Merge branch '2019-05-04-master-imports'

- Remove dead code from davinci
- Migrate CONFIG_SUPPORT_EMMC_BOOT

41 files changed, 0 insertions, 78 deletions

diff --git a/include/configs/advantech_dms-ba16.h b/include/configs/advantech_dms-ba16.h
index 57edeee941..22d1e41bc8 100644
--- a/include/configs/advantech_dms-ba16.h
+++ b/include/configs/advantech_dms-ba16.h
@@ -21,8 +21,6 @@
 #define CONFIG_LOADCMD "fatload"
 #define CONFIG_RFSPART "2"
 
-#define CONFIG_SUPPORT_EMMC_BOOT
-
 #include "mx6_common.h"
 #include <linux/sizes.h>
 
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index c14b010550..2c651aab17 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -63,8 +63,6 @@
 #define CONFIG_NET_RETRY_COUNT		10
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs longer aneg time at 1G */
 
-#define CONFIG_SUPPORT_EMMC_BOOT
-
 /* USB xHCI HOST */
 #define CONFIG_USB_XHCI_OMAP
 
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index 1d296ba51a..9c8c8979f0 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -18,9 +18,6 @@
 #define CONFIG_TEGRA_ENABLE_UARTA
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
 
-/* SD/MMC support */
-#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
-
 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 #define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE + \
 					 CONFIG_TDX_CFG_BLOCK_OFFSET)
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 91054d8c05..9d9e16e5d9 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -46,8 +46,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	3
 
-#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
-
 /*
  * SATA Configs
  */
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index 06b02ce90a..dd321c4748 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -14,9 +14,6 @@
 #include "exynos5250-common.h"
 #include <configs/exynos5-common.h>
 
-/* SD/MMC configuration */
-#define CONFIG_SUPPORT_EMMC_BOOT
-
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 84c801d10a..51af93a32f 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -31,11 +31,6 @@
 /*#define CONFIG_MACH_TYPE		3589*/
 #define CONFIG_MACH_TYPE		0xFFFFFFFF /* TODO: check with kernel*/
 
-/* MMC/SD IP block */
-#if defined(CONFIG_EMMC_BOOT)
- #define CONFIG_SUPPORT_EMMC_BOOT
-#endif /* CONFIG_EMMC_BOOT */
-
 /*
  * When we have NAND flash we expect to be making use of mtdparts,
  * both for ease of use in U-Boot and for passing information on to
diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h
index 26d1a97891..4c93fc6cbe 100644
--- a/include/configs/cl-som-imx7.h
+++ b/include/configs/cl-som-imx7.h
@@ -153,7 +153,6 @@
 
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_MMCROOT			"/dev/mmcblk0p2" /* USDHC1 */
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 #endif
 
 /* USB Configs */
diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index a00329db29..4198ff0511 100644
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -26,10 +26,6 @@
  */
 #define CONFIG_SYS_MMC_BASE		MVEBU_SDIO_BASE
 
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_SUPPORT_EMMC_BOOT
-#endif
-
 /* USB/EHCI configuration */
 #define CONFIG_EHCI_IS_TDI
 
diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
index cda1b5528f..2387f864e3 100644
--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@@ -41,7 +41,6 @@
 
 /* Enhance our eMMC support / experience. */
 #define CONFIG_HSMMC2_8BIT
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* SATA Boot related defines */
 #define CONFIG_SPL_SATA_BOOT_DEVICE		0
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 129a42466d..b540b3e074 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -44,8 +44,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 
-#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
-
 /* Network */
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE			ENET_BASE_ADDR
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 5a4b9801cb..7dfc92c085 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -35,8 +35,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM	1
 #elif CONFIG_TARGET_COLIBRI_IMX7_EMMC
 #define CONFIG_SYS_FSL_USDHC_NUM	2
-
-#define CONFIG_SUPPORT_EMMC_BOOT
 #endif
 
 #undef CONFIG_BOOTM_PLAN9
diff --git a/include/configs/display5.h b/include/configs/display5.h
index 8ab47abfa8..8829cbad91 100644
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -83,7 +83,6 @@
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	2
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index f6be6595fe..aec70ee718 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -96,8 +96,6 @@
 /* SPI SPL */
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000
 
