Merge branch 'master' of git://git.denx.de/u-boot-spi

2 files changed, 83 insertions, 0 deletions

diff --git a/include/spi.h b/include/spi.h
index aba792244a..ffd66478b1 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -30,6 +30,24 @@
 #define SPI_XFER_MMAP		0x08	/* Memory Mapped start */
 #define SPI_XFER_MMAP_END	0x10	/* Memory Mapped End */
 #define SPI_XFER_ONCE		(SPI_XFER_BEGIN | SPI_XFER_END)
+#define SPI_XFER_U_PAGE		(1 << 5)
+
+/* SPI TX operation modes */
+#define SPI_OPM_TX_QPP		1 << 0
+
+/* SPI RX operation modes */
+#define SPI_OPM_RX_AS		1 << 0
+#define SPI_OPM_RX_DOUT		1 << 1
+#define SPI_OPM_RX_DIO		1 << 2
+#define SPI_OPM_RX_QOF		1 << 3
+#define SPI_OPM_RX_QIOF		1 << 4
+#define SPI_OPM_RX_EXTN		SPI_OPM_RX_AS | SPI_OPM_RX_DOUT | \
+				SPI_OPM_RX_DIO | SPI_OPM_RX_QOF | \
+				SPI_OPM_RX_QIOF
+
+/* SPI bus connection options */
+#define SPI_CONN_DUAL_SHARED	1 << 0
+#define SPI_CONN_DUAL_SEPARATED	1 << 1
 
 /* Header byte that marks the start of the message */
 #define SPI_PREAMBLE_END_BYTE	0xec
@@ -43,17 +61,25 @@
  *
  * @bus:		ID of the bus that the slave is attached to.
  * @cs:			ID of the chip select connected to the slave.
+ * @op_mode_rx:		SPI RX operation mode.
+ * @op_mode_tx:		SPI TX operation mode.
  * @wordlen:		Size of SPI word in number of bits
  * @max_write_size:	If non-zero, the maximum number of bytes which can
  *			be written at once, excluding command bytes.
  * @memory_map:		Address of read-only SPI flash access.
+ * @option:		Varies SPI bus options - separate, shared bus.
+ * @flags:		Indication of SPI flags.
  */
 struct spi_slave {
 	unsigned int bus;
 	unsigned int cs;
+	u8 op_mode_rx;
+	u8 op_mode_tx;
 	unsigned int wordlen;
 	unsigned int max_write_size;
 	void *memory_map;
+	u8 option;
+	u8 flags;
 };
 
 /**
diff --git a/include/spi_flash.h b/include/spi_flash.h
index afc3a5809e..f79f0eacca 100644
--- a/include/spi_flash.h
+++ b/include/spi_flash.h
@@ -19,11 +19,60 @@
 #include <linux/types.h>
 #include <linux/compiler.h>
 
+/* sf param flags */
+#define SECT_4K		1 << 1
+#define SECT_32K	1 << 2
+#define E_FSR		1 << 3
+#define WR_QPP		1 << 4
+
+/* Enum list - Full read commands */
+enum spi_read_cmds {
+	ARRAY_SLOW = 1 << 0,
+	DUAL_OUTPUT_FAST = 1 << 1,
+	DUAL_IO_FAST = 1 << 2,
+	QUAD_OUTPUT_FAST = 1 << 3,
+	QUAD_IO_FAST = 1 << 4,
+};
+#define RD_EXTN		ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST
+#define RD_FULL		RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST
+
+/* Dual SPI flash memories */
+enum spi_dual_flash {
+	SF_SINGLE_FLASH = 0,
+	SF_DUAL_STACKED_FLASH = 1 << 0,
+	SF_DUAL_PARALLEL_FLASH = 1 << 1,
+};
+
+/**
+ * struct spi_flash_params - SPI/QSPI flash device params structure
+ *
+ * @name:		Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
+ * @jedec:		Device jedec ID (0x[1byte_manuf_id][2byte_dev_id])
+ * @ext_jedec:		Device ext_jedec ID
+ * @sector_size:	Sector size of this device
+ * @nr_sectors:		No.of sectors on this device
+ * @e_rd_cmd:		Enum list for read commands
+ * @flags:		Importent param, for flash specific behaviour
+ */
+struct spi_flash_params {
+	const char *name;
+	u32 jedec;
+	u16 ext_jedec;
+	u32 sector_size;
+	u32 nr_sectors;
+	u8 e_rd_cmd;
+	u16 flags;
+};
+
+extern const struct spi_flash_params spi_flash_params_table[];
+
 /**
  * struct spi_flash - SPI flash structure
  *
  * @spi:		SPI slave
  * @name:		Name of SPI flash
+ * @dual_flash:		Indicates dual flash memories - dual stacked, parallel
+ * @shift:		Flash shift useful in dual parallel
  * @size:		Total flash size
  * @page_size:		Write (page) size
  * @sector_size:	Sector size
@@ -33,6 +82,9 @@
  * @bank_curr:		Current flash bank
  * @poll_cmd:		Poll cmd - for flash erase/program
  * @erase_cmd:		Erase cmd 4K, 32K, 64K
+ * @read_cmd:		Read cmd - Array Fast, Extn read and quad read.
+ * @write_cmd:		Write cmd - page and quad program.
+ * @dummy_byte:		Dummy cycles for read operation.
  * @memory_map:		Address of read-only SPI flash access
  * @read:		Flash read ops: Read len bytes at offset into buf
  *			Supported cmds: Fast Array Read
@@ -45,6 +97,8 @@
 struct spi_flash {
 	struct spi_slave *spi;
 	const char *name;
+	u8 dual_flash;
+	u8 shift;
 
 	u32 size;
 	u32 page_size;
@@ -57,6 +111,9 @@ struct spi_flash {
 #endif
 	u8 poll_cmd;
 	u8 erase_cmd;
+	u8 read_cmd;
+	u8 write_cmd;
+	u8 dummy_byte;
 
 	void *memory_map;
 	int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf);