PCU_E: remove code for yet another corpse

The PCU_E board has long reached EOL, and support for it is no longer
relevant in current versions of U-Boot.  Remove it.

Signed-off-by: Wolfgang Denk <wd@denx.de>

3 files changed, 6 insertions, 556 deletions

diff --git a/include/commproc.h b/include/commproc.h
index 762238ebec..2063761999 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -580,11 +580,11 @@ typedef struct scc_enet {
 /*********************************************************************/
 
 
-/***  CCM  and  PCU E  ***********************************************/
+/***  CCM  ***********************************************************/
 
-/* The PCU E  and  CCM  use the FEC on a MPC860T for Ethernet */
+/* The CCM  uses the FEC on a MPC860T for Ethernet */
 
-#if defined (CONFIG_PCU_E) || defined(CONFIG_CCM)
+#if defined(CONFIG_CCM)
 
 #define	FEC_ENET	/* use FEC for EThernet */
 #undef	SCC_ENET
@@ -605,7 +605,7 @@ typedef struct scc_enet {
 
 #define PD_MII_MASK	((ushort)0x1FFF)	/* PD 3...15 */
 
-#endif	/* CONFIG_PCU_E, CONFIG_CCM */
+#endif	/* CONFIG_CCM */
 
 /***  ELPT860 *********************************************************/
 
diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h
deleted file mode 100644
index 3aee206ad7..0000000000
--- a/include/configs/pcu_e.h
+++ /dev/null
@@ -1,550 +0,0 @@
-/*
- * (C) Copyright 2001-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Workaround for layout bug on prototype board
- */
-#define	PCU_E_WITH_SWAPPED_CS	1
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC860		1	/* This is a MPC860T CPU	*/
-#define CONFIG_MPC860T		1
-#define CONFIG_PCU_E		1	/* ...on a PCU E board		*/
-
-#define CONFIG_MISC_INIT_R	1	/* Call misc_init_r()		*/
-#define CONFIG_RESET_PHY_R	1	/* Call reset_phy()		*/
-
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-
-#define CONFIG_BAUDRATE		9600
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND							\
-	"bootp;"								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"	\
-	"bootm"
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-#define	CONFIG_STATUS_LED	1	/* Status LED enabled		*/
-
-#define	CONFIG_PRAM		2048	/* reserve 2 MB "protected RAM"	*/
-
-#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
-
-#define	CONFIG_SPI			/* enable SPI driver		*/
-#define	CONFIG_SPI_X			/* 16 bit EEPROM addressing	*/
-
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-
-/* ----------------------------------------------------------------
- * Offset to initial SPI buffers in DPRAM (used if the environment
- * is in the SPI EEPROM): We need a 520 byte scratch DPRAM area to
- * use at an early stage. It is used between the two initialization
- * calls (spi_init_f() and spi_init_r()). The value 0xB00 makes it
- * far enough from the start of the data area (as well as from the
- * stack pointer).
- * ---------------------------------------------------------------- */
-#define CONFIG_SYS_SPI_INIT_OFFSET		0xB00
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x00F00000	/* 1 ... 15MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address	*/
-
-#define	CONFIG_SYS_PIO_MODE		0	/* IDE interface in PIO Mode 0	*/
-
-/* Ethernet hardware configuration done using port pins */
-#define CONFIG_SYS_PB_ETH_RESET	0x00000020		/* PB 26	*/
-#if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CONFIG_SYS_PA_ETH_MDDIS	0x4000			/* PA  1	*/
-#define CONFIG_SYS_PB_ETH_POWERDOWN	0x00000800		/* PB 20	*/
-#define CONFIG_SYS_PB_ETH_CFG1		0x00000400		/* PB 21	*/
-#define CONFIG_SYS_PB_ETH_CFG2		0x00000200		/* PB 22	*/
-#define CONFIG_SYS_PB_ETH_CFG3		0x00000100		/* PB 23	*/
-#else /* XXX */
-#define CONFIG_SYS_PB_ETH_MDDIS	0x00000010		/* PB 27	*/
-#define CONFIG_SYS_PB_ETH_POWERDOWN	0x00000100		/* PB 23	*/
