Merge branch 'master' of git://git.denx.de/u-boot-spi

This is the PR for SPI-NAND changes along with few spi changes.

[trini: Re-sync changes for ls1012afrwy_qspi*_defconfig]
Signed-off-by: Tom Rini <trini@konsulko.com>

9 files changed, 1536 insertions, 25 deletions

diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 884dd4125e..5b5c38f2c9 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -240,7 +240,7 @@
 				/* LB refresh timer prescal, 266MHz/32 */
 #define CONFIG_SYS_LBC_MRTPR	0x20000000  /*TODO */
 
-/* drivers/mtd/nand/nand.c */
+/* drivers/mtd/nand/raw/nand.c */
 #if defined(CONFIG_NAND) && defined(CONFIG_SPL_BUILD)
 #define CONFIG_SYS_NAND_BASE		0xFFF00000
 #else
diff --git a/include/jffs2/load_kernel.h b/include/jffs2/load_kernel.h
index 1ddff062ad..9346d7ee9f 100644
--- a/include/jffs2/load_kernel.h
+++ b/include/jffs2/load_kernel.h
@@ -15,9 +15,12 @@
 #define MTD_DEV_TYPE_NOR	0x0001
 #define MTD_DEV_TYPE_NAND	0x0002
 #define MTD_DEV_TYPE_ONENAND	0x0004
+#define MTD_DEV_TYPE_SPINAND	0x0008
 
-#define MTD_DEV_TYPE(type) ((type == MTD_DEV_TYPE_NAND) ? "nand" :	\
-			(type == MTD_DEV_TYPE_ONENAND) ? "onenand" : "nor")
+#define MTD_DEV_TYPE(type) (type == MTD_DEV_TYPE_NAND ? "nand" :	\
+			    (type == MTD_DEV_TYPE_NOR ? "nor" :		\
+			     (type == MTD_DEV_TYPE_ONENAND ? "onenand" : \
+			      "spi-nand")))				\
 
 struct mtd_device {
 	struct list_head link;
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 823e535b82..68e5915324 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -20,7 +20,11 @@
 #include <linux/compat.h>
 #include <mtd/mtd-abi.h>
 #include <linux/errno.h>
+#include <linux/list.h>
 #include <div64.h>
+#if IS_ENABLED(CONFIG_DM)
+#include <dm/device.h>
+#endif
 
 #define MAX_MTD_DEVICES 32
 #endif
@@ -304,8 +308,64 @@ struct mtd_info {
 	struct udevice *dev;
 #endif
 	int usecount;
+
+	/* MTD devices do not have any parent. MTD partitions do. */
+	struct mtd_info *parent;
+
+	/*
+	 * Offset of the partition relatively to the parent offset.
+	 * Is 0 for real MTD devices (ie. not partitions).
+	 */
+	u64 offset;
+
+	/*
+	 * List node used to add an MTD partition to the parent
+	 * partition list.
+	 */
+	struct list_head node;
+
+	/*
+	 * List of partitions attached to this MTD device (the parent
+	 * MTD device can itself be a partition).
+	 */
+	struct list_head partitions;
 };
 
+#if IS_ENABLED(CONFIG_DM)
+static inline void mtd_set_of_node(struct mtd_info *mtd,
+				   const struct device_node *np)
+{
+	mtd->dev->node.np = np;
+}
+
+static inline const struct device_node *mtd_get_of_node(struct mtd_info *mtd)
+{
+	return mtd->dev->node.np;
+}
+#else
+struct device_node;
+
+static inline void mtd_set_of_node(struct mtd_info *mtd,
+				   const struct device_node *np)
+{
+}
+
+static inline const struct device_node *mtd_get_of_node(struct mtd_info *mtd)
+{
+	return NULL;
+}
+#endif
+
+static inline bool mtd_is_partition(const struct mtd_info *mtd)
+{
+	return mtd->parent;
+}
+
+static inline bool mtd_has_partitions(const struct mtd_info *mtd)
+{
+	return !list_empty(&mtd->partitions);
+}
+
 int mtd_ooblayout_ecc(struct mtd_info *mtd, int section,
 		      struct mtd_oob_region *oobecc);
 int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte,
@@ -351,17 +411,7 @@ int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
 		    const u_char *buf);
 
 int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops);
-
-static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to,
-				struct mtd_oob_ops *ops)
-{
-	ops->retlen = ops->oobretlen = 0;
-	if (!mtd->_write_oob)
-		return -EOPNOTSUPP;
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-	return mtd->_write_oob(mtd, to, ops);
-}
+int mtd_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops);
 
 int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
 			   struct otp_info *buf);
@@ -515,6 +565,12 @@ int del_mtd_device(struct mtd_info *mtd);
 int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
 int del_mtd_partitions(struct mtd_info *);
 
+struct mtd_info *__mtd_next_device(int i);
+#define mtd_for_each_device(mtd)			\
+	for ((mtd) = __mtd_next_device(0);		\
+	     (mtd) != NULL;				\
+	     (mtd) = __mtd_next_device(mtd->index + 1))
+
 int mtd_arg_off(const char *arg, int *idx, loff_t *off, loff_t *size,
 		loff_t *maxsize, int devtype, uint64_t chipsize);
 int mtd_arg_off_size(int argc, char *const argv[], int *idx, loff_t *off,
@@ -525,5 +581,10 @@ int mtd_arg_off_size(int argc, char *const argv[], int *idx, loff_t *off,
 void mtd_get_len_incl_bad(struct mtd_info *mtd, uint64_t offset,
 			  const uint64_t length, uint64_t *len_incl_bad,
 			  int *truncated);
+
+/* drivers/mtd/mtd_uboot.c */
+int mtd_search_alternate_name(const char *mtdname, char *altname,
+			      unsigned int max_len);
+
 #endif
 #endif /* __MTD_MTD_H__ */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
new file mode 100644
index 0000000000..13e8dd1103
--- /dev/null
+++ b/include/linux/mtd/nand.h
@@ -0,0 +1,734 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright 2017 - Free Electrons
+ *
+ *  Authors:
+ *	Boris Brezillon <boris.brezillon@free-electrons.com>
+ *	Peter Pan <peterpandong@micron.com>
+ */
+
+#ifndef __LINUX_MTD_NAND_H
+#define __LINUX_MTD_NAND_H
+
+#include <linux/mtd/mtd.h>
+
+/**
+ * struct nand_memory_organization - Memory organization structure
+ * @bits_per_cell: number of bits per NAND cell
+ * @pagesize: page size
+ * @oobsize: OOB area size
+ * @pages_per_eraseblock: number of pages per eraseblock
+ * @eraseblocks_per_lun: number of eraseblocks per LUN (Logical Unit Number)
+ * @planes_per_lun: number of planes per LUN
+ * @luns_per_target: number of LUN per target (target is a synonym for die)
+ * @ntargets: total number of targets exposed by the NAND device
+ */
+struct nand_memory_organization {
+	unsigned int bits_per_cell;
+	unsigned int pagesize;
+	unsigned int oobsize;
+	unsigned int pages_per_eraseblock;
+	unsigned int eraseblocks_per_lun;
+	unsigned int planes_per_lun;
+	unsigned int luns_per_target;
+	unsigned int ntargets;
+};
+
+#define NAND_MEMORG(bpc, ps, os, ppe, epl, ppl, lpt, nt)	\
+	{							\
+		.bits_per_cell = (bpc),				\
+		.pagesize = (ps),				\
+		.oobsize = (os),				\
+		.pages_per_eraseblock = (ppe),			\
+		.eraseblocks_per_lun = (epl),			\
+		.planes_per_lun = (ppl),			\
+		.luns_per_target = (lpt),			\
+		.ntargets = (nt),				\
+	}
+
+/**
+ * struct nand_row_converter - Information needed to convert an absolute offset
+ *			       into a row address
+ * @lun_addr_shift: position of the LUN identifier in the row address
+ * @eraseblock_addr_shift: position of the eraseblock identifier in the row
+ *			   address
+ */
+struct nand_row_converter {
+	unsigned int lun_addr_shift;
+	unsigned int eraseblock_addr_shift;
+};
+
+/**
+ * struct nand_pos - NAND position object
+ * @target: the NAND target/die
+ * @lun: the LUN identifier
+ * @plane: the plane within the LUN
+ * @eraseblock: the eraseblock within the LUN
+ * @page: the page within the LUN
+ *
+ * These information are usually used by specific sub-layers to select the
+ * appropriate target/die and generate a row address to pass to the device.
+ */
+struct nand_pos {
+	unsigned int target;
+	unsigned int lun;
+	unsigned int plane;
+	unsigned int eraseblock;
+	unsigned int page;
+};
+
+/**
+ * struct nand_page_io_req - NAND I/O request object
+ * @pos: the position this I/O request is targeting
+ * @dataoffs: the offset within the page
+ * @datalen: number of data bytes to read from/write to this page
+ * @databuf: buffer to store data in or get data from
+ * @ooboffs: the OOB offset within the page
+ * @ooblen: the number of OOB bytes to read from/write to this page
+ * @oobbuf: buffer to store OOB data in or get OOB data from
+ * @mode: one of the %MTD_OPS_XXX mode
+ *
+ * This object is used to pass per-page I/O requests to NAND sub-layers. This
+ * way all useful information are already formatted in a useful way and
+ * specific NAND layers can focus on translating these information into
+ * specific commands/operations.
+ */
+struct nand_page_io_req {
+	struct nand_pos pos;
+	unsigned int dataoffs;
+	unsigned int datalen;
+	union {
+		const void *out;
+		void *in;
+	} databuf;
+	unsigned int ooboffs;
+	unsigned int ooblen;
+	union {
+		const void *out;
+		void *in;
+	} oobbuf;
+	int mode;
+};
+
+/**
+ * struct nand_ecc_req - NAND ECC requirements
+ * @strength: ECC strength
+ * @step_size: ECC step/block size
+ */
+struct nand_ecc_req {
+	unsigned int strength;
+	unsigned int step_size;
+};
+
+#define NAND_ECCREQ(str, stp) { .strength = (str), .step_size = (stp) }
+
+/**
+ * struct nand_bbt - bad block table object
+ * @cache: in memory BBT cache
+ */
+struct nand_bbt {
+	unsigned long *cache;
+};
+
+struct nand_device;
+
+/**
+ * struct nand_ops - NAND operations
+ * @erase: erase a specific block. No need to check if the block is bad before
+ *	   erasing, this has been taken care of by the generic NAND layer
+ * @markbad: mark a specific block bad. No need to check if the block is
+ *	     already marked bad, this has been taken care of by the generic
+ *	     NAND layer. This method should just write the BBM (Bad Block
+ *	     Marker) so that future call to struct_nand_ops->isbad() return
+ *	     true
+ * @isbad: check whether a block is bad or not. This method should just read
+ *	   the BBM and return whether the block is bad or not based on what it
+ *	   reads
+ *
+ * These are all low level operations that should be implemented by specialized
+ * NAND layers (SPI NAND, raw NAND, ...).
+ */
+struct nand_ops {
+	int (*erase)(struct nand_device *nand, const struct nand_pos *pos);
+	int (*markbad)(struct nand_device *nand, const struct nand_pos *pos);
