ARM: remove broken "modnet50" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Thomas Elste <info@elste.org>

1 files changed, 0 insertions, 196 deletions

diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h
deleted file mode 100644
index 57707f38e6..0000000000
--- a/include/configs/modnet50.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * (C) Copyright 2004
- * IMMS, gGmbH <www.imms.de>
- * Thomas Elste <info@elste.org>
- *
- * Configuation settings for ModNET50 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7		1	/* This is a ARM7 CPU	*/
-#define CONFIG_ARM_THUMB	1	/* this is an ARM720TDMI */
-#define CONFIG_NETARM                   /* it's a Netsiclicon NET+ARM */
-#undef  CONFIG_NETARM_NET40_REV2        /* it's a Net+40 Rev. 2 */
-#undef  CONFIG_NETARM_NET40_REV4	/* it's a Net+40 Rev. 4 */
-#define CONFIG_NETARM_NET50             /* it's a Net+50 */
-
-#define CONFIG_MODNET50		1	/* on an ModNET50 Board      */
-
-#undef CONFIG_USE_IRQ			/* don't need them anymore */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_DRIVER_NETARMETH 1
-
-/*
- * select serial console configuration
- */
-#define CONFIG_NETARM_SERIAL
-#define CONFIG_SERIAL1		1	/* we use Serial line 1 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE		38400
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_JFFS2
-
-
-#define CONFIG_NETMASK          255.255.255.0
-#define CONFIG_IPADDR		192.168.30.2
-#define CONFIG_SERVERIP         192.168.30.122
-#define CONFIG_SYS_ETH_PHY_ADDR        0x100
-#define CONFIG_CMDLINE_TAG      /* submit bootargs to kernel */
-
-/*#define CONFIG_BOOTDELAY	10*/
-/* args and cmd for uClinux-image @ 0x10020000, ramdisk-image @ 0x100a0000 */
-#define CONFIG_BOOTCOMMAND	"bootm 0x10020000 0x100a0000"
-#define CONFIG_BOOTARGS		"console=ttyS0,38400 initrd=0x100a0040,530K " \
-					"root=/dev/ram keepinitrd"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP				/* undef to save memory	*/
-#define	CONFIG_SYS_PROMPT		"modnet50 # "	/* Monitor Command Prompt */
-#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
-#define	CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START	0x00400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x00800000	/* 4 ... 8 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x00500000	/* default load address	*/
-
-#define	CONFIG_SYS_HZ			900		/* decrementer freq: 2 kHz */
-
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
-*/
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 banks of DRAM */
-#define PHYS_SDRAM_1		0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x01000000 /* 16 MB */
-#define PHYS_SDRAM_2		0x01000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_2_SIZE	0x01000000 /* 16 MB */
-
-#define PHYS_FLASH_1		0x10000000 /* Flash Bank #1 */
-#define PHYS_FLASH_1_SIZE	0x00200000 /* 2 MB (one chip only, 16bit access) */
-
-#define PHYS_FLASH_2            0x10200001
-#define PHYS_FLASH_2_SIZE       0x00200000
-
-#define CONFIG_NETARM_EEPROM
-/* #ifdef CONFIG_NETARM_EEPROM */
-#define PHYS_NVRAM_1		0x20000000 /* EEPROM Bank #1 */
-#define PHYS_NVRAM_SIZE		0x00002000 /* 8 KB */
-/* #endif */
-
-#define PHYS_EXT_1		0x30000000 /* Extensions Bank #1 */
-#define PHYS_EXT_SIZE		0x01000000 /* 32 MB memory mapped I/O */
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_SIZE		PHYS_FLASH_1_SIZE
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	35	/* max number of sectors on one chip */
-#define CONFIG_SYS_MAIN_SECT_SIZE      0x00010000  /* main size of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* environment settings */
-#define	CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_NOWHERE
-
-#define CONFIG_ENV_ADDR		0x1001C000 /* environment start address */
-#define CONFIG_ENV_SECT_SIZE       0x10000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE		0x4000	/* max size for environment */
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00080000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"nor0=modnet50-0"
-#define MTDPARTS_DEFAULT	"mtdparts=modnet50-0:-@512k(jffs2)"
-*/
-
-#endif	/* __CONFIG_H */