ea20: remove board

This board still doesn't select CONFIG_DM and seems to be umaintained.
As it makes progress on modernizing several DaVinci drivers more
difficult and the maintainer has not expressed interest in updating
it, this patch proposes to remove it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Stefano Babic <sbabic@denx.de>

1 files changed, 0 insertions, 227 deletions

diff --git a/include/configs/ea20.h b/include/configs/ea20.h
deleted file mode 100644
index 88f2e17d40..0000000000
--- a/include/configs/ea20.h
+++ /dev/null
@@ -1,227 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on davinci_dvevm.h. Original Copyrights follow:
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Board
- */
-#define CONFIG_USE_SPIFLASH
-#define	CONFIG_SYS_USE_NAND
-#define CONFIG_DRIVER_TI_EMAC_USE_RMII
-#define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE
-#define CONFIG_PREBOOT
-
-/*
- * SoC Configuration
- */
-#define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
-#define CONFIG_SYS_OSCIN_FREQ		24000000
-#define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
-#define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Memory Info
- */
-#define CONFIG_SYS_MALLOC_LEN	(0x10000 + 4*1024*1024) /* malloc() len */
-#define PHYS_SDRAM_1		DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
-#define PHYS_SDRAM_1_SIZE	(64 << 20) /* SDRAM size 64MB */
-#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
-
-/* memtest start addr */
-#define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + 0x2000000)
-
-/* memtest will be run on 16MB */
-#define CONFIG_SYS_MEMTEST_END	(PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
-
-/*
- * Serial Driver info
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
-#define CONFIG_SYS_NS16550_COM1	DAVINCI_UART0_BASE /* Base address of UART0 */
-#define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
-
-#define CONFIG_SYS_SPI_BASE		DAVINCI_SPI1_BASE
-#define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI1_CLKID)
-
-/*
- * I2C Configuration
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_DAVINCI_I2C_SPEED		100000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE   10 /* Bogus, master-only in U-Boot */
-
-/*
- * Network & Ethernet Configuration
- */
-#ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT	10
-#endif
-
-#ifdef CONFIG_USE_SPIFLASH
-#define CONFIG_ENV_SIZE			(8 << 10)
-#define CONFIG_ENV_OFFSET		0x80000
-#define CONFIG_ENV_SECT_SIZE		(64 << 10)
-#endif
-
-#if defined(CONFIG_VIDEO)
-#define CONFIG_VIDEO_DA8XX
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_LOGO
-#endif
-
-/*
- * U-Boot general configuration
- */
-#define CONFIG_BOOTFILE		"uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_MX_CYCLIC
-
-/*
- * Linux Information
- */
-#define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-/* NAND Setup */
-#ifdef CONFIG_SYS_USE_NAND
-#define	CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_NAND_NO_SUBPAGE
-#define CONFIG_SYS_NAND_CS		2
-#define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
-#undef CONFIG_SYS_NAND_HW_ECC
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
-#define	CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
-#endif
-
-#if !defined(CONFIG_SYS_USE_NAND) && \
-	!defined(CONFIG_USE_NOR) && \
-	!defined(CONFIG_USE_SPIFLASH)
-#define CONFIG_ENV_SIZE		(16 << 10)
-#endif
-
-/* additions for new relocation code, must added to all boards */
-#define CONFIG_SYS_SDRAM_BASE		0xc0000000
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
-					GENERATED_GBL_DATA_SIZE)
-/*
- * Default environment and default scripts
- * to update uboot and load kernel
- */
-
-#define CONFIG_HOSTNAME "ea20"
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"as=3\0"							\
-	"netdev=eth0\0"						\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"rfsbargs=setenv bootargs root=/dev/nfs rw "			\