+	bool (*isbad)(struct nand_device *nand, const struct nand_pos *pos);
+};
+
+/**
+ * struct nand_device - NAND device
+ * @mtd: MTD instance attached to the NAND device
+ * @memorg: memory layout
+ * @eccreq: ECC requirements
+ * @rowconv: position to row address converter
+ * @bbt: bad block table info
+ * @ops: NAND operations attached to the NAND device
+ *
+ * Generic NAND object. Specialized NAND layers (raw NAND, SPI NAND, OneNAND)
+ * should declare their own NAND object embedding a nand_device struct (that's
+ * how inheritance is done).
+ * struct_nand_device->memorg and struct_nand_device->eccreq should be filled
+ * at device detection time to reflect the NAND device
+ * capabilities/requirements. Once this is done nanddev_init() can be called.
+ * It will take care of converting NAND information into MTD ones, which means
+ * the specialized NAND layers should never manually tweak
+ * struct_nand_device->mtd except for the ->_read/write() hooks.
+ */
+struct nand_device {
+	struct mtd_info *mtd;
+	struct nand_memory_organization memorg;
+	struct nand_ecc_req eccreq;
+	struct nand_row_converter rowconv;
+	struct nand_bbt bbt;
+	const struct nand_ops *ops;
+};
+
+/**
+ * struct nand_io_iter - NAND I/O iterator
+ * @req: current I/O request
+ * @oobbytes_per_page: maximum number of OOB bytes per page
+ * @dataleft: remaining number of data bytes to read/write
+ * @oobleft: remaining number of OOB bytes to read/write
+ *
+ * Can be used by specialized NAND layers to iterate over all pages covered
+ * by an MTD I/O request, which should greatly simplifies the boiler-plate
+ * code needed to read/write data from/to a NAND device.
+ */
+struct nand_io_iter {
+	struct nand_page_io_req req;
+	unsigned int oobbytes_per_page;
+	unsigned int dataleft;
+	unsigned int oobleft;
+};
+
+/**
+ * mtd_to_nanddev() - Get the NAND device attached to the MTD instance
+ * @mtd: MTD instance
+ *
+ * Return: the NAND device embedding @mtd.
+ */
+static inline struct nand_device *mtd_to_nanddev(struct mtd_info *mtd)
+{
+	return mtd->priv;
+}
+
+/**
+ * nanddev_to_mtd() - Get the MTD device attached to a NAND device
+ * @nand: NAND device
+ *
+ * Return: the MTD device embedded in @nand.
+ */
+static inline struct mtd_info *nanddev_to_mtd(struct nand_device *nand)
+{
+	return nand->mtd;
+}
+
+/*
+ * nanddev_bits_per_cell() - Get the number of bits per cell
+ * @nand: NAND device
+ *
+ * Return: the number of bits per cell.
+ */
+static inline unsigned int nanddev_bits_per_cell(const struct nand_device *nand)
+{
+	return nand->memorg.bits_per_cell;
+}
+
+/**
+ * nanddev_page_size() - Get NAND page size
+ * @nand: NAND device
+ *
+ * Return: the page size.
+ */
+static inline size_t nanddev_page_size(const struct nand_device *nand)
+{
+	return nand->memorg.pagesize;
+}
+
+/**
+ * nanddev_per_page_oobsize() - Get NAND OOB size
+ * @nand: NAND device
+ *
+ * Return: the OOB size.
+ */
+static inline unsigned int
+nanddev_per_page_oobsize(const struct nand_device *nand)
+{
+	return nand->memorg.oobsize;
+}
+
+/**
+ * nanddev_pages_per_eraseblock() - Get the number of pages per eraseblock
+ * @nand: NAND device
+ *
+ * Return: the number of pages per eraseblock.
+ */
+static inline unsigned int
+nanddev_pages_per_eraseblock(const struct nand_device *nand)
+{
+	return nand->memorg.pages_per_eraseblock;
+}
+
+/**
+ * nanddev_per_page_oobsize() - Get NAND erase block size
+ * @nand: NAND device
+ *
+ * Return: the eraseblock size.
+ */
+static inline size_t nanddev_eraseblock_size(const struct nand_device *nand)
+{
+	return nand->memorg.pagesize * nand->memorg.pages_per_eraseblock;
+}
+
+/**
+ * nanddev_eraseblocks_per_lun() - Get the number of eraseblocks per LUN
+ * @nand: NAND device
+ *
+ * Return: the number of eraseblocks per LUN.
+ */
+static inline unsigned int
+nanddev_eraseblocks_per_lun(const struct nand_device *nand)
+{
+	return nand->memorg.eraseblocks_per_lun;
+}
+
+/**
+ * nanddev_target_size() - Get the total size provided by a single target/die
+ * @nand: NAND device
+ *
+ * Return: the total size exposed by a single target/die in bytes.
+ */
+static inline u64 nanddev_target_size(const struct nand_device *nand)
+{
+	return (u64)nand->memorg.luns_per_target *
+	       nand->memorg.eraseblocks_per_lun *
+	       nand->memorg.pages_per_eraseblock *
+	       nand->memorg.pagesize;
+}
+
+/**
+ * nanddev_ntarget() - Get the total of targets
+ * @nand: NAND device
+ *
+ * Return: the number of targets/dies exposed by @nand.
+ */
+static inline unsigned int nanddev_ntargets(const struct nand_device *nand)
+{
+	return nand->memorg.ntargets;
+}
+
+/**
+ * nanddev_neraseblocks() - Get the total number of erasablocks
+ * @nand: NAND device
+ *
+ * Return: the total number of eraseblocks exposed by @nand.
+ */
+static inline unsigned int nanddev_neraseblocks(const struct nand_device *nand)
+{
+	return (u64)nand->memorg.luns_per_target *
+	       nand->memorg.eraseblocks_per_lun *
+	       nand->memorg.pages_per_eraseblock;
+}
+
+/**
+ * nanddev_size() - Get NAND size
+ * @nand: NAND device
+ *
+ * Return: the total size (in bytes) exposed by @nand.
+ */
+static inline u64 nanddev_size(const struct nand_device *nand)
+{
+	return nanddev_target_size(nand) * nanddev_ntargets(nand);
+}
+
+/**
+ * nanddev_get_memorg() - Extract memory organization info from a NAND device
+ * @nand: NAND device
+ *
+ * This can be used by the upper layer to fill the memorg info before calling
+ * nanddev_init().
+ *
+ * Return: the memorg object embedded in the NAND device.
+ */
+static inline struct nand_memory_organization *
+nanddev_get_memorg(struct nand_device *nand)
+{
+	return &nand->memorg;
+}
+
+int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
+		 struct module *owner);
