NC650/CP850: remove code for yet another corpse

The NC650 / CP850 boards have long been unmaintained and left broken.
As obviously nobody is interested in that code any more, we may as
well remove it.

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 451 deletions

diff --git a/include/configs/NC650.h b/include/configs/NC650.h
deleted file mode 100644
index df1c1ca427..0000000000
--- a/include/configs/NC650.h
+++ /dev/null
@@ -1,451 +0,0 @@
-/*
- * (C) Copyright 2006, 2007 Detlev Zundel, dzu@denx.de
- * (C) Copyright 2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC852T		1
-#define CONFIG_NC650		1
-
-#define	CONFIG_SYS_TEXT_BASE	0x40700000
-
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-
-/*
- * 10 MHz - PLL input clock
- */
-#define CONFIG_8xx_OSCLK		10000000
-
-/*
- * 50 MHz - default CPU clock
- */
-#define CONFIG_8xx_CPUCLK_DEFAULT	50000000
-
-/*
- * 15 MHz - CPU minimum clock
- */
-#define CONFIG_SYS_8xx_CPUCLK_MIN		15000000
-
-/*
- * 133 MHz - CPU maximum clock
- */
-#define CONFIG_SYS_8xx_CPUCLK_MAX		133000000
-
-#define CONFIG_SYS_MEASURE_CPUCLK
-#define CONFIG_SYS_8XX_XIN			CONFIG_8xx_OSCLK
-
-#define CONFIG_BOOTDELAY		5	/* autoboot after 5 seconds	*/
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT		\
-	"\nEnter password - autoboot in %d seconds...\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"ids"
-#define CONFIG_BOOT_RETRY_TIME		900
-#define CONFIG_BOOT_RETRY_MIN		30
-
-#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND							\
-	"bootp;"								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"	\
-	"bootm"
-
-#define CONFIG_WATCHDOG			/* watchdog enabled		*/
-
-#undef	CONFIG_STATUS_LED		/* Status LED disabled		*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
-#define FEC_ENET
-#define CONFIG_MII
-#define CONFIG_SYS_DISCOVER_PHY	1
-
-
-/* enable I2C and select the hardware/software driver */
-#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* 100 kHz			*/
-#define CONFIG_SYS_I2C_SLAVE		0x7f
-
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#if defined(CONFIG_IDS852_REV1)
-
-#define SCL		0x1000		/* PA 3 */
-#define SDA		0x2000		/* PA 2 */
-
-#define __I2C_DIR	immr->im_ioport.iop_padir
-#define __I2C_DAT	immr->im_ioport.iop_padat
-#define __I2C_PAR	immr->im_ioport.iop_papar
-
-#elif defined(CONFIG_IDS852_REV2)
-
-#define SCL		0x0002		/* PB 30 */
-#define SDA		0x0001		/* PB 31 */
-
-#define __I2C_PAR	immr->im_cpm.cp_pbpar
-#define __I2C_DIR	immr->im_cpm.cp_pbdir
-#define __I2C_DAT	immr->im_cpm.cp_pbdat
-
-#endif
-
-#define	I2C_INIT	{ __I2C_PAR &= ~(SDA|SCL);	\
-			  __I2C_DIR |= (SDA|SCL);	}
-#define	I2C_READ	((__I2C_DAT & SDA) ? 1 : 0)
-#define	I2C_SDA(x)	{ if (x) __I2C_DAT |= SDA; else __I2C_DAT &= ~SDA; }
-#define	I2C_SCL(x)	{ if (x) __I2C_DAT |= SCL; else __I2C_DAT &= ~SCL; }
-#define	I2C_DELAY	{ udelay(5); }
-#define	I2C_ACTIVE	{ __I2C_DIR |= SDA; }
-#define	I2C_TRISTATE	{ __I2C_DIR &= ~SDA; }
-
-#define CONFIG_RTC_PCF8563
-#define CONFIG_SYS_I2C_RTC_ADDR		0x51
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x00100000
-
-#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xF0000000
-#define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0x40000000
-
-#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define	CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET		0x00740000
-
-#define CONFIG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment sector	*/
-#define	CONFIG_ENV_SIZE		0x4000	/* Used Size of Environment Sector	*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*
- * NAND flash support
- */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control					11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration					11-6
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control					11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF11
-#define CONFIG_SYS_SCCR	(SCCR_COM00	| SCCR_DFSYNC00	| \
-			 SCCR_DFBRG00	| SCCR_DFNL000	| SCCR_DFNH000	| \
-			 SCCR_DFLCD000	| SCCR_DFALCD00)
-
- /*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER		0
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
-
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
-
-/* FLASH timing: Default value of OR0 after reset */
-#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_MSK | OR_BI | \
-				 OR_SCY_15_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V)
-
-/*
- * BR2 and OR2 (NAND Flash) - addressed through UPMB on rev 1
- * rev2 only uses the chipselect
- */
-#define CONFIG_SYS_NAND_BASE		0x50000000
-#define CONFIG_SYS_NAND_SIZE		0x04000000
-
-#define CONFIG_SYS_OR_TIMING_NAND	(OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
-				 OR_SCY_15_CLK | OR_EHTR | OR_TRLX)
-
-#define CONFIG_SYS_BR2_PRELIM  ((CONFIG_SYS_NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_MS_UPMB | BR_V  )
-#define CONFIG_SYS_OR2_PRELIM  (((-CONFIG_SYS_NAND_SIZE) & OR_AM_MSK) | OR_BI )
-
-/*
- * BR3 and OR3 (SDRAM)
- */
-#define SDRAM_BASE3_PRELIM	0x00000000	/* SDRAM bank		*/
-#define SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
-
- /*
-  * SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)
-  */
-#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
-
-#define CONFIG_SYS_OR3_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM)
-#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V)
-
-/*
- * BR4 and OR4 (CPLD)
- */
-#define CONFIG_SYS_CPLD_BASE           0x80000000      /* CPLD                 */
-#define CONFIG_SYS_CPLD_SIZE           0x10000         /* only 16 used         */
-
-#define CONFIG_SYS_OR_TIMING_CPLD	(OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
-				 OR_SCY_1_CLK)
-
-#define CONFIG_SYS_BR4_PRELIM  ((CONFIG_SYS_CPLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
-#define CONFIG_SYS_OR4_PRELIM  (((-CONFIG_SYS_CPLD_SIZE) & OR_AM_MSK) | CONFIG_SYS_OR_TIMING_CPLD)
-
-/*
- * BR5 and OR5 (SRAM)
- */
-#define CONFIG_SYS_SRAM_BASE		0x60000000
-#define CONFIG_SYS_SRAM_SIZE		0x00080000
-
-#define CONFIG_SYS_OR_TIMING_SRAM	(OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
-				 OR_SCY_15_CLK | OR_EHTR | OR_TRLX)
-
-#define CONFIG_SYS_BR5_PRELIM  ((CONFIG_SYS_SRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
-#define CONFIG_SYS_OR5_PRELIM  (((-CONFIG_SYS_SRAM_SIZE) & OR_AM_MSK) | CONFIG_SYS_OR_TIMING_SRAM)
-
-#if defined(CONFIG_CP850)
-/*
- *  BR6 and OR6 (DPRAM) - only on CP850
- */
-#define CONFIG_SYS_OR6_PRELIM          0xffff8170
-#define CONFIG_SYS_BR6_PRELIM          0xa0000401
-#define DPRAM_BASE_ADDR         0xa0000000
-
-#define CONFIG_MISC_INIT_R      1
-#endif
-
-/*
- * 4096 Rows from SDRAM example configuration
- * 1000 factor s -> ms
- * 64   PTP (pre-divider from MPTPR) from SDRAM example configuration
- * 4    Number of refresh cycles per period
- * 64   Refresh cycle in ms per number of rows
- */
-#define CONFIG_SYS_PTA_PER_CLK		((4096 * 64 * 1000) / (4 * 64))
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA		39
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
-
-/*
- * MAMR settings for SDRAM
- */
-
-#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE | \
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
-			 MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
-#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE | \
-			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
-			 MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
-
-/*
- * MBMR settings for NAND flash
- */
-
-#define CONFIG_SYS_MBMR_NAND ( MBMR_WLFB_5X )
-
-#define CONFIG_JFFS2_NAND 1			/* jffs2 on nand support */
-#define NAND_CACHE_PAGES 16			/* size of nand cache in 512 bytes pages */
-
-/*
- * JFFS2 partitions
- */
-
-/* No command line, one static partition */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nand0"
-#define CONFIG_JFFS2_PART_SIZE		0x00400000
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-
-/* mtdparts command line support */
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"nor0=nc650-0,nand0=nc650-nand"
-
-#define MTDPARTS_DEFAULT	"mtdparts=nc650-0:1m(kernel1),1m(kernel2)," \
-					"4m(cramfs1),1m(cramfs2)," \
-					"256k(u-boot),128k(env);" \
-				"nc650-nand:4m(jffs1),28m(jffs2)"
-
-#endif	/* __CONFIG_H */