* Patch by Nicolas Lacressonniere, 11 Jun 2003:

  Modifications for Atmel AT91RM9200DK ARM920T based development kit
  - Add Atmel DataFlash support for reading and writing.
  - Add possibility to boot a Linux from DataFlash with BOOTM command.
  - Add Flash detection on Atmel AT91RM9200DK
    (between Atmel AT49BV1614 and AT49BV1614A flashes)
  - Replace old Ethernet PHY layer functions
  - Change link address

* Patch by Frank Smith, 9 Jun 2003:
  use CRIT_EXCEPTION for machine check on 4xx

* Patch by Detlev Zundel, 13 Jun 2003:
  added implementation of the "carinfo" command in cmd_immap.c

1 files changed, 130 insertions, 0 deletions

diff --git a/include/dm9161.h b/include/dm9161.h
new file mode 100644
index 0000000000..62999210a3
--- /dev/null
+++ b/include/dm9161.h
@@ -0,0 +1,130 @@
+/*
+ * NOTE:	DAVICOM ethernet Physical layer 
+ *
+ * Version:	@(#)DM9161.h	1.0.0	01/10/2001
+ *
+ * Authors:	ATMEL Rousset
+ *
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+
+// DAVICOM PHYSICAL LAYER TRANSCEIVER DM9161
+
+#define	DM9161_BMCR 		0	// Basic Mode Control Register
+#define DM9161_BMSR		1	// Basic Mode Status Register
+#define DM9161_PHYID1		2	// PHY Idendifier Register 1
+#define DM9161_PHYID2		3	// PHY Idendifier Register 2
+#define DM9161_ANAR		4	// Auto_Negotiation Advertisement Register 
+#define DM9161_ANLPAR		5	// Auto_negotiation Link Partner Ability Register
+#define DM9161_ANER		6	// Auto-negotiation Expansion Register 
+#define DM9161_DSCR		16	// Specified Configuration Register
+#define DM9161_DSCSR		17	// Specified Configuration and Status Register
+#define DM9161_10BTCSR		18	// 10BASE-T Configuration and Satus Register
+#define DM9161_MDINTR		21	// Specified Interrupt Register
+#define DM9161_RECR		22	// Specified Receive Error Counter Register
+#define DM9161_DISCR		23	// Specified Disconnect Counter Register
+#define DM9161_RLSR		24	// Hardware Reset Latch State Register
+
+
+// --Bit definitions: DM9161_BMCR
+#define DM9161_RESET   	         (1 << 15)	// 1= Software Reset; 0=Normal Operation
+#define DM9161_LOOPBACK	         (1 << 14)	// 1=loopback Enabled; 0=Normal Operation
+#define DM9161_SPEED_SELECT      (1 << 13)	// 1=100Mbps; 0=10Mbps
+#define DM9161_AUTONEG	         (1 << 12)
+#define DM9161_POWER_DOWN        (1 << 11)
+#define DM9161_ISOLATE           (1 << 10)	
+#define DM9161_RESTART_AUTONEG   (1 << 9)
+#define DM9161_DUPLEX_MODE       (1 << 8)
+#define DM9161_COLLISION_TEST    (1 << 7)
+
+//--Bit definitions: DM9161_BMSR
+#define DM9161_100BASE_T4        (1 << 15)
+#define DM9161_100BASE_TX_FD     (1 << 14)
+#define DM9161_100BASE_T4_HD     (1 << 13)
+#define DM9161_10BASE_T_FD       (1 << 12)
+#define DM9161_10BASE_T_HD       (1 << 11)
+#define DM9161_MF_PREAMB_SUPPR   (1 << 6)
+#define DM9161_AUTONEG_COMP      (1 << 5)
+#define DM9161_REMOTE_FAULT      (1 << 4)
+#define DM9161_AUTONEG_ABILITY   (1 << 3)