+void nanddev_cleanup(struct nand_device *nand);
+
+/**
+ * nanddev_register() - Register a NAND device
+ * @nand: NAND device
+ *
+ * Register a NAND device.
+ * This function is just a wrapper around mtd_device_register()
+ * registering the MTD device embedded in @nand.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+static inline int nanddev_register(struct nand_device *nand)
+{
+	return mtd_device_register(nand->mtd, NULL, 0);
+}
+
+/**
+ * nanddev_unregister() - Unregister a NAND device
+ * @nand: NAND device
+ *
+ * Unregister a NAND device.
+ * This function is just a wrapper around mtd_device_unregister()
+ * unregistering the MTD device embedded in @nand.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+static inline int nanddev_unregister(struct nand_device *nand)
+{
+	return mtd_device_unregister(nand->mtd);
+}
+
+/**
+ * nanddev_set_of_node() - Attach a DT node to a NAND device
+ * @nand: NAND device
+ * @np: DT node
+ *
+ * Attach a DT node to a NAND device.
+ */
+static inline void nanddev_set_of_node(struct nand_device *nand,
+				       const struct device_node *np)
+{
+	mtd_set_of_node(nand->mtd, np);
+}
+
+/**
+ * nanddev_get_of_node() - Retrieve the DT node attached to a NAND device
+ * @nand: NAND device
+ *
+ * Return: the DT node attached to @nand.
+ */
+static inline const struct device_node *nanddev_get_of_node(struct nand_device *nand)
+{
+	return mtd_get_of_node(nand->mtd);
+}
+
+/**
+ * nanddev_offs_to_pos() - Convert an absolute NAND offset into a NAND position
+ * @nand: NAND device
+ * @offs: absolute NAND offset (usually passed by the MTD layer)
+ * @pos: a NAND position object to fill in
+ *
+ * Converts @offs into a nand_pos representation.
+ *
+ * Return: the offset within the NAND page pointed by @pos.
+ */
+static inline unsigned int nanddev_offs_to_pos(struct nand_device *nand,
+					       loff_t offs,
+					       struct nand_pos *pos)
+{
+	unsigned int pageoffs;
+	u64 tmp = offs;
+
+	pageoffs = do_div(tmp, nand->memorg.pagesize);
+	pos->page = do_div(tmp, nand->memorg.pages_per_eraseblock);
+	pos->eraseblock = do_div(tmp, nand->memorg.eraseblocks_per_lun);
+	pos->plane = pos->eraseblock % nand->memorg.planes_per_lun;
+	pos->lun = do_div(tmp, nand->memorg.luns_per_target);
+	pos->target = tmp;
+
+	return pageoffs;
+}
+
+/**
+ * nanddev_pos_cmp() - Compare two NAND positions
+ * @a: First NAND position
+ * @b: Second NAND position
+ *
+ * Compares two NAND positions.
+ *
+ * Return: -1 if @a < @b, 0 if @a == @b and 1 if @a > @b.
+ */
+static inline int nanddev_pos_cmp(const struct nand_pos *a,
+				  const struct nand_pos *b)
+{
+	if (a->target != b->target)
+		return a->target < b->target ? -1 : 1;
+
+	if (a->lun != b->lun)
+		return a->lun < b->lun ? -1 : 1;
+
+	if (a->eraseblock != b->eraseblock)
+		return a->eraseblock < b->eraseblock ? -1 : 1;
+
+	if (a->page != b->page)
+		return a->page < b->page ? -1 : 1;
+
+	return 0;
+}
+
+/**
+ * nanddev_pos_to_offs() - Convert a NAND position into an absolute offset
+ * @nand: NAND device
+ * @pos: the NAND position to convert
+ *
+ * Converts @pos NAND position into an absolute offset.
+ *
+ * Return: the absolute offset. Note that @pos points to the beginning of a
+ *	   page, if one wants to point to a specific offset within this page
+ *	   the returned offset has to be adjusted manually.
+ */
+static inline loff_t nanddev_pos_to_offs(struct nand_device *nand,
+					 const struct nand_pos *pos)
+{
+	unsigned int npages;
+
+	npages = pos->page +
+		 ((pos->eraseblock +
+		   (pos->lun +
+		    (pos->target * nand->memorg.luns_per_target)) *
+		   nand->memorg.eraseblocks_per_lun) *
+		  nand->memorg.pages_per_eraseblock);
+
+	return (loff_t)npages * nand->memorg.pagesize;
+}
+
+/**
+ * nanddev_pos_to_row() - Extract a row address from a NAND position
+ * @nand: NAND device
+ * @pos: the position to convert
+ *
+ * Converts a NAND position into a row address that can then be passed to the
+ * device.
+ *
+ * Return: the row address extracted from @pos.
+ */
+static inline unsigned int nanddev_pos_to_row(struct nand_device *nand,
+					      const struct nand_pos *pos)
+{
+	return (pos->lun << nand->rowconv.lun_addr_shift) |
+	       (pos->eraseblock << nand->rowconv.eraseblock_addr_shift) |
+	       pos->page;
+}
+
+/**
+ * nanddev_pos_next_target() - Move a position to the next target/die
+ * @nand: NAND device
+ * @pos: the position to update
+ *
+ * Updates @pos to point to the start of the next target/die. Useful when you
+ * want to iterate over all targets/dies of a NAND device.
+ */
+static inline void nanddev_pos_next_target(struct nand_device *nand,
+					   struct nand_pos *pos)
+{
+	pos->page = 0;
+	pos->plane = 0;
+	pos->eraseblock = 0;
+	pos->lun = 0;
+	pos->target++;
+}
+
+/**
+ * nanddev_pos_next_lun() - Move a position to the next LUN
+ * @nand: NAND device
+ * @pos: the position to update
+ *
+ * Updates @pos to point to the start of the next LUN. Useful when you want to
+ * iterate over all LUNs of a NAND device.
+ */
+static inline void nanddev_pos_next_lun(struct nand_device *nand,
+					struct nand_pos *pos)
+{
+	if (pos->lun >= nand->memorg.luns_per_target - 1)
+		return nanddev_pos_next_target(nand, pos);
+
+	pos->lun++;
+	pos->page = 0;
+	pos->plane = 0;
+	pos->eraseblock = 0;
+}
+
+/**
+ * nanddev_pos_next_eraseblock() - Move a position to the next eraseblock
+ * @nand: NAND device
+ * @pos: the position to update
+ *
+ * Updates @pos to point to the start of the next eraseblock. Useful when you
+ * want to iterate over all eraseblocks of a NAND device.
+ */
+static inline void nanddev_pos_next_eraseblock(struct nand_device *nand,
+					       struct nand_pos *pos)
+{
