EP88x: remove remainders of dead board

Commit 1b0757e deleted the EP88x entry from boards.cfg file.
But it missed to remove include/configs/EP88x.h and board/ep88x/.

This commit removes them and adds EP88x to README.scrapyard.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 187 deletions

diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h
deleted file mode 100644
index e6d1385aaa..0000000000
--- a/include/configs/EP88x.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Copyright (C) 2005 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- *
- * Support for Embedded Planet EP88x boards.
- * Tested on EP88xC with MPC885 CPU, 64MB SDRAM and 16MB flash.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MPC885
-
-#define CONFIG_EP88X				/* Embedded Planet EP88x board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xFC000000
-
-#define CONFIG_BOARD_EARLY_INIT_F		/* Call board_early_init_f	*/
-
-/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
-#define CONFIG_ENV_OVERWRITE
-
-#define	CONFIG_8xx_CONS_SMC1	1		/* Console is on SMC1		*/
-#define CONFIG_BAUDRATE		38400
-
-#define	CONFIG_ETHER_ON_FEC1			/* Enable Ethernet on FEC1	*/
-#define	CONFIG_ETHER_ON_FEC2			/* Enable Ethernet on FEC2	*/
-#if defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2)
-#define CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_MII_INIT		1
-#define FEC_ENET
-#endif /* CONFIG_FEC_ENET */
-
-#define CONFIG_8xx_OSCLK		10000000 /* 10 MHz oscillator on EXTCLK */
-#define CONFIG_8xx_CPUCLK_DEFAULT	100000000
-#define CONFIG_SYS_8xx_CPUCLK_MIN		40000000
-#define CONFIG_SYS_8xx_CPUCLK_MAX		133000000
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY	5		/* Autoboot after 5 seconds	*/
-#define CONFIG_BOOTCOMMAND	"bootm fe060000"	/* Autoboot command	*/
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock1 rw mtdparts=phys:2M(ROM)ro,-(root)"
-
-#define CONFIG_BZIP2		/* Include support for bzip2 compressed images  */
-#undef	CONFIG_WATCHDOG		/* Disable platform specific watchdog		*/
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP				/* #undef to save memory	*/
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)  /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* Max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x400000	/* Default load address		*/
-
-/*-----------------------------------------------------------------------
- * RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero)
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_SDRAM_MAX_SIZE	0x08000000	/* Up to 128 Mbyte		*/
-
-#define CONFIG_SYS_MAMR		0x00805000
-
-/*
- * 4096	Up to 4096 SDRAM rows
- * 1000	factor s -> ms
- * 32	PTP (pre-divider from MPTPR)
- * 4	Number of refresh cycles per period
- * 64	Refresh cycle in ms per number of rows
- */
-#define CONFIG_SYS_PTA_PER_CLK		((4096 * 32 * 1000) / (4 * 64))
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END		0x00500000	/* 1 ... 5 MB in SDRAM		*/
-
-#define CONFIG_SYS_RESET_ADDRESS	0x09900000
-
-/*-----------------------------------------------------------------------
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 KB for Monitor   */
-#ifdef CONFIG_BZIP2
-#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve ~4 MB for malloc()   */
-#else
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()  */
-#endif /* CONFIG_BZIP2 */
-
-/*-----------------------------------------------------------------------
- * Flash organisation
- */
-#define CONFIG_SYS_FLASH_BASE		0xFC000000
-#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible  */
-#define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* Max number of flash banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	512		/* Max num of sects on one chip */
-
-/* Environment is in flash */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE	0x20000		/* We use one complete sector	*/
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-
-#define CONFIG_SYS_OR0_PRELIM		0xFC000160
-#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | BR_PS_32 | BR_MS_GPCM | BR_V)
-
-#define	CONFIG_SYS_DIRECT_FLASH_TFTP
-
-/*-----------------------------------------------------------------------
- * BCSR
- */
-#define CONFIG_SYS_OR3_PRELIM		0xFF0005B0
-#define CONFIG_SYS_BR3_PRELIM		(0xFA000000 |BR_PS_16 | BR_MS_GPCM | BR_V)
-
-#define CONFIG_SYS_BCSR		0xFA400000
-
-/*-----------------------------------------------------------------------
- * Internal Memory Map Register
- */
-#define CONFIG_SYS_IMMR		0xF0000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2F00		/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Configuration registers
- */
-#ifdef CONFIG_WATCHDOG
-#define CONFIG_SYS_SYPCR		(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME  | \
-				 SYPCR_SWF  | SYPCR_SWE | SYPCR_SWRI | \
-				 SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR		(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME  | \
-				 SYPCR_SWF  | SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-#define CONFIG_SYS_SIUMCR		(SIUMCR_MLRC01 | SIUMCR_DBGC11)
-
-/* TBSCR - Time Base Status and Control Register */
-#define CONFIG_SYS_TBSCR		(TBSCR_TBF | TBSCR_TBE)
-
-/* PISCR - Periodic Interrupt Status and Control */
-#define CONFIG_SYS_PISCR		PISCR_PS
-
-/* SCCR - System Clock and reset Control Register */
-#define SCCR_MASK		SCCR_EBDF11
-#define CONFIG_SYS_SCCR		SCCR_RTSEL
-
-#define CONFIG_SYS_DER			0
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx chips			*/
-
-#endif /* __CONFIG_H */