-#define CONFIG_SUPPORT_EMMC_BOOT
-
 /* USB xHCI HOST */
 #define CONFIG_USB_XHCI_OMAP
 
diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h
index cf021083ae..7155ebac5c 100644
--- a/include/configs/dragonboard410c.h
+++ b/include/configs/dragonboard410c.h
@@ -31,13 +31,6 @@
  * it has to be done after each HCD reset */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
-/* Support all possible USB ethernet dongles */
-
-/* Extra Commands */
-/* Enable that for switching of boot partitions */
-/* Disabled by default as some sub-commands can brick eMMC */
-/*#define CONFIG_SUPPORT_EMMC_BOOT */
-
 /* BOOTP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
diff --git a/include/configs/edison.h b/include/configs/edison.h
index a6155ba5a8..218b50a1d9 100644
--- a/include/configs/edison.h
+++ b/include/configs/edison.h
@@ -34,7 +34,6 @@
 #define CONFIG_ENV_SIZE				(64 * 1024)
 #define CONFIG_ENV_OFFSET			(3 * 1024 * 1024)
 #define CONFIG_ENV_OFFSET_REDUND		(6 * 1024 * 1024)
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* RTC */
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS	0
diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
index 858bed012c..8bc7a3ad2e 100644
--- a/include/configs/embestmx6boards.h
+++ b/include/configs/embestmx6boards.h
@@ -76,7 +76,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM	3
 #define CONFIG_SYS_MMC_ENV_DEV		2	/* SDHC4 */
 #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 /* MarSBoard */
 #define CONFIG_FDTFILE	"imx6q-marsboard.dtb"
diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index db1fc934bb..397bbf6d9d 100644
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -44,7 +44,6 @@
 
 /* MMC SPL */
 #define COPY_BL2_FNPTR_ADDR	0x02020030
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* specific .lds file */
 
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index 196f114c60..0481ed06a9 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -19,9 +19,6 @@
 #define CONFIG_MXC_UART_BASE	UART3_BASE
 #define CONSOLE_DEV	"ttymxc2"
 
-#define CONFIG_SUPPORT_EMMC_BOOT
-
-
 #include "mx6_common.h"
 #include <linux/sizes.h>
 
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 93608e5aec..02ceb4c8fc 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -81,9 +81,6 @@
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-/* eMMC Configs */
-#define CONFIG_SUPPORT_EMMC_BOOT
-
 /*
  * SATA Configs
  */
diff --git a/include/configs/imx6dl-mamoj.h b/include/configs/imx6dl-mamoj.h
index 030dbedce8..7605e145c2 100644
--- a/include/configs/imx6dl-mamoj.h
+++ b/include/configs/imx6dl-mamoj.h
@@ -51,7 +51,6 @@
 
 /* MMC */
 #define CONFIG_SYS_MMC_ENV_DEV		2
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* Ethernet */
 #define CONFIG_FEC_MXC_PHYADDR		1
diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index aaecf6f053..7759bbf264 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -224,7 +224,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 
-#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
 
 #define CONFIG_MXC_GPIO
diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index 18ea5a8fb6..40163c8d50 100644
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -53,7 +53,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 #define USDHC1_BASE_ADDR                0x5B010000
 #define USDHC2_BASE_ADDR                0x5B020000
-#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
 
 #define CONFIG_ENV_OVERWRITE
 
diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h
index a97ccb50b2..975f32474c 100644
--- a/include/configs/liteboard.h
+++ b/include/configs/liteboard.h
@@ -24,7 +24,6 @@
 /* MMC Configs */
 #ifdef CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC1_BASE_ADDR
-#define CONFIG_SUPPORT_EMMC_BOOT
 #endif
 
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
diff --git a/include/configs/mt7623.h b/include/configs/mt7623.h
index e449364ad4..5f67893f31 100644
--- a/include/configs/mt7623.h
+++ b/include/configs/mt7623.h
@@ -42,7 +42,6 @@
 
 /* MMC */
 #define MMC_SUPPORTS_TUNING
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* DRAM */
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 555942a2c2..ec1537541a 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -16,8 +16,6 @@
 #define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONSOLE_DEV		"ttymxc0"
 
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
-
 #include "mx6sabre_common.h"
 
 /* Falcon Mode */
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 39d29de744..77856a8f3a 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -38,7 +38,6 @@
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED		100000
 
-#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
 
 #ifdef CONFIG_IMX_BOOTAUX
diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h
index b8dcaa1036..5bd6392973 100644
--- a/include/configs/mx7ulp_evk.h
+++ b/include/configs/mx7ulp_evk.h
@@ -28,7 +28,6 @@
 #define IOMUXC_BASE_ADDR		IOMUXC1_RBASE
 
 #define CONFIG_FSL_USDHC
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 
 #define CONFIG_SYS_FSL_USDHC_NUM        1
 
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 66bd288040..0d8f945349 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -39,7 +39,6 @@
 