+	if (pos->eraseblock >= nand->memorg.eraseblocks_per_lun - 1)
+		return nanddev_pos_next_lun(nand, pos);
+
+	pos->eraseblock++;
+	pos->page = 0;
+	pos->plane = pos->eraseblock % nand->memorg.planes_per_lun;
+}
+
+/**
+ * nanddev_pos_next_eraseblock() - Move a position to the next page
+ * @nand: NAND device
+ * @pos: the position to update
+ *
+ * Updates @pos to point to the start of the next page. Useful when you want to
+ * iterate over all pages of a NAND device.
+ */
+static inline void nanddev_pos_next_page(struct nand_device *nand,
+					 struct nand_pos *pos)
+{
+	if (pos->page >= nand->memorg.pages_per_eraseblock - 1)
+		return nanddev_pos_next_eraseblock(nand, pos);
+
+	pos->page++;
+}
+
+/**
+ * nand_io_iter_init - Initialize a NAND I/O iterator
+ * @nand: NAND device
+ * @offs: absolute offset
+ * @req: MTD request
+ * @iter: NAND I/O iterator
+ *
+ * Initializes a NAND iterator based on the information passed by the MTD
+ * layer.
+ */
+static inline void nanddev_io_iter_init(struct nand_device *nand,
+					loff_t offs, struct mtd_oob_ops *req,
+					struct nand_io_iter *iter)
+{
+	struct mtd_info *mtd = nanddev_to_mtd(nand);
+
+	iter->req.mode = req->mode;
+	iter->req.dataoffs = nanddev_offs_to_pos(nand, offs, &iter->req.pos);
+	iter->req.ooboffs = req->ooboffs;
+	iter->oobbytes_per_page = mtd_oobavail(mtd, req);
+	iter->dataleft = req->len;
+	iter->oobleft = req->ooblen;
+	iter->req.databuf.in = req->datbuf;
+	iter->req.datalen = min_t(unsigned int,
+				  nand->memorg.pagesize - iter->req.dataoffs,
+				  iter->dataleft);
+	iter->req.oobbuf.in = req->oobbuf;
+	iter->req.ooblen = min_t(unsigned int,
+				 iter->oobbytes_per_page - iter->req.ooboffs,
+				 iter->oobleft);
+}
+
+/**
+ * nand_io_iter_next_page - Move to the next page
+ * @nand: NAND device
+ * @iter: NAND I/O iterator
+ *
+ * Updates the @iter to point to the next page.
+ */
+static inline void nanddev_io_iter_next_page(struct nand_device *nand,
+					     struct nand_io_iter *iter)
+{
+	nanddev_pos_next_page(nand, &iter->req.pos);
+	iter->dataleft -= iter->req.datalen;
+	iter->req.databuf.in += iter->req.datalen;
+	iter->oobleft -= iter->req.ooblen;
+	iter->req.oobbuf.in += iter->req.ooblen;
+	iter->req.dataoffs = 0;
+	iter->req.ooboffs = 0;
+	iter->req.datalen = min_t(unsigned int, nand->memorg.pagesize,
+				  iter->dataleft);
+	iter->req.ooblen = min_t(unsigned int, iter->oobbytes_per_page,
+				 iter->oobleft);
+}
+
+/**
+ * nand_io_iter_end - Should end iteration or not
+ * @nand: NAND device
+ * @iter: NAND I/O iterator
+ *
+ * Check whether @iter has reached the end of the NAND portion it was asked to
+ * iterate on or not.
+ *
+ * Return: true if @iter has reached the end of the iteration request, false
+ *	   otherwise.
+ */
+static inline bool nanddev_io_iter_end(struct nand_device *nand,
+				       const struct nand_io_iter *iter)
+{
+	if (iter->dataleft || iter->oobleft)
+		return false;
+
+	return true;
+}
+
+/**
+ * nand_io_for_each_page - Iterate over all NAND pages contained in an MTD I/O
+ *			   request
+ * @nand: NAND device
+ * @start: start address to read/write from
+ * @req: MTD I/O request
+ * @iter: NAND I/O iterator
+ *
+ * Should be used for iterate over pages that are contained in an MTD request.
+ */
+#define nanddev_io_for_each_page(nand, start, req, iter)		\
+	for (nanddev_io_iter_init(nand, start, req, iter);		\
+	     !nanddev_io_iter_end(nand, iter);				\
+	     nanddev_io_iter_next_page(nand, iter))
+
+bool nanddev_isbad(struct nand_device *nand, const struct nand_pos *pos);
+bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos);
+int nanddev_erase(struct nand_device *nand, const struct nand_pos *pos);
+int nanddev_markbad(struct nand_device *nand, const struct nand_pos *pos);
+
+/* BBT related functions */
+enum nand_bbt_block_status {
+	NAND_BBT_BLOCK_STATUS_UNKNOWN,
+	NAND_BBT_BLOCK_GOOD,
+	NAND_BBT_BLOCK_WORN,
+	NAND_BBT_BLOCK_RESERVED,
+	NAND_BBT_BLOCK_FACTORY_BAD,
+	NAND_BBT_BLOCK_NUM_STATUS,
+};
+
+int nanddev_bbt_init(struct nand_device *nand);
+void nanddev_bbt_cleanup(struct nand_device *nand);
+int nanddev_bbt_update(struct nand_device *nand);
+int nanddev_bbt_get_block_status(const struct nand_device *nand,
+				 unsigned int entry);
+int nanddev_bbt_set_block_status(struct nand_device *nand, unsigned int entry,
+				 enum nand_bbt_block_status status);
+int nanddev_bbt_markbad(struct nand_device *nand, unsigned int block);
+
+/**
+ * nanddev_bbt_pos_to_entry() - Convert a NAND position into a BBT entry
+ * @nand: NAND device
+ * @pos: the NAND position we want to get BBT entry for
+ *
+ * Return the BBT entry used to store information about the eraseblock pointed
+ * by @pos.
+ *
+ * Return: the BBT entry storing information about eraseblock pointed by @pos.
+ */
+static inline unsigned int nanddev_bbt_pos_to_entry(struct nand_device *nand,
+						    const struct nand_pos *pos)
+{
+	return pos->eraseblock +
+	       ((pos->lun + (pos->target * nand->memorg.luns_per_target)) *
+		nand->memorg.eraseblocks_per_lun);
+}
+
+/**
+ * nanddev_bbt_is_initialized() - Check if the BBT has been initialized
+ * @nand: NAND device
+ *
+ * Return: true if the BBT has been initialized, false otherwise.
+ */
+static inline bool nanddev_bbt_is_initialized(struct nand_device *nand)
+{
+	return !!nand->bbt.cache;
+}
+
+/* MTD -> NAND helper functions. */
+int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo);
+
+#endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
index ce0e8dbee4..3822237f2a 100644
--- a/include/linux/mtd/partitions.h
+++ b/include/linux/mtd/partitions.h
@@ -81,10 +81,30 @@ extern void register_mtd_parser(struct mtd_part_parser *parser);
 extern void deregister_mtd_parser(struct mtd_part_parser *parser);
 #endif
 
