diff options
| author | Alison Wang <b18965@freescale.com> | 2017-05-16 10:45:57 +0800 |
|---|---|---|
| committer | York Sun <york.sun@nxp.com> | 2017-05-23 09:48:41 -0700 |
| commit | 615bfce5640c1b577f14d95d77f1b46dfd2b500e (patch) | |
| tree | b38da6c6620f1127b5793e7d7c76b4eaf7dc6582 /include | |
| parent | 3049a583f343a71ead9d7cb33f0ab6cecfbbaa12 (diff) | |
arm: ls1021a: Adjust memory mapping for Flash/SD card on LS1021AQDS/TWR
This patch is to adjust the memory mapping for FLash/SD card on
LS1021AQDS and LS1021ATWR, such as U-Boot start address on serial
Flash, QE firmware load address and environment address.
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/ls1021aqds.h | 10 | ||||
| -rw-r--r-- | include/configs/ls1021atwr.h | 10 |
2 files changed, 10 insertions, 10 deletions
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 373de40d29..5fcaf857fb 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -69,7 +69,7 @@ unsigned long get_board_ddr_clk(void); #endif #ifdef CONFIG_QSPI_BOOT -#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_TEXT_BASE 0x40100000 #endif #ifdef CONFIG_NAND_BOOT @@ -498,7 +498,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_FSL_DEVICE_DISABLE -#define CONFIG_SYS_QE_FW_ADDR 0x600c0000 +#define CONFIG_SYS_QE_FW_ADDR 0x60940000 #ifdef CONFIG_LPUART #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -549,14 +549,14 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_OVERWRITE #if defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET 0x300000 #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 #elif defined(CONFIG_NAND_BOOT) #define CONFIG_ENV_IS_IN_NAND @@ -564,7 +564,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 1ff3d9ee9e..2a20dec9ab 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -133,7 +133,7 @@ #endif #ifdef CONFIG_QSPI_BOOT -#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_TEXT_BASE 0x40100000 #endif #ifndef CONFIG_SYS_TEXT_BASE @@ -409,7 +409,7 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif -#define CONFIG_SYS_QE_FW_ADDR 0x600c0000 +#define CONFIG_SYS_QE_FW_ADDR 0x60940000 /* * Environment @@ -417,18 +417,18 @@ #define CONFIG_ENV_OVERWRITE #if defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET 0x300000 #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x20000 #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET 0x300000 #define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SIZE 0x20000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif |