marvell: kirkwood: guruplug refresh for newer kernel

Refresh for newer kernel.
Prepare ENV settings for sheevaplugs to be OpenWRT ready.

    +----------+
    | UBOOT    | >> 896 Kb (7x128)  = uboot
    +----------+
    | ENV      | >> 128 Kb          = uboot_env
    +----------+
    | ROOT(FS) | >> 511 Mb @ 1 Mb   = root -> rootfs (ubifs)
    +----------+

With (CC) TRUNK OpenWRT build (QUICK HOWTO) :

    <INTERRUPT>
    Marvell>> nand erase.part root
    Marvell>> ubi part root
    Marvell>> ubi remove rootfs
    Marvell>> ubi create rootfs
    Marvell>> usb reset
    Marvell>> fatload usb 2:1 0x800000 guruplug/openwrt/openwrt-kirkwood-guruplug-rootfs.ubifs
    Marvell>> ubi write 0x800000 rootfs ${filesize}
    Marvell>> reset

Changes in v1:
- ADD generic board define
- ADD FDT support
- ADD HUSH interpreter
- Define new NAND partition mapping

Signed-off-by: Gerald Kerma <dreagle@doukki.net>

1 files changed, 67 insertions, 17 deletions

diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h
index a56a4cb982..8e53af8c04 100644
--- a/include/configs/guruplug.h
+++ b/include/configs/guruplug.h
@@ -1,5 +1,6 @@
 /*
- * (C) Copyright 2009
+ * (C) Copyright 2009-2014
+ * Gerald Kerma <dreagle@doukki.net>
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Siddarth Gore <gores@marvell.com>
  *
@@ -9,6 +10,8 @@
 #ifndef _CONFIG_GURUPLUG_H
 #define _CONFIG_GURUPLUG_H
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /*
  * Version number information
  */
@@ -23,17 +26,36 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
 
 /*
+ * Compression configuration
+ */
+#define CONFIG_BZIP2
+#define CONFIG_LZMA
+#define CONFIG_LZO
+
+/*
+ * Enable device tree support
+ */
+#define CONFIG_OF_LIBFDT
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+
+/*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
 #include <config_cmd_default.h>
+#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
-#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
 
 /*
  * mv-common.h should be defined after CMD configs since it used them
@@ -55,24 +77,38 @@
  * it has to be rounded to sector size
  */
 #define CONFIG_ENV_SIZE			0x20000	/* 128k */
-#define CONFIG_ENV_ADDR			0x60000
-#define CONFIG_ENV_OFFSET		0x60000	/* env starts here */
+#define CONFIG_ENV_OFFSET		0xE0000	/* env starts here */
 
 /*
  * Default environment variables
  */
-#define CONFIG_BOOTCOMMAND		"setenv ethact egiga0; " \
-	"${x_bootcmd_ethernet}; setenv ethact egiga1; " \
-	"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
-	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
-	"bootm 0x6400000;"
-
-#define CONFIG_EXTRA_ENV_SETTINGS	\
-	"x_bootcmd_ethernet=ping 192.168.2.1\0"	\
-	"x_bootcmd_usb=usb start\0"	\
-	"x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \
-	"x_bootargs=console=ttyS0,115200\0"	\
-	"x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
+#define CONFIG_BOOTCOMMAND \
+	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; "	\
+	"ubi part root; "						\
+	"ubifsmount ubi:rootfs; "					\
+	"ubifsload 0x800000 ${kernel}; "				\
+	"ubifsload 0x700000 ${fdt}; "					\
+	"ubifsumount; "							\
+	"fdt addr 0x700000; fdt resize; fdt chosen; "			\
+	"bootz 0x800000 - 0x700000"
+
+#define CONFIG_MTDPARTS	\
+	"mtdparts=orion_nand:"						\
+	"896K(uboot),128K(uboot_env),"					\
+	"-@1M(root)\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"console=console=ttyS0,115200\0"				\
+	"mtdids=nand0=orion_nand\0"					\
+	"mtdparts="CONFIG_MTDPARTS					\
+	"kernel=/boot/zImage\0"						\
+	"fdt=/boot/guruplug-server-plus.dtb\0"				\
+	"bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
+
+#define MTDIDS_DEFAULT	"nand0=orion_nand"
+
+#define MTDPARTS_DEFAULT	\
+	"mtdparts="CONFIG_MTDPARTS
 
 /*
  * Ethernet Driver configuration
@@ -89,6 +125,20 @@
 #define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
 #endif /*CONFIG_MVSATA_IDE*/
 
+/*
+ * File system
+ */
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+
 #define CONFIG_SYS_ALT_MEMTEST
 
 #endif /* _CONFIG_GURUPLUG_H */