am335x: Initial support for Silica Pengwyn board

This patch add support for the Silica Pengwyn board [1]
The board is based on a TI AM3354 CPU [2]
All jumpers removed it will boot from the SDcard, the console is on
UART1 accessible via the FDTI -> USB. The on board NAND flash is
supported and can act as boot medium, depending on jumper settings.
USB Host, USB Device and Ethernet are also provided but untested.

[1]
http://www.silica.com/product/silica-pengwyn-board.html
[2]
http://www.ti.com/product/am3354

Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[trini: Move CONFIG_BOARD_LATE_INIT into am335x_evm.h, drop unused
spi0_pin_mux from Pengwyn support]
Signed-off-by: Tom Rini <trini@ti.com>

3 files changed, 209 insertions, 1 deletions

diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 73a9adb293..96ae369c6a 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -20,6 +20,7 @@
 
 #define MACH_TYPE_TIAM335EVM		3589	/* Until the next sync */
 #define CONFIG_MACH_TYPE		MACH_TYPE_TIAM335EVM
+#define CONFIG_BOARD_LATE_INIT
 
 /* Clock Defines */
 #define V_OSCK				24000000  /* Clock output from T2 */
diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h
new file mode 100644
index 0000000000..5a555567d0
--- /dev/null
+++ b/include/configs/pengwyn.h
@@ -0,0 +1,208 @@
+/*
+ * pengwyn.h
+ *
+ * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com>
+ *
+ * based on am335x_evm.h, Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_PENGWYN_H
+#define __CONFIG_PENGWYN_H
+
+#define CONFIG_NAND
+#define CONFIG_SERIAL1
+#define CONFIG_CONS_INDEX		1
+
+#include <configs/ti_am335x_common.h>
+
+/* Clock Defines */
+#define V_OSCK				24000000
+#define V_SCLK				V_OSCK
+
+/* set env size */
+#define CONFIG_ENV_SIZE			0x4000
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x80200000\0" \
+	"fdtaddr=0x80F80000\0" \
+	"bootpart=0:2\0" \
+	"bootdir=/boot\0" \
+	"bootfile=zImage\0" \
+	"fdtfile=am335x-pengwyn.dtb\0" \
+	"console=ttyO0,115200n8\0" \
+	"optargs=\0" \
+	"mmcdev=0\0" \
+	"mmcroot=/dev/mmcblk0p2 ro\0" \
+	"mmcrootfstype=ext4 rootwait\0" \
+	"rootpath=/export/rootfs\0" \
+	"nfsopts=nolock\0" \
+	"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
+		"::off\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
+	"netargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=/dev/nfs " \
+		"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
+		"ip=dhcp\0" \
+	"bootenv=uEnv.txt\0" \
+	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+	"importbootenv=echo Importing environment from mmc ...; " \
+		"env import -t $loadaddr $filesize\0" \
+	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+	"mmcloados=run mmcargs; " \
+		"bootz ${loadaddr} - ${fdtaddr};\0" \
+	"mmcboot=mmc dev ${mmcdev}; " \
+		"if mmc rescan; then " \
+			"echo SD/MMC found on device ${mmcdev};" \
+			"if run loadbootenv; then " \
+				"echo Loaded environment from ${bootenv};" \
+				"run importbootenv;" \
+			"fi;" \
+			"if test -n $uenvcmd; then " \
+				"echo Running uenvcmd ...;" \
+				"run uenvcmd;" \
+			"fi;" \
+			"if run loadimage; then " \
+				"run loadfdt;" \
+				"run mmcloados;" \
+			"fi;" \
+		"fi;\0" \
+	"netboot=echo Booting from network ...; " \
+		"setenv autoload no; " \
+		"dhcp; " \
+		"tftp ${loadaddr} ${bootfile}; " \
+		"tftp ${fdtaddr} ${fdtfile}; " \
+		"run netargs; " \
+		"bootz ${loadaddr} - ${fdtaddr}\0" \
+	"mtdids=" MTDIDS_DEFAULT "\0" \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"nandargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype}\0" \
+	"nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \
+	"nandrootfstype=ubifs rootwait=1\0" \
+	"nandboot=echo Booting from nand ...; " \
+		"run nandargs; " \
+		"nand read ${fdtaddr} u-boot-spl-os; " \
+		"nand read ${loadaddr} kernel; " \
+		"bootz ${loadaddr} - ${fdtaddr}\0"
+#endif
+
+#define CONFIG_BOOTCOMMAND \
+	"run mmcboot;" \
+	"run nandboot;"
+
+/* NS16550 Configuration: primary UART via FDTI */
+#define CONFIG_SYS_NS16550_COM1		0x44e09000
+#define CONFIG_BAUDRATE			115200
+
+/* I2C Configuration */
+#define	CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_CMD_EEPROM
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+
+/* SPL */
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_YMODEM_SUPPORT
+
+/* General network SPL */
+#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"
+
+/* NAND support */
+#define CONFIG_CMD_NAND
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_ELM
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
+					 CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
+					 10, 11, 12, 13, 14, 15, 16, 17, \
+					 18, 19, 20, 21, 22, 23, 24, 25, \
+					 26, 27, 28, 29, 30, 31, 32, 33, \
+					 34, 35, 36, 37, 38, 39, 40, 41, \
+					 42, 43, 44, 45, 46, 47, 48, 49, \
+					 50, 51, 52, 53, 54, 55, 56, 57, }
+
+#define CONFIG_SYS_NAND_ECCSIZE		512
+#define CONFIG_SYS_NAND_ECCBYTES	14
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+
+#define GPMC_NAND_ECC_LP_x8_LAYOUT	1
+#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:128k(SPL)," \
+					"128k(SPL.backup1)," \
+					"128k(SPL.backup2)," \
+					"128k(SPL.backup3),1792k(u-boot)," \
+					"128k(u-boot-spl-os)," \
+					"128k(u-boot-env),5m(kernel),-(rootfs)"
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET		0x260000 /* environment starts here */
+#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
+
+/*
+ * USB configuration.  We enable MUSB support, both for host and for
+ * gadget.  We set USB0 as peripheral and USB1 as host, based on the
+ * board schematic and physical port wired to each.  Then for host we
+ * add mass storage support.
+ */
+#define CONFIG_USB_MUSB_DSPS
+#define CONFIG_ARCH_MISC_INIT
+#define CONFIG_MUSB_GADGET
+#define CONFIG_MUSB_PIO_ONLY
+#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW	2
+#define CONFIG_MUSB_HOST
+#define CONFIG_AM335X_USB0
+#define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
+#define CONFIG_AM335X_USB1
+#define CONFIG_AM335X_USB1_MODE MUSB_HOST
+
+#if defined(CONFIG_MUSB_HOST)
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#endif
+
+#if defined(CONFIG_SPL_BUILD)
+/* disable host part of MUSB in SPL */
+#undef CONFIG_MUSB_HOST
+/* Disable CPSW SPL support so we fit within the 101KiB limit. */
+#undef CONFIG_SPL_ETH_SUPPORT
+#endif
+
+/* Network */
+#define CONFIG_CMD_MII
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ADDR		1
+#define CONFIG_PHY_RESET	1
+#define CONFIG_PHY_NATSEMI
+
+/* CPSW support */
+#define CONFIG_SPL_ETH_SUPPORT
+
+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/am33xx/u-boot-spl.lds"
+
+#endif	/* ! __CONFIG_PENGWYN_H */
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 91f97dd061..7e9ca01cd5 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -13,7 +13,6 @@
 #define __CONFIG_TI_AM335X_COMMON_H__
 
 #define CONFIG_AM33XX
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SYS_CACHELINE_SIZE       64
 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */