Merge git://git.denx.de/u-boot-fsl-qoriq

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	include/configs/ls1046aqds.h
	include/configs/ls1046ardb.h

7 files changed, 327 insertions, 101 deletions

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 0aa6fdd09a..98e902e0c6 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -354,7 +354,6 @@
 #endif
 
 #define CONFIG_CMDLINE_TAG
-#define CONFIG_CMDLINE_EDITING
 
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_LAYERSCAPE_NS_ACCESS
@@ -366,19 +365,131 @@
 
 #define CONFIG_FSL_DEVICE_DISABLE
 
+#include <config_distro_defaults.h>
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0)
+#include <config_distro_bootcmd.h>
 
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
 	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
 	"initrd_high=0xffffffff\0"      \
-	"fdt_high=0xffffffff\0"
+	"fdt_high=0xffffffff\0"		\
+	"fdt_addr=0x64f00000\0"		\
+	"kernel_addr=0x65000000\0"	\
+	"scriptaddr=0x80000000\0"	\
+	"scripthdraddr=0x80080000\0"	\
+	"fdtheader_addr_r=0x80100000\0"	\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernel_addr_r=0x81000000\0"	\
+	"fdt_addr_r=0x90000000\0"	\
+	"ramdisk_addr_r=0xa0000000\0"	\
+	"load_addr=0xa0000000\0"	\
+	"kernel_size=0x2800000\0"	\
+	BOOTENV				\
+	"boot_scripts=ls1021atwr_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1021atwr_bs.out\0"	\
+		"scan_dev_for_boot_part="	\
+			"part list ${devtype} ${devnum} devplist; "	\
+			"env exists devplist || setenv devplist 1; "	\
+			"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "				\
+				"${devnum}:${distro_bootpart} "		\
+				"bootfstype; then "			\
+				"run scan_dev_for_boot; "		\
+			"fi; "			\
+		"done\0"			\
+	"scan_dev_for_boot="				  \
+		"echo Scanning ${devtype} "		  \
+				"${devnum}:${distro_bootpart}...; "  \
+		"for prefix in ${boot_prefixes}; do "	  \
+			"run scan_dev_for_scripts; "	  \
+		"done;"					  \
+		"\0"					  \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
+	"installer=load mmc 0:2 $load_addr "	\
+		"/flex_installer_arm32.itb; "		\
+		"bootm $load_addr#ls1021atwr\0"	\
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
+		"sf probe && sf read $load_addr "	\
+		"$kernel_addr $kernel_size && bootm $load_addr#$board\0"	\
+	"nor_bootcmd=echo Trying load from nor..;"	\
+		"cp.b $kernel_addr $load_addr "		\
+		"$kernel_size && bootm $load_addr#$board\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 	"initrd_high=0xffffffff\0"      \
-	"fdt_high=0xffffffff\0"
+	"fdt_high=0xffffffff\0"		\
+	"fdt_addr=0x64f00000\0"		\
+	"kernel_addr=0x65000000\0"	\
+	"scriptaddr=0x80000000\0"	\
+	"scripthdraddr=0x80080000\0"	\
+	"fdtheader_addr_r=0x80100000\0"	\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernel_addr_r=0x81000000\0"	\
+	"fdt_addr_r=0x90000000\0"	\
+	"ramdisk_addr_r=0xa0000000\0"	\
+	"load_addr=0xa0000000\0"	\
+	"kernel_size=0x2800000\0"	\
+	BOOTENV				\
+	"boot_scripts=ls1021atwr_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1021atwr_bs.out\0"	\
+		"scan_dev_for_boot_part="	\
+			"part list ${devtype} ${devnum} devplist; "	\
+			"env exists devplist || setenv devplist 1; "	\
+			"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "				\
+				"${devnum}:${distro_bootpart} "		\
+				"bootfstype; then "			\
+				"run scan_dev_for_boot; "		\
+			"fi; "			\
+		"done\0"			\
+	"scan_dev_for_boot="				  \
+		"echo Scanning ${devtype} "		  \
+				"${devnum}:${distro_bootpart}...; "  \
+		"for prefix in ${boot_prefixes}; do "	  \
+			"run scan_dev_for_scripts; "	  \
+		"done;"					  \
+		"\0"					  \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
+	"installer=load mmc 0:2 $load_addr "	\
+		"/flex_installer_arm32.itb; "		\
+		"bootm $load_addr#ls1021atwr\0"	\
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
+		"sf probe && sf read $load_addr "	\
+		"$kernel_addr $kernel_size && bootm $load_addr#$board\0"	\
+	"nor_bootcmd=echo Trying load from nor..;"	\
+		"cp.b $kernel_addr $load_addr "		\
+		"$kernel_size && bootm $load_addr#$board\0"
 #endif
 