-	"nfsroot=${serverip}:${rfsbpath}\0"				\
-	"testrfsargs=setenv bootargs root=/dev/nfs rw "		\
-	"nfsroot=${serverip}:${testrfspath}\0"				\
-	"ramargs=setenv bootargs root=/dev/ram rw initrd="		\
-	"0x${ramdisk_addr_r},4M\0"					\
-	"mtdids=nand0=davinci_nand.0\0"				\
-	"serverip=192.168.5.249\0"					\
-	"ipaddr=192.168.5.248\0"					\
-	"rootpath=/opt/eldk/arm\0"					\
-	"splashpos=230,180\0"						\
-	"testrfspath=/opt/eldk/test_arm\0"				\
-	"nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc "	\
-	"ubi.mtd=${as} root=ubi0:rootfs\0"				\
-	"nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc "	\
-	"ubi.mtd=${as} root=ubi0:rootfs\0"				\
-	"addip_sta=setenv bootargs ${bootargs} "			\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
-	"addip=if test -n ${ipdyn};then run addip_dyn;"		\
-		"else run addip_sta;fi\0"				\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"addtty=setenv bootargs ${bootargs}"				\
-		" console=${consoledev},${baudrate}n8\0"		\
-	"addmisc=setenv bootargs ${bootargs} ${misc}\0"		\
-	"addmem=setenv bootargs ${bootargs} mem=${memory}\0"		\
-	"consoledev=ttyS0\0"						\
-	"loadaddr=c0000014\0"						\
-	"memory=32M\0"							\
-	"kernel_addr_r=c0700000\0"					\
-	"hostname=" CONFIG_HOSTNAME "\0"			\
-	"bootfile=" CONFIG_HOSTNAME "/uImage\0"		\
-	"ramdisk_file=" CONFIG_HOSTNAME "/image.ext2\0"	\
-	"flash_self=run ramargs addip addtty addmtd addmisc addmem;"	\
-			"bootm ${kernel_addr_r}\0"			\
-	"flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;"	\
-		"bootm ${kernel_addr}\0"				\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
-		"run nfsargs addip addtty addmtd addmisc addmem;"	\
-		"bootm ${kernel_addr_r}\0"				\
-	"net_rfsb=tftp ${kernel_addr_r} ${bootfile}; "			\
-		"run rfsbargs addip addtty addmtd addmisc addmem; "	\
-		"bootm ${kernel_addr_r}\0"				\
-	"net_testrfs=tftp ${kernel_addr_r} ${bootfile}; "		\
-		"run testrfsargs addip addtty addmtd addmisc addmem; "	\
-		"bootm ${kernel_addr_r}\0"				\
-	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
-		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
-	"nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"		\
-		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
-		"ubifsumount; run nandargs addip addtty "		\
-		"addmtd addmisc addmem;clrlogo;"			\
-		"bootm ${kernel_addr_r}\0"				\
-	"nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;"	\
-		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
-		"ubifsumount; run nandrwargs addip addtty "		\
-		"addmtd addmisc addmem;clrlogo;"			\
-		"bootm ${kernel_addr_r}\0"				\
-	"net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs"	\
-		" addip addtty addmtd addmisc addmem;"			\
-		"clrlogo;bootm ${kernel_addr_r}\0"			\
-	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"		\
-	"load_magic=if sf probe 0;then sf "				\
-		"read c0000000 0x10000 0x60000;fi\0"			\
-	"load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"		\
-		"if ubifsload c0000014 /boot/u-boot.bin;"		\
-		"then mw c0000008 ${filesize};else echo Error reading"	\
-		" u-boot from nand!;fi\0"				\
-	"load_net=if sf probe 0;then sf read c0000000 0x10000 "	\
-		"0x60000;tftp c0000014 ${u-boot};"			\
-		"mw c0000008 ${filesize};fi\0"				\
-	"upd=if sf probe 0;then sf erase 10000 60000;"			\
-		"sf write c0000000 10000 60000;fi\0"			\
-	"ublupdate=if tftp C0700000 ${ublname};then sf probe 0; "	\
-		"sf erase 0 10000;"					\
-		"sf write 0xc0700000 0 ${filesize};fi\0"		\
-	"ubootupd_net=if run load_net;then echo Updating u-boot;"	\
-		"if run upd; then echo U-Boot updated;"		\
-			"else echo Error updating u-boot !;"		\
-			"echo Board without bootloader !!;"		\
-		"fi;"							\
-		"else echo U-Boot not downloaded..exiting;fi\0"	\
-	"ubootupd_nand=echo run load_magic,run load_nand,run upd;\0"	\
-	"bootcmd=run net_testrfs\0"
-
-#include <asm/arch/hardware.h>
-
-#endif /* __CONFIG_H */