diff options
| author | Jagannadha Sutradharudu Teki <jagannadha.sutradharudu-teki@xilinx.com> | 2014-01-09 01:48:13 +0530 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2014-01-10 15:18:33 +0100 |
| commit | 796d49969e2674f1f2ab8564ccc7b6cb62892e38 (patch) | |
| tree | f3b8f9fd891f2a9bf2356ef44c58561fb3f04b9a /include | |
| parent | 022b02064a04d5edf2dc8e7cdf666421eed9d888 (diff) | |
zynq: Add zynq zed board support
Zed is a complete development board based on the
Xilinx Zynq-7000 All Programmable SoC.
APSOC:
- XC7Z020-CLG484-1
Memory:
- 512 MB DDR3
- 256 Mb Quad-SPI Flash(
- Full size SD/MMC card cage
Connectivity:
- 10/100/1000 Ethernet
- USB OTG (Device/Host/OTG)
- USB-UART
Expansion:
- FMC (Low Pin Count)
- Pmod. headers (2x6)
Video/Display:
- HDMI output (1080p60 + audio)
- VGA connector
- 128 x 32 OLED
- User LEDs (9)
User inputs:
- Slide switches (8)
- Push button switches (7)
Audio:
- 24-bit stereo audio CODEC
- Stereo line in/out
- Headphone
- Microphone input
Analog:
- Xilinx XADC header
- Supports 4 analog inputs
- 2 Differential / 4 Single-ended
Debug:
- On-board USB JTAG programming port
- ARM Debug Access Port (DAP)
For more info - http://zedboard.org/product/zedboard
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/zynq_zed.h | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h new file mode 100644 index 0000000000..278db1ef9b --- /dev/null +++ b/include/configs/zynq_zed.h @@ -0,0 +1,24 @@ +/* + * (C) Copyright 2013 Xilinx, Inc. + * + * Configuration for Zynq Evaluation and Development Board - ZedBoard + * See zynq_common.h for Zynq common configs + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQ_ZED_H +#define __CONFIG_ZYNQ_ZED_H + +#define CONFIG_ZYNQ_SERIAL_UART1 +#define CONFIG_ZYNQ_GEM0 +#define CONFIG_ZYNQ_GEM_PHY_ADDR0 0 + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ZYNQ_SDHCI0 +#define CONFIG_ZYNQ_BOOT_FREEBSD + +#include <configs/zynq-common.h> + +#endif /* __CONFIG_ZYNQ_ZED_H */ |