+#undef CONFIG_BOOTCOMMAND
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
+			   "&& esbc_halt; run qspi_bootcmd;"
+#else
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
+			   "&& esbc_halt; run nor_bootcmd;"
+#endif
+
+#define CONFIG_BOOTARGS			"console=ttyS0,115200 root=/dev/ram0"
+
 /*
  * Miscellaneous configurable options
  */
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 32f7162bbc..443a6657e6 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -259,29 +259,80 @@
 			"5m(kernel),1m(dtb),9m(file_system)"
 #endif
 
+#include <config_distro_defaults.h>
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0)
+#include <config_distro_bootcmd.h>
+#endif
+
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
-	"loadaddr=0x80100000\0"			\
 	"fdt_high=0xffffffffffffffff\0"		\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"kernel_start=0x61100000\0"		\
-	"kernel_load=0xa0000000\0"		\
+	"fdt_addr=0x64f00000\0"		 	\
+	"kernel_addr=0x65000000\0"		\
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"		\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernel_addr_r=0x81000000\0"		\
+	"fdt_addr_r=0x90000000\0"		\
+	"load_addr=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
-	"console=ttyS0,115200\0"                \
-	"mtdparts=" MTDPARTS_DEFAULT "\0"
+	"console=ttyS0,115200\0"		\
+	"mtdparts=" MTDPARTS_DEFAULT "\0"	\
+	BOOTENV					\
+	"boot_scripts=ls1043ardb_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1043ardb_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+		"part list ${devtype} ${devnum} devplist; "	\
+		"env exists devplist || setenv devplist 1; "	\
+		"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "			\
+				"${devnum}:${distro_bootpart} "	\
+				"bootfstype; then "		\
+				"run scan_dev_for_boot; "	\
+			"fi; "					\
+		"done\0"			\
+	"scan_dev_for_boot="					\
+		"echo Scanning ${devtype} "			\
+			"${devnum}:${distro_bootpart}...; "	\
+		"for prefix in ${boot_prefixes}; do "		\
+			"run scan_dev_for_scripts; "		\
+		"done;\0"					\
+	"boot_a_script="					\
+		"load ${devtype} ${devnum}:${distro_bootpart} "	\
+			"${scriptaddr} ${prefix}${script}; "	\
+		"env exists secureboot && load ${devtype} "	\
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} "	\
+			"&& esbc_validate ${scripthdraddr};"	\
+		"source ${scriptaddr}\0"			\
+	"installer=load mmc 0:2 $load_addr "	\
+		"/flex_installer_arm64.itb; "	\
+		"bootm $load_addr#ls1043ardb\0"	\
+	"qspi_bootcmd=echo Trying load from qspi..;"	\
+		"sf probe && sf read $load_addr "	\
+		"$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
+	"nor_bootcmd=echo Trying load from nor..;"	\
+		"cp.b $kernel_addr $load_addr "	\
+		"$kernel_size && bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
+			   "&& esbc_halt; run qspi_bootcmd;"
+#else
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
+			   "&& esbc_halt; run nor_bootcmd;"
+#endif
 
 #define CONFIG_BOOTARGS			"console=ttyS0,115200 root=/dev/ram0 " \
 					"earlycon=uart8250,mmio,0x21c0500 "    \
 					MTDPARTS_DEFAULT
-
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND		"sf probe && sf read $kernel_load "    \
-					"e0000 f00000 && bootm $kernel_load"
-#else
-#define CONFIG_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
-					"$kernel_size && bootm $kernel_load"
-#endif
 #endif
 