-int mtd_is_partition(const struct mtd_info *mtd);
 int mtd_add_partition(struct mtd_info *master, const char *name,
 		      long long offset, long long length);
 int mtd_del_partition(struct mtd_info *master, int partno);
 uint64_t mtd_get_device_size(const struct mtd_info *mtd);
 
+#if defined(CONFIG_MTD_PARTITIONS)
+int mtd_parse_partitions(struct mtd_info *parent, const char **_mtdparts,
+			 struct mtd_partition **_parts, int *_nparts);
+void mtd_free_parsed_partitions(struct mtd_partition *parts,
+				unsigned int nparts);
+#else
+static inline int
+mtd_parse_partitions(struct mtd_info *parent, const char **_mtdparts,
+		     struct mtd_partition **_parts, int *_nparts)
+{
+	*_nparts = 0;
+
+	return 0;
+}
+static inline void
+mtd_free_parsed_partitions(struct mtd_partition *parts, unsigned int nparts)
+{
+	return;
+}
+#endif /* defined(MTD_PARTITIONS) */
+
 #endif
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
new file mode 100644
index 0000000000..8c9c756179
--- /dev/null
+++ b/include/linux/mtd/spinand.h
@@ -0,0 +1,432 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016-2017 Micron Technology, Inc.
+ *
+ *  Authors:
+ *	Peter Pan <peterpandong@micron.com>
+ */
+#ifndef __LINUX_MTD_SPINAND_H
+#define __LINUX_MTD_SPINAND_H
+
+#ifndef __UBOOT__
+#include <linux/mutex.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+#else
+#include <common.h>
+#include <spi.h>
+#include <spi-mem.h>
+#include <linux/mtd/nand.h>
+#endif
+
+/**
+ * Standard SPI NAND flash operations
+ */
+
+#define SPINAND_RESET_OP						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0xff, 1),				\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPINAND_WR_EN_DIS_OP(enable)					\
+	SPI_MEM_OP(SPI_MEM_OP_CMD((enable) ? 0x06 : 0x04, 1),		\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPINAND_READID_OP(ndummy, buf, len)				\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x9f, 1),				\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 1))
+
+#define SPINAND_SET_FEATURE_OP(reg, valptr)				\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x1f, 1),				\
+		   SPI_MEM_OP_ADDR(1, reg, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(1, valptr, 1))
+
+#define SPINAND_GET_FEATURE_OP(reg, valptr)				\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x0f, 1),				\
+		   SPI_MEM_OP_ADDR(1, reg, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_IN(1, valptr, 1))
+
+#define SPINAND_BLK_ERASE_OP(addr)					\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0xd8, 1),				\
+		   SPI_MEM_OP_ADDR(3, addr, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPINAND_PAGE_READ_OP(addr)					\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x13, 1),				\
+		   SPI_MEM_OP_ADDR(3, addr, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPINAND_PAGE_READ_FROM_CACHE_OP(fast, addr, ndummy, buf, len)	\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(fast ? 0x0b : 0x03, 1),		\
+		   SPI_MEM_OP_ADDR(2, addr, 1),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 1))
+
+#define SPINAND_PAGE_READ_FROM_CACHE_X2_OP(addr, ndummy, buf, len)	\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1),				\
+		   SPI_MEM_OP_ADDR(2, addr, 1),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 2))
+
+#define SPINAND_PAGE_READ_FROM_CACHE_X4_OP(addr, ndummy, buf, len)	\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1),				\
+		   SPI_MEM_OP_ADDR(2, addr, 1),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 4))
+
+#define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(addr, ndummy, buf, len)	\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1),				\
+		   SPI_MEM_OP_ADDR(2, addr, 2),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 2),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 2))
+
+#define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(addr, ndummy, buf, len)	\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1),				\
+		   SPI_MEM_OP_ADDR(2, addr, 4),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 4),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 4))
+
+#define SPINAND_PROG_EXEC_OP(addr)					\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1),				\
+		   SPI_MEM_OP_ADDR(3, addr, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPINAND_PROG_LOAD(reset, addr, buf, len)			\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0x02 : 0x84, 1),		\
+		   SPI_MEM_OP_ADDR(2, addr, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(len, buf, 1))
+
+#define SPINAND_PROG_LOAD_X4(reset, addr, buf, len)			\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0x32 : 0x34, 1),		\
+		   SPI_MEM_OP_ADDR(2, addr, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(len, buf, 4))
+
+/**
+ * Standard SPI NAND flash commands
+ */
+#define SPINAND_CMD_PROG_LOAD_X4		0x32
+#define SPINAND_CMD_PROG_LOAD_RDM_DATA_X4	0x34
+
+/* feature register */
+#define REG_BLOCK_LOCK		0xa0
+#define BL_ALL_UNLOCKED		0x00
+
+/* configuration register */
+#define REG_CFG			0xb0
+#define CFG_OTP_ENABLE		BIT(6)
+#define CFG_ECC_ENABLE		BIT(4)
+#define CFG_QUAD_ENABLE		BIT(0)
+
+/* status register */
+#define REG_STATUS		0xc0
+#define STATUS_BUSY		BIT(0)
+#define STATUS_ERASE_FAILED	BIT(2)
+#define STATUS_PROG_FAILED	BIT(3)
+#define STATUS_ECC_MASK		GENMASK(5, 4)
+#define STATUS_ECC_NO_BITFLIPS	(0 << 4)
+#define STATUS_ECC_HAS_BITFLIPS	(1 << 4)
+#define STATUS_ECC_UNCOR_ERROR	(2 << 4)
+
+struct spinand_op;
+struct spinand_device;
+
+#define SPINAND_MAX_ID_LEN	4
+
+/**
+ * struct spinand_id - SPI NAND id structure
+ * @data: buffer containing the id bytes. Currently 4 bytes large, but can
+ *	  be extended if required
+ * @len: ID length
+ *
+ * struct_spinand_id->data contains all bytes returned after a READ_ID command,
+ * including dummy bytes if the chip does not emit ID bytes right after the
+ * READ_ID command. The responsibility to extract real ID bytes is left to
+ * struct_manufacurer_ops->detect().
+ */
+struct spinand_id {
+	u8 data[SPINAND_MAX_ID_LEN];
+	int len;
+};
+
+/**
+ * struct manufacurer_ops - SPI NAND manufacturer specific operations
+ * @detect: detect a SPI NAND device. Every time a SPI NAND device is probed
+ *	    the core calls the struct_manufacurer_ops->detect() hook of each
+ *	    registered manufacturer until one of them return 1. Note that
+ *	    the first thing to check in this hook is that the manufacturer ID
+ *	    in struct_spinand_device->id matches the manufacturer whose
+ *	    ->detect() hook has been called. Should return 1 if there's a
+ *	    match, 0 if the manufacturer ID does not match and a negative
+ *	    error code otherwise. When true is returned, the core assumes
+ *	    that properties of the NAND chip (spinand->base.memorg and
+ *	    spinand->base.eccreq) have been filled
+ * @init: initialize a SPI NAND device
+ * @cleanup: cleanup a SPI NAND device
+ *
+ * Each SPI NAND manufacturer driver should implement this interface so that
+ * NAND chips coming from this vendor can be detected and initialized properly.
+ */
+struct spinand_manufacturer_ops {
+	int (*detect)(struct spinand_device *spinand);
+	int (*init)(struct spinand_device *spinand);
+	void (*cleanup)(struct spinand_device *spinand);
+};
+
+/**
+ * struct spinand_manufacturer - SPI NAND manufacturer instance
+ * @id: manufacturer ID
+ * @name: manufacturer name
+ * @ops: manufacturer operations
+ */
+struct spinand_manufacturer {
+	u8 id;
+	char *name;
+	const struct spinand_manufacturer_ops *ops;
+};
+