-#define CONFIG_SYS_PB_ETH_CFG1		0x00000200		/* PB 22	*/
-#define CONFIG_SYS_PB_ETH_CFG2		0x00000400		/* PB 21	*/
-#define CONFIG_SYS_PB_ETH_CFG3		0x00000800		/* PB 20	*/
-#endif /* XXX */
-
-/* Ethernet settings:
- * MDIO enabled, autonegotiation, 10/100Mbps, half/full duplex
- */
-#define CONFIG_SYS_ETH_MDDIS_VALUE	0
-#define CONFIG_SYS_ETH_CFG1_VALUE	1
-#define CONFIG_SYS_ETH_CFG2_VALUE	1
-#define CONFIG_SYS_ETH_CFG3_VALUE	1
-
-/* PUMA configuration */
-#if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CONFIG_SYS_PB_PUMA_PROG	0x00000010		/* PB 27	*/
-#else /* XXX */
-#define CONFIG_SYS_PA_PUMA_PROG	0x4000			/* PA  1	*/
-#endif /* XXX */
-#define CONFIG_SYS_PC_PUMA_DONE	0x0008			/* PC 12	*/
-#define CONFIG_SYS_PC_PUMA_INIT	0x0004			/* PC 13	*/
-
-#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFE000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
-#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Address accessed to reset the board - must not be mapped/assigned
- */
-#define	CONFIG_SYS_RESET_ADDRESS	0xFEFFFFFF
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-/* this is an ugly hack needed because of the silly non-constant address map */
-#define CONFIG_SYS_FLASH_BASE		(0-flash_info[0].size-flash_info[1].size)
-
-#if defined(DEBUG)
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	160	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	180000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
-
-#if 0
-/* Start port with environment in flash; switch to SPI EEPROM later */
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment		*/
-#define CONFIG_ENV_ADDR	    0xFFFFE000	/* Address    of Environment Sector	*/
-#define CONFIG_ENV_SECT_SIZE	0x2000	/* use the top-most 8k boot sector	*/
-#else
-/* Final version: environment in EEPROM */
-#define CONFIG_ENV_IS_IN_EEPROM	1
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-#define CONFIG_ENV_OFFSET		1024
-#define CONFIG_ENV_SIZE		1024
-#endif
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#define CONFIG_SYS_DELAYED_ICACHE	1	/* enable ICache not before
-						 * running in RAM.
-						 */
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * External Arbitration max. priority (7),
- * Debug pins configuration '11',
- * Asynchronous external master enable.
- */
-/* => 0x70600200 */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_EARP7 | SIUMCR_DBGC11 | SIUMCR_AEME)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit, set PLL multiplication factor !
- */
-/* 0x00004080 */
-#define	CONFIG_SYS_PLPRCR_MF	0	/* (0+1) * 50 = 50 MHz Clock */
-#define CONFIG_SYS_PLPRCR							\
-		(	(CONFIG_SYS_PLPRCR_MF << PLPRCR_MF_SHIFT) |		\
-			PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST |	\
-			/*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL |		\
-			PLPRCR_CSR    /*| PLPRCR_LOLRE|PLPRCR_FIOPD*/	\
-		)
-
-#define	CONFIG_8xx_GCLK_FREQ	((CONFIG_SYS_PLPRCR_MF+1)*50000000)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- *
- * Note: PITRTCLK is 50MHz / 512 = 97'656.25 Hz
- */
-#define SCCR_MASK	SCCR_EBDF11
-/* 0x01800000 */
-#define CONFIG_SYS_SCCR	(SCCR_COM00	| /*SCCR_TBS|*/		\
-			 SCCR_RTDIV	|   SCCR_RTSEL	  |	\
-			 /*SCCR_CRQEN|*/  /*SCCR_PRQEN|*/	\
-			 SCCR_EBDF00 |   SCCR_DFSYNC00 |	\
-			 SCCR_DFBRG00	|   SCCR_DFNL000  |	\
-			 SCCR_DFNH000	|   SCCR_DFLCD100 |	\
-			 SCCR_DFALCD01)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- *
- * Note: RTC counts at PITRTCLK / 8'192 = 11.920928 Hz !!!
- *
- * Don't expect the "date" command to work without a 32kHz clock input!
- */
-/* 0x00C3 => 0x0003 */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration Register		19-4
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR 0x0000
-
-/*-----------------------------------------------------------------------