 /* Enhance our eMMC support / experience. */
 #define CONFIG_HSMMC2_8BIT
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* Required support for the TCA642X GPIO we have on the uEVM */
 #define CONFIG_TCA642X
diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h
index 70cf4665df..e0c76ff43d 100644
--- a/include/configs/opos6uldev.h
+++ b/include/configs/opos6uldev.h
@@ -33,9 +33,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* MMC */
-#define CONFIG_SUPPORT_EMMC_BOOT
-
 /* USB */
 #ifdef CONFIG_USB_EHCI_MX6
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h
index 050f69801b..cd051bf263 100644
--- a/include/configs/pico-imx6ul.h
+++ b/include/configs/pico-imx6ul.h
@@ -41,7 +41,6 @@
 
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC1_BASE_ADDR
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* USB Configs */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h
index 04d316f113..365a5984e4 100644
--- a/include/configs/pico-imx7d.h
+++ b/include/configs/pico-imx7d.h
@@ -58,7 +58,6 @@
 	"bootmenu_1=Boot using PICO-Pi baseboard=" \
 		"setenv fdtfile imx7d-pico-pi.dtb\0" \
 
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h
index 3069373236..fd6c97a0c6 100644
--- a/include/configs/stm32mp1.h
+++ b/include/configs/stm32mp1.h
@@ -77,7 +77,6 @@
 
 /*MMC SD*/
 #define CONFIG_SYS_MMC_MAX_DEVICE	3
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /*****************************************************************************/
 #ifdef CONFIG_DISTRO_DEFAULTS
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 31a9c59ed5..bec7b68794 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -94,9 +94,6 @@
 #define CONFIG_SYS_NAND_DATA_BASE			0x68000000
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS			0
 
-/* SD/MMC */
-#define CONFIG_SUPPORT_EMMC_BOOT
-
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x01000000)
diff --git a/include/configs/vinco.h b/include/configs/vinco.h
index ec22a30cda..eebb3f7ca7 100644
--- a/include/configs/vinco.h
+++ b/include/configs/vinco.h
@@ -43,7 +43,6 @@
 /* MMC */
 
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_SUPPORT_EMMC_BOOT
 #define CONFIG_GENERIC_ATMEL_MCI
 #define ATMEL_BASE_MMCI			0xfc000000
 #define CONFIG_SYS_MMC_CLK_OD		500000
diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h
index d3cbdc6f2e..fd98c1417e 100644
--- a/include/configs/vining_2000.h
+++ b/include/configs/vining_2000.h
@@ -95,7 +95,6 @@
 #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
 
 #ifdef CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SUPPORT_EMMC_BOOT
 #define CONFIG_SYS_MMC_ENV_DEV		0 /* USDHC4 eMMC */
 /* 0=user, 1=boot0, 2=boot1, * 4..7=general0..3. */
 #define CONFIG_SYS_MMC_ENV_PART		1 /* boot0 */
diff --git a/include/configs/warp.h b/include/configs/warp.h
index 9aa8a48d3d..5345f5314d 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -23,7 +23,6 @@
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
 #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* Watchdog */
 #define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 /* 30s */
diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index 37649cf2c5..0ef8e35948 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -29,7 +29,6 @@
 
 /* MMC Config*/
 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC3_BASE_ADDR
-#define CONFIG_SUPPORT_EMMC_BOOT
 #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
 
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 37a9ae90e5..684faaee2e 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -47,10 +47,6 @@
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_MAY_FAIL
 
-#if defined(CONFIG_MMC_SDHCI_ZYNQ)
-# define CONFIG_SUPPORT_EMMC_BOOT
-#endif
-
 #ifdef CONFIG_NAND_ARASAN
 # define CONFIG_SYS_MAX_NAND_DEVICE	1
 # define CONFIG_SYS_NAND_ONFI_DETECTION
diff --git a/include/configs/xpress.h b/include/configs/xpress.h
index 08e0ca0c8f..4cbf8aa526 100644
--- a/include/configs/xpress.h
+++ b/include/configs/xpress.h
@@ -21,7 +21,6 @@
 
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
-#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
 
 /* I2C configs */
 #define CONFIG_SYS_I2C
diff --git a/include/configs/zc5202.h b/include/configs/zc5202.h
index 40d33f7830..77ff04754b 100644
--- a/include/configs/zc5202.h
+++ b/include/configs/zc5202.h
@@ -12,8 +12,6 @@
 #define CONSOLE_DEV		"ttymxc1"
 #define CONFIG_MMCROOT			"/dev/mmcblk0p2"
 
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
-
 #include "el6x_common.h"
 
 /* Ethernet */
diff --git a/include/configs/zc5601.h b/include/configs/zc5601.h
index b9673e2c06..e4fe7a462d 100644
--- a/include/configs/zc5601.h
+++ b/include/configs/zc5601.h
@@ -13,8 +13,6 @@
 #define CONSOLE_DEV		"ttymxc1"
 #define CONFIG_MMCROOT			"/dev/mmcblk0p1"
 
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
-
 #include "el6x_common.h"
 
 /* Ethernet */