+/* SPI NAND manufacturers */
+extern const struct spinand_manufacturer macronix_spinand_manufacturer;
+extern const struct spinand_manufacturer micron_spinand_manufacturer;
+extern const struct spinand_manufacturer winbond_spinand_manufacturer;
+
+/**
+ * struct spinand_op_variants - SPI NAND operation variants
+ * @ops: the list of variants for a given operation
+ * @nops: the number of variants
+ *
+ * Some operations like read-from-cache/write-to-cache have several variants
+ * depending on the number of IO lines you use to transfer data or address
+ * cycles. This structure is a way to describe the different variants supported
+ * by a chip and let the core pick the best one based on the SPI mem controller
+ * capabilities.
+ */
+struct spinand_op_variants {
+	const struct spi_mem_op *ops;
+	unsigned int nops;
+};
+
+#define SPINAND_OP_VARIANTS(name, ...)					\
+	const struct spinand_op_variants name = {			\
+		.ops = (struct spi_mem_op[]) { __VA_ARGS__ },		\
+		.nops = sizeof((struct spi_mem_op[]){ __VA_ARGS__ }) /	\
+			sizeof(struct spi_mem_op),			\
+	}
+
+/**
+ * spinand_ecc_info - description of the on-die ECC implemented by a SPI NAND
+ *		      chip
+ * @get_status: get the ECC status. Should return a positive number encoding
+ *		the number of corrected bitflips if correction was possible or
+ *		-EBADMSG if there are uncorrectable errors. I can also return
+ *		other negative error codes if the error is not caused by
+ *		uncorrectable bitflips
+ * @ooblayout: the OOB layout used by the on-die ECC implementation
+ */
+struct spinand_ecc_info {
+	int (*get_status)(struct spinand_device *spinand, u8 status);
+	const struct mtd_ooblayout_ops *ooblayout;
+};
+
+#define SPINAND_HAS_QE_BIT		BIT(0)
+
+/**
+ * struct spinand_info - Structure used to describe SPI NAND chips
+ * @model: model name
+ * @devid: device ID
+ * @flags: OR-ing of the SPINAND_XXX flags
+ * @memorg: memory organization
+ * @eccreq: ECC requirements
+ * @eccinfo: on-die ECC info
+ * @op_variants: operations variants
+ * @op_variants.read_cache: variants of the read-cache operation
+ * @op_variants.write_cache: variants of the write-cache operation
+ * @op_variants.update_cache: variants of the update-cache operation
+ * @select_target: function used to select a target/die. Required only for
+ *		   multi-die chips
+ *
+ * Each SPI NAND manufacturer driver should have a spinand_info table
+ * describing all the chips supported by the driver.
+ */
+struct spinand_info {
+	const char *model;
+	u8 devid;
+	u32 flags;
+	struct nand_memory_organization memorg;
+	struct nand_ecc_req eccreq;
+	struct spinand_ecc_info eccinfo;
+	struct {
+		const struct spinand_op_variants *read_cache;
+		const struct spinand_op_variants *write_cache;
+		const struct spinand_op_variants *update_cache;
+	} op_variants;
+	int (*select_target)(struct spinand_device *spinand,
+			     unsigned int target);
+};
+
+#define SPINAND_INFO_OP_VARIANTS(__read, __write, __update)		\
+	{								\
+		.read_cache = __read,					\
+		.write_cache = __write,					\
+		.update_cache = __update,				\
+	}
+
+#define SPINAND_ECCINFO(__ooblayout, __get_status)			\
+	.eccinfo = {							\
+		.ooblayout = __ooblayout,				\
+		.get_status = __get_status,				\
+	}
+
+#define SPINAND_SELECT_TARGET(__func)					\
+	.select_target = __func,
+
+#define SPINAND_INFO(__model, __id, __memorg, __eccreq, __op_variants,	\
+		     __flags, ...)					\
+	{								\
+		.model = __model,					\
+		.devid = __id,						\
+		.memorg = __memorg,					\
+		.eccreq = __eccreq,					\
+		.op_variants = __op_variants,				\
+		.flags = __flags,					\
+		__VA_ARGS__						\
+	}
+
+/**
+ * struct spinand_device - SPI NAND device instance
+ * @base: NAND device instance
+ * @slave: pointer to the SPI slave object
+ * @lock: lock used to serialize accesses to the NAND
+ * @id: NAND ID as returned by READ_ID
+ * @flags: NAND flags
+ * @op_templates: various SPI mem op templates
+ * @op_templates.read_cache: read cache op template
+ * @op_templates.write_cache: write cache op template
+ * @op_templates.update_cache: update cache op template
+ * @select_target: select a specific target/die. Usually called before sending
+ *		   a command addressing a page or an eraseblock embedded in
+ *		   this die. Only required if your chip exposes several dies
+ * @cur_target: currently selected target/die
+ * @eccinfo: on-die ECC information
+ * @cfg_cache: config register cache. One entry per die
+ * @databuf: bounce buffer for data
+ * @oobbuf: bounce buffer for OOB data
+ * @scratchbuf: buffer used for everything but page accesses. This is needed
+ *		because the spi-mem interface explicitly requests that buffers
+ *		passed in spi_mem_op be DMA-able, so we can't based the bufs on
+ *		the stack
+ * @manufacturer: SPI NAND manufacturer information
+ * @priv: manufacturer private data
+ */
+struct spinand_device {
+	struct nand_device base;
+#ifndef __UBOOT__
+	struct spi_mem *spimem;
+	struct mutex lock;
+#else
+	struct spi_slave *slave;
+#endif
+	struct spinand_id id;
+	u32 flags;
+
+	struct {
+		const struct spi_mem_op *read_cache;
+		const struct spi_mem_op *write_cache;
+		const struct spi_mem_op *update_cache;
+	} op_templates;
+
+	int (*select_target)(struct spinand_device *spinand,
+			     unsigned int target);
+	unsigned int cur_target;
+
+	struct spinand_ecc_info eccinfo;
+
+	u8 *cfg_cache;
+	u8 *databuf;
+	u8 *oobbuf;
+	u8 *scratchbuf;
+	const struct spinand_manufacturer *manufacturer;
+	void *priv;
+};
+
+/**
+ * mtd_to_spinand() - Get the SPI NAND device attached to an MTD instance
+ * @mtd: MTD instance
+ *
+ * Return: the SPI NAND device attached to @mtd.
+ */
+static inline struct spinand_device *mtd_to_spinand(struct mtd_info *mtd)
+{
+	return container_of(mtd_to_nanddev(mtd), struct spinand_device, base);
+}
+
+/**
+ * spinand_to_mtd() - Get the MTD device embedded in a SPI NAND device
+ * @spinand: SPI NAND device
+ *
+ * Return: the MTD device embedded in @spinand.
+ */
+static inline struct mtd_info *spinand_to_mtd(struct spinand_device *spinand)
+{
+	return nanddev_to_mtd(&spinand->base);
+}
+
+/**
+ * nand_to_spinand() - Get the SPI NAND device embedding an NAND object
+ * @nand: NAND object
+ *
+ * Return: the SPI NAND device embedding @nand.
+ */
+static inline struct spinand_device *nand_to_spinand(struct nand_device *nand)
+{
+	return container_of(nand, struct spinand_device, base);
+}
+
+/**
+ * spinand_to_nand() - Get the NAND device embedded in a SPI NAND object
+ * @spinand: SPI NAND device
+ *
+ * Return: the NAND device embedded in @spinand.
+ */
+static inline struct nand_device *
+spinand_to_nand(struct spinand_device *spinand)
+{
+	return &spinand->base;
+}
+
+/**
+ * spinand_set_of_node - Attach a DT node to a SPI NAND device
+ * @spinand: SPI NAND device
+ * @np: DT node
+ *
+ * Attach a DT node to a SPI NAND device.
+ */
+static inline void spinand_set_of_node(struct spinand_device *spinand,
+				       const struct device_node *np)
+{
+	nanddev_set_of_node(&spinand->base, np);
+}
+
+int spinand_match_and_init(struct spinand_device *dev,
+			   const struct spinand_info *table,
+			   unsigned int table_size, u8 devid);
+
+int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val);
+int spinand_select_target(struct spinand_device *spinand, unsigned int target);
+
+#endif /* __LINUX_MTD_SPINAND_H */
diff --git a/include/mtd.h b/include/mtd.h
index 548e7f191b..65fcd3c700 100644
--- a/include/mtd.h
+++ b/include/mtd.h
@@ -8,15 +8,7 @@
 