 /* Monitor Command Prompt */
@@ -292,8 +343,10 @@
 #define CONFIG_SYS_LONGHELP
 
 #ifndef SPL_NO_MISC
+#ifndef CONFIG_CMDLINE_EDITING
 #define CONFIG_CMDLINE_EDITING		1
 #endif
+#endif
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_MAXARGS		64	/* max command args */
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 1b91676c2d..7d7da91a0d 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -201,20 +201,72 @@
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
+#include <config_distro_defaults.h>
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0)
+#include <config_distro_bootcmd.h>
+#endif
+
 #ifndef SPL_NO_MISC
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
-	"loadaddr=0x80100000\0"			\
 	"ramdisk_addr=0x800000\0"		\
 	"ramdisk_size=0x2000000\0"		\
 	"fdt_high=0xffffffffffffffff\0"		\
 	"initrd_high=0xffffffffffffffff\0"	\
+	"fdt_addr=0x64f00000\0"                 \
+	"kernel_addr=0x65000000\0"              \
+	"scriptaddr=0x80000000\0"               \
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"         \
+	"kernelheader_addr_r=0x80200000\0"      \
+	"load_addr=0xa0000000\0"            \
+	"kernel_addr_r=0x81000000\0"            \
+	"fdt_addr_r=0x90000000\0"               \
+	"ramdisk_addr_r=0xa0000000\0"           \
 	"kernel_start=0x1000000\0"		\
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"console=ttyS0,115200\0"                \
-		MTDPARTS_DEFAULT "\0"
+		MTDPARTS_DEFAULT "\0"		\
+	BOOTENV					\
+	"boot_scripts=ls1046ardb_boot.scr\0"    \
+	"boot_script_hdr=hdr_ls1046ardb_bs.out\0"	\
+	"scan_dev_for_boot_part="               \
+		"part list ${devtype} ${devnum} devplist; "   \
+		"env exists devplist || setenv devplist 1; "  \
+		"for distro_bootpart in ${devplist}; do "     \
+		  "if fstype ${devtype} "                  \
+			"${devnum}:${distro_bootpart} "      \
+			"bootfstype; then "                  \
+			"run scan_dev_for_boot; "            \
+		  "fi; "                                   \
+		"done\0"                                   \
+	"scan_dev_for_boot="				  \
+		"echo Scanning ${devtype} "		  \
+				"${devnum}:${distro_bootpart}...; "  \
+		"for prefix in ${boot_prefixes}; do "	  \
+			"run scan_dev_for_scripts; "	  \
+		"done;"					  \
+		"\0"					  \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
+	"installer=load mmc 0:2 $load_addr "          \
+		"/flex_installer_arm64.itb; "          \
+		"bootm $load_addr#ls1046ardb\0"	 \
+	"qspi_bootcmd=echo Trying load from qspi..;"      \
+		"sf probe && sf read $load_addr "         \
+		"$kernel_start $kernel_size && bootm $load_addr#$board\0"
+
 
 #define CONFIG_BOOTARGS			"console=ttyS0,115200 root=/dev/ram0 " \
 					"earlycon=uart8250,mmio,0x21c0500 " \
@@ -228,10 +280,6 @@
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
 #define CONFIG_SYS_LONGHELP
 
-#ifndef SPL_NO_MISC
-#define CONFIG_CMDLINE_EDITING		1
-#endif
-
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_MAXARGS		64	/* max command args */
 
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 53cdcf2caf..9dc74b4f09 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -144,7 +144,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_XHCI_DWC3
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         3
-#define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
 #endif
 
@@ -460,6 +459,7 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_CMDLINE_TAG
 
+#undef CONFIG_BOOTCOMMAND
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_BOOTCOMMAND		"sf probe && sf read $kernel_load "    \
 					"e0000 f00000 && bootm $kernel_load"
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index 10af410136..3d3dfb1f8f 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -219,7 +219,6 @@
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_XHCI_DWC3
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         3
-#define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
 #endif
 #endif
@@ -239,10 +238,9 @@
 #endif
 