- * RMDS - RISC Microcode Development Support Control Register
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RMDS 0
-
-/*-----------------------------------------------------------------------
- *
- * Interrupt Levels
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_CPM_INTERRUPT	13	/* SIU_LEVEL6	*/
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER	0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH) - second Flash bank optional
- */
-
-#define FLASH_BASE0_PRELIM	0xFF800000	/* FLASH bank #0	*/
-#if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define FLASH_BASE6_PRELIM	0xFF000000	/* FLASH bank #1	*/
-#else /* XXX */
-#define FLASH_BASE1_PRELIM	0xFF000000	/* FLASH bank #1	*/
-#endif /* XXX */
-
-/*
- * used to re-map FLASH: restrict access enough but not too much to
- * meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM		0xFF800000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xFF800000	/* OR addr mask */
-
-/* FLASH timing: CSNT = 0, ACS = 00, SCY = 8, EHTR = 1			*/
-#define CONFIG_SYS_OR_TIMING_FLASH	(OR_SCY_8_CLK | OR_EHTR)
-
-#define CONFIG_SYS_OR0_REMAP	( CONFIG_SYS_REMAP_OR_AM | OR_ACS_DIV1 | OR_BI | \
-				CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | OR_ACS_DIV1 | OR_BI | \
-				CONFIG_SYS_OR_TIMING_FLASH)
-/* 16 bit, bank valid */
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
-
-#if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CONFIG_SYS_OR6_REMAP	CONFIG_SYS_OR0_REMAP
-#define CONFIG_SYS_OR6_PRELIM	CONFIG_SYS_OR0_PRELIM
-#define CONFIG_SYS_BR6_PRELIM	((FLASH_BASE6_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
-#else /* XXX */
-#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
-#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
-#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V )
-#endif /* XXX */
-
-/*
- * BR2/OR2: SDRAM
- *
- * Multiplexed addresses, GPL5 output to GPL5_A (don't care)
- */
-#if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define SDRAM_BASE5_PRELIM	0x00000000	/* SDRAM bank */
-#else /* XXX */
-#define SDRAM_BASE2_PRELIM	0x00000000	/* SDRAM bank */
-#endif /* XXX */
-#define SDRAM_PRELIM_OR_AM	0xF8000000	/* map 128 MB (>SDRAM_MAX_SIZE!) */
-#define SDRAM_TIMING		OR_CSNT_SAM	/* SDRAM-Timing */
-
-#define SDRAM_MAX_SIZE		0x04000000	/* max 64 MB SDRAM */
-
-#if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CONFIG_SYS_OR5_PRELIM	(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
-#define CONFIG_SYS_BR5_PRELIM	((SDRAM_BASE5_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-#else /* XXX */
-#define CONFIG_SYS_OR2_PRELIM	(SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
-#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-#endif /* XXX */
-
-/*
- * BR3/OR3: CAN Controller
- *	BR3: 0x10000401		OR3: 0xffff818a
- */
-#define CAN_CTRLR_BASE		0x10000000	/* CAN Controller */
-#define CAN_CTRLR_OR_AM		0xFFFF8000	/* 32 kB */
-#define CAN_CTRLR_TIMING	(OR_BI | OR_SCY_8_CLK | OR_SETA | OR_EHTR)
-
-#if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CONFIG_SYS_BR4_PRELIM		((CAN_CTRLR_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-#define CONFIG_SYS_OR4_PRELIM		(CAN_CTRLR_OR_AM | CAN_CTRLR_TIMING)
-#else /* XXX */
-#define CONFIG_SYS_BR3_PRELIM		((CAN_CTRLR_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-#define CONFIG_SYS_OR3_PRELIM		(CAN_CTRLR_OR_AM | CAN_CTRLR_TIMING)
-#endif /* XXX */
-
-/*
- * BR4/OR4: PUMA Config
- *
- * Memory controller will be used in 2 modes:
- *
- * - "read" mode:
- *	BR4: 0x10100801		OR4: 0xffff8530
- * - "load" mode (chip select on UPM B):
- *	BR4: 0x101008c1		OR4: 0xffff8630
- *
- * Default initialization is in "read" mode
- */
-#define PUMA_CONF_BASE		0x10100000	/* PUMA Config */
-#define PUMA_CONF_OR_AM		0xFFFF8000	/* 32 kB */
