armv8: ls1046afrwy: Add support for LS1046AFRWY platform

LS1046AFRWY board supports LS1046A family SoCs. This patch
add base support for this board.
Board support's 4GB ddr memory, i2c, micro-click module,microSD card,
serial console,qspi nor flash,ifc nand flash,qsgmii network interface,
usb 3.0 and serdes interface to support two x1gen3 pcie interface.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

3 files changed, 159 insertions, 2 deletions

diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 34b4756ed8..59c43f1ae1 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor
+ * Copyright 2019 NXP
  */
 
 #ifndef __LS1046A_COMMON_H
@@ -202,6 +203,15 @@
 #include <config_distro_bootcmd.h>
 #endif
 
+#if defined(CONFIG_TARGET_LS1046AFRWY)
+#define LS1046A_BOOT_SRC_AND_HDR\
+	"boot_scripts=ls1046afrwy_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1046afrwy_bs.out\0"
+#else
+#define LS1046A_BOOT_SRC_AND_HDR\
+	"boot_scripts=ls1046ardb_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1046ardb_bs.out\0"
+#endif
 #ifndef SPL_NO_MISC
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
@@ -232,8 +242,7 @@
 	"console=ttyS0,115200\0"                \
 	 CONFIG_MTDPARTS_DEFAULT "\0"		\
 	BOOTENV					\
-	"boot_scripts=ls1046ardb_boot.scr\0"    \
-	"boot_script_hdr=hdr_ls1046ardb_bs.out\0"	\
+	LS1046A_BOOT_SRC_AND_HDR		\
 	"scan_dev_for_boot_part="               \
 		"part list ${devtype} ${devnum} devplist; "   \
 		"env exists devplist || setenv devplist 1; "  \
diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h
new file mode 100644
index 0000000000..791bb8dc47
--- /dev/null
+++ b/include/configs/ls1046afrwy.h
@@ -0,0 +1,136 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __LS1046AFRWY_H__
+#define __LS1046AFRWY_H__
+
+#include "ls1046a_common.h"
+
+#define CONFIG_SYS_CLK_FREQ		100000000
+#define CONFIG_DDR_CLK_FREQ		100000000
+
+#define CONFIG_LAYERSCAPE_NS_ACCESS
+
+#define CONFIG_DIMM_SLOTS_PER_CTLR     1
+#define CONFIG_CHIP_SELECTS_PER_CTRL   4
+
+#define CONFIG_SYS_UBOOT_BASE		0x40100000
+
+/* IFC */
+#define CONFIG_FSL_IFC
+/*
+ * NAND Flash Definitions
+ */
+#define CONFIG_NAND_FSL_IFC
+
+#define CONFIG_SYS_NAND_BASE		0x7e800000
+#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
+
+#define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
+#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+				| CSPR_PORT_SIZE_8	\
+				| CSPR_MSEL_NAND	\
+				| CSPR_V)
+#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64 * 1024)
+#define CONFIG_SYS_NAND_CSOR	(CSOR_NAND_ECC_ENC_EN	/* ECC on encode */ \
+				| CSOR_NAND_ECC_DEC_EN	/* ECC on decode */ \
+				| CSOR_NAND_ECC_MODE_4	/* 4-bit ECC */ \
+				| CSOR_NAND_RAL_3	/* RAL = 3 Bytes */ \
+				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
+				| CSOR_NAND_SPRZ_128	/* Spare size = 128 */ \
+				| CSOR_NAND_PB(64))	/* 64 Pages Per Block */
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+#define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x7) | \
+					FTIM0_NAND_TWP(0x18)   | \
+					FTIM0_NAND_TWCHT(0x7) | \
+					FTIM0_NAND_TWH(0xa))
+#define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
+					FTIM1_NAND_TWBE(0x39)  | \
+					FTIM1_NAND_TRR(0xe)   | \
+					FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0xf) | \
+					FTIM2_NAND_TREH(0xa) | \
+					FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3		0x0
+
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+
+/* IFC Timing Params */
+#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM		0
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x52
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+#define I2C_RETIMER_ADDR			0x18
+
+/* I2C bus multiplexer */
+#define I2C_MUX_PCA_ADDR_PRI			0x77 /* Primary Mux*/
+#define I2C_MUX_CH_DEFAULT			0x1 /* Channel 0*/
+#define I2C_MUX_CH_RTC				0x1 /* Channel 0*/
+
+/* RTC */
+#define RTC
+#define CONFIG_SYS_I2C_RTC_ADDR		0x51  /* Channel 0 I2C bus 0*/
+#define CONFIG_SYS_RTC_BUS_NUM			0
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_SYS_MMC_ENV_DEV		0
+
+#define CONFIG_ENV_SIZE			0x2000		/* 8KB */
+#define CONFIG_ENV_OFFSET		0x500000	/* 5MB */
+#define CONFIG_ENV_SECT_SIZE		0x40000		/* 256KB */
+
+/* FMan */
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_FMAN_ENET
+
+#define QSGMII_PORT1_PHY_ADDR		0x1c
+#define QSGMII_PORT2_PHY_ADDR		0x1d
+#define QSGMII_PORT3_PHY_ADDR		0x1e
+#define QSGMII_PORT4_PHY_ADDR		0x1f
+
+#define FDT_SEQ_MACADDR_FROM_ENV
+
+#define CONFIG_ETHPRIME			"FM1@DTSEC3"
+
+#endif
+
+/* QSPI device */
+#ifdef CONFIG_FSL_QSPI
+#define FSL_QSPI_FLASH_SIZE		SZ_64M
+#define FSL_QSPI_FLASH_NUM		1
+#endif
+
+#undef CONFIG_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;"
+
+#include <asm/fsl_secure_boot.h>
+
+#endif /* __LS1046AFRWY_H__ */
diff --git a/include/fm_eth.h b/include/fm_eth.h
index 2e2ba756a0..729ad63cd5 100644
--- a/include/fm_eth.h
+++ b/include/fm_eth.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2009-2012 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP
  */
 
 #ifndef __FM_ETH_H__
@@ -41,8 +42,19 @@ enum fm_eth_type {
 	FM_ETH_10G_E,
 };
 
+/* Historically, on FMan v3 platforms, the first MDIO bus has been used for
+ * Clause 22 PHYs and the second MDIO bus for 10G Clause 45 PHYs (thus the
+ * TGEC name).
+ *
+ * On LS1046A-FRWY, the QSGMII PHY is connected to the second MDIO bus,
+ * and no TGEC ports are present on-board.
+ */
 #ifdef CONFIG_SYS_FMAN_V3
+#ifdef CONFIG_TARGET_LS1046AFRWY
+#define CONFIG_SYS_FM1_DTSEC_MDIO_ADDR	(CONFIG_SYS_FSL_FM1_ADDR + 0xfd000)
+#else
 #define CONFIG_SYS_FM1_DTSEC_MDIO_ADDR	(CONFIG_SYS_FSL_FM1_ADDR + 0xfc000)
+#endif
 #define CONFIG_SYS_FM1_TGEC_MDIO_ADDR	(CONFIG_SYS_FSL_FM1_ADDR + 0xfd000)
 #if (CONFIG_SYS_NUM_FMAN == 2)
 #define CONFIG_SYS_FM2_DTSEC_MDIO_ADDR	(CONFIG_SYS_FSL_FM2_ADDR + 0xfc000)