+#define DM9161_LINK_STATUS       (1 << 2)
+#define DM9161_JABBER_DETECT     (1 << 1)
+#define DM9161_EXTEND_CAPAB      (1 << 0)
+
+//--definitions: DM9161_PHYID1
+#define DM9161_PHYID1_OUI	 0x606E
+#define DM9161_LSB_MASK	         0x3F
+
+//--Bit definitions: DM9161_ANAR, DM9161_ANLPAR
+#define DM9161_NP               (1 << 15)
+#define DM9161_ACK              (1 << 14)
+#define DM9161_RF               (1 << 13)
+#define DM9161_FCS              (1 << 10)
+#define DM9161_T4               (1 << 9)
+#define DM9161_TX_FDX           (1 << 8)
+#define DM9161_TX_HDX           (1 << 7)
+#define DM9161_10_FDX           (1 << 6)
+#define DM9161_10_HDX           (1 << 5)
+#define DM9161_AN_IEEE_802_3	0x0001
+
+//--Bit definitions: DM9161_ANER
+#define DM9161_PDF              (1 << 4)
+#define DM9161_LP_NP_ABLE       (1 << 3)
+#define DM9161_NP_ABLE          (1 << 2)
+#define DM9161_PAGE_RX          (1 << 1)
+#define DM9161_LP_AN_ABLE       (1 << 0)
+
+//--Bit definitions: DM9161_DSCR
+#define DM9161_BP4B5B           (1 << 15)
+#define DM9161_BP_SCR           (1 << 14)
+#define DM9161_BP_ALIGN         (1 << 13)
+#define DM9161_BP_ADPOK         (1 << 12)
+#define DM9161_REPEATER         (1 << 11)
+#define DM9161_TX               (1 << 10)
+#define DM9161_RMII_ENABLE      (1 << 8)
+#define DM9161_F_LINK_100       (1 << 7)
+#define DM9161_SPLED_CTL        (1 << 6)
+#define DM9161_COLLED_CTL       (1 << 5)
+#define DM9161_RPDCTR_EN        (1 << 4)
+#define DM9161_SM_RST           (1 << 3)
+#define DM9161_MFP SC           (1 << 2)
+#define DM9161_SLEEP            (1 << 1)
+#define DM9161_RLOUT            (1 << 0)
+
+//--Bit definitions: DM9161_DSCSR
+#define DM9161_100FDX           (1 << 15)
+#define DM9161_100HDX           (1 << 14)
+#define DM9161_10FDX            (1 << 13)
+#define DM9161_10HDX            (1 << 12)
+
+//--Bit definitions: DM9161_10BTCSR
+#define DM9161_LP_EN           (1 << 14)
+#define DM9161_HBE             (1 << 13)
+#define DM9161_SQUELCH         (1 << 12)
+#define DM9161_JABEN           (1 << 11)
+#define DM9161_10BT_SER        (1 << 10)
+#define DM9161_POLR            (1 << 0)
+
+
+//--Bit definitions: DM9161_MDINTR
+#define DM9161_INTR_PEND       (1 << 15)
+#define DM9161_FDX_MASK        (1 << 11)
+#define DM9161_SPD_MASK        (1 << 10)
+#define DM9161_LINK_MASK       (1 << 9)
+#define DM9161_INTR_MASK       (1 << 8)
+#define DM9161_FDX_CHANGE      (1 << 4)
+#define DM9161_SPD_CHANGE      (1 << 3)
+#define DM9161_LINK_CHANGE     (1 << 2)
+#define DM9161_INTR_STATUS     (1 << 0)
+
+
+/******************  function prototypes **********************/
+static unsigned int dm9161_IsPhyConnected(AT91PS_EMAC p_mac);
+static unsigned char  dm9161_GetLinkSpeed(AT91PS_EMAC p_mac);
+static unsigned char dm9161_AutoNegotiate(AT91PS_EMAC p_mac, int *status);
+static unsigned char dm9161_InitPhy(AT91PS_EMAC p_mac);