/configs/dockstar.h
+++ b/include/configs/dockstar.h
@@ -85,7 +85,7 @@
 #define CONFIG_BOOTCOMMAND \
 	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; "	\
 	"ubi part root; " \
-	"ubifsmount root; " \
+	"ubifsmount ubi:root; " \
 	"ubifsload 0x800000 ${kernel}; " \
 	"ubifsload 0x1100000 ${initrd}; " \
 	"bootm 0x800000 0x1100000"
diff --git a/include/configs/ea20.h b/include/configs/ea20.h
index 03dfe0af2d..90fc7c58d2 100644
--- a/include/configs/ea20.h
+++ b/include/configs/ea20.h
@@ -294,12 +294,12 @@
 		"bootm ${kernel_addr_r}\0"				\
 	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
 		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
-	"nand_nand=ubi part nand0,${as};ubifsmount rootfs;"		\
+	"nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"		\
 		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
 		"ubifsumount; run nandargs addip addtty "		\
 		"addmtd addmisc addmem;clrlogo;"			\
 		"bootm ${kernel_addr_r}\0"				\
-	"nand_nandrw=ubi part nand0,${as};ubifsmount rootfs;"		\
+	"nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;"	\
 		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
 		"ubifsumount; run nandrwargs addip addtty "		\
 		"addmtd addmisc addmem;clrlogo;"			\
@@ -310,7 +310,7 @@
 	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
 	"load_magic=if sf probe 0;then sf "				\
 		"read c0000000 0x10000 0x60000;fi\0"			\
-	"load_nand=ubi part nand0,${as};ubifsmount rootfs;"		\
+	"load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"		\
 		"if ubifsload c0000014 /boot/u-boot.bin;"		\
 		"then mw c0000008 ${filesize};else echo Error reading"	\
 		" u-boot from nand!;fi\0"				\
diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h
index f646ae5776..d3c664cd18 100644
--- a/include/configs/ib62x0.h
+++ b/include/configs/ib62x0.h
@@ -88,7 +88,7 @@
 #define CONFIG_BOOTCOMMAND \
 	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; "	\
 	"ubi part root; "						\
-	"ubifsmount root; "						\
+	"ubifsmount ubi:root; "						\
 	"ubifsload 0x800000 ${kernel}; "				\
 	"ubifsload 0x1100000 ${initrd}; "				\
 	"bootm 0x800000 0x1100000"
diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h
index ba57849a60..c882bfa606 100644
--- a/include/configs/iconnect.h
+++ b/include/configs/iconnect.h
@@ -87,7 +87,7 @@
 #define CONFIG_BOOTCOMMAND \
 	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; "	\
 	"ubi part rootfs; "						\
-	"ubifsmount rootfs; "						\
+	"ubifsmount ubi:rootfs; "					\
 	"ubifsload 0x800000 ${kernel}; "				\
 	"bootm 0x800000"
 
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index f64748e349..796f33080d 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -148,6 +148,14 @@
 	"ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0"
 #endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */
 
+#ifdef CONFIG_NAND_ECC_BCH
+#define CONFIG_KM_UIMAGE_NAME "ecc_bch_uImage\0"
+#define CONFIG_KM_ECC_MODE    " eccmode=bch"
+#else
+#define CONFIG_KM_UIMAGE_NAME "uImage\0"
+#define CONFIG_KM_ECC_MODE
+#endif
+
 /*
  * boottargets
  * - set 'subbootcmds'
@@ -184,6 +192,7 @@
 		":${hostname}:${netdev}:off3"				\
 		" console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}"	\
 		" mem=${kernelmem} init=${init}"			\
+		CONFIG_KM_ECC_MODE					\
 		" phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\
 		" " CONFIG_KM_UBI_LINUX_MTD " "				\
 		CONFIG_KM_DEF_BOOT_ARGS_CPU				\
@@ -210,9 +219,10 @@
  */
 #define CONFIG_KM_DEF_ENV_FLASH_BOOT					\
 	"cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0"		\
-	"cramfsloadkernel=cramfsload ${load_addr_r} uImage\0"		\
+	"cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}\0"	\
 	"ubicopy=ubi read "__stringify(CONFIG_KM_CRAMFS_ADDR)		\
 			" bootfs${boot_bank}\0"				\
+	"uimage=" CONFIG_KM_UIMAGE_NAME					\
 	CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
 
 /*
diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km8309-common.h
index b36e892cbe..7f9cffa3b7 100644
--- a/include/configs/km/km8309-common.h
+++ b/include/configs/km/km8309-common.h
@@ -22,7 +22,7 @@
 #define CONFIG_MPC830x		1	/* MPC830x family */
 #define CONFIG_MPC8309		1	/* MPC8309 CPU specific */
 
