Merge with /home/hs/MAN/u-boot-dev

2 files changed, 362 insertions, 0 deletions

diff --git a/include/configs/uc101.h b/include/configs/uc101.h
new file mode 100644
index 0000000000..8cd8e9be70
--- /dev/null
+++ b/include/configs/uc101.h
@@ -0,0 +1,353 @@
+/*
+ * (C) Copyright 2003-2006
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU		*/
+#define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU)	*/
+#define CONFIG_UC101		1	/* UC101 board			*/
+
+#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
+
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_R
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
+#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps	*/
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/* Partitions */
+#define CONFIG_DOS_PARTITION
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_DISPLAY	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_DTT	| \
+				CFG_CMD_IDE	| \
+				CFG_CMD_FAT	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_SNTP	)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
+
+#if (TEXT_BASE == 0xFFF00000) /* Boot low */
+#   define CFG_LOWBOOT		1
+#endif
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT	"echo;" \
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addwdt=setenv bootargs ${bootargs} wdt=off"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm ${kernel_addr}\0"				\
+	"net_nfs=tftp 300000 ${bootfile};run nfsargs addip addwdt;bootm\0" \
+	"rootpath=/opt/eldk/ppc_82xx\0"					\
+	""
+
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
+
+#define CONFIG_MISC_INIT_R	1
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define CFG_IPBSPEED_133		/* define for 133MHz speed */
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
+#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+
+#define CFG_I2C_SPEED		100000 /* 100 kHz */
+#define CFG_I2C_SLAVE		0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR		0x58
+#define CFG_I2C_EEPROM_ADDR_LEN		1
+#define CFG_EEPROM_PAGE_WRITE_BITS	4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+/* for LM81 */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_PCF8563
+#define CFG_I2C_RTC_ADDR		0x51
+
+/* I2C SYSMON (LM75) */
+#define CONFIG_DTT_LM81			1	/* ON Semi's LM75		*/
+#define CONFIG_DTT_SENSORS		{0}	/* Sensor addresses		*/
+#define CFG_DTT_MAX_TEMP		70
+#define CFG_DTT_LOW_TEMP		-30
+#define CFG_DTT_HYSTERESIS		3
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_BASE		0xFF800000
+
+#define CFG_FLASH_SIZE		0x00800000 /* 8 MByte */
+#define CFG_MAX_FLASH_SECT	140	/* max num of sects on one chip */
+
+#define CFG_ENV_ADDR		(TEXT_BASE+0x40000) /* second sector */
+#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
+					   (= chip selects) */
+#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_CFI_AMD_RESET
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SIZE		0x4000
+#define CFG_ENV_SECT_SIZE	0x10000
+#define CFG_ENV_OFFSET_REDUND   (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR		0xF0000000
+#define CFG_DEFAULT_MBAR	0x80000000
+
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_SRAM_BASE		0x80100000	/* CS 1 */
+#define CFG_DISPLAY_BASE	0x80600000	/* CS 3 */
+#define	CFG_IB_MASTER		0xc0510000	/* CS 6 */
+#define CFG_IB_EPLD		0xc0500000	/* CS 7 */
+
+/* Settings for XLB = 132 MHz */
+#define SDRAM_DDR	 1
+#define SDRAM_MODE      0x018D0000
+#define SDRAM_EMODE     0x40090000
+#define SDRAM_CONTROL   0x714f0f00
+#define SDRAM_CONFIG1   0x73722930
+#define SDRAM_CONFIG2   0x47770000
+#define SDRAM_TAPDELAY  0x10000000
+
+/* SRAM */
+#define SRAM_BASE		CFG_SRAM_BASE	/* SRAM base address	*/
+#define SRAM_LEN		0x1fffff
+#define SRAM_END		(SRAM_BASE + SRAM_LEN)
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#else
