PXA: Drop CERF250 board

The board is unmaintained and maintainer doesn't respond.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Anatolij Gustschin <agust@denx.de>

1 files changed, 0 insertions, 229 deletions

diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h
deleted file mode 100644
index 70427daca2..0000000000
--- a/include/configs/cerf250.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the CERF250 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_PXA250		1	/* This is an PXA250 CPU    */
-#define CONFIG_CERF250		1	/* on Cerf PXA Board	    */
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_BAUDRATE		38400
-#define	CONFIG_SYS_TEXT_BASE	0x0
-
-#undef	CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE 0x04000300
-#define CONFIG_SMC_USE_32_BIT
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART	     1	/* we use FFUART on CERF PXA */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_ETHADDR		00:D0:CA:F1:3C:D2
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.0.5
-#define CONFIG_SERVERIP		192.168.0.2
-#define CONFIG_BOOTCOMMAND	"bootm 0xC0000"
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,38400"
-#define CONFIG_CMDLINE_TAG
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER		1
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-
-#define CONFIG_SYS_LONGHELP					/* undef to save memory		*/
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT			"uboot$ "	/* Monitor Command Prompt */
-#else
-#define CONFIG_SYS_PROMPT			"=> "		/* Monitor Command Prompt */
-#endif
-#define CONFIG_SYS_CBSIZE			256			/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-										/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS			16			/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_DEVICE_NULLDEV	1
-
-#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0xa2000000	/* default load address */
-
-#define CONFIG_SYS_HZ			1000
-#define CONFIG_SYS_CPUSPEED		0x141		/* set core clock to 400/200/100 MHz */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE		(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS		1		/* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE		0x04000000	/* 64 MB */
-
-#define PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
-#define PHYS_FLASH_2			0x04000000	/* Flash Bank #2 */
-#define PHYS_FLASH_SIZE			0x02000000	/* 32 MB */
-#define PHYS_FLASH_BANK_SIZE		0x02000000	/* 32 MB Banks */
-#define PHYS_FLASH_SECT_SIZE		0x00040000	/* 256 KB sectors (x2) */
-
-#define CONFIG_SYS_DRAM_BASE			0xa0000000
-#define CONFIG_SYS_DRAM_SIZE			0x04000000
-
-#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define	CONFIG_SYS_INIT_SP_ADDR		(GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
-
-/*
- * GPIO settings
- */
-
-
-#define CONFIG_SYS_GPSR0_VAL		0x00408030
-#define CONFIG_SYS_GPSR1_VAL		0x00BFA882
-#define CONFIG_SYS_GPSR2_VAL		0x0001C000
-#define CONFIG_SYS_GPCR0_VAL		0xC0031100
-#define CONFIG_SYS_GPCR1_VAL		0xFC400300
-#define CONFIG_SYS_GPCR2_VAL		0x00003FFF
-#define CONFIG_SYS_GPDR0_VAL		0xC0439330
-#define CONFIG_SYS_GPDR1_VAL		0xFCFFAB82
-#define CONFIG_SYS_GPDR2_VAL		0x0001FFFF
-#define CONFIG_SYS_GAFR0_L_VAL		0x80000000
-#define CONFIG_SYS_GAFR0_U_VAL		0xA5000010
-#define CONFIG_SYS_GAFR1_L_VAL		0x60008018
-#define CONFIG_SYS_GAFR1_U_VAL		0xAAA5AAAA
-#define CONFIG_SYS_GAFR2_L_VAL		0xAAA0000A
-#define CONFIG_SYS_GAFR2_U_VAL		0x00000002
-
-#define CONFIG_SYS_PSSR_VAL		0x20
-
-#define	CONFIG_SYS_CCCR			CCCR_L27|CCCR_M2|CCCR_N10
-#define	CONFIG_SYS_CKEN			0x0
-
-/*
- * Memory settings
- */
-#define CONFIG_SYS_MSC0_VAL		0x12447FF0
-#define CONFIG_SYS_MSC1_VAL		0x12BC5554
-#define CONFIG_SYS_MSC2_VAL		0x7FF97FF1
-#define CONFIG_SYS_MDCNFG_VAL		0x00001AC9
-#define CONFIG_SYS_MDREFR_VAL		0x03CDC017
-#define CONFIG_SYS_MDMRS_VAL		0x00000000
-#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
-#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL		0x00000000
-#define CONFIG_SYS_MCMEM0_VAL		0x00010504
-#define CONFIG_SYS_MCMEM1_VAL		0x00010504
-#define CONFIG_SYS_MCATT0_VAL		0x00010504
-#define CONFIG_SYS_MCATT1_VAL		0x00010504
-#define CONFIG_SYS_MCIO0_VAL		0x00004715
-#define CONFIG_SYS_MCIO1_VAL		0x00004715
-
-#define _LED			0x08000010	/*check this */
-#define LED_BLANK		0x08000040
-#define LED_GPIO		0x10
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max number of sectors on one chip    */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_SYS_MONITOR_LEN		0x40000		/* 256 KiB */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
-
-
-#endif	/* __CONFIG_H */