 #ifndef SPL_NO_MISC
-#define CONFIG_BOOTCOMMAND		"sf probe 0:0;sf read $kernel_load" \
-					"$kernel_start $kernel_size;" \
-					"bootm $kernel_load"
-
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot"	\
+			   "&& esbc_halt; run qspi_bootcmd;"
 #define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:1m(rcw)," \
 			"15m(u-boot),48m(kernel.itb);" \
 			"7e800000.flash:16m(nand_uboot)," \
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 6ce177e77e..6b943cdb32 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -235,7 +235,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 * 1024)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 * 1024)
 #elif defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_OFFSET		0x200000
+#define CONFIG_ENV_OFFSET		0x300000
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_ENV_SIZE			0x20000
 #endif
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 2a6aa8e20b..b86726fc0e 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -356,97 +356,113 @@ unsigned long get_board_sys_clk(void);
 	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 
+#ifdef CONFIG_QSPI_BOOT
+#define MC_INIT_CMD				\
+	"mcinitcmd=env exists secureboot && "	\
+	"esbc_validate 0x20700000 && "		\
+	"esbc_validate 0x20740000;"		\
+	"fsl_mc start mc 0x20a00000 0x20e00000 \0"
+#else
+#define MC_INIT_CMD				\
+	"mcinitcmd=env exists secureboot && "	\
+	"esbc_validate 0x580700000 && "		\
+	"esbc_validate 0x580740000; "		\
+	"fsl_mc start mc 0x580a00000 0x580e00000 \0"
+#endif
+
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
-#ifdef CONFIG_SECURE_BOOT
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
-	"scriptaddr=0x80800000\0"		\
-	"kernel_addr_r=0x81000000\0"		\
-	"pxefile_addr_r=0x81000000\0"		\
-	"fdt_addr_r=0x88000000\0"		\
-	"ramdisk_addr_r=0x89000000\0"		\
-	"loadaddr=0x80100000\0"			\
-	"kernel_addr=0x100000\0"		\
 	"ramdisk_addr=0x800000\0"		\
 	"ramdisk_size=0x2000000\0"		\
 	"fdt_high=0xa0000000\0"			\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"kernel_start=0x581000000\0"		\
-	"kernel_load=0xa0000000\0"		\
+	"fdt_addr=0x64f00000\0"			\
+	"kernel_addr=0x65000000\0"		\
+	"kernel_start=0x1000000\0"		\
+	"kernelheader_start=0x800000\0"		\
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"		\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernelheader_addr=0x580800000\0"	\
+	"kernel_addr_r=0x81000000\0"		\
+	"kernelheader_size=0x40000\0"		\
+	"fdt_addr_r=0x90000000\0"		\
+	"load_addr=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
-	"mcmemsize=0x40000000\0"		\
-	"fdtfile=fsl-ls2080a-rdb.dtb\0"		\
-	"mcinitcmd=esbc_validate 0x580700000;"  \
-	"esbc_validate 0x580740000;"            \
-	"fsl_mc start mc 0x580a00000"           \
-	" 0x580e00000 \0"                       \
-	BOOTENV
-#else
+	"console=ttyAMA0,38400n8\0"		\
+	MC_INIT_CMD				\
+	BOOTENV					\
+	"boot_scripts=ls2088ardb_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls2088ardb_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+		"part list ${devtype} ${devnum} devplist; "	\
+		"env exists devplist || setenv devplist 1; "	\
+		"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "			\
+				"${devnum}:${distro_bootpart} "	\
+				"bootfstype; then "		\
+				"run scan_dev_for_boot; "	\
+			"fi; "					\
+		"done\0"					\
+	"scan_dev_for_boot="					\
+		"echo Scanning ${devtype} "			\
+			"${devnum}:${distro_bootpart}...; "	\
+		"for prefix in ${boot_prefixes}; do "		\
+			"run scan_dev_for_scripts; "		\
+		"done;\0"					\
+	"boot_a_script="					\
+		"load ${devtype} ${devnum}:${distro_bootpart} "	\
+			"${scriptaddr} ${prefix}${script}; "	\
