mx6sx: Add initial support for UDOO Neo Board

UDOO Neo Board is a development board from Seco that has three models:
 - UDOO Neo Basic
 - UDOO Neo Basic Kick Starter
 - UDOO Neo Extended
 - UDOO Neo Full

All versions are based on the i.MX6 SoloX processor.

For more details about the UDOO Neo board, please refer to:
http://www.udoo.org/udoo-neo/

This work is based on a previous commit of Francesco Montefoschi
<francesco.monte@gmail.com>:
https://github.com/fmntf/u-boot/commit/877b71184a5105e708024f232d36aed574961844

Only tested on the UDOO Neo Full board.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

1 files changed, 94 insertions, 0 deletions

diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h
new file mode 100644
index 0000000000..81e04810eb
--- /dev/null
+++ b/include/configs/udoo_neo.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright Jasbir Matharu
+ * Copyright 2015 UDOO Team
+ *
+ * Configuration settings for the UDOO NEO board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <config_distro_defaults.h>
+#include "mx6_common.h"
+
+#include "imx6_spl.h"
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_MXC_UART
+
+/* MMC Configuration */
+#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
+
+/* Command definition */
+#define CONFIG_MXC_UART_BASE		UART1_BASE
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+#define CONFIG_SYS_MMC_ENV_DEV		0  /*USDHC2*/
+
+/* Linux only */
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"console=ttymxc0,115200\0" \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"fdt_file=undefined\0" \
+	"fdt_addr=0x83000000\0" \
+	"ip_dyn=yes\0" \
+	"mmcdev=0\0" \
+	"mmcrootfstype=ext4\0" \
+	"mmcautodetect=no\0" \
+	"findfdt="\
+		"if test $board_name = BASIC; then " \
+			"setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \
+		"if test $board_name = BASICKS; then " \
+			"setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \
+		"if test $board_name = FULL; then " \
+			"setenv fdt_file imx6sx-udoo-neo-full.dtb; fi; " \
+		"if test $board_name = EXTENDED; then " \
+			"setenv fdt_file imx6sx-udoo-neo-extended.dtb; fi; " \
+		"if test $fdt_file = UNDEFINED; then " \
+			"echo WARNING: Could not determine dtb to use; fi; \0" \
+	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"ramdisk_addr_r=0x83000000\0" \
+	"ramdiskaddr=0x83000000\0" \
+	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+	BOOTENV
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0)
+
+#define CONFIG_BOOTCOMMAND \
+	"run findfdt; " \
+	"run distro_bootcmd"
+
+#include <config_distro_bootcmd.h>
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x10000)
+#define CONFIG_STACKSIZE		SZ_128K
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* Environment organization */
+#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
+#define CONFIG_ENV_SIZE			SZ_8K
+#define CONFIG_ENV_IS_IN_MMC
+
+#endif				/* __CONFIG_H */