-#define CONFIG_KM_DEF_ARCH	"arch=ppc_8xx\0"
+#define CONFIG_KM_DEF_ARCH	"arch=ppc_82xx\0"
 #define CONFIG_CMD_DIAG		1
 
 /* include common defines/options for all 83xx Keymile boards */
@@ -33,8 +33,6 @@
 /* at end of uboot partition, before env */
 #define CONFIG_SYS_QE_FMAN_FW_ADDR   0xF00B0000
 
-#define CONFIG_MISC_INIT_R
-
 /*
  * System IO Config
  */
diff --git a/include/configs/km/km8321-common.h b/include/configs/km/km8321-common.h
index 8ad6fc3a33..abb908162a 100644
--- a/include/configs/km/km8321-common.h
+++ b/include/configs/km/km8321-common.h
@@ -38,8 +38,6 @@
 /* include common defines/options for all 83xx Keymile boards */
 #include "km83xx-common.h"
 
-#define CONFIG_MISC_INIT_R
-
 /*
  * System IO Config
  */
diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h
index a9823d6ef9..eb0e5b6f32 100644
--- a/include/configs/km/km83xx-common.h
+++ b/include/configs/km/km83xx-common.h
@@ -165,19 +165,15 @@
 #define CONFIG_UEC_ETH
 #define CONFIG_ETHPRIME		"UEC0"
 
+#if !defined(CONFIG_MPC8309)
 #define CONFIG_UEC_ETH1		/* GETH1 */
 #define UEC_VERBOSE_DEBUG	1
+#endif
 
 #ifdef CONFIG_UEC_ETH1
-#if defined(CONFIG_MPC8309)
-#define CONFIG_SYS_UEC1_UCC_NUM	2	/* UCC3 */
-#define CONFIG_SYS_UEC1_RX_CLK		QE_CLK_NONE /* not used in RMII Mode */
-#define CONFIG_SYS_UEC1_TX_CLK		QE_CLK12
-#else
 #define CONFIG_SYS_UEC1_UCC_NUM	3	/* UCC4 */
 #define CONFIG_SYS_UEC1_RX_CLK		QE_CLK_NONE /* not used in RMII Mode */
 #define CONFIG_SYS_UEC1_TX_CLK		QE_CLK17
-#endif
 #define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR	0
 #define CONFIG_SYS_UEC1_INTERFACE_TYPE	PHY_INTERFACE_MODE_RMII
@@ -316,7 +312,6 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONFIG_KM_DEF_ENV						\
 	CONFIG_KM_DEF_ARCH						\
-	"dtt_bus=pca9547:70:a\0"					\
 	"EEprom_ivm=pca9547:70:9\0"					\
 	"newenv="							\
 		"prot off 0xF00C0000 +0x40000 && "			\
diff --git a/include/configs/km8360.h b/include/configs/km8360.h
index 7631ab6a65..5b191bcdcd 100644
--- a/include/configs/km8360.h
+++ b/include/configs/km8360.h
@@ -25,6 +25,8 @@
 #define CONFIG_KM_BOARD_NAME	"kmcoge5ne"
 #define CONFIG_KM_DEF_NETDEV	"netdev=eth1\0"
 #define CONFIG_CMD_NAND
+#define CONFIG_NAND_ECC_BCH
+#define CONFIG_BCH
 #define CONFIG_NAND_KMETER1
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define NAND_MAX_CHIPS				1
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index ee888418c5..b77ce25880 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -180,7 +180,8 @@
 			"ext2load mmc1 0 ${loadaddr} autoboot.scr; then " \
 		"source ${loadaddr}; " \
 	"fi; " \
-	"ubi part boot && ubifsmount boot && ubifsload ${loadaddr} uImage && bootm ${loadaddr}"
+	"ubi part boot && ubifsmount ubi:boot && " \
+		"ubifsload ${loadaddr} uImage && bootm ${loadaddr}"
 
 #define CONFIG_AUTO_COMPLETE	1
 /*
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 9c431bf27a..406da43aa1 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -32,6 +32,13 @@
 #define CONFIG_OF_LIBFDT
 #define CONFIG_LMB
 
+#define CONFIG_FS_FAT
+#define CONFIG_FS_EXT4
+#define CONFIG_EXT4_WRITE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+
 #define CONFIG_SYS_VSNPRINTF
 
 #define CONFIG_CMD_GPIO
@@ -63,8 +70,8 @@
 #define CONFIG_SYS_HZ			1000
 
 /* Memory things - we don't really want a memory test */
-#define CONFIG_SYS_LOAD_ADDR		0x10000000
-#define CONFIG_SYS_MEMTEST_START	0x10000000
+#define CONFIG_SYS_LOAD_ADDR		0x00000000
+#define CONFIG_SYS_MEMTEST_START	0x00100000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x1000)
 #define CONFIG_PHYS_64BIT
 
