mtd: nand: Remove docg4 driver and palmtreo680 flashing tool

Commit ad4f54ea86b ("arm: Remove palmtreo680 board") removed the only
user of the docg4 driver and the palmtreo680 image flashing tool.  This
patch removes them.

Signed-off-by: Scott Wood <oss@buserror.net>
Cc: Mike Dunn <mikedunn@newsguy.com>
Cc: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 132 deletions

diff --git a/include/linux/mtd/docg4.h b/include/linux/mtd/docg4.h
deleted file mode 100644
index 741fc0db46..0000000000
--- a/include/linux/mtd/docg4.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __DOCG4_H__
-#define __DOCG4_H__
-
-#include <common.h>
-#include <linux/mtd/nand.h>
-
-extern int docg4_nand_init(struct mtd_info *mtd,
-			   struct nand_chip *nand, int devnum);
-
-/* SPL-related definitions */
-#define DOCG4_IPL_LOAD_BLOCK_COUNT 2  /* number of blocks that IPL loads */
-#define DOCG4_BLOCK_CAPACITY_SPL 0x10000 /* reliable mode; redundant pages */
-
-#define DOC_IOSPACE_DATA		0x0800
-
-/* register offsets */
-#define DOC_CHIPID			0x1000
-#define DOC_DEVICESELECT		0x100a
-#define DOC_ASICMODE			0x100c
-#define DOC_DATAEND			0x101e
-#define DOC_NOP				0x103e
-
-#define DOC_FLASHSEQUENCE		0x1032
-#define DOC_FLASHCOMMAND		0x1034
-#define DOC_FLASHADDRESS		0x1036
-#define DOC_FLASHCONTROL		0x1038
-#define DOC_ECCCONF0			0x1040
-#define DOC_ECCCONF1			0x1042
-#define DOC_HAMMINGPARITY		0x1046
-#define DOC_BCH_SYNDROM(idx)		(0x1048 + idx)
-
-#define DOC_ASICMODECONFIRM		0x1072
-#define DOC_CHIPID_INV			0x1074
-#define DOC_POWERMODE			0x107c
-
-#define DOCG4_MYSTERY_REG		0x1050
-
-/* apparently used only to write oob bytes 6 and 7 */
-#define DOCG4_OOB_6_7			0x1052
-
-/* DOC_FLASHSEQUENCE register commands */
-#define DOC_SEQ_RESET			0x00
-#define DOCG4_SEQ_PAGE_READ		0x03
-#define DOCG4_SEQ_FLUSH			0x29
-#define DOCG4_SEQ_PAGEWRITE		0x16
-#define DOCG4_SEQ_PAGEPROG		0x1e
-#define DOCG4_SEQ_BLOCKERASE		0x24
-
-/* DOC_FLASHCOMMAND register commands */
-#define DOCG4_CMD_PAGE_READ             0x00
-#define DOC_CMD_ERASECYCLE2		0xd0
-#define DOCG4_CMD_FLUSH                 0x70
-#define DOCG4_CMD_READ2                 0x30
-#define DOC_CMD_PROG_BLOCK_ADDR		0x60
-#define DOCG4_CMD_PAGEWRITE		0x80
-#define DOC_CMD_PROG_CYCLE2		0x10
-#define DOC_CMD_RESET			0xff
-
-/* DOC_POWERMODE register bits */
-#define DOC_POWERDOWN_READY		0x80
-
-/* DOC_FLASHCONTROL register bits */
-#define DOC_CTRL_CE			0x10
-#define DOC_CTRL_UNKNOWN		0x40
-#define DOC_CTRL_FLASHREADY		0x01
-
-/* DOC_ECCCONF0 register bits */
-#define DOC_ECCCONF0_READ_MODE		0x8000
-#define DOC_ECCCONF0_UNKNOWN		0x2000
-#define DOC_ECCCONF0_ECC_ENABLE	        0x1000
-#define DOC_ECCCONF0_DATA_BYTES_MASK	0x07ff
-
-/* DOC_ECCCONF1 register bits */
-#define DOC_ECCCONF1_BCH_SYNDROM_ERR	0x80
-#define DOC_ECCCONF1_ECC_ENABLE         0x07
-#define DOC_ECCCONF1_PAGE_IS_WRITTEN	0x20
-
-/* DOC_ASICMODE register bits */
-#define DOC_ASICMODE_RESET		0x00
-#define DOC_ASICMODE_NORMAL		0x01
-#define DOC_ASICMODE_POWERDOWN		0x02
-#define DOC_ASICMODE_MDWREN		0x04
-#define DOC_ASICMODE_BDETCT_RESET	0x08
-#define DOC_ASICMODE_RSTIN_RESET	0x10
-#define DOC_ASICMODE_RAM_WE		0x20
-
-/* good status values read after read/write/erase operations */
-#define DOCG4_PROGSTATUS_GOOD          0x51
-#define DOCG4_PROGSTATUS_GOOD_2        0xe0
-
-/*
- * On read operations (page and oob-only), the first byte read from I/O reg is a
- * status.  On error, it reads 0x73; otherwise, it reads either 0x71 (first read
- * after reset only) or 0x51, so bit 1 is presumed to be an error indicator.
- */
-#define DOCG4_READ_ERROR           0x02 /* bit 1 indicates read error */
-
-/* anatomy of the device */
-#define DOCG4_CHIP_SIZE        0x8000000
-#define DOCG4_PAGE_SIZE        0x200
-#define DOCG4_PAGES_PER_BLOCK  0x200
-#define DOCG4_BLOCK_SIZE       (DOCG4_PAGES_PER_BLOCK * DOCG4_PAGE_SIZE)
-#define DOCG4_NUMBLOCKS        (DOCG4_CHIP_SIZE / DOCG4_BLOCK_SIZE)
-#define DOCG4_OOB_SIZE         0x10
-#define DOCG4_CHIP_SHIFT       27    /* log_2(DOCG4_CHIP_SIZE) */
-#define DOCG4_PAGE_SHIFT       9     /* log_2(DOCG4_PAGE_SIZE) */
-#define DOCG4_ERASE_SHIFT      18    /* log_2(DOCG4_BLOCK_SIZE) */
-
-/* all but the last byte is included in ecc calculation */
-#define DOCG4_BCH_SIZE         (DOCG4_PAGE_SIZE + DOCG4_OOB_SIZE - 1)
-
-#define DOCG4_USERDATA_LEN     520 /* 512 byte page plus 8 oob avail to user */
-
-/* expected values from the ID registers */
-#define DOCG4_IDREG1_VALUE     0x0400
-#define DOCG4_IDREG2_VALUE     0xfbff
-
-/* primitive polynomial used to build the Galois field used by hw ecc gen */
-#define DOCG4_PRIMITIVE_POLY   0x4443
-
-#define DOCG4_M                14  /* Galois field is of order 2^14 */
-#define DOCG4_T                4   /* BCH alg corrects up to 4 bit errors */
-
-#define DOCG4_FACTORY_BBT_PAGE 16 /* page where read-only factory bbt lives */
-
-#endif	/* __DOCG4_H__ */