+#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#endif
+
+
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE    TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT		1
+#endif
+
+#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(512 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC	1
+#define CONFIG_PHY_ADDR		0x00
+#define CONFIG_MII		1
+
+/*
+ * GPIO configuration
+ */
+#define CFG_GPS_PORT_CONFIG	0x4d558044
+
+/*use  Hardware WDT */
+#define CONFIG_HW_WATCHDOG
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	    */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16	/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+/* Enable an alternate, more extensive memory test */
+#define CFG_ALT_MEMTEST
+
+#define CFG_MEMTEST_START	0x00300000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000	/* 3 ... 15 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x300000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+/*
+ * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
+ * which is normally part of the default commands (CFV_CMD_DFL)
+ */
+#define CONFIG_LOOPW
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL		HID0_ICE
+#else
+#define CFG_HID0_INIT		0
+#define CFG_HID0_FINAL		0
+#endif
+
+#define CFG_BOOTCS_START	CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG		0x00045D00
+#define CFG_CS0_START		CFG_FLASH_BASE
+#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+
+/* 8Mbit SRAM @0x80100000 */
+#define CFG_CS1_START		CFG_SRAM_BASE
+#define CFG_CS1_SIZE		0x00100000
+#define CFG_CS1_CFG		0x21D00
+
+/* Display H1, Status Inputs, EPLD @0x80600000 8 Bit */
+#define CFG_CS3_START		CFG_DISPLAY_BASE
+#define CFG_CS3_SIZE		0x00000100
+#define CFG_CS3_CFG		0x00081802
+
+/* Interbus Master 16 Bit */
+#define CFG_CS6_START		CFG_IB_MASTER
+#define CFG_CS6_SIZE		0x00010000
+#define CFG_CS6_CFG		0x00FF3500
+
+/* Interbus EPLD 8 Bit */
+#define CFG_CS7_START		CFG_IB_EPLD
+#define CFG_CS7_SIZE		0x00010000
+#define CFG_CS7_CFG		0x00081800
+
+#define CFG_CS_BURST		0x00000000
+#define CFG_CS_DEADCYCLE	0x33333333
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef  CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card	Adapter	*/
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
+#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
+
+#define CONFIG_IDE_PREINIT	1
+/* #define CONFIG_IDE_RESET	1 beispile siehe tqm5200.c */
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	(0x0060)
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	(0x005C)
+
+/* Interval between registers                                                */
+#define CFG_ATA_STRIDE          4
+
+#define CONFIG_ATAPI            1
+
+/*---------------------------------------------------------------------*/
+/* Display addresses						       */
+/*---------------------------------------------------------------------*/
+#define CFG_DISP_CHR_RAM	(CFG_DISPLAY_BASE + 0x38)
+#define CFG_DISP_CWORD		(CFG_DISPLAY_BASE + 0x30)
+
+#endif /* __CONFIG_H */
diff --git a/include/dtt.h b/include/dtt.h
index a17aa67703..842a761c90 100644
--- a/include/dtt.h
+++ b/include/dtt.h
@@ -29,6 +29,7 @@
 
 #if defined(CONFIG_DTT_LM75) || \
     defined(CONFIG_DTT_DS1621) || \
+    defined(CONFIG_DTT_LM81) || \
     defined(CONFIG_DTT_ADM1021)
 
 #define CONFIG_DTT				/* We have a DTT */
@@ -58,6 +59,14 @@ extern int dtt_get_temp(int sensor);
 #define DTT_TEMP_SET		0x3
 #endif
 
+#if defined(CONFIG_DTT_LM81)
+#define DTT_READ_TEMP		0x27
+#define DTT_CONFIG_TEMP		0x4b
+#define DTT_TEMP_MAX		0x39
+#define DTT_TEMP_HYST		0x3a
+#define DTT_CONFIG		0x40
+#endif
+
 #if defined(CONFIG_DTT_DS1621)
 #define DTT_READ_TEMP		0xAA
 #define DTT_READ_COUNTER	0xA8