@@ -85,6 +92,13 @@
 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_NFS
 
+#define CONFIG_CMD_HASH
+#define CONFIG_HASH_VERIFY
+#define CONFIG_SHA1
+#define CONFIG_SHA256
+
+#define CONFIG_CMD_SANDBOX
+
 #define CONFIG_BOOTARGS ""
 
 #define CONFIG_EXTRA_ENV_SETTINGS	"stdin=serial\0" \
diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h
index c50832c1e0..bbf9da545b 100644
--- a/include/configs/suvd3.h
+++ b/include/configs/suvd3.h
@@ -110,4 +110,41 @@
 				 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
 
+/*
+ * QE UEC ethernet configuration
+ */
+#if defined(CONFIG_KMVECT1)
+#define CONFIG_MV88E6352_SWITCH
+#define CONFIG_KM_MVEXTSW_ADDR		0x10
+
+/* ethernet port connected to simple switch 88e6122 (UEC0) */
+#define CONFIG_UEC_ETH1
+#define CONFIG_SYS_UEC1_UCC_NUM		0	/* UCC1 */
+#define CONFIG_SYS_UEC1_RX_CLK		QE_CLK9
+#define CONFIG_SYS_UEC1_TX_CLK		QE_CLK10
+
+#define CONFIG_FIXED_PHY		0xFFFFFFFF
+#define CONFIG_SYS_FIXED_PHY_ADDR	0x1E	/* unused address */
+#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
+		{devnum, speed, duplex}
+#define CONFIG_SYS_FIXED_PHY_PORTS \
+		CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL)
+
+#define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
+#define CONFIG_SYS_UEC1_PHY_ADDR	CONFIG_SYS_FIXED_PHY_ADDR
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE	PHY_INTERFACE_MODE_MII
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED	100
+
+/* ethernet port connected to piggy (UEC2) */
+#define CONFIG_HAS_ETH1
+#define CONFIG_UEC_ETH2
+#define CONFIG_SYS_UEC2_UCC_NUM		2       /* UCC3 */
+#define CONFIG_SYS_UEC2_RX_CLK		QE_CLK_NONE /* not used in RMII Mode */
+#define CONFIG_SYS_UEC2_TX_CLK		QE_CLK12
+#define CONFIG_SYS_UEC2_ETH_TYPE	FAST_ETH
+#define CONFIG_SYS_UEC2_PHY_ADDR	0
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE	PHY_INTERFACE_MODE_RMII
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED	100
+#endif /* CONFIG_KMVECT1 */
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 1a665ac3ac..ebd7a257f3 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -193,7 +193,7 @@
 		"bootm ${loadaddr}\0" \
 	"loaduimage_ubi=mtd default; " \
 		"ubi part fs; " \
-		"ubifsmount root; " \
+		"ubifsmount ubi:root; " \
 		"ubifsload ${loadaddr} /boot/uImage\0" \
 	"nandboot=echo Booting from nand ...; " \
 		"run nandargs; " \
diff --git a/include/configs/tuxx1.h b/include/configs/tuxx1.h
index 90d2e61147..6caf23a478 100644
--- a/include/configs/tuxx1.h
+++ b/include/configs/tuxx1.h
@@ -11,7 +11,7 @@
  * (C) Copyright 2008
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
- * (C) Copyright 2010-2012
+ * (C) Copyright 2010-2013
  * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com
  * Holger Brunck,  Keymile GmbH, holger.bruncl@keymile.com
  *
@@ -27,16 +27,20 @@
 /*
  * High Level Configuration Options
  */
-#ifdef CONFIG_KMSUPX5
+#if defined(CONFIG_KMSUPX5)
 #define CONFIG_KM_BOARD_NAME	"kmsupx5"
 #define CONFIG_HOSTNAME		kmsupx5
-#elif defined CONFIG_TUGE1
+#elif defined(CONFIG_TUGE1)
 #define CONFIG_KM_BOARD_NAME	"tuge1"
 #define CONFIG_HOSTNAME		tuge1
-#else
-#define CONFIG_TUXXX		/* TUXX1 board (tuxa1/tuda1) specific */
+#elif defined(CONFIG_TUXX1)	/* TUXX1 board (tuxa1/tuda1) specific */
 #define CONFIG_KM_BOARD_NAME	"tuxx1"
 #define CONFIG_HOSTNAME		tuxx1
+#elif defined(CONFIG_KMOPTI2)
+#define CONFIG_KM_BOARD_NAME	"kmopti2"
+#define CONFIG_HOSTNAME		kmopti2
+#else
+#error ("Board not supported")
 #endif
 