 #include <linux/mtd/mtd.h>
 
-/*
- * Get mtd_info structure of the dev, which is stored as uclass private.
- *
- * @dev: The MTD device
- * @return: pointer to mtd_info, NULL on error
- */
-static inline struct mtd_info *mtd_get_info(struct udevice *dev)
-{
-	return dev_get_uclass_priv(dev);
-}
+int mtd_probe(struct udevice *dev);
+int mtd_probe_devices(void);
 
 #endif	/* _MTD_H_ */
diff --git a/include/spi-mem.h b/include/spi-mem.h
new file mode 100644
index 0000000000..36814efa86
--- /dev/null
+++ b/include/spi-mem.h
@@ -0,0 +1,258 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018 Exceet Electronics GmbH
+ * Copyright (C) 2018 Bootlin
+ *
+ * Author:
+ *	Peter Pan <peterpandong@micron.com>
+ *	Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef __UBOOT_SPI_MEM_H
+#define __UBOOT_SPI_MEM_H
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <spi.h>
+
+#define SPI_MEM_OP_CMD(__opcode, __buswidth)			\
+	{							\
+		.buswidth = __buswidth,				\
+		.opcode = __opcode,				\
+	}
+
+#define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth)		\
+	{							\
+		.nbytes = __nbytes,				\
+		.val = __val,					\
+		.buswidth = __buswidth,				\
+	}
+
+#define SPI_MEM_OP_NO_ADDR	{ }
+
+#define SPI_MEM_OP_DUMMY(__nbytes, __buswidth)			\
+	{							\
+		.nbytes = __nbytes,				\
+		.buswidth = __buswidth,				\
+	}
+
+#define SPI_MEM_OP_NO_DUMMY	{ }
+
+#define SPI_MEM_OP_DATA_IN(__nbytes, __buf, __buswidth)		\
+	{							\
+		.dir = SPI_MEM_DATA_IN,				\
+		.nbytes = __nbytes,				\
+		.buf.in = __buf,				\
+		.buswidth = __buswidth,				\
+	}
+
+#define SPI_MEM_OP_DATA_OUT(__nbytes, __buf, __buswidth)	\
+	{							\
+		.dir = SPI_MEM_DATA_OUT,			\
+		.nbytes = __nbytes,				\
+		.buf.out = __buf,				\
+		.buswidth = __buswidth,				\
+	}
+
+#define SPI_MEM_OP_NO_DATA	{ }
+
+/**
+ * enum spi_mem_data_dir - describes the direction of a SPI memory data
+ *			   transfer from the controller perspective
+ * @SPI_MEM_DATA_IN: data coming from the SPI memory
+ * @SPI_MEM_DATA_OUT: data sent the SPI memory
+ */
+enum spi_mem_data_dir {
+	SPI_MEM_DATA_IN,
+	SPI_MEM_DATA_OUT,
+};
+
+/**
+ * struct spi_mem_op - describes a SPI memory operation
+ * @cmd.buswidth: number of IO lines used to transmit the command
+ * @cmd.opcode: operation opcode
+ * @addr.nbytes: number of address bytes to send. Can be zero if the operation
+ *		 does not need to send an address
+ * @addr.buswidth: number of IO lines used to transmit the address cycles
+ * @addr.val: address value. This value is always sent MSB first on the bus.
+ *	      Note that only @addr.nbytes are taken into account in this
+ *	      address value, so users should make sure the value fits in the
+ *	      assigned number of bytes.
+ * @dummy.nbytes: number of dummy bytes to send after an opcode or address. Can
+ *		  be zero if the operation does not require dummy bytes
+ * @dummy.buswidth: number of IO lanes used to transmit the dummy bytes
+ * @data.buswidth: number of IO lanes used to send/receive the data
+ * @data.dir: direction of the transfer
+ * @data.buf.in: input buffer
+ * @data.buf.out: output buffer
+ */
+struct spi_mem_op {
+	struct {
+		u8 buswidth;
+		u8 opcode;
+	} cmd;
+
+	struct {
+		u8 nbytes;
+		u8 buswidth;
+		u64 val;
+	} addr;
+
+	struct {
+		u8 nbytes;
+		u8 buswidth;
+	} dummy;
+
+	struct {
+		u8 buswidth;
+		enum spi_mem_data_dir dir;
+		unsigned int nbytes;
+		/* buf.{in,out} must be DMA-able. */
+		union {
+			void *in;
+			const void *out;
+		} buf;
+	} data;
+};
+
+#define SPI_MEM_OP(__cmd, __addr, __dummy, __data)		\
+	{							\
+		.cmd = __cmd,					\
+		.addr = __addr,					\
+		.dummy = __dummy,				\
+		.data = __data,					\
+	}
+
+#ifndef __UBOOT__
+/**
+ * struct spi_mem - describes a SPI memory device
+ * @spi: the underlying SPI device
+ * @drvpriv: spi_mem_driver private data
+ *
+ * Extra information that describe the SPI memory device and may be needed by
+ * the controller to properly handle this device should be placed here.
+ *
+ * One example would be the device size since some controller expose their SPI
+ * mem devices through a io-mapped region.
+ */
+struct spi_mem {
+	struct udevice *dev;
+	void *drvpriv;
+};
+
+/**
+ * struct spi_mem_set_drvdata() - attach driver private data to a SPI mem
+ *				  device
+ * @mem: memory device
+ * @data: data to attach to the memory device
+ */
+static inline void spi_mem_set_drvdata(struct spi_mem *mem, void *data)
+{
+	mem->drvpriv = data;
+}
+
+/**
+ * struct spi_mem_get_drvdata() - get driver private data attached to a SPI mem
+ *				  device
+ * @mem: memory device
+ *
+ * Return: the data attached to the mem device.
+ */
+static inline void *spi_mem_get_drvdata(struct spi_mem *mem)
+{
+	return mem->drvpriv;
+}
+#endif /* __UBOOT__ */
+
+/**
+ * struct spi_controller_mem_ops - SPI memory operations
+ * @adjust_op_size: shrink the data xfer of an operation to match controller's
+ *		    limitations (can be alignment of max RX/TX size
+ *		    limitations)
+ * @supports_op: check if an operation is supported by the controller
+ * @exec_op: execute a SPI memory operation
+ *
+ * This interface should be implemented by SPI controllers providing an
+ * high-level interface to execute SPI memory operation, which is usually the
+ * case for QSPI controllers.
+ */
+struct spi_controller_mem_ops {
+	int (*adjust_op_size)(struct spi_slave *slave, struct spi_mem_op *op);
+	bool (*supports_op)(struct spi_slave *slave,
+			    const struct spi_mem_op *op);
+	int (*exec_op)(struct spi_slave *slave,
+		       const struct spi_mem_op *op);
+};
+
+#ifndef __UBOOT__
+/**
+ * struct spi_mem_driver - SPI memory driver
+ * @spidrv: inherit from a SPI driver
+ * @probe: probe a SPI memory. Usually where detection/initialization takes
+ *	   place
+ * @remove: remove a SPI memory
+ * @shutdown: take appropriate action when the system is shutdown
+ *
+ * This is just a thin wrapper around a spi_driver. The core takes care of
+ * allocating the spi_mem object and forwarding the probe/remove/shutdown
+ * request to the spi_mem_driver. The reason we use this wrapper is because
+ * we might have to stuff more information into the spi_mem struct to let
+ * SPI controllers know more about the SPI memory they interact with, and
+ * having this intermediate layer allows us to do that without adding more
+ * useless fields to the spi_device object.
+ */
+struct spi_mem_driver {
+	struct spi_driver spidrv;
+	int (*probe)(struct spi_mem *mem);
+	int (*remove)(struct spi_mem *mem);
+	void (*shutdown)(struct spi_mem *mem);
+};
+
+#if IS_ENABLED(CONFIG_SPI_MEM)
+int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
+				       const struct spi_mem_op *op,
+				       struct sg_table *sg);
+
+void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
+					  const struct spi_mem_op *op,
+					  struct sg_table *sg);
+#else
+static inline int
+spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
+				   const struct spi_mem_op *op,
+				   struct sg_table *sg)
+{
+	return -ENOTSUPP;
+}
+
+static inline void
+spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
+				     const struct spi_mem_op *op,
+				     struct sg_table *sg)
+{
+}
+#endif /* CONFIG_SPI_MEM */
+#endif /* __UBOOT__ */
+
+int spi_mem_adjust_op_size(struct spi_slave *slave, struct spi_mem_op *op);
+
+bool spi_mem_supports_op(struct spi_slave *slave, const struct spi_mem_op *op);
+
+int spi_mem_exec_op(struct spi_slave *slave, const struct spi_mem_op *op);
+
+#ifndef __UBOOT__
+int spi_mem_driver_register_with_owner(struct spi_mem_driver *drv,
+				       struct module *owner);
+
+void spi_mem_driver_unregister(struct spi_mem_driver *drv);
+
+#define spi_mem_driver_register(__drv)                                  \
+	spi_mem_driver_register_with_owner(__drv, THIS_MODULE)
+
+#define module_spi_mem_driver(__drv)                                    \
+	module_driver(__drv, spi_mem_driver_register,                   \
+		      spi_mem_driver_unregister)
+#endif
+
+#endif /* __LINUX_SPI_MEM_H */
diff --git a/include/spi.h b/include/spi.h
index 9754c53aa1..938627bc01 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -9,6 +9,8 @@
 #ifndef _SPI_H_
 #define _SPI_H_
 
+#include <common.h>
+
 /* SPI mode flags */
 #define SPI_CPHA	BIT(0)			/* clock phase */
 #define SPI_CPOL	BIT(1)			/* clock polarity */
@@ -403,6 +405,15 @@ struct dm_spi_ops {
 		    void *din, unsigned long flags);
 
 	/**
+	 * Optimized handlers for SPI memory-like operations.
+	 *
+	 * Optimized/dedicated operations for interactions with SPI memory. This
+	 * field is optional and should only be implemented if the controller
+	 * has native support for memory like operations.
+	 */
+	const struct spi_controller_mem_ops *mem_ops;
+
+	/**
 	 * Set transfer speed.
 	 * This sets a new speed to be applied for next spi_xfer().
 	 * @bus:	The SPI bus