+		"env exists secureboot && load ${devtype} "	\
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} "	\
+			"&& esbc_validate ${scripthdraddr};"	\
+		"source ${scriptaddr}\0"			\
+	"installer=load mmc 0:2 $load_addr "			\
+		"/flex_installer_arm64.itb; "			\
+		"bootm $load_addr#ls2088ardb\0"			\
+	"qspi_bootcmd=echo Trying load from qspi..;"		\
+		"sf probe && sf read $load_addr "		\
+		"$kernel_start $kernel_size ; env exists secureboot &&"	\
+		"sf read $kernelheader_addr_r $kernelheader_start "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		" bootm $load_addr#$board\0"			\
+	"nor_bootcmd=echo Trying load from nor..;"		\
+		"cp.b $kernel_addr $load_addr "			\
+		"$kernel_size ; env exists secureboot && "	\
+		"cp.b $kernelheader_addr $kernelheader_addr_r "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		"bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
 #ifdef CONFIG_QSPI_BOOT
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
-	"scriptaddr=0x80800000\0"		\
-	"kernel_addr_r=0x81000000\0"		\
-	"pxefile_addr_r=0x81000000\0"		\
-	"fdt_addr_r=0x88000000\0"		\
-	"ramdisk_addr_r=0x89000000\0"		\
-	"loadaddr=0x80100000\0"			\
-	"kernel_addr=0x100000\0"		\
-	"ramdisk_size=0x2000000\0"		\
-	"fdt_high=0xa0000000\0"			\
-	"initrd_high=0xffffffffffffffff\0"	\
-	"kernel_start=0x21000000\0"		\
-	"mcmemsize=0x40000000\0"		\
-	"mcinitcmd=fsl_mc start mc 0x20a00000" \
-	" 0x20e00000 \0"                       \
-	BOOTENV
+/* Try to boot an on-QSPI kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND						\
+			"env exists mcinitcmd && env exists secureboot "\
+			"&& esbc_validate 0x20780000; "			\
+			"env exists mcinitcmd && "			\
+			"fsl_mc lazyapply dpl 0x20d00000; "		\
+			"run distro_bootcmd;run qspi_bootcmd; "		\
+			"env exists secureboot && esbc_halt; "
 #else
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
-	"scriptaddr=0x80800000\0"		\
-	"kernel_addr_r=0x81000000\0"		\
-	"pxefile_addr_r=0x81000000\0"		\
-	"fdt_addr_r=0x88000000\0"		\
-	"ramdisk_addr_r=0x89000000\0"		\
-	"loadaddr=0x80100000\0"			\
-	"kernel_addr=0x100000\0"		\
-	"ramdisk_addr=0x800000\0"		\
-	"ramdisk_size=0x2000000\0"		\
-	"fdt_high=0xa0000000\0"			\
-	"initrd_high=0xffffffffffffffff\0"	\
-	"kernel_start=0x581000000\0"		\
-	"kernel_load=0xa0000000\0"		\
-	"kernel_size=0x2800000\0"		\
-	"mcmemsize=0x40000000\0"		\
-	"fdtfile=fsl-ls2080a-rdb.dtb\0"		\
-	"mcinitcmd=fsl_mc start mc 0x580a00000" \
-	" 0x580e00000 \0"                       \
-	BOOTENV
-#endif
+/* Try to boot an on-NOR kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND						\
+			"env exists mcinitcmd && env exists secureboot "\
+			"&& esbc_validate 0x580780000; env exists mcinitcmd "\
+			"&& fsl_mc lazyapply dpl 0x580d00000;"		\
+			"run distro_bootcmd;run nor_bootcmd; "		\
+			"env exists secureboot && esbc_halt; "
 #endif
 
-
 #undef CONFIG_BOOTARGS
 #define CONFIG_BOOTARGS		"console=ttyS1,115200 root=/dev/ram0 " \
 				"earlycon=uart8250,mmio,0x21c0600 " \
 				"ramdisk_size=0x2000000 default_hugepagesz=2m" \
 				" hugepagesz=2m hugepages=256"
 
-#undef CONFIG_BOOTCOMMAND
-#ifdef CONFIG_QSPI_BOOT
-/* Try to boot an on-QSPI kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x20d00000" \
-			   " && bootm $kernel_start" \
-			   " || run distro_bootcmd"
-#else
-/* Try to boot an on-NOR kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580d00000" \
-			   " && cp.b $kernel_start $kernel_load $kernel_size" \
-			   " && bootm $kernel_load" \
-			   " || run distro_bootcmd"
-#endif
-
 /* MAC/PHY configuration */
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_PHYLIB_10G