 #define	CONFIG_SYS_TEXT_BASE	0xF0000000
@@ -46,18 +50,18 @@
 
 #define CONFIG_SYS_APP1_BASE	0xA0000000    /* PAXG */
 #define	CONFIG_SYS_APP1_SIZE	256 /* Megabytes */
-#ifndef CONFIG_KM_DISABLE_APP2
+#if defined(CONFIG_TUXX1) || defined(CONFIG_KMOPTI2)
 #define CONFIG_SYS_APP2_BASE	0xB0000000    /* PINC3 */
 #define	CONFIG_SYS_APP2_SIZE	256 /* Megabytes */
 #endif
 
 /*
  * Init Local Bus Memory Controller:
- *
- * Bank Bus     Machine PortSz  Size  Device on TUDA1  TUXA1  TUGE1   KMSUPX4
- * ---- ---     ------- ------  -----  ---------------------------------------
- *  2   Local   GPCM    8 bit  256MB	         PAXG  LPXF   PAXI     LPXF
- *  3   Local   GPCM    8 bit  256MB	         PINC3 PINC2  unused   unused
+ *				      Device on
+ * Bank Bus     Machine PortSz  Size  TUDA1  TUXA1  TUGE1  KMSUPX4 KMOPTI2
+ * ---- ---     ------- ------  ----- ---------------------------------------
+ *  2   Local   GPCM    8 bit  256MB  PAXG  LPXF   PAXI     LPXF   PAXE
+ *  3   Local   GPCM    8 bit  256MB  PINC3 PINC2  unused  unused  OPI2(16 bit)
  *
  */
 
@@ -81,7 +85,7 @@
 				 OR_GPCM_TRLX_SET | \
 				 OR_GPCM_EHTR_CLEAR | \
 				 OR_GPCM_EAD)
-#ifndef CONFIG_KM_DISABLE_APP2
+#if defined(CONFIG_TUXX1)
 /*
  * Configuration for C3 on the local bus
  */
@@ -107,6 +111,22 @@
 				 MxMR_WLFx_2X)
 #endif
 
+#if defined(CONFIG_KMOPTI2)
+/*
+ * Configuration for C3 on the local bus
+ */
+#define CONFIG_SYS_LBLAWBAR3_PRELIM	CONFIG_SYS_APP2_BASE
+#define CONFIG_SYS_LBLAWAR3_PRELIM	(LBLAWAR_EN | LBLAWAR_256MB)
+#define CONFIG_SYS_BR3_PRELIM	(CONFIG_SYS_APP2_BASE | \
+				 BR_PS_16 |		\
+				 BR_MS_GPCM |		\
+				 BR_V)
+#define CONFIG_SYS_OR3_PRELIM	(MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
+				 OR_GPCM_SCY_4 | \
+				 OR_GPCM_TRLX_CLEAR | \
+				 OR_GPCM_EHTR_CLEAR)
+#endif
+
 /*
  * MMU Setup
  */
@@ -125,7 +145,7 @@
 				 BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
 
-#ifdef CONFIG_KM_DISABLE_APP2
+#if defined(CONFIG_TUGE1) || defined(CONFIG_KMSUPX5)
 #define CONFIG_SYS_IBAT6L	(0)
 #define CONFIG_SYS_IBAT6U	(0)
 #define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
diff --git a/include/configs/twister.h b/include/configs/twister.h
index a8524816a8..4205a11bca 100644
--- a/include/configs/twister.h
+++ b/include/configs/twister.h
@@ -58,7 +58,6 @@
 #define CONFIG_CMD_SPL_NAND_OFS	(CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\
 						0x600000)
 #define CONFIG_SPL_OS_BOOT
-#define CONFIG_SPL_OS_BOOT_KEY	55
 
 #define CONFIG_SYS_SPL_ARGS_ADDR	(PHYS_SDRAM_1 + 0x100)
 #define CONFIG_SPL_BOARD_INIT
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 3082aaa1e6..bb495a1c90 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -262,7 +262,7 @@
 	"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip"		\
 		" addcon addmisc addmtd;"				\
 		"bootm ${kernel_addr} - ${dtb_addr}\0"			\
-	"ubifs_mount=ubi part ubi${boot_part};ubifsmount rootfs\0"	\
+	"ubifs_mount=ubi part ubi${boot_part};ubifsmount ubi:rootfs\0"	\
 	"ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};"		\
 		"ubifsload ${dtb_addr} ${dtb_fs};\0"			\
 	"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon "	\