-#define	PUMA_CONF_LOAD_TIMING	(OR_ACS_DIV2	 | OR_SCY_3_CLK)
-#define PUMA_CONF_READ_TIMING	(OR_G5LA | OR_BI | OR_SCY_3_CLK)
-
-#define PUMA_CONF_BR_LOAD	((PUMA_CONF_BASE & BR_BA_MSK) | \
-					BR_PS_16 | BR_MS_UPMB | BR_V)
-#define PUMA_CONF_OR_LOAD	(PUMA_CONF_OR_AM | PUMA_CONF_LOAD_TIMING)
-
-#define PUMA_CONF_BR_READ	((PUMA_CONF_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
-#define PUMA_CONF_OR_READ	(PUMA_CONF_OR_AM | PUMA_CONF_READ_TIMING)
-
-#if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CONFIG_SYS_BR3_PRELIM		PUMA_CONF_BR_READ
-#define CONFIG_SYS_OR3_PRELIM		PUMA_CONF_OR_READ
-#else /* XXX */
-#define CONFIG_SYS_BR4_PRELIM		PUMA_CONF_BR_READ
-#define CONFIG_SYS_OR4_PRELIM		PUMA_CONF_OR_READ
-#endif /* XXX */
-
-/*
- * BR5/OR5: PUMA: SMA Bus 8 Bit
- *	BR5: 0x10200401		OR5: 0xffe0010a
- */
-#define PUMA_SMA8_BASE		0x10200000	/* PUMA SMA Bus 8 Bit */
-#define PUMA_SMA8_OR_AM		0xFFE00000	/* 2 MB */
-#define PUMA_SMA8_TIMING	(OR_BI | OR_SCY_0_CLK | OR_EHTR)
-
-#if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CONFIG_SYS_BR2_PRELIM		((PUMA_SMA8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-#define CONFIG_SYS_OR2_PRELIM		(PUMA_SMA8_OR_AM | PUMA_SMA8_TIMING | OR_SETA)
-#else /* XXX */
-#define CONFIG_SYS_BR5_PRELIM		((PUMA_SMA8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
-#define CONFIG_SYS_OR5_PRELIM		(PUMA_SMA8_OR_AM | PUMA_SMA8_TIMING | OR_SETA)
-#endif /* XXX */
-
-/*
- * BR6/OR6: PUMA: SMA Bus 16 Bit
- *	BR6: 0x10600801		OR6: 0xffe0010a
- */
-#define PUMA_SMA16_BASE		0x10600000	/* PUMA SMA Bus 16 Bit */
-#define PUMA_SMA16_OR_AM	0xFFE00000	/* 2 MB */
-#define PUMA_SMA16_TIMING	(OR_BI | OR_SCY_0_CLK | OR_EHTR)
-
-#if PCU_E_WITH_SWAPPED_CS /* XXX */
-#define CONFIG_SYS_BR1_PRELIM		((PUMA_SMA16_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
-#define CONFIG_SYS_OR1_PRELIM		(PUMA_SMA16_OR_AM | PUMA_SMA16_TIMING | OR_SETA)
-#else /* XXX */
-#define CONFIG_SYS_BR6_PRELIM		((PUMA_SMA16_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
-#define CONFIG_SYS_OR6_PRELIM		(PUMA_SMA16_OR_AM | PUMA_SMA16_TIMING | OR_SETA)
-#endif /* XXX */
-
-/*
- * BR7/OR7: PUMA: external Flash
- *	BR7: 0x10a00801		OR7: 0xfe00010a
- */
-#define PUMA_FLASH_BASE		0x10A00000	/* PUMA external Flash */
-#define PUMA_FLASH_OR_AM	0xFE000000	/* 32 MB */
-#define PUMA_FLASH_TIMING	(OR_BI | OR_SCY_0_CLK | OR_EHTR)
-
-#define CONFIG_SYS_BR7_PRELIM		((PUMA_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_V)
-#define CONFIG_SYS_OR7_PRELIM		(PUMA_FLASH_OR_AM | PUMA_FLASH_TIMING | OR_SETA)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MPTPR	0x0200
-
-/*
- * MAMR settings for SDRAM
- * 0x30104118 = Timer A period 0x30, MAMR_AMB_TYPE_1, MAMR_G0CLB_A10,
- *		MAMR_RLFB_1X, MAMR_WLFB_1X, MAMR_TLFB_8X
- * 0x30904114 = - " - | Periodic Timer A Enable, MAMR_TLFB_4X
- */
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA	0x30	/* = 48 */
-
-#define CONFIG_SYS_MAMR	( (CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | \
-			  MAMR_AMA_TYPE_1	| \
-			  MAMR_G0CLA_A10	| \
-			  MAMR_RLFA_1X		| \
-			  MAMR_WLFA_1X		| \
-			  MAMR_TLFA_8X		)
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-#endif	/* __CONFIG_H */
diff --git a/include/status_led.h b/include/status_led.h
index b39ca64577..45fdc66758 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -190,8 +190,8 @@ void status_led_set  (int led, int state);
 
 # define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
 
-/*****  PCU E  and  CCM  ************************************************/
-#elif (defined(CONFIG_PCU_E) || defined(CONFIG_CCM))
+/*****  CCM  ************************************************************/
+#elif defined(CONFIG_CCM)
 
 # define STATUS_LED_PAR		im_cpm.cp_pbpar
 # define STATUS_LED_DIR		im_cpm.cp_pbdir