Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscv

- Update SiFive Unleashed clock driver.
- Enables SiFive SPI driver and MMC SPI driver for SiFive Unleashed
  board

3 files changed, 97 insertions, 29 deletions

diff --git a/include/dt-bindings/clk/sifive-fu540-prci.h b/include/dt-bindings/clk/sifive-fu540-prci.h
deleted file mode 100644
index 531523ea62..0000000000
--- a/include/dt-bindings/clk/sifive-fu540-prci.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2019 Western Digital Corporation or its affiliates.
- *
- * Copyright (C) 2018 SiFive, Inc.
- * Wesley Terpstra
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __LINUX_CLK_SIFIVE_FU540_PRCI_H
-#define __LINUX_CLK_SIFIVE_FU540_PRCI_H
-
-/* Clock indexes for use by Device Tree data */
-
-#define PRCI_CLK_COREPLL		0
-#define PRCI_CLK_DDRPLL			1
-#define PRCI_CLK_GEMGXLPLL		2
-#define PRCI_CLK_TLCLK			3
-
-#endif
diff --git a/include/dt-bindings/clock/sifive-fu540-prci.h b/include/dt-bindings/clock/sifive-fu540-prci.h
new file mode 100644
index 0000000000..6a0b70a37d
--- /dev/null
+++ b/include/dt-bindings/clock/sifive-fu540-prci.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018-2019 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_SIFIVE_FU540_PRCI_H
+#define __DT_BINDINGS_CLOCK_SIFIVE_FU540_PRCI_H
+
+/* Clock indexes for use by Device Tree data and the PRCI driver */
+
+#define PRCI_CLK_COREPLL	       0
+#define PRCI_CLK_DDRPLL		       1
+#define PRCI_CLK_GEMGXLPLL	       2
+#define PRCI_CLK_TLCLK		       3
+
+#endif
diff --git a/include/linux/clk/analogbits-wrpll-cln28hpc.h b/include/linux/clk/analogbits-wrpll-cln28hpc.h
new file mode 100644
index 0000000000..03279097e1
--- /dev/null
+++ b/include/linux/clk/analogbits-wrpll-cln28hpc.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018-2019 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ */
+
+#ifndef __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H
+#define __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H
+
+#include <linux/types.h>
+
+/* DIVQ_VALUES: number of valid DIVQ values */
+#define DIVQ_VALUES				6
+
+/*
+ * Bit definitions for struct wrpll_cfg.flags
+ *
+ * WRPLL_FLAGS_BYPASS_FLAG: if set, the PLL is either in bypass, or should be
+ *	programmed to enter bypass
+ * WRPLL_FLAGS_RESET_FLAG: if set, the PLL is in reset
+ * WRPLL_FLAGS_INT_FEEDBACK_FLAG: if set, the PLL is configured for internal
+ *	feedback mode
+ * WRPLL_FLAGS_EXT_FEEDBACK_FLAG: if set, the PLL is configured for external
+ *	feedback mode (not yet supported by this driver)
+ */
+#define WRPLL_FLAGS_BYPASS_SHIFT		0
+#define WRPLL_FLAGS_BYPASS_MASK		BIT(WRPLL_FLAGS_BYPASS_SHIFT)
+#define WRPLL_FLAGS_RESET_SHIFT		1
+#define WRPLL_FLAGS_RESET_MASK		BIT(WRPLL_FLAGS_RESET_SHIFT)
+#define WRPLL_FLAGS_INT_FEEDBACK_SHIFT	2
+#define WRPLL_FLAGS_INT_FEEDBACK_MASK	BIT(WRPLL_FLAGS_INT_FEEDBACK_SHIFT)
+#define WRPLL_FLAGS_EXT_FEEDBACK_SHIFT	3
+#define WRPLL_FLAGS_EXT_FEEDBACK_MASK	BIT(WRPLL_FLAGS_EXT_FEEDBACK_SHIFT)
+
+/**
+ * struct wrpll_cfg - WRPLL configuration values
+ * @divr: reference divider value (6 bits), as presented to the PLL signals
+ * @divf: feedback divider value (9 bits), as presented to the PLL signals
+ * @divq: output divider value (3 bits), as presented to the PLL signals
+ * @flags: PLL configuration flags.  See above for more information
+ * @range: PLL loop filter range.  See below for more information
+ * @output_rate_cache: cached output rates, swept across DIVQ
+ * @parent_rate: PLL refclk rate for which values are valid
+ * @max_r: maximum possible R divider value, given @parent_rate
+ * @init_r: initial R divider value to start the search from
+ *
+ * @divr, @divq, @divq, @range represent what the PLL expects to see
+ * on its input signals.  Thus @divr and @divf are the actual divisors
+ * minus one.  @divq is a power-of-two divider; for example, 1 =
+ * divide-by-2 and 6 = divide-by-64.  0 is an invalid @divq value.
+ *
+ * When initially passing a struct wrpll_cfg record, the
+ * record should be zero-initialized with the exception of the @flags
+ * field.  The only flag bits that need to be set are either
+ * WRPLL_FLAGS_INT_FEEDBACK or WRPLL_FLAGS_EXT_FEEDBACK.
+ */
+struct wrpll_cfg {
+	u8 divr;
+	u8 divq;
+	u8 range;
+	u8 flags;
+	u16 divf;
+/* private: */
+	u32 output_rate_cache[DIVQ_VALUES];
+	unsigned long parent_rate;
+	u8 max_r;
+	u8 init_r;
+};
+
+int wrpll_configure_for_rate(struct wrpll_cfg *c, u32 target_rate,
+			     unsigned long parent_rate);
+
+unsigned int wrpll_calc_max_lock_us(const struct wrpll_cfg *c);
+
+unsigned long wrpll_calc_output_rate(const struct wrpll_cfg *c,
+				     unsigned long parent_rate);
+
+#endif /* __LINUX_CLK_ANALOGBITS_WRPLL